Bad patch after automatic update: Windows will not start

I am running a 32 bit Windows Vista and my automatic updates recently installed "major updates", but there must be one which is mess up my computer. Fortunately, I was able to do a restore of the system on my computer right before when the updates are installed, my computer is working again and the error code that was spotted in the restoration of the system was that there was a bad patch. Updates were: KB2288613 (a security update for microsoft office 2003), KB2347290, KB975558 KB981322 KB2141007 (all updates for windows vista security) and KB905866 (update for windows mail junk e-mail filter).

I was wondering if anyone else has had a problem with these or any other patches automatically downloaded? I restored my computer so that it will continue to work for me, but I can't keep ignoring important updates for my computer. Any suggestions on how to solve this problem and to keep my computer don't step back after an update? Would be trying to download one at a time (then by restarting after each download) in order to remove the update is causing the problem to the best idea at this stage? Maybe that way I can just ignore than AN update...

Hi LinaMarieWSU,

1. what happens after I installed updates?

2. do you have security software installed on the computer?

I suggest that you disable the security software installed on the computer and then install the updates, one after the other and check.

Disable the anti-virus software

http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

 

Updates: frequently asked questions

http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

I hope this helps!

Halima S - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • PC with Windows Vista does not restart after installing updates, "Windows could not start...". "File:\Windows\system\winload.exe status: Oxcoooooof.

    Last night, I installed Windows updates on my HP Pavilion dv6227cl and now Windows will not boot.  I get the message "cannot start Windows.  A recent hardware or software change might be the cause.  File:\Windows\system\winload.exe status: Oxcoooooof Info: the selected entry could not be loaded because the application is missing or damaged.  I DO NOT have the Windows Setup disc.

    Hello

    I suggest you borrow the CD of windows vista to your friends

    Method 1:

    Step 1:

    I suggest you check in safe mode.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Step 2:

    If you be able to start your computer in safe mode, I'd say make clean boot and check.

    Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

    Method 2:

    I also suggest you to see link and check.

    Error: Windows could not start. A recent hardware or software change might have caused the problem after installing Windows updates

    http://support.Microsoft.com/kb/2674065

  • Re: Satellite Pro L300 - update after the BIOS, Windows will not start

    Hello

    I updated the BIOS on my laptop to the latest version and now it does not start in Windows. I can get to the BIOS menu. I tried to restore the default values and saved the day, but he's just a blue screen with writing on whichIi do not have the time to read it before it tries to restart and continues to do the same.

    Any ideas anyone?

    see you soon
    Phil

    Hi chaospunx,

    Which HDD mode did you use before the BIOS update? Perhaps this option, you need to change, then Windows will start up again.

    You can choose between the mode of access AHCI and Compatible HARD disk.
    Check this box!

  • Automatic updates - kb265370 will not be installed because windows encounter an unknown error: 64 c

    Automatic updates - kb265370 will not be installed because windows encounter an unknown error: 64 c

    Have tried several times to install but keeps failing.

    I used a cup-Kiss/fix registry Ccleaner and Norton 360 as well as sort my .net framework client profile 4 back to the original configuration (which sorted prior regarding a contemporary update update problem) and have run two microsoft ' difficulty his '-501223.exe and the other with a long name!

    any help would be appreciated

    Fixed - Sorry for not knowing how to mark the wire/q etc.

    for fellow sufferers, I had to repair/patch/reinstal my .net 1 to 4.

    not really fast, but it worked

  • Why my TestStand deployment installation appear under my Windows will not start menu of my target machine?

    Why my TestStand deployment installation appear under my Windows will not start menu of my target machine?

    I managed to install the deployments of work to the target machines. However, I expected to see the classified facility "My TestStand system" in my Start menu, but it is not. Am I misunderstanding something here?

    Also, if I do another target second deployment to the station as "My TestStand system B", all LabVIEW files in my previous installation for "My system TestStand" disappear from the directory (c:\Program Files\My TestStand system) target.

    I use TestStand Professional 4.2.1 on Windows XP and LabVIEW 2009 development station.

    Thank you Paul,.

    That solved my second problem and inspired me to look deeper for the response to my first problem. The answer lies in the tab 'distributed file","Installer properties' box 'create a program item:

    Wouldn't be nice if it is automatically checked by default for main sequence files? Wouldn't also nice if "Upgrade Code" was regenerated automatically by default whenever we have saved the file *.tsd under another name?

