Bad wireless connection with wireless router. UN plug the router and plug it back and connection ok. Do this sometimes 2 or three times. Some time its ok.

Similar Questions

• Why my home wireless to disconnect from the network and disappear shortly after connecting?

  With the help of a new mobile phone Samsung; first day fine, no problems - attached easily and automatically to my home Wifi network (wireless router), several times. 24 hours later, the wifi network keeps becoming extinct, in other words, is not recognized by the card wireless laptop. I said it "disappears" because if I reboot, the wifi network appears as acknowledged, and I can connect briefly - but in a moment, she disappears. I can connect via ethernet to the same wireless router; and the same network wifi is recognized very well by two other laptops in the House.  Curious!

  Hi, Kat,

  Try this - how to repair your Wi - Fi, connection problems.

  http://www.PCMag.com/slideshow/story/262550/how-to-fix-your-wireless-Internet-connection-problems/3

  You can also try to turn the phone off, remove the battery

  Press the power button / stop for 30 seconds

  Put back in the battery

  Power system

  Open - laptop connection shows now?

  Visit the site of the manufacturer for bios updates

• Installed a new wireless router and now the wireless printer does not work

  We installed a new wireless router and now our Dell V305 will communicate or print with our laptops.  Any help apprecaited!

  You re-configured the printer to work with the new router wireless? Boulder computer Maven
  Most Microsoft Valuable Professional

• With GarageBand music itself inside the material and sound materials makes new music

  With GarageBand music itself inside the material and sound materials makes new music

  This kind of music can be put in the game when the background music

  I don't know about this

  Y at - it friends who know say me thank you very much

• I don't know my product key. I don't have a disk it came with the pc and below when I try to read I can not, some numbers are scratched and I just format my pc what can do?

  I don't know my product key. I don't have a disk it came with the pc and below when I try to read I can not, some numbers are scratched and I just format my pc what can do?

  Just installed windows 7 but I can't read my product key?

  Help me please thx!

  Option 1:

  If the COA sticker is damaged, you must use the recovery partition to reinstall Windows 7, it will be exempt from the need to use the product key to activate your installation of Windows 7.

  Option 2:

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling. This will exempt the need to also use the product key.

  Option 3:

  If neither options 1 or 2 is possible, then you will need to invest in a new license of full version of detail.

  Brand

  Online order

  Phone

  Acer

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  1-866-539-3901

  ASUS

  http://eStore.ASUS.com/shop

  1-888-678-3688 or

  1-510-739-3777

  Reference Dell

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/en/backupcd_form?c=us&l=en&s=Gen

  1-800-624-9896

  eMachines

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=eMachines

  1-866-539-3901

  Entry door

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=gateway 1-866-539-3901

  HP/Compaq

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00810334&LC=en&DLC=en&cc=us&OS=4063&product=4057208

  1-800-474-6836

  Lenovo/IBM

  http://www-307.IBM.com/PC/support/site.WSS/MIGR-4M7HWZ.html

  1-800-426-7378

  Sony

  https://servicesales.sel.Sony.com/Ecom/accessories/Web/welcome.jsp

  1-800-488-7669

  Toshiba

  https://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/serviceUnitVerification.jsp?orderType=SFF

  1-800-457-7777

• I favor creative cloud, with photoshop, I have in the office and at work. One home is 16.1.1 and office 16.0.0 version. How can I get the Office to be updated?

  I favor creative cloud, with photoshop, I have in the office and at work. One home is 16.1.1 and office 16.0.0 version. How can I get the Office to be updated?

  Hello

  Greetings!

  As your IT team to do.

  Concerning

  Jitendra

• Ink advantage 2545: changed the name of the wireless router and now ink advantage 2545 does not connect and I'm out of ideas

  I have a Toshiba laptop 64 bit running Windows 10 Home, 8 GB, 1 t hard drive.

  Router is a Samsung phone using Android because it was the only router that I could find which would take the wireless signal.

  I live very pastoral, no neighbours for miles, so I never saw the need for a password on my router.

  Now, some people are installs in less than 400 feet from me, and I think they're piggybacking on my Wifi because my access speed has slowed considerably since they moved in.

  So I decided to change the password of the router, unfortunately, I can not put in any password I want.  It gives me the opportunity to have a predefined password.  So I changed the name of the router I could do without problem.

