Bad video port, can I get an expansion card video or what I need to replace the motherboard?

Similar Questions

• Where can I get a sim card for my mini during my stay in the Canada?

  I have a mini iPad and will need to get a sim card in the Canada to continue to use my iPad while there.  Anyone know where I can buy this sim card and maybe offer a good plan for my 2 months it?  Thank you!

  I got mine from Bell Aliant. You can look at the Web sites for the major Canadian carriers. You should be able to see their plans and maps of coverage. Depending on where you go to the Canada, some carriers may have one better coverage than others. I chose Bell Alliant because were the carrier with the best coverage in the very rural area to which I travel. They also had a location store.

• You will need to replace the motherboard. Can I carry on my copy of windows oem 7

  Recently I'm having problems with my motherboard and need to replace it, but do not know how to send my copy of windows 7 to the new motherboard.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_for_hobbyists.aspx

  What is OEM software? :

  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  I suggest you reduce future losses by investing a full commercial license.

• Licensing issue? I need to replace the default motherboard with a 'Detail' education Vista Ultimate Upgrade on top of XP "OEM." Can legitimately transfer my license everywhere and how?

  I am currently a computer on which I already installed XP OEM and upgraded to the edition upgrade Vista Ultimate retailers through the ultimate steal Microsoft.

  [Reminder]

  The problem I have is that I've recently updated my graphics card to a card of Nvidia 7300GS card Nvidia GT240 on which my motherboard was properly assessed. However, due to some unfortunate circumstances (I dunno if it's associated graphics or an electrical surge problem, I suspect the latter as the card is fine) my PCI Express slot is fried! This resulted in the motherboard being unable to start any card in the PCI Express slot and gives a series of BIOS beep error codes. I even dug my old graphics (7300GS) and he was still unable to boot. Accordingly, I need to replace the motherboard for the PCI Express slot works if I use a graphics card.

  [Problem]

  Since the license Vista Retail Upgrade that I use currently is the edition of 'detail', can I simply change my motherboard everything and turn it back on, or is it more complex because it is installed on the high XP OEM that is bound to the default motherboard? What are my options?

  I have to buy another XP OEM license and reinstall everything from scratch? What happens if I didn't reinstall and just changed the motherboard and drivers updated my current installation? Is - is this legitimate?

  As I understand it, the Windows for OEM license allows a person replace a motherboard of 'default' (GA-M55plus-S3G in my case) for a replacement under certain conditions, mainly as for everything. Am I entitled to it? If so, what motherboard would be I can replace by although it is considered an upgrade? I have in mind an ASUS M4A78L-M as it is cheap and comes with connectors female jack audio 8 channels on the backplate was on my old motherboard.

  My main confusion is to know what license applies to me because of the upgrade process, retail of Vista or XP OEM? Upgrades medium I improve my driver's license?

  I would like to solve this problem without canceling my licenst but just don't know how?

  Thank you very much for any help or advice.

  Zemian.

  It is not Microsoft.

  These are public forums, hosted by Microsoft.

  You need to set the XP Reinstall 1 > and then perform the upgrade to Vista.

  We cannot tell you what motherboard you can replace it with.

  Here is the Vista Forums.

  You will have no problem using the Vista Upgrade retail > solve your XP problem 1 in the Forums of XP:

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• series PCI and ocy port driver easy serial port can not get driver Windows 7 Professional

  series PCI and ocy port driver easy serial port can not get driver Windows 7 Professional

  Hi Louis,.

  What is the brand and model of your computer?

  You can visit the computer manufacturer and try to install the latest version of the Chipset drivers.

  Also try to use Windows Update to update the drivers and check if it helps.

  Automatically get recommended drivers and updates for your hardware

  You can also get in contact with the support of computer manufacturer for assistance.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• How can I get a sim card for iphone is without a carrier in order to use wifi

  How can I get a sim card for iPhone is purchased from an apple store with no carrier, I want to load the applications before signing up with someone. Help

  You can access the App Store via your Wi - Fi connection, so no date cell will be used to download apps.

  The only way to get a SIM card is a carrier.

• Firefox tries to update my version 8.0 to version 9.0.1. I'm not willing to do because the Norton Toolbar is not yet compatible with the new version of Firefox. How can I get firefox to stop trying to update each time I open the application?