    Thanks again,

    Eugene

  • I accidentally put my system as boot partition and my windows partition not marked as boot! Windows will not start! ):

    Hello

    The other day, I have been stupid, play with my windows partitions, I tried to dual-boot android 4.0 with windows, of course, as a study (this version of android has been mainly Linux). A test installation somehow fault, I put my Starter instead of windows system partition! Now windows will not start, it stays on a black screen with a sign less this sort of thing flashes in the corner.
    So I jumped in my disk windows ultimate 7, and it saysBOOTMGR IS MISSING Ctrl + Alt + Del to restart"" and if I try to install Ubuntu via live disc or USB does not start or the other, it displays the same thing.
    Can you please help me solve this problem!
    Nice day!

    After having the BIOS change, restart you your computer with the repair disc in the drive?  If so, what happened?

  • After the blackout, VMs will not start and Vsphere Client cannot be re management/access / start VMs on a physical server.

    After the blackout, VMs will not start and Vsphere Client cannot be re management/access / start VMs on a physical server.

    Get the error message...

    [[: start: W: 1] 2016-06-09 14:41:36.562 Log for vSphere Client Launcher, pid = 4532, version = version 5.0.0 = build-455964, option = released
    [[:QuickInf:W: 6] 2016-06-09 14:42:20.421 the value of the search dll C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\5.0 path
    [[:QuickInf:W: 6] 2016-06-09 14:42:24.281 load shared dll: C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\5.0
    [[ : start: w: 6] 2016-06-09 14:42:41.406 Log for vSphere Client, pid = 4532, version = version 5.0.0 = build-455964, option = release, user = root, url = https://192.168.10.200/sdk
    [[:ShowExcp:W: 6] 2016-06-09 14:42:42.406 error: an internal error has occurred in the vSphere Client.

    Details: The initializer for type for 'VirtualInfrastructure.Utils.ClientsXml' threw an exception.

    Contact VMware support if necessary.

    System.TypeInitializationException: The initializer for type for 'VirtualInfrastructure.Utils.ClientsXml' threw an exception.

    at VirtualInfrastructure.Utils.ClientsXml.FetchIfClientsXmlExists (String serviceUrl)

    at VirtualInfrastructure.LoginUtils.LoadMatchingVI (String serviceUrl)

    at VirtualInfrastructure.LoginUtils.CreateNewService (String serviceUrl, ClientSpec clientSpec, Boolean waitForTopology, Assembly / viAssembly)

    to VMware.Vim.Client.VimClient.StartUp (2 specMap, String [] arguments dictionary, Manager of LoginEventHandler)

    to VpxClient.UI.InitializeVimClient (dictionary 2 specMap, String [] arguments)

    to VpxClient.UI.StartUpIfNotMultiVcSecure (dictionary 2 specMap, SecureString password, String [] arguments, LoginEventHandler Manager, String, dllPath, list 1 listOfVcUrls)

    System.TypeInitializationException: The type to 'VirtualInfrastructure.Utils.TypedXmlSerializer ' 1' initializer threw an exception.

    to VirtualInfrastructure.Utils.TypedXmlSerializer'1.ctor)

    to VirtualInfrastructure.Utils.ClientsXml... cctor()

    System.IO.IOException: The process cannot access the file "C:\Documents and Settings\XXXXUSERNAMEXXXX\Local Settings\Temp\nyhn4bev.dll" because it is used by another process.

    ...

    to System.Xml.Serialization.XmlSerializer... ctor (Type type)

    to VirtualInfrastructure.Utils.TypedXmlSerializer'1.cctor)

    -End of the exception stack trace internal-

    -End of the exception stack trace internal-

    After many unsuccessful attempts tried to connect Vsphere client, the client has finally connected and was able to on all virtual machines. Thanks to Luciano Patrão for study. For all in the community, peace out...

  • Hello plug-in currently creative cloud and asked me to do an update, it will not start because there is an error code of 2. Comment do?, Hello plug-in currently creative cloud and asked me to make a bet to

    Hello plug-in currently creative cloud and asked me to do an update, it will not start because there is an error code of 2. Comment do?, Hello plug-in currently creative cloud and asked me to do an update, it will not start because there is an error code of 2. make a comment?

