Bad Flash in ASA, no smartnet either.

Similar Questions

• error message saying "TESV.exe - bad Image. d3dx9_42.dll not is either not designed to run on Windows or it contains an error.

  original title: Skyrim .dll error
  When I press play on the Skyrim Launcher button, nothing happens. I tried to open the folder and run the TESV.exe and got an error message saying "TESV.exe - bad Image. d3dx9_42.dll not is either not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the software vendor"I run Windows 7 Ultimate, and I've updated all my drivers and directX and uninstalled and reinstalled Skyrim repeatedly. I replaced the DLL in question and also organize sfc/scannow. Nothing seems to work, I tried all of the solutions I found online, nothing helps.

  I really want to start playing this game... huge fan of Elder Scrolls...

  Hi MattHamlyn,

   

  1. did you do with the last changes made to your computer before this show?

  2 you are logged as administrator?

  3 you are installing the game online or using a CD/DVD?

   

  
  

  I suggest you to follow the steps below and check.

   

  Method 1:

  I guess that your operating system is Windows 7 64 bit.

  1. click on the Start button.

  2. Select computers

  3. click on your C: drive

  4 program Files (x 86)

  5 steam
  6 Steamapps

  7 common

  8 Skyrim

  9 TESV
  TESV is the game itself.

   

   

  Method 2: put the computer to boot and check if you can play the game:

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

   

   

  I hope this helps.

  Thank you.

• Satellite U400 PSU44e - bad BIOS flash

  Hi all

  I had a big problem.
  Yesterday I was bios new flash 5.0 for my Toshiba u400, but he still on about 70% of 2 hours.
  I turn out of it.

  Then after plugging I see onlu black screen and nothing happends, I had something bios bad flash.

  I try with phoenix crisis recovery and a usb drive.
  I try with the toshiba via bootable CD bios update.
  I try to make the bootable CD with files BIOS.wph (and I change autorun.bat).

  I try this with the keys: fn + B, win + B and Fn + Esc (it's power led flashes after startup).

  What you suggest me?

  Service is the last option that I accepted.

  Concerning
  Alan

  Hello

  You should get in touch with Toshiba ASP in your country.

  Maybe the crisis disk BIOS could contribute to reflash the ROM module otherwise it could be possible that module ROM is damaged and motherboard needs to be replaced.

• Flashing PSU when connected to Atxpwr1

  I tried to solve my problem of power supply. After the reorganization of my desk, my computer would not turn on. My power supply blinks when it is plugged. I checked every connection and found that food has a solid green light when it is completely unplugged and plugged in, after checking every connection, that I think it flashes only when it is connected to the ATXPWR1 when it's not connected not there is a solid light. What can be done to fix this? My motherboard specifications are listed below.

  Thank you

  It's an old computer and I get a new but still would like to register it as well if it's worth.

  ----------------------------------------------------------------------

  Compaq Presario sr1320nx desktop computer

  Table of characteristics of motherboard:
  Form factor Micro-ATX form factor: 9.6 in x 9.6 in
  System BIOS Supplier Award
  AMD Athlon 64 processor with the support of the HyperTransport
  Socket 754 processor socket type
  The front-end processor 1600 MT/s @ 800 MHz bus frequency
  Maximum approved processor
  Athlon 64 3700 +.
  AMD Athlon 64 3400 +.
  SiS760 'North Bridge' Chipset
  SiS964 'South Bridge' Chipset
  Type of memory PC 2700 or PC 3200 DDR
  2 x 184-pin DIMM DDR memory sockets
  2.0 GB maximum memory
  Graphics no
  Graphical configuration upward
  Graphics connector (AGP) 1 AGP 8 x
  Audio AC97 integrated
  AC 97 CODEC device Realtek ALC658C 6 - channel CODEC
  Audio jacks (see legend below) 2 M (1F + 1 b), 2LI (1F + 1 b), LO, headphone connector
  Controller of® Realtek RTL8201CL LAN PHY Fast Ethernet LAN 10/100 Ethernet LAN supplier
  Configuration Ethernet built-in, low
  IEE 1394, VIA VT6307
  IEE 1394 front/rear Options 1F + 1 b
  SATA 2 SATA connectors connectors (supports a total of 2 players, 1 serial ATA - 150 hard drive on each connector)
  X UDMA 100/66/33 IDE UDMA 2 modes
  Expansion slots AGP (AGP/PCI/ex) 1, 3 PCI
  Up to 6 USB ports
  Options duplex USB until 2F + 4 b
  Series, floppy, parallel PS2 Keyboard and mouse 1s, 1 P, 1F, PS2 K + M

  Player in a power supply with all except the ATX connector connected to the motherboard is a bad idea.

