Bad operating system when I have lots of system restore

Similar Questions

• Bad operating system has been installed. How can this be corrected?

  Hello. My uncle recently gave me her computer. He told me that he had somehow crashed his computer and reinstalled a new operating system. The problem is, he has installed an operating system for a Dell Windows XP. More than half of nothing works now, no wonder... In addition, this new operating system must be activated. It doesn't have the disk, he used or a product key the same unlock his computer. Could I download the correct operating system on a flash drive or burn the disc myself? Thank you for all your comments.

  Product: Presario R4000

  Windows XP Home Edition HP 2004

  S/N: [number of Series edited by Moderator]

  P/N: PX356UA #ABA

  If you need any other number located on the laptop it please let me know. Thanks again for your help.

  Hello

  He is a third-party site where you can try to get a set for your device recovery disk. But don't know whether they have it or not.

  http://www.restoredisks.com/

• bad operating system for installation

  Hello world

  I tried to install LR6.

  Before installing said software that the operating system does not meet the system requirements. The software does not work with 'Vista '. However, my operating system is Windows 7.

  If anyone can help?

  Hi limr12436141,

  Please refer to the below thread:

  trying to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

  Let us know if that helps.

• How can I get my operating system restored?

  My laptop (64 bit) crashed while trying to install Windows 10 of a download.

  I thought that Norton had the necessary backup to restore.  Not true!

  Now, no operating system is recognized.

  Do anyone know how I can restore the original Windows 7 Home Premium because it was already on the laptop when buying?

  Thank you

  http://Windows.Microsoft.com/en-AU/Windows-10/Windows-10-recovery-options

  Your laptop came with a partition recovery or recovery discs? If your laptop did not come with recovery discs, you created a disaster recovery support when you got the laptop?

  If not, have you contacted the manufacturer of your laptop to get recovery media to restore your computer to the previous operating system?

  Otherwise you can reinstall Windows (clean) 10

  If this does not work, you can use the same installation media to reinstall Windows (also called a new installation of Windows) 10.

  Warning

  • This will delete all your files, applications and drivers you have installed, apps and customizations from your manufacturer of PC and the changes made to the settings.

  1. On a working PC, go to download the software from the Microsoft Web site.

  2. Download the multimedia authoring tool and then run it.

  3. Select create the installation media for another PC.

  4. Choose a language, edition and architecture (64-bit or 32-bit).

  5. Follow the steps to create installation media, and then click Finish.

  6. Connect the installation media that you created on your PC does not work and then turn it on.

  7. On the initial Setup screen, enter your language and other preferences and select next. If you do not see the configuration screen, your PC can not configured to boot from a drive. See your PC manufacturer's Web site for information on how to change the boot sequence of your PC and then try it again.

  8. Select Install now.

  9. On the box, enter the product key to activate Windows page, enter a product key if you have one. If you have upgraded to Windows 10 free or bought and activated Windows 10 of the Windows store, select Skip and Windows activates automatically later. For more information, see Activation in Windows 10.

  10. On the license terms page, select I accept the license terms (if you agree to them), and then select next.

  11. On the type of installation do you want? page, select custom.

  12. On the place where you want to install Windows? page, select a partition, select a formatting option (if necessary) and then follow the instructions.

  13. When you are finished formatting, click Next.

  14. Follow the rest of the installation instructions to complete the installation of Windows 10.

  Ref: http://windows.microsoft.com/en-au/windows-10/windows-10-recovery-options

• Qosmio G20: I'll lose all reinstall operating system restore CD downloads

  I installed Vista on my laptop Qosmio G20 and am happy with how it works.
  If I use the recovery cd I lose all my I-Tunes downloads while reinstalling the operating system XP?

  You will lose if all downloads are saved on the C partition. Before recovery procedure starts the HARD drive (or chooses the partition) will be formatted and all data will be gone.

  Because of this data backup and install WXP using the recovery DVDs delivered.

