Balance of Apple - cannot activate the debit card
System performance decreases after a few months of use.
That nothing worked, I had to 'Reset settings' to improve performance.
After that, I tried to add my Apple debit card pay Wallet (one I added when I bought the phone and used very well until the Reset Settings procedure) and the card will not activate.
Even after contacting the Bank and confirming that the card is active and ready to be used with Apple pay, even after deletion and add new card, reset the phone, contacting the Bank and which confirms once again that nothing works, the card is stuck in "Activation" even if up to the reset It worked fine.
I use Apple pay almost everyday, and I miss not having him so... help!
Hello
It may help to follow the following steps on your iPhone:
- Go to: settings > iCloud - at the bottom of the screen, disconnect.
- Go to: settings > Touch ID & password - password turn off.
- Restart your iPhone.
- Reconnect to iCloud, turn on password and try to add your card again.
When adding the card, follow the steps detailed here:
Set up Apple pay on your iPhone, iPad, or Apple Watch - Apple Support
Tags: Apple Pay
Similar Questions
-
Cannot add the debit card to Apple Watch
I discovered lately that my Apple Watch does not have to pay for Apple. I deleted the card from my iPhone 6 and added with no problems, but when I try to add the same card to my Apple Watch, it fails with the error pop up not added card - Contact your issuer of the card for more information. Add card later or try again. I'm with Lloyd's bank, to the United Kingdom and do not understand why it seems to work on the iPhone but not the watch.
Try to set up Apple pay on Apple Watch as described in the article configure Apple pay on your iPad, iPhone, or Apple Watch - Apple Support
-
我不懂为什么不可以麻烦你帮我解决一下
Debit cards are not accepted at all locations.
Payment methods, you can use in the iTunes Store, Mac App Store, App Store and iBooks Store - Apple Support
-
Can I use the debit card for purchases of the appstore?
can I use the debit card for purchases of the appstore?
Is the debit card issued by your bank to access funds in an account of cheques to the Bank? Or did you buy this debit card at a local store? Apple does not accept debit, sold in stores cards. Often a debit card issued by a Bank works very well.
By the end of 2012 mini Mac, OS X El Capitan 10.11.4. Apple Watch, 38 mm silver AL, Watch OS 2.2; iPad 2 Air & iPhone 6 + iOS 9.3
-
Question of ' system cannot activate the graphics performance "T400
Hi all
I have a ThinkPad T400 with Switchable Graphics, running Windows 7 x 64, with the latest drivers provided by Lenovo. I tried to go to the ATI graphics card today for the first time in a little and got a message "system cannot activate the graphics performance", invites me to disable all external video connections or disable all graphics applications.
The problem is, I don't have any open application. I disabled several startup programs, uninstalled VMWare Workstation and tried several services, I thought that might interfere with the manual - still no luck switching. I'll reinstall the driver, but in the meantime, anyone have any ideas, or find a resident program that tempt me not not to be able to switch from Intel for the ATI graphics card?
I believe that after checking the system logs, the error was somewhere in libraries Visual C++ Runtime. I decided at this point, that the question was too difficult to follow and with Service Pack 1 available, I saved and reloaded. Problem solved.
-
Hello
I need to know is below customer vpn will work for windows 2003 64-bit, according to the release notes I doubt it will work.
name of the file - vpnclient-winx64-msi - 5.0.07.0290 - k9.exe
release notes - http://www.cisco.com/en/US/docs/security/vpn_client/cisco_vpn_client/vpn_client5007/release/notes/vpnclient5007.html#wp63537
WILL take the ip address but does not connect. It is possible some configuration or ASA image issue that her first time, we try to use 64-bit OS, for 32 bit OS vpn client works very well.
on the pc screen, it says - reason-442: impossible to activate the virtual card.
Here are the logs of vpn clinet when I tried to connect ASA5520. Version 7.0 (8).
Cisco Systems VPN Client 5.0.07.0290 Version
Copyright (C) 1998-2010 Cisco Systems, Inc.. All rights reserved.