  You can either rider the plug with the power supply outside of the case or use one of these unwanted PSU testers.

  The logiccircuit integrated into an ATX PSU requires an OK signal to the connector ATX switch and the motherboard.

• Shockwave flash 16.0.0.235 installed, there is a security risk, cannot update

  There is an obsolete page on the Adobe Flash website blocked by Firefox 35.0.1 under Windows 7. Version 16.0.0.235 of Flash is labeled a security risk, "Always enable" is grayed out. I was on the Plugins page, and there I clicked on the update now linktext. I have been informed that all the old versions of Flash in the range of version 11 are blocked. Anywhere where go to from there. (My screenshot has a piece off the coast the Plugins page over top of the resulting page when I clicked the links provided).

  Obsolete page being blocked has been received and I was able to run through the download process, but in the end, I got an error.
  I tried several times to download install_flashplayer16x32_mssd_aaa_aih.exe, that downloads OK, and when I run it it downloads and installs Adobe Flash, then said: finishing and "There was a mistake."

  Flash software Glary Utilities Update update Internet Explorer, says nothing about Firefox, now I know why. It is a mess.

  I opened firefox Pei and went into the new profile Virgin I had created sometimes back. He was happily running a fully compatible version of Flash 11 (I bet that wouldn't last long because my browser's biting me in the end and disables it).

  Firefox Pei and I created a new profile today. It has this crippled version 16.0.0.235 Flash.

  It seems that Mozilla has an obsolete page telling me that all the old versions in the range of version 11 are blocked. No word on the newer versions.

  From what I've read, others are in what concerns other browsers and come with a bad Flash, too. I don't have Firefox (well, Internet Exploder, which I cut like a piece of trash since they came out with IE 7).

  Any advice? Thank you.

  This is over my head. I called the big players to help you.

• Flash stuck on a site, do not charge not (still invisible) and has no error message

  Hello

  I like listening to a radio station, but every time I open their website the player built on top is simply not visible at all. It should be just above the add element, but it does not load: http://i.imgur.com/e14UPsy.png

  The site uses flash, but I flash (later) and have no problems on other sites using such as Youtube, Dailymotion or Vimeo. It is also listed in my add on the page and checking Web site runs correctly.

  However I can't do a lot on the radio site, because nothing is visible on the player.

  The website is: http://seoul.fm/

  I tried IE which I use only to see if something is a browser issue or a problem of site and the player is loading properly in this browser.

  I get no error message, pop - up or anything like that when visiting it through Firefox.
  I also installed the last Javaa to see if that was the problem and he checked the website Javaa which he works.

  Flash is not blocked in the add menu.

  I've disabled all my add block extension to see if it caused the problem. No results.

  On IE, I need to activate Flash runtime to run it.
  I don't think that it is a Javascript problem but Flash script (I said in a response that maybe it's java partner but that is not true, I think).

  Hi BlueWaffle, I should have checked before: after that I agree the Flash, I hear no audio, either.

  What I see in Google Chrome, it's that the player uses the HTML5 audio tag and Flash is only used in the comment box. If Flash is not the problem. The problem is that the script that generates the area of the drive is not running. This page is very complex, using plenty of write-back loading, and I can't follow it very well. After 45 minutes, I give up.

• After you have installed Mozilla Firefox with Adobe Flash Player 11.6 20.0, videos YouTube do not load correctly.

  Videos YouTube has of worked before installing Adobe Flash Player. Once installed the screen flickers, after a second, rewind at the start, then plays normally. This only happens when I use Internet Explorer. I reinstalled Mozilla Firefox and Adobe Flash Player several times but nothing seems to work. Decommissioning of Adobe Flash Player does not work either. It seems that Firefox is the problem, but I'm not completely sure.