  My computer very quickly without any problem, however, my printer which worked great for a year with the old router name does not connect on the new name of the router.

  Here is what I tried:

  I had hoped he would ask me for a new name / password, but it did not.

  Then I plugged a cable between the printer and the laptop in the hopes that it would produce a different kind of results.  It has not changed anything.  There is no screen menu on what that be like this on the printer.

  I pressed the wireless button that has the flashing blue light and nothing happened.

  I pressed the button, don't know what it is, but it has a white light, and nothing happened.

  I went on the HP site and followed the instructions but he just said do not connect the cable until told to do so.  So I disconnected everything, lights out and turned back on and still no connection and no invite to plug whatever it is.

  Y at - it everywhere where I have being a novice could get instructions on how to get this working?

  I appreciate any help you can give me.  Thank you.

  Hello

  I think you are talking about SSID. Please, think of it as a new router and use the following ways to correct:

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html
  
  Kind regards.

• Wireless configuration of HP C4780 with new router and Mac (wireless network not found)

  About 10 months ago, I bought a new router. I already had several problems connecting my HP C4780 to my old router, and after setting up the new router, I was totally unable to connect the printer wireless to my router.

  I have reset the system to the printer on my Mac, I have reset the settings on my printer wireless, I downloaded the latest HP software, I've uninstalled and reinstalled the HP software several times and I have had no success. When running through the Setup Wizard, I was able to select the printer and method (wireless network set up by USB) before plugging the USB key. After that, the Setup Wizard says "Device not connected" (DUH!) and the screen select network said simply "no discovery goes Wi - Fi network." I ran the print to the printer from the Network Configuration, and he identified 15 networks (mine included). So, it seems that the Wi - Fi receiver on the printer still works...

  Any suggestions?

  P.S. This printer has been nothing trouble since I got it, and I wouldn't recommend it to ANYONE (I like actually...).

  After attempting to run the installer on my boot camp Windows 7 Ultimate version, I fell at last on an obscure statement in the configuration of the PC software for the c4780. It says to connect the computer to the router using the router WPS button.

  I have reset the configuration on the printer and turned off wireless the wireless, then I pushed the the router WPS button until the blue WiFi light on the c4780 lit. THIS SEEMED to BE THE KEY STEPS to CONNECT THE c4780 to MY ROUTER.

  After that, the configuration and setting up the printer on my Mac using the system of preferences was a piece of cake. Functions of the printer and the scanner work with Mac drivers.

  Problem solved... For now... This printer is so buggy, I have no doubt I'll have similar problems in the future.

• my computer dell laptop was connected to my wireless router, and now the connection is broken ittslef

  I have 2 computers connected to my router wireless #1 is a new satellite Toshiba 2010 and has no problem connecting...

  #2 is a an old dell Latittude D 520...

  It was working fine and connection with a problem and now does not connect to the network...

  I tried the WiFi wireless lan utility Dell and MS WZC... without success...

  The network is no more be authenticated...

  And it does not acquire the network address...

  When I select the icon for network address, which was there before. is now defunct.

  My icon Dell said acquiring and my router icon indicates authentication...

  Then, login unavailable...

  Hello

  ·         You receive an error message or error code?

  ·         What service pack is installed on your computer?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you read the article knowledge base Microsoft and check below.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

   

  Method 2: You can also read the article and check if you can connect to the wireless router.

   

  You cannot connect to a wireless network access point that uses authentication shared from a Windows XP-based computer or a Tablet PC Windows XP Tablet PC 2005 Edition

  http://support.Microsoft.com/kb/884787

  Let us know if that helps.

• I configured the netgear wireless router and works fine but when I turn the computer power off and back on I can't get connection

  Hi can anyone help, I am with AOL, I just switched to the Platinum service, I configured my router netgear DG834G wireless and that's all works fine, but if I turn the computer then turn it back I cannot get a connection and when I ask her to fiind wireless networks the computer tells me that windows does not support my wireless network and I must have another program running , but I didn't so I have to reload the settings again for windows to set it up. What happens whenever I turn off the computer. AOL are without help please someone has any ideas - I use windows xp service pack 3

  Hi Timstimpson,

  It is possible that the Automatic Configuration Windows wireless service is not configured to run at startup.
  Try the following:
  1. click on Start and run
  2. type in the box to run services.msc
  3 scroll down and look for the Automatic Wireless Configuration service
  4. double-click on the service and make sure that the Startup Type is set to Automatic
  
  
  Let me know if it works for you!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What wireless router and the wireless network card can I use with my Satellite 1800?