Customer type: Windows, Windows NT
Running: 5.2.3790 Service Pack2
Config files directory: C:\Program Files (x 86) \Cisco Systems\VPN Client\1 15:38:03.921 27/01/11 Sev = Info/4 CM / 0 x 63100002
Start the login process
2 15:38:03.937 27/01/11 Sev = Info/4 CM / 0 x 63100004
Establish a secure connection
3 15:38:03.937 27/01/11 Sev = Info/4 CM / 0 x 63100024
Attempt to connect with the server "203.199.30.190".
4 15:38:04.125 27/01/11 Sev = Info/4 CM/0x6310000E
ITS established Phase 1. 1 crypto IKE Active SA, 0 IKE SA authenticated user in the system
5 15:38:04.140 27/01/11 Sev = Info/4 CM / 0 x 63100015
Launch application xAuth
6 15:38:09.515 27/01/11 Sev = Info/4 CM / 0 x 63100017
xAuth application returned
7 15:38:09.515 27/01/11 Sev = Info/4 CM/0x6310000E
ITS established Phase 1. 1 crypto IKE Active SA, 1 IKE SA authenticated user in the system
8 15:38:10.562 27/01/11 Sev = Info/4 CM / 0 x 63100019
Data in mode Config received
9 15:38:10.781 27/01/11 Sev = WARNING/2 CVPND/0xE340002C
Impossible to activate the 64-bit GOES after timeout
10 15:38:10.781 27/01/11 Sev = WARNING/3 CVPND/0xE3400029
The Client was unable to activate the virtual card on 64-bit Windows
11 15:38:10.781 27/01/11 Sev = WARNING/2 CM/0xE310000A
Impossible to activate the virtual map
12 15:38:10.781 27/01/11 Sev = Info/6 CM/0x6310003A
Cannot restore the file road changes.
13 15:38:10.781 27/01/11 Sev = Info/6 CM / 0 x 63100037
The routing table was returned to the original state before the virtual card
14 15:38:10.859 27/01/11 Sev = Info/4 CM / 0 x 63100035
The virtual adapter has been disabled
15 15:38:10.859 27/01/11 Sev = WARNING/2 IKE/0xE300009B
Has no active IPSec security association: impossible to activate the virtual card (NavigatorQM:936)
16 15:38:10.859 27/01/11 Sev = WARNING/2 IKE/0xE30000A7
SW unexpected error during the processing of negotiator fast Mode:(Navigator:2263)
17 15:38:11.546 27/01/11 Sev = Info/4 CM / 0 x 63100012
ITS phase 1 deleted before first Phase 2 SA is caused by 'unknown '. Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system
18 15:38:11.546 27/01/11 Sev = Info/5 CM / 0 x 63100025
Initializing CVPNDrv
19 15:38:11.578 27/01/11 Sev = Info/6 CM / 0 x 63100046
Set indicator established tunnel to register to 0.
20 15:38:40.953 27/01/11 Sev = Info/4 CM / 0 x 63100002
Start the login process
21 15:38:40.953 27/01/11 Sev = WARNING/2 CVPND/0xA3400019
Fixing error socket:-21. (DRVIFACE:1234)
22 15:38:40.968 27/01/11 Sev = Info/4 CM / 0 x 63100004
Establish a secure connection
23 15:38:40.968 27/01/11 Sev = Info/4 CM / 0 x 63100024
Attempt to connect with the server "203.199.30.190".
24 15:38:41.156 27/01/11 Sev = Info/4 CM/0x6310000E
ITS established Phase 1. 1 crypto IKE Active SA, 0 IKE SA authenticated user in the system
25 15:38:41.171 27/01/11 Sev = Info/4 CM / 0 x 63100015
Launch application xAuth
26 15:39:08.031 27/01/11 Sev = Info/4 CM / 0 x 63100017
xAuth application returned
27 15:39:08.046 27/01/11 Sev = Info/4 CM/0x6310000E
ITS established Phase 1. 1 crypto IKE Active SA, 1 IKE SA authenticated user in the system
28 15:39:09.093 27/01/11 Sev = Info/4 CM / 0 x 63100019
Data in mode Config received
29 15:39:09.312 27/01/11 Sev = WARNING/2 CVPND/0xE340002C
Impossible to disable the AV 64-bit after timeout
30 15:39:09.312 27/01/11 Sev = WARNING/3 CVPND/0xE340002A
The customer does not have to disable the virtual card on 64-bit Windows
31 15:39:19.937 27/01/11 Sev = WARNING/3 CVPND/0xA340000D
The virtual card did not recognize the operating system.
