bad driver for M1212nf MFP in Ubuntu

Similar Questions

• Product #: H5Q13AA #ABA, bad driver for hp device. CdRom SATA DVD has DS8A9SH

  Hello, my HP Pavilion 23 (product #: H5Q13AA #ABA) suddenly had his CD/DVD-Rom stop working.

  It's an hp device. CdRom SATA DVD has DS8A9SH.  I tried uninstalling the driver and using the HP troubleshooting tool.  Nothing seems to work.  Any suggestions?  The player is acting normally, apart from the computer not recognize (the disc spins when you put it in, etc.).

  I am running Windows 8.1 with all updated.

  When I try to update the driver, Windows says that it is up-to-date.  It gives me this error message in Device Manager:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Thanks in advance!

  Hello:

  Please read the info at the link below.

  One of the steps of resolution, 2, 3, 4 or 5 should solve the problem.

  http://support.Microsoft.com/kb/314060

• Need driver for PERC H310

  Hello dell and community!

  I never thought that I need to contact the community to the problem. However, now the day has come. Before describing the problem, I must say that your hardware and software provided is very good and I'm happy to use your equipment.

  I needed to install windows server 2003 x 86-based PowerEdge T420 (serial number: B4 * 2). I am well aware that this server is not designed for this operating system. Unfortunately, available only on a server and the decision of the tasks it involves the use of a dedicated server windows 2003 x 86 (used for the automation of industry), that is to say without virtualization.

  I found these instructions here:
  en.Community.Dell.com/.../3846.How-to-install-Windows-2003-on-Dell-12th-Generation-PowerEdge-Servers
  I have done it. However, after the installation of windows server 2003 x 86 me when with the logo displays BSOD (0x0000007b, ATA SATA mode is selected in the BIOS). Third party connection LiveUSB showed that shocks, unfortunately, are not created, even if I choose an option by pressing F8 before starting the system.

  I think that I stocked up on a bad driver for H310 flash drive, but there are doubts about this.

  USB stick with the driver for the appeared H310 tool

  NOTE from the ADMIN: Broken link has been removed / replaced this post by Dell >; l = en & s = gen & driverid = R140774

  The driver downloaded from here:
  www.avagotech.com/.../MegaRAID-SAS-9240-8i
  The MegaRAID SAS - XP x 86 signed, Version 4.32.0.32 driver name (in fact, I tried several different drivers, but for me it did not help).

  But, because of this doubt, if I choose to boot from a LiveUSB and point the driver like on a flash drive by utility Dell USB key F6 Driver utility, the sections are connected and well I can handle. LiveUSB, by the way, is based on Server 2003.

  Help me please. Apparently there is no relevant information, many files are not available, I've read these instructions here:
  en.Community.Dell.com/.../20384633
  en.Community.Dell.com/.../3846.How-to-install-Windows-2003-on-Dell-12th-Generation-PowerEdge-Servers
  en.Community.Dell.com/.../20472323
  en.Community.Dell.com/.../19457863
  en.Community.Dell.com/.../19523335
  thebackroomtech.com/.../a-Dell-PowerEdge-Server-Windows-2003-x64-and-the-Battle-Over-SAS-RAID-drivers

  What are the steps I take to performance windows server 2003?
  Thank you in advance, your team is great!

  First of all, I strongly suggest that you buy a server used on eBay or your local classifieds.

  Second, I suggest you that allows you to integrate the driver of your installation instead of the USB/F6 function media puff nLiteOS.com. (Integrate SP2 if not already included while you're there - the drivers might need SP2.)

  Are you sure that your "industry automation' may not work on a virtual platform? Many will work.

• LaserJet M1212nf MFP: How can I download a driver for Laserjet. The site seems to be an endless loop

  I try to use my Laserjet M1212nf MFP as a scanner.  I'm trying to download the driver so that I can do.  Currently, I can only print and copy.  When I use the hp Web site, it asks for my product, and then when I select it I'm directed to a picture of him and it is said below download drivers that takes me back to find my product.  How do the driver?  How can I use my Laserjet as a scanner?

  I found the HP folder and was able to scan.  It has not put an icon on my desktop as did my previous installations.

  When I talked to support the HP told me they had technical difficulties with the Web site.  They site immerses you in an endless loop.  If you need support you can call them direct to the 1-800-474-6836.

• Driver for HP LaserJet M1005 MFP for Windows 7

  Could not find driver for HP LaserJet M1005 MFP for Windows 7 please help soon

  @jayadurgacranes

  This product is supported by a plug-and-play printing and scanning to the driver which can be found here:

  product page M1005

• Driver for HP Color LaserJet MFP Pro M PCL 6

  64-bit driver for HP Color LaserJet Pro MFP M477 PCL 6: I have one of these printers, which is able to print double-sided automatically.  The new driver (64-bit) will not accept when I switched to a new laptop, manual duplex printing.  Does anyone else have this problem?  I updated the driver, but the problem persists.