    Error code 2: Creative Cloud Desktop app update failed:

    https://helpx.Adobe.com/creative-cloud/KB/Error_Code_2_failed_update.htmload

  • Windows will not start since the update :( Help, please

    Windows could not start. a recent hardware or software change might be the problem

    file\windows\system32\config\system
    status: 0xc00000e9

    When I try to start the system restart that nothing happens

    When I try to restore the computer to factory settings it says that the necessary files are not there.

    My computer was working fine until I installed an automatic update from microsoft. Help, please

    For any problem with the recovery of software/process to factory settings, you will need to contact the manufacturer of your computer.
    This isn't their recovery process, Microsoft.

    Windows Update Forum:

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • Satellite P20-761: Windows will not start - it loads agp.sys then freezes

    When I pass my laptop it starts with the Toshiba logo as if commissioning, but then the screen goes black with the following message:

    We apologize for the inconvenience, but windows did not start successfully. A recent hardware of software change might have caused this... etc etc.

    Then I have a list of options to choose from:

    Safe mode
    Safe mode with networking
    Safe mode with command prompt
    Last good known Configuration
    Start windows normally

    If I have the choice between the options of safe mode the screen goes through a list of files ending with: multi (0) disk (0) partition (1) \WINDOWS\System32\DRIVE.sys, then freezes.

    If I have the choice between the last two options simply, the screen goes black and nothing happens.

    Of I'm desperate is not to lose all the data that I have accumulated on the laptop. Stupid me not a not bother with backups.

    Discs only can I find supplied with the laptop are 'tools and utilities' and 'product recovery dvd - rom '. Seeing that I am not a technical interest, I'm afraid to try just in case I lose all my most important files.

    Help, please! Answers must be plain English as like I said I'm not really technical. Thank you. I cross my fingers.

    Sounds like something wrong with the graphics card or with the graphics driver.

    I think that you have no other choice than to use the Toshiba Recovery CD and attempt to reinstall the OS. I hope that the graphics card doesn t malfunctions.

    It's very sad, because in this case, you will lose the data on the HARD drive.
    Optionally, you can remove the HARD drive and then to connect to little via the USB port on the other computer, then you can make a backup of your data.

  • Pane Windows will not start! Help please!

    I have no idea what exactly happened, but my sidebar will not start. I try to click on it through programs and all he will say is that this windows sidebar has stopped working. a problem caused the blocking of the work programme. Windows will close the program and notify you if a solution is available. I get the same message every time I try to click on run as administrator. I tried so many things, but nothing seems to work. Is it possible that I could reinstall or something? It has been so frustrating. Help!

    Hello

    If you have tried all THE above so it looks like you have a corrupted profile.

    Try these to erase corruption and missing/damaged file system repair or replacement.

    1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    3. then run checkdisk - schedule it to run at the next startup, then apply OK your way out then
    turn it back on.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------

    Then do-, use the hidden administrator account for the lowering your user account (the lowest level)
    APPLY/OK, then go back and reset it to the Admin APPLY/OK - this clearly allows corruption. To do this
    a couple of times. Do the same for other accounts that may be difficult. Then, if necessary, you
    can also reset your password in the accounts. Do not forget to leave your account administrator
    and others to the desired level.

    Make another Admin account with your password and use it to fix the others if necessary.
    (just to fix it with, do not use regular account, a safety valve) Always keep a spare part
    ADMIN account.

    DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

    How to enable or disable the real built-in Administrator account in Vista
    http://www.Vistax64.com/tutorials/67567-administrator-account.html

    You can run the command Admin account hidden from the prompt here if
    necessary.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    If you can't access your old account that you need then you can always use an Admin to migrate
    towards a new (remember to always leave an Admin account that is not used except for a test
    and fix).

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Hope this helps

    Rob - bicycle - Mark Twain said it is good.

  • I have an eMachine EL1200 with Windows XP Home Edition. Windows will not start

    I went to start my computer yesterday morning and Windows wouldn't start up.  He continues to go to a black screen saying that Windows has not started up. It gives me options to try:

    1. safe Mode

    2 safe Mode w / network

    3 safe Mode w / command prompt

    4. last know good configuration

    5 start normally

    I tried all the and none start Windows.  Please let me know how I can fix it.