  You can check for problems with the latest version of the Flash plugin and try these:

  • disable an eventual extension of the browser for Firefox Plugin RealPlayer Record and if installed RealPlayer update
  • disable the safe_mode in Flash 11.3 and later versions
  • turn off hardware acceleration in the Flash plugin
  • http://KB.mozillazine.org/Flash#troubleshooting
  • http://helpx.Adobe.com/Flash-Player/KB/Flash-Player-113-crash-Mozilla.html

• Satellite Pro A300-1PW - BIOS flash not successfully

  Hello

  I've updated the BIOS most recent on the Web from Toshiba site and my laptop froze now give a bad BIOS flash.
  All I get now is a white screen and the hard drive light flashes is anyway out of a bad flash

  I have a Toshiba Satellite Pro A300-1PW system
  Model number psag9e

  Thank you
  ADE

  I'm afraid there is not much you can do about it. The BIOS chip is ruined.
  Contact the nearest Toshiba service as soon as possible. They can help you with this.

• Flash memory card data verification, how to compare folders/files in Labview?

  Hi, I need to check and verify the data that is stored in a Flash memory card, sience I got a good card Flash contant, I hv to write a VI to check suspected bad Flash card data against Flash memory good data card, I use the output folder list folder list function is compared with the data of constant string that contains the name of folder and files (since I know the content good map).

  Is there any other method to compare the data/files/folders, such as the CRC check for data... all all tracks, ideas? Please help me.

  Thanks in advance,

  Ravikumar C

  The range of the file IO has a function to perform an MD5 on a file.  If you want to detect the validity of a set of files, what happens if you had a list of files and md5s and then conducted an audit to see if all the files have the MD5 expected.  Of course, you will need to take a line of well known file-based and MD5s.

• How can I Flash BIOS of my laptop BACK?

  I think it's much safer flashing the BIOS of the computer in the BACK rather than Windows. Usually make a boot disk 98 on my flash drive and Flash the BIOS in this way. Normally, the flash utility is a single file that contains the BIOS file. I got the update to the BIOS of my laptop, and it retrieves the number of files. I don't know if it'll work in the BACK.

  My laptop is a Pavilion dm4-2165dx.

  You are absolutely right.

  I also think the same as you.

  Unfortunately, the flashes of BIOS for most HP notebooks to consumers including yours, should be run in Windows.

  I disassembled the files on some consumer notebook BIOS and there is no file Flash bin BACK to put on a flash drive.

  When I'm forced to use a flash based on windows, I either make sure that the antivirus program is cut, or I run the flash BIOS in windows safe mode where there is a minimum of current process.  Normally the antivirus program does not in WSM either.

• Inserting a Flash Drives and cell phone causes blue screen - stop 0x3B

  Original title: inserting a few Flash Drives, but not all, and cell phone causes a blue screen of death

  Computer Dell Inspiron 518 Intel core 2 quad, 6 GB memory, office 2 years.
  HP Vista 64-bit, Service Pack 2, updated version 6.0.6002 fully implemented.
  No change to HW or SW immediately before the first detected failure, but the USB port which is not often used.
  History - off Ready Boost after a short experience and installed months ago driver and card Renesas Electronics USB 3.0.  This driver has been disabled through all of this, but I've not yet physically removed the card.  Disable ready boost was simply to stop - no other instructions not found for removal.

  Anitvirus BitDefender and Malwarebytes scans are both clean.

  A flash drive works fine, but three others cause seconds blue screen of death after installing into any USB port.   Bought a new flash drive and it also causes a crash.  Found cell phone also gives BSOD.  All work fine on another computer.  USB is currently led printer, external hard drive, digital camera downloads and keyboard/mouse very well.  Tried both USB ports with the same results and back and disconnected all other USB devices except the keyboard and mouse.  Remove and reinstall all USB drivers (6) one by one (the 1CH9 Intel USB controllers host family) and USB controllers enhanced (2);  also storage device USB and device drivers USB Composite and façade drivers card reader.  After each new facility, any 'bad' flash player causes immediate crash.  'Good' flash player's Centron Centon Pro 8 GB and one of bad flash drives is one attached PNY 8 GB, another a San Disk.  I think, but I don't remember, that the 'good' flash player was installed for Ready Boost test.