  Question
  Firefox tries to update my version 8.0 to version 9.0.1. I'm not willing to do because the Norton Toolbar is not yet compatible with the new version of Firefox. How can I get firefox to stop trying to update each time I open the application?

  Firefox 9 is Compatible with Norton 2011, 2012, 360 v5. See:

  • http://community.Norton.com/T5/Norton-Internet-security-Norton/Firefox-9-support-for-Norton-toolbar/TD-p/615563

• I created a separate administrator account and can't get it to appear at startup.  I need to send my Macbook repair and need this ID to show when they turn on him. How do I do that?

  I created a separate administrator account and can't get it to appear at startup.  I need to send my Macbook repair and need this ID to show when they turn on him. How do I do that?

  If you added via the preferences system/users and groups, it should appear as a long time that you have set the display of connection to appear. To do this, go to System Preferences/security and privacy. Then check the check box turn off automatic connection . This should show the login screen at startup. You may need to click the lock (lower-left) icon to unlock the setting to check it out.

  

• How can I get my mouse to grab things without having to click on the buttons, if I have the touch mouse on my laptop?

  How can I get my mouse to grab things without having to click on the buttons, if I have the touch mouse on my laptop?

  You will need to go to the control panel > hardware and sound > mouse and see if the settings for the mouse pad have a function called "Tap-to-click" or something similar in the description.  The exact name of this feature differs depending on the manufacturer of the software for the mouse.

  If you do not see this option to be available, you will have to probably go to the support site for the manufacturer of your PC and download the latest drivers for your model computer mouse pad and install.  Once installed, go back to the mouse settings in the Control Panel, where you will most likely available additional settings after the driver installed.  I hope that the "Tap-to-click" function will be available to turn on or off.

• How can I get ahold of a LIVE person? I need HELP with my email account (Email removed for privacy), you can contact me at Email removed for privacy or * withdrawn * please someone HELP! Mike Golab

  How can I get ahold of a LIVE person? I need HELP with my email account (* address email is removed from the privacy *) you can contact me to the * address email is removed from the privacy * or * remove * please someone HELP! Mike Golab

  E-mail address is removed from the privacy *.

  No, and that has nothing to do with this old thread. This is a scam that last for years. Microsoft never does unsolicited phone calls.
   
   
   
  Is calling, Microsoft, a scam?
  http://answers.Microsoft.com/en-us/protect/wiki/protect_other-protect_scanning/is-that-call-from-Microsoft-a-scam/6718e389-8a00-4E4B-ACA1-d07298ea4c19
   
  
  Report the scam
  http://support.Microsoft.com/reportascam
   
  
  Scams by e-mail or web: how to protect yourself
  http://www.Microsoft.com/security/online-privacy/phishing-scams.aspx
   
  
  It's a real call from Microsoft?
  http://www.ComputerActive.co.UK/CA/PC-help/2134917/genuine-Microsoft 
   
  
  Avoid scams to phone for tech support
  http://www.Microsoft.com/en-GB/security/online-privacy/avoid-phone-scams.aspx
   
  
  Do not fall for phony phone technical support
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/03/09/Don-t-fall-for-phony-phone-tech-support.aspx
   
  
  Aggressive, persistent Windows tech support fraudsters continue to track consumers
  http://www.Computerworld.com/s/article/9248122/Aggressive_persistent_Windows_tech_support_scammers_continue_to_stalk_consumers
   
  
  What is a certified Microsoft [or] partner?
  http://securitygarden.blogspot.com/2011/09/Microsoft-removes-Gold-Certified.html
   
  
  And see this post by bhringer
  http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_scanning/recieved-eventvwr-cold-call/0f82d183-2046-469F-A2D2-8f9fa291f082#LastReply

• I have a license key for windows 7 Home premium 64-bit. I recently had to replace the motherboard. How can I get a replacement operating system?

  I have a license key for windows 7 home premium 64-bit on a renovated Gateway PC I bought.

  I recently had to replace the motherboard and now have to reinstall the operating system.
  How can I get a replacement operating system? All I see is where I have to pay to download another.
  Thank you

  Download the Windows 7 ISO Image
  Windows 7 Edition Home Premium x 64 (64-bit)

  English: http://msft-dnl.digitalrivercontent.net/msvista/pub/X15-65733/X15-65733.iso

  ImgBurn - supporting the creation of CD more. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn

  Download and install burn ISO Gear (free):
  http://www.GearSoftware.com/gear-ISO-burn.php

  Note: Use always slower burning (4 x or 2 x) speed is offered a choice.