32 15:39:19.937 27/01/11 Sev = WARNING/2 CM/0xE310000A
Impossible to activate the virtual map
33 15:39:19.937 27/01/11 Sev = Info/6 CM/0x6310003A
Cannot restore the file road changes.
34 15:39:19.937 27/01/11 Sev = Info/6 CM / 0 x 63100037
The routing table was returned to the original state before the virtual card
35 15:39:20.109 27/01/11 Sev = WARNING/2 CVPND/0xE340002C
Impossible to disable the AV 64-bit after timeout
36 15:39:20.109 27/01/11 Sev = WARNING/3 CVPND/0xE340002A
The customer does not have to disable the virtual card on 64-bit Windows
37 15:39:20.281 27/01/11 Sev = WARNING/2 CVPND/0xE340002C
Impossible to disable the AV 64-bit after timeout
38 15:39:20.281 27/01/11 Sev = WARNING/3 CVPND/0xE340002A
The customer does not have to disable the virtual card on 64-bit Windows
39 15:39:20.578 27/01/11 Sev = WARNING/2 CVPND/0xE340002C
Impossible to disable the AV 64-bit after timeout
40 15:39:20.578 27/01/11 Sev = WARNING/3 CVPND/0xE340002A
The customer does not have to disable the virtual card on 64-bit Windows
41 15:39:20.953 27/01/11 Sev = WARNING/2 CVPND/0xE340002C
Impossible to disable the AV 64-bit after timeout
42 15:39:20.953 27/01/11 Sev = WARNING/3 CVPND/0xE340002A
The customer does not have to disable the virtual card on 64-bit Windows
43 15:39:21.437 27/01/11 Sev = Info/4 CM / 0 x 63100035
The virtual adapter has been disabled
44 15:39:21.437 27/01/11 Sev = WARNING/2 IKE/0xE300009B
Has no active IPSec security association: impossible to activate the virtual card (NavigatorQM:936)
45 15:39:21.437 27/01/11 Sev = WARNING/2 IKE/0xE30000A7
SW unexpected error during the processing of negotiator fast Mode:(Navigator:2263)
46 15:39:22.046 27/01/11 Sev = Info/4 CM / 0 x 63100012
ITS phase 1 deleted before first Phase 2 SA is caused by 'unknown '. Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system
47 15:39:22.046 01/27/11 Sev = Info/5 CM / 0 x 63100025
Initializing CVPNDrv
48 15:39:22.062 27/01/11 Sev = Info/6 CM / 0 x 63100046
Set indicator established tunnel to register to 0.
Also you need to be in 8.0 code run client Anyconnect.
--
Robet
-
cannot read the sd card. PCI device problem
PCI\VEN_10EC & DEV_5209 & SUBSYS_166E103C & REV_01
PCI\VEN_10EC & DEV_5209 & SUBSYS_166E103C
PCI\VEN_10EC & DEV_5209 & CC_FF0000
PCI\VEN_10EC & DEV_5209 & CC_FF00series of HP pavilion g4 laptop
my laptop cannot read the sd card
Hello
What is the product/model of your computer? G4 something. The second driver on my very first post should work but why?
Now, I need to know the product/model of your computer and its operating system. Please, use the following instructions to find out:
http://support.HP.com/us-en/document/c00033108
Kind regards.
-
cannot activate the automatic updates on my laptop.
original title: cannot activate the automatic updates on my laptop. Were follwoed instructions Update window without success. Help!
Automatic message updates consistent warning box are not on. Tried several times to move away, but still says that the site has encountered a problem. Now completely blocked
Hello
-Did you change on your computer before the show?
-Did you have performed the steps described in this article?
-What Service Pack is installed on your Windows XP computer?
-Have you tried "fix it" of this article?I suggest you to test the issue in a new user account.
-
Hi I want to buy creative cloud membership can I buy through the debit card because at the moment, it shows me the only card of credit (Visa, Master Card) option only?
Payment by credit card is accepted for membership in creative cloud and PayPal is accepted in some countries supported.