  I managed to find the solution... it is a lot harder than I imagined composed I don't remember clearly how I found it.  But I think it's what you do... Use the control panel to get to the devices and printers, right-click for properties of the printer, then select device settings, then select installed in the duplex unit.  Yes... complicated.  How the average dumb guy like me never to solve such a problem?

• Please provide the URL to download the trackball explore 1.0 driver for Ubuntu Linux

  I reformatted my hard drive for Ubuntu Linux.
  I'll also need access to other drivers for Microsoft Natural Keyboard multimedia 1. 0a
  Thank you

  Hello

  Check out the links and check if that helps:

  http://www.Microsoft.com/hardware/en-us/d/Trackball-Explorer

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/look-for-driver-for-my-Microsoft-multimedia/57654d13-ba67-48BA-A800-ff5edb53e3fc

  If the problem is not resolved, see the link for the support of Ubuntu :

  http://www.Ubuntu.com/support

• DRIVER FOR VISTA OR DELL 1600N MFP PRINTER NOT TO "DRIVE" THE FUNCTIONS.

  DRIVER FOR VISTA FOR DELL 1600N MFP PRINTER NOT TO "DRIVE" THE FUNCTIONS. MORE SPECIFICALLY: 1) I CAN'T SCAN; 2.) I CAN'T REDUCE THE SIZE OF THE PAGE WHEN I PRINT. (3.) I CAN NOT SEND FAX.

  I INSTALLED THE RECOMMENDED DRIVE, BUT IT DOES NOT WORK. MY GUESS IS THAT I NEED TO UPGRADE VISTA TO A SUPERIOR VERSION OR A DOWNGRADE TO XP (WHICH THIS PRINTER WAS WORKING WELL ON).

  http://www.google.com.au/search?hl=en&source=HP&q=Dell+Support&Meta=&aq=f&aqi=G10&AQL=&OQ=&gs_rfai=

  Dell drivers and downloads.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

  Contact Dell printer drivers re OK.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Pavilion 14 - V223TX: HP Pavilion 14 - V223TX TOUCHPAD Driver for ubuntu

  Hello

  Since I got this new laptop for a while (HP Pavilion 14 - V223TX (Silver))
  , I have ubuntu 14.04 (for the second attempt 15.04) installed

  and multitouch scrolling does not work.

  XInput - list

  "PS2 generic mouse" not the alps driver or the touchpad.

  I searched a lot in the way of the of Internet

  like the dkms things and try to compile the driver modules, modprobe, etc.

  -nothing works.

  So I decided to post here and you are looking for help from all of you guys.

  Hope that there will be drivers for users of linux (ubuntu) for 'ALPs Touchpad' for this model of laptop.

  I am looking for your response.

  Thank you

  TEW

  I found the solution!

  You must update the kernel linux 4.2

  and the multitouch will be fine
  but the wireless driver will be broken

  next step, you have to find the wireless driver using the Wired internet, so please be prepared.

  After completing all the things driver
  everything to be perfect.

  

• Cannot install driver for printer HP LJ M1120n MFP HP 6570b laptop with win7 64 bit

  Installation driver Plug & Play doesn't work - it can not find the proper drivers.

  If I try to install the latest HP driver for win7 64 bit (from the HP site), it stops during the instalation (windows program stops due to unknown issues).

  If I try to install the 32-bit version of the driver complete Solution from HP site, it let me to the HP install window. By clicking on the "Install" button, it stops saying "Setup is not supported on this operating system, or the system does not meet the minimum requirements...". »

  printer: HP LJ M1120n MFP

  laptop: HP 6570b

  OS: windows 7 64-bit, selected, automatic driver update drivers on board cooler

  What to do next?

  I found no error in the event viewer, at least not a red icon.

  But I find the solution - in another forum thread. Here.

  1. I have connected the printer to get the error message,

  2. then downloaded and UNPACKED (no) LJM1120-COMPLETE-Solution driver installed (32-bit) here.

  3 went to Device Manager, find the printer,

  4. right click to get the link submenu "Update driver."

  5 choose the unzipped directory driver and let it update driver from there.

  Printer solved.

  Then did the same thing to scan, points 3 to 5.

• Windows 7 Pro x 64. uninstall a bad driver or other software for a 600F Canoscan get this error message: "this program is for Intel 32-bit compatible platforms only.

  I have Windows 7 Professional x 64.  I'm trying to uninstall a bad driver or other software for CanoScan 600F Flatbed scanner.  When I try to, I get this message: "this program is for Intel 32-bit compatible platforms only.  The program will be left. »

  It is therefore impossible for me to uninstall.

  I downloaded the 64-bit driver appropriate and installed, but that did not help: Windows does not recognize the existence of the device.  I guess that, until the messed up bad software is uninstalled, I can't install things right.  I managed to uninstall the good driver, but the wrong software is still there.  It appears in the list of programs in the Control Panel, but can not be uninstalled.

  So, how one uninstall when this message?

  (signed) Dennis G Drury

  Thank you, Kevin.