• Windows Live 2011 Messemger shows bad "disk space" when I have more free 20GBs

  Since I upgraded to WLM 2011, whenever a file is transferred to me, WLM will say: "the file has been transferred not because your computer is out of disk space. Try to delete some files, and then ask the sender to start the transfer. »

  I changed places where to transfer them to, I made sure it goes on the appropriate drive, I've checked everything and it still glitches like that. I CAN send files to others and nothing else is affected, just the file transfer, it is as if all are blocked for reasons of this error. I have the space, I even recently cleaned up several GB of memory, it's as if WLM 2011 is not even checking the right player and yet it is assigned to the hand. Overall, there is apparently no reason that he should behave in this way. As far as I know, I'm the only one with this bug. It persists regardless of the computer restart or WLM 2011.

  All means to solve this problem? Old WLM that would never do something must have broken during the upgrade to WLM 2011, maybe I should run repair?

  Update: repair did not set it

  Hello

  they will help you with your questions/problems Messenger when repost you the link below in the Messenger forums

  http://windowslivehelp.com/product.aspx?ProductID=2

• Bad operating system for download

  I am trying to download adobe audition 3.0. He tells me I have the wrong system of BONES. I have windows 8. Is there a way to get around this? I'm trying the product I bought some time ago. Thank you!

  You should see the following bewfore try again...

  Error: Unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

• Where can I find Firefox for BADA operating system for model GT-S8530 Wave 2 mobile of Samsung

  I want to Firefix for my Samsung Wave 2 BADA OS model GTS-8530. Please provide as soon as possible with the installation of Flash player

  It is not a question to love or not to love of BADA. It's the fact that there is a limited quantity development time that Mozilla has. Because of these limitations, focusing on the largest market share of phone is something that needs to be done.

• What is the best way to restore the operating system to Windows XP?

  I don't have a restore cd. I have a corup large files in the Window XP operating system & restore point fail & did not save at all. I may have to save all the files & nuke all over again, but not CD of resettlement to the SOS HDD. Thank you

  Some manufacturers (like Dell and HP) computer include a partition recovery system on the hard disk that you can use to restore the computer as long as the plant.  Check the manual for your computer.

• Satellite A100-784: fact partition system restore DVD formats

  Hi guys,.

  I would ask you for help :)

  I have a Toshiba Satellite A100-784 with Windows Vista Home Basic OEM.
  I have this Toshiba system recovery DVD. If I press F8 during start up I get to the screen where are some options (repair at startup etc.) but I'm interesting in 'Exploitation Windows System Restore'.
  I have two partitions (C:, D :), the system partition is C: :)
  So, I would ask if I use this "Exploitation Windows System Restore" there he reformatted data on the D: partition as well?

  If I press F8 when booting I get to the menu, I chose this computer repair and after that there are options:

  1 startup repair.)
  2 system restore.)
  Restoration complete 3 PC.) Windows
  Memory 4 Diagnostic tool.) Windows
  5. command prompt)
  6 operating system restore.) Windows

  Is it possible to use one of these function just to reinstal C: partition without losing data on the D: partition?

  Thanks for the reply :)

  Post edited by: jakoty

  Hi friend

  usually the system restore the c: partition fair DVD formats, so if you have two separate partitions, the restore DVD should leave the D: partition intact.
  In your case I would choose point 6. (Operating system restore) that supposedly only restores the operating system, which means that it scratches the C: drive...

  Welcome them

• Menu start cannot open or pane of Notification after system restore

  I think I might have discovered what caused my problem with opening the menu start before. I had an operation system restore and now cannot open the start menu or the notification pane. I tried to cancel the system restore, but that did not help. Does anyone know how to fix this without using the Windows restore feature? I tried editing the registry found here, but it did not work. The haptic feedback that happens by pressing the soft Windows button on the front of the computer worked again (because it is not this worthless), but the start menu still does not open.

  Hello

  Thanks for posting your question on the Microsoft forums.

  I understand that you are in a frustrating situation because you are facing problems with access to the start menu in the Windows 10 Technical Preview 9926 build. Please provide the following information to help you in a better way.

  1. do you get an error message when you try to access the Start button?