  Unable to find a failure code or no trace of several accidents in the problem reports.   Here is all the data of failure that I could find:

  0x0000003B
  (0x00000000c0000005)
  0xfffff8002a8db87
  0xfffffa601

  I'm puzzled.  Thanks in advance.

  Tom

  Hello

   
  You must update the BIOS (Basic Input Output System) and the Pilots of the Chipset using the computer manufacturer.

• (Redirected) Reference Dell 1815n-photocopier/printer/fax(Error file format not supported trying to print from a USB flash drive stick)

  So I saved for different types of documents on a flashdrive (PDF, Word, Excel) and after having placed the flash stick drive in port on my Dell 1815n, an error pops up that States format not supported for files. I have formatted the USB stick, but cannot get anything to print. I tried 2 different flash drives to ensure that either has not been corrupted? Any help?

  Best of this post in the Forum of devices/printers, here:

  http://en.community.Dell.com/forums/3528.aspx

  Bev.

• A malfunction of the Flash Player

  For some time, flash player is a functioning either using Firefox or Chrome, but its ok with IE or Ironportable (a Chrome like).

  I use windows 7 Professional.

  Firefox 19.0

  Shockwave Flash 11.6.602.168

  I tried the official solutions to this question (question you have problems to run games that use Flash Player, audio or video)

  Solutions

  1. Make sure that the latest version of Flash Player is installed etc..) with no result.

  I tried to disable plug-ins Firefox (an or grouped) without success.

  What can I do?

  What kind of problems are you having?  You can visit this page to see which version of Flash Player is reported as installed?

  Version of Flash Player

  In addition, please try the troubleshooting steps described in this FAQ for Firefox:

  How to solve the safe_mode of Flash Player for Firefox?

  Thank you

  Chris

• Flash Player white (all black or all white) on multiple sites

  On a number of sites (for example: www.thedailyshow.com) Flash video area is empty, either all black or all white.  Flash works on most of the other sites and all Flash ads, including on pages where the main flash video is empty. (See attached image)

  It's on a Win7 HP, 64-bit using IE9 and Adobe Flash 11.1.102.55. (more details below)

  This lasts for about two weeks.  I did all the standard stuff:

  Off to hardware acceleration, checked the box 'Use software rendering instead of GPU rendering'; persons with disabilities followed by protection; has confirmed that the Shockwave Flash add-on has been activated; temporarily the security value low. see the page in Firefox. uninstalled and reinstalled Adoble Flash; Uninstalled and installed Flash Flash 10.3.  Nothing is no good.  I hope someone can help. Thank you

  ------------------
  Information System
  ------------------
  Operating system: Windows 7 Home Premium 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110622) - 1506
  System manufacturer: Dell Inc..
  System model: Inspiron 620
  Processor: Intel (r) CPU of Core i3-2100 3.10 GHz (4 CPUs), ~3.1GHz
  Memory: 4096 MB RAM

  ---------------
  Display devices
  ---------------
  Card name: Intel(r) HD Graphics Family (onboard graphics)

  Driver version: 8.15.10.2509
  Driver date: 31/08/2011

  Would be WHQL logo: Yes

  ---------------

  Browser

  ---------------

  IE9 (64 and 32 bit) Version 9.0.8112.16421
  Adobe Flash 11.1.102.55.

  

  Did you go to %appdata%/adobe/ and %appdata%/macromedia/ to remove the Flash Player folder in each?

• BrowserLab provides stable version previous Flash Player?

  Basically, I need to see how our pages, which include Flash widgets and should be accessible, is shaping up in Flash Player 7 and 8 and sometimes even in version 6. Is this possible? I thought that browsercam.com might do, but apprently not, I think I can install Macromedia Flash Player to archives on a server without Flash, mobile... but if not, I need a solution to test how older versions of Flash handle our stuff.

  Cheers.

  The answer is no, this is currently not possible using BrowserLab, and frankly, unless this is not likely to be something that we we Landa in the near future, we see a lot of requests.

  There are a few reasons why:

  • Content Flash is usually on the animations based on frames. BrowserLab takes static screen captures, so to show how works your Flash content, it will take either a number of shots of your page, or even a video. These two would be fairly resource intensive and costly for us
  • BrowserLab is currently supported 15 browser/operating system combinations. To support same 2 old versions of Flash in combination with the browsers/OS would multiply our needs of material far too

  Mark