  Dennis G Drury

• installed slow start with driver for HP Color LaserJet CM2320nf MFP

  I have Windows 7 pro 64-bit installed. After that I installed the latest driver for HP Color LaserJet CM2320nf MFP, my network is not initialize 2 to 5 minuets and the PC won't start any programs until it does. The printer works very well after starting my network it's just frustrating to have to wait this long. I have the printer plugged into my Intellinet router and the printer set to DHCP for IP setting. I asked HP about this problem and they can't help me because it is a software problem and not hardware related

  Edit: I have a program of snooper network called Netscan indicates the printer working group is "WORKGROUP" and my working group is "MSHOME". This would cause problems? I can't find a way to change the workgroup printers.

  Jim

  Hello
   
  Perform the check and the boot if the problem persists.
   

  To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: perform step 7 to reset the computer to start as usual after the boot process.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Hope that helps.

• Best driver for Officejet Pro 8600 on Ubuntu Hardy

  I'm running Ubuntu Hardy (hplip 2.8.2). What is the best driver for the Officejet Pro 8600 (N911a)?

  Hello

  The 8600 Pro Officejet required HPLIP 3.11.10 version or above, I fear tha Ubunto Hardy is too old and does not support the model.

  As you can see below the device is supported only on Lucid or newer versions of Ubuntu:

  http://hplipopensource.com/hplip-Web/models/OfficeJet/officejet_pro_8600.html

  Shlomi

• Other driver for the LaserJet Pro MFP printer

  Can anyone suggest another driver for a Mac Mini (OS X 10.4.11) print on a LaserJet MFP M127fw PRO?

  Hi @suckerfish1,.

  I understand that you are looking for drivers for the 10.4 to use with the PRO LaserJet MFP M127fw. I can help you with this.

  Unfortunately 10.4, is not a supported operating system, there are no drivers available.

  Here are the supported Mac OS X operating systems: Mac OS X 10.6 Snow Leopard, OS X v10.7 Lion, v10.8 OS X Mountain Lion.

  HP LaserJet Pro MFP Color LaserJet MFP printers specifications M177fw Pro and M127fw.

  You must upgrade to 10.6, or get an another Laserjet supporting 10.4.

  Good day!
  Thank you.

• HP LaserJet Pro 100 color MFP: install the driver for color laserjet MFP m175a pro 100 failed at about 83%

  When I connected the printer to the system recognizes it as a cd player.

  I tried to install the driver (from the HP site), but it stopped at about 83% with General error msg.

  UAC is disabled and .net framework advanced fetures is not installed.

  I see an error in the event viewer, without and the error number:

  Message: The object of the communication, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state.
  Source: mscorlib

  Hey @yechiel-adar,.

  Welcome to the Forums of HP Support!

  I understand that your color HP LaserJet Pro 100 M175a multifunction fails to install on your computer Windows 8.1 as the computer recognizes your printer as a CD drive and the installation fails at 83%. I would like to help you to solve this problem today. To be honest, it sounds like there is a conflict between your computer and the HP Smart Install feature. Smart Install is a feature that has been programmed into the new models of Laserjet. It allows you to simply plug a USB cable and the installation files will load on your computer for you for faster and easier installation. However, on some computers systems rather find recognizing printers printers rather than software CDs. In this case, the installation never ends with success that your computer never actually detects the Laserjet Printer. That being said, I'll guide you through a few steps below to resolve this issue.

  Please, disconnect the USB cable from your computer before you continue.

  Step 1: Disable Smart Install:

  1. On the front panel of your printer, select the button Setup (key)
  2. Right arrow to the Service menu , and then select OK
  3. Right arrow key for Smart Install and select OK
  4. Please turn OFF Smart Install

  Once Smart Install turned offshore, please proceed to the next step.

  Step 2: Uninstall the drivers:

  For the purposes of troubleshooting, it is crucial that we have a clean slate to work with. Even if your ever successful installation there is a chance that a part of the software package and the pilot has made its way on your computer. To ensure that there are no problems when reinstall us your printer, I'll first you remove all traces of your printer from your computer.

  1. Open your screen to Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key
  2. On the start screen, type programs and features. Click on programs and features to run
  3. In the window programs and features will populate a list of the programs installed on your computer. Please scroll down and look for your HP Laserjet. If you see the Laserjet listed please select it and choose Uninstall
  4. Follow the instructions on the screen to complete the uninstallation. Once the uninstall is complete, please close programs and features and continue to the next step.

  Step 3: Delete the temporary files:

  1. Open your screen to Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key
  2. On the start screen please type run. Click on Run to launch the run dialogue box.
  3. In the run box, type %temp% , and then click OK
  4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  6. Close the Temp folder when it is empty
  7. R ight, click on the recycling bin on your desktop and select empty recycling bin

  Step 4: Install the device:

  1. Please click here to download and run the installer full feature software and driver for your printer
  2. Once the download is complete, follow the prompts on the screen to install your HP Laserjet Printer
  3. Do not connect the USB cable until the installation window invites you to

  Once the installation is completed successfully, please test print to confirm that your product works as normal.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!