  TOSHIBA SATELLITE 1800-314
  I NEED TO KNOW WHAT WIRELESS ROUTER SHOULD I BUY AND PC CARD I SHOULD BUY.
  MY CD/DVD ROOM DOES NOT READ DVD. Thank you.

  Router is not relevant at all. You can use what you want. Interesting is what WLAN card on your device is installed.

• New wireless router and the printer does not print

  Old wireless router has failed, installed new network installation one C7280 printer.

  The printing attempt failed. The wireless network Test report indicates all PASS and Excellent, no other nerwork not detected.

  Remove the printer in Control Panel > printers.  Then:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the host name of the printer (found on the network printer configuration report the generated above). Click Next.
  If you get a message about required additional Port information, then the printer is not found using the host name. You can go back and start over or using the IP address of the printer instead of the host name.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Make a choice and click Next.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• I recently added a wireless router and now can't access the internet through Firefox.

  When I laucnch Firefox, I get the following message: Firefox has detected that the server redirects the request for this address in a way that will never end.

   This problem can sometimes be caused by disabling or refusing to accept
     cookies.
  

  What I have to do something else now that I added the wireless router?

  From a previous post:

  Clear Cookies for the specific Site or Page, you encounter the problem of connection to- or if no site is loading, clear all Cookies: http://support.mozilla.com/en-US/kb/Deleting%20cookies?s=clear+cookies & r = 1 & as = s

• Brother MFC-J615W prints & scans through wireless computer, but not the printer itself, error tw006 comes up, how to fix this?

  I tried for several days to get my Brother MFC-J615W do wireless...  I am able to print and scan from the computer but not scan from the device MFC-J615W

  I have:
  Brother MFC-J615W all-in-One
  Windows 7 Home Premium 64-bit
  McAfee Security Center
  Cisco Linksys e2000 router wireless
  I have installed:
  Full driver & software package of brothers website
  ScanSoft Paperport 11SE (scanning software) from the CD provided with the MFC-J615W...
  I tried to scan to Paperport and Control Center 3, but I get the following on my computer when I push the scan button on my printer itself unit...
  Control Center 3-2 errors:
  "Unable to connect to the device.  -If the device is OFF, turn on the device. -Check the I / F cable connection between the device and your computer.  -If the device works on the other post, wait until the task is completed. [TW006]
  "Unable to scan.  Please try to scan the image, once again, if the error occurs again, please reboot your computer and then try to start a new search.  (CC-205-03031f04) "
  PaperPort error: "No Scanner" the default parser is not attached.  Please attach your default scanner or click on the "Select" button to choose another scanner.
  _____________________________
  I can't do anything else in the Control Center 3 but I tried to select the scanner itself in Paperport, which is ' TWAIN: TW - Brother MFC - J615W LAN' a when I hit the scan on the printer, it defines one then the same scan by default to "WIA" error comes again.  Moreover, there is also a ' WIA: Brother MFC - J615W LAN' option in available in Paperport scanners.  The WIA option does not work when I scan in paperport, TWAIN but makes...
  _________________________________________
  I first tried to install the drivers from the CD, but it does work very well so I uninstalled and did a system restore to before that I installed everything...
  Can someone help me?
  Thank you...
  Jesse

  Hello

  1. you receive the error message only when you scan directly from the Brother MFC-J615W printer?

  2. are you able to scan or print from the computer to which the printer is connected?

  If the problem occurs only when you try directly scan at the printer, then I would suggest that you contact the support of brother about the question.

  http://www.brother-USA.com/support/

• My Y510 is unable to connect with WiFi need to reset the modem, and sometimes both

  Hello

  My Y510 sometimes does not connect if my Wi - Fi if one of them started earlier then the other, I went to the media and automatic downloads to make the drivers and software upgrades through its tells me that all devices need update is no update. To connect to wireless internet, I restart my modem, and sometimes both.

  You guys you suggest... Thank you

  Check the site of the manufacturer of the modem for the firmware update if available.

  start-up your computer, press f8 to load in SafeMode (networking) and try again, lets see the problem persists.

  If the problem persists, uninstall the network drivers, restart your computer and install it again.