    Hi DavidMitchell,
    I would first remove all external devices from the computer and try to start again. This means that any player mp3, external drives, USB storage devices, etc.

    If this does not work and you're still stuck on these 5 options you listed above, then it might be time to use the Recovery Console.

    Please see the following thread:

    This is an article on what exactly is the Recovery Console and how to use it properly.

    http://support.Microsoft.com/kb/307654

    I hope this helps. Just reply to the results.

  • Windows will not start because the following file is missing or corrupt < root windows > < hal.dll windows >

    When I turn on my PC a black screen appears for about 5 minutes, then the following message: Windows could not start because the following file is missing or corrupt I can not any more access to the computer and having to turn it off.

    Hello

    I suggest that you follow the steps described in the links below and check if they help to resolve the issue.

    Link 1:

    "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer

    http://support.Microsoft.com/kb/330184

    Link 2:

    IF the steps in the link 1 does not work, check the steps in the link below.

    Error message: "Windows did not start because of a configuration of the disk of the computer problem.

    http://support.Microsoft.com/kb/314477

  • Windows will not start completely freezes...

    Hey!
    I had a problem that my laptop HP 7 windows does not start more... It takes time to get the Palm from windows screen and then it freezes when it gets to the office. Anyone have any idea how to solve this problem? I was thinking about the HP system recovery, but I don't know if that clears all my data or resets just windows. Don't want to lose all my data if its possible somehow. (I have the system on different hard drive recovery not on disks by the way).

    Hello

    Hard disk 1 (303) fast means hard himself is a failure and change Windows is not going to help.  Replacing the hard drive in a laptop is surprisingly easy.  Although the machine in the following link is different from yours, the process is almost identical.

    Replacement hard drive HP

    Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive.

    If you do not have your restore CD, try the link below to see if you can order a replacement.

    http://support.HP.com/us-en/document/c00810334

    A possible way to try to recover your files from a disk non-boot is to follow the process described in the link below.  The CD of the Ubuntu operating system you create can launched from the CD alone (IE it doesn't have to be installed on the hard drive) and I've often found to successfully extract data even a hard failure.  When you created the CD, follow the instructions and see if you can save your existing files.

    http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windo...

    Hope this works for you.

    Best wishes

    DP - K

  • Satellite Pro A300 (PSAG9E) - after updating BIOS Windows will not start

    Restart went well after update BIOS and Windows XP logo appears loads for a few seconds then a beep and restart - last good known or start Windows normally same effect.
    Reboot back to start - this is a new laptop - using the BIOS of Toshiba s official download site.

    Quite annoyed to try to find a way to upgrade or downgrade the BIOS.
    Took battery and RAM to see if I can delete it?

    Any ideas anyone?

    I think you mean BIOS * update * and do not upgrade ;)
    An upgrade is not possible

    However, you can try to remove the battery and the AC adapter and wait an hour. After that, reconnect the battery and the AC adapter and try to start Windows.
    Moreover I would load the default settings in the BIOS before starting Windows.

    If it doesn't work, it seems that your ROM module needs to be reflashed. In this case an ASP can help you.

Maybe you are looking for

  • Pavilion tx1000: Reset bios password

    Comes with system disabled 07926 s/n is CNF7510ZJV. WHAT CAN I DO?

  • MAX

    Hello, I want to simulate sampling using 8051 and max1284. the program has 0 errors, but then / s no signal on pin DOUT of MAX1284. PLEASE HELP ME! Thank you $MOD51; This includes 8051 definitions to the assembler in metalink ; Insert your code here.

  • Is it possible to access wireless and drop files from pc to SanDisk WFD 64 GB with windows Explorer

    Is there a way to connect wireless PC to SanDisk Flash Drive 64 GB with windows Explorer wireless. For example with windows Explorer for \\172.25.62.1\wfd. If I try this I can not drop the files it contains. If I connect wireless PC to the Flash wire

  • sound files

    My new toyota Hilux has a USB connection and when I plugged my Sanza Fuze, he saw it immediately, and it works well with the music, all aspects. He can't see sound files, which seem to me .aa files. Can we do anything? I have one with a straight line

  • Help! Updated, model number now Wireless does not work!

    Help!