  2. What is the brand and model of the computer?

  I suggest you to refer to the suggestion of Sharath Srinivasa from the following link and check if you can access the start menu.

  http://answers.Microsoft.com/en-us/Insider/Forum/insider_wintp-insider_search/start-menu-doesn

  I hope this helps.

  Please post back with the State of the question and we will be happy to help you further.

• System Restore error # 0 x 80070057 on Vista OS

  I tried to run the system on my Vista operating system restore, I have rec'd msg of error, incorrect parameter.0x80070057.

  I was able to use sys res in SafeMode only.

  Is there a way to fix this or do I have to reinstall Windows?

  Any help will be greatly appreciated.

  Thank you

  Ray

  Hello

  1 did you change on your computer before this problem?

  2. why you try to run the system restore?

  You can follow the suggestions and then check.

  Method 1

  Run the System File Checker tool.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2

  Check to see if the problem exists in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Method 3

  Security software disable temporary and check.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• I have a problem on my windows xp sp3 operating system when I right click any icon I got accident error?

  I have a problem on my windows xp sp3 operating system when I right click any icon I got accident error? This is the summary of errors:

  AppName: explorer.exe AppVer: 6.0.2900.5512

  > ModName: ModVer shellext.dll: 4.0.468.0 Offset: 0000ca 93
  Please help thanks :D

  This problem is likely to make for an extension of the shell badly installed on your machine.  The way to solve this problem is to download and install the free software "ShellExView".  When you run this program, it displays all shell extensions that are installed on your machine with a checkbox next to it.  By unchecking the box, you can disable this particular shell extension.  By trial and error, you can find the one that is causing your problem.  Once you find it, the solution is usually apparent (usually UN-installing and re - install an application associated with this file extension).

  ShellExView: <> http://download.cnet.com/ShellExView/3000-2094_4-145729.html >

  HTH,
  JW

• My iPhone-ish syncs with macbook pro when it comes to iTunes. Message reads "iPhone need latest version of iTunes. I can't understand how to upgrade iTunes on the iPhone, unless it comes to update the operating system. I guess I have the latest OS, 9.3

  My iPhone-ish syncs with macbook pro when it comes to iTunes. Message reads "iPhone need latest version of iTunes. I can't understand how to upgrade iTunes on the iPhone, unless it comes to update the operating system. I guess I have the latest OS, 9.3.2 on my iPhone. Any help for this problem?

  • Sync with iTunes on a Mac or a PC requires:

    • Mac OS X v10.8.5 or later
    • PC: Windows 7 or later
    • iTunes 12.3 or later (free download from www.itunes.com/download)

  iTunes too old and too old osx to support necessary to have iTunes, you will need to update osx to update iTunes to work

• Why don't F'fox can not download last Version saying I need OS5 or 6 &amp; say my Op.System supports not later when I have OSX 10.5.8 and a lot of RAM/HD space?

  As stated above:
  When I launch Ff I get the link to download the latest Version (? 4) I get page say:
  -Unfortunately, the latest version of Firefox is not compatible with the operating system of your computer.
  When I click on "learn more" I get:
  -Mac
  Operating systems

     * Mac OS X 10.5
     * Mac OS X 10.6
  

  Recommended hardware

     * Macintosh computer with an Intel x86 processor
     * 512 MB of RAM
     * 200 MB hard drive space
  

  -J' I OSX10.5.8, I have 1.8 GHz PowerPC G5 processor, 1 GB of RAM DDR SD...
  What happens if you please - HELP?

  You have a PPC processor, not an Intel x 86 processor.

  Firefox 3.6.x is the last available from Mozilla for PPC Macs.
  
  http://www.Mozilla.com/en-us/Firefox/all-older.html

  For older Macs that are not considered supported in versions of Firefox 4 +, try TenFourFox for PowerPC in performance Mac 10.4.11 and 10.5.8.
  
  http://www.floodgap.com/software/tenfourfox/
  
  http://tenfourfox.blogspot.com/
  
  https://code.Google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
  
  http://code.Google.com/p/tenfourfox/wiki/AAATheFAQ