  You may need to reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Im having a problem with your security software.  Your data bass must be bad, now I can't have spent my address question.  Ive answered all questions to the best of my knowledge and software has always said that my answers are incorrect

  Im having a problem with your security software.  Your data bass must be bad, now I can't have spent my address question.  Ive answered all questions to the best of my knowledge and software has always said that my answers are incorrect

  Hello Bernard,.

  You sign a document that has authentication based on knowledge, applied in it? If so, and if you can't go to questions, then you will need to contact the sender of the document because they can remove it and return you the document. You can respond directly to the e-mail received esign and happens directly from the sender.

  Kind regards

  -Usman

• I can't get my link card to work!

  I can't get my link card to work!

  The image is on is surrounded by still images and in < div id = "view" > (see code below). Map links work very well on the images that are in the fixed divs, but not the div. of "display".

  Can anyone help?

  Code:

  <! doctype html >

  < html >

  < head >

  < meta charset = "utf-8" >

  < title > < /title > Mobile phone

  < style type = "text/css" >

  {body

  margin: 0;

  }

  {#wrapper}

  margin: 0 auto;

  Top: 0px

  }

  {#phone}

  Width: 400 PX;

  margin: 0 auto;

  do-size: 0;

  }

  #top {}

  position: fixed;

  }

  #left {}

  float: left;

  padding-top: 268px.

  position: fixed;

  }

  #display {}

  float: left;

  padding-top: 268px.

  padding-left: 28px;

  position:

  }

  #right {}

  float: left;

  padding-top: 268px.

  padding-left: 348px;

  position: fixed;

  }

  {#bottom}

  position: fixed;

  padding-top: 728px;

  }

  < / style >

  < / head >

  < body style = "background-color: #4B4B4B;" padding-top: 0px; ">

  < body >

  < div id = 'wrapper' >

  < div id = 'phone' >

  "< div id ="top"> < img src="Images/top.fw.png "width ="375"height ="268"alt =" "/ > < / div >

  "< div id ="left"> < img src="Images/left.fw.png "width ="28"height ="460"alt =" "/ > < / div >

  "< div id ="View"> < img src =" Images/AlbumPage.png"alt =" "width ="320"height ="2000"well ="#Map2"/ >

  < name of the map "Map2" = >

  < area shape = "rect" coords = "3,437,317,470" href = "Phone2.html" >

  < / map >

  < / div > <!--this is the div that you will use to place your model-->

  "< div id ="right"> < img src="Images/right.fw.png "width ="26"height ="460"alt =" "/ > < / div >

  "< div id ="bottom"> < img src="Images/bottom.fw.png "alt =" "width ="375"height = '1076' well ="#Map"/ >"

  < name of the map 'Map' = >

  < area shape = "rect" coords = "35,3,74,42" href = "goBack ()" >

  < / map >

  < / div >

  < / div >

  < / div >

  < / body >

  < / html >

  I thought about it, I updated the index-z-1 for the right div, this allows the div 'view' on the 'right div", which covered the 'view' div, making it not clickable. Thank you so much... you are awesome!

• I need to replace the keyboard on a laptop Pavilion dv 2610 us. How can I get the old one?

  Have notebook Pavillion dv 2610 us.  You need to replace the old keyboard. How to get out?

  Hello

  "Maintenance and Service Guide" from the following link will show you how:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&LC=en&DLC=en&document=&product=3559261

  Kind regards.

• Can I replace the motherboard on w510 with

  Hello

  Can I replace motherboard 63Y1495 with 63Y1540 or 63Y1542. It is a w510.

  Recantly, I bought an old w510. The portable freezer randomly and never recoveres. It has been repaired for this before and worked fine for a while. There is no problem, but the motherboard video

  What is your advice? Can I replace the motherboard? Is it a long way? Or is it better to find another laptop?

  According to my notes, 63y1545 is a T510 Board with integrated graphics (Intel). The other 2 boards are W510 boards. They are all the same size and shape, but W510 boards have 4 memory slots and use a different cooling fan. The W510 is a nice machine and worth it if you can get a good price on a Board and fan of fixing. Basic coverage is also different machines 'W', but I don't know if it's important or one you have now.