Please visit the Creative Cloud FAQ and Adobe stores | FAQ order online and your payment.
-
Satellite L500 - cannot activate the WLAN on FN + F8
Hello to all users of Toshiba, Ii'm new to computers laptop Toshiba, this one beeing my 1st and iIhave a well-known problem, I read on the internet.
I recently bought a Satellite L500-13W. It has Realtek Wifi and comes with Vista OS. I deleted Vista OS since I have the license to the retail of Windows 7 Professional and Windows 7 top intalled. All work well, Audio, video, everything outside the wireless card. I enabled from the BIOS and everything and yet when I press FN + F8 it does not activate. The drivers are properly installed, as Windows 7 brings the upgrade of drivers. He said that the card works fine, but it does not turn on and search for Wifi signals. The Orange of the WIFI led does illuminate not.
If anyone has a solution for this problem, I would be very grateful. I don't know what can be the problem, the software or the hardware.
Advice me please. Thank you.
Hi Darius1990,
> Drivers are properly installed, as Windows 7 brings upgrade drivers
This means that you have installed the Windows update WIFI driver and no official site of Toshiba, right?
Well, in this case, I would try the prétestées WLAN driver from Toshiba. So you can make sure that it s not a WLAN driver related problem. Just check the WLAN from Toshiba Portal:
http://APS2.toshiba-tro.de/WLAN/Have you tested other FN keys combination?
If they don t work too you must install the package of added value and utility to Support Flash Cards because these two tools to control the function FN key and are important to use them correctly.
? -
Cannot activate the 3rd computer with Windows 7 Family pack
I have three computers and all were running licensed copied of Vista. I bought the "Family Pack" upgrade to Windows 7. I have implemented customized installs on all machines - no problem. Activate the first two online perfectly. The third party will not activate so I used the method of the phone. The automated waiting requires the 9 key series of 6 figures and said so I have to answer the questions. The first question is "how many computers have you installed this license on? The answers will take you to a report that says: "we're sorry, but you do not meet the requirements of this license." I am invited to stay online to get help and the system is then said "we cannot help you at this time, please call back."
I tried 12 times over a period of three days - all times of day and night. Same result. I don't know of any way around that. I know that I have 30 days to activate, but I don't want to wait.
Any ideas?
Thank you.
Greg
Try to say 2 when asked how many computers have you installed license on. Maybe it's that this license is not installed until after you enable. Just a thought.
Stu
-
"Cannot activate the recorder. Try to reset the camera. »
Hello, I have recently acquired Adobe CS5 first for my new PC, which is a 64-bit system running on Windows 7 Lenovo. The camera, that I try to import clips is a Panasonic AG-DVX100B, recorded in 24 p advanced footage. When I connect the FireWire devices, I opened the first Pro and set the settings accordingly (which would be settings standard/widescreen 24 p, right?), and in the Capture window, I get the above message, "can not activate the recorder. Try to reset the camera. »
For the life of me, I can't find any settings on the camera that I have to change to make it work. I even captured through Windows Movie Maker/Photo Gallery. No problem, no problem, so it may not be the FireWire card, right? I even changed version of Legacy IEEE 1394 settings and still no luck. On Premiere Pro, I even tried using settings different just to see if 'something' would work. I even followed solutions to this problem on the Adobe site and still can't make it work. Currently, I don't have an internet connection, so I could not update first since I got it a month ago, and I have not all speakers to my PC yet, so there is about his work. I don't think one of these is the cause of the problem?
On another note, I looked around the forums and came across a fellow who has had a similar problem on a PC of Lenova, and it turns out the only solution was to buy another computer together and it has worked for him then. Would be another question, someone else a first Pro CS5 for a Lenovo PC? And it works? Or y at - it some compatibility issue with the two that I should know about? I don't want to pay for another computer or need to switch to Sony Vegas, so if I could get any help on this, would be great.
I'm fairly new to video editing and have not used Premiere Pro or After Effects in the past, so I hope there is something incredibly easy and simple, I forgot.
Thank you.
Well, then after researching further, I discovered that you really need a peripheral audio output so that it works. Plugged in headphones and seizes it like a charm... kind of a weird bug I guess, but I'm just glad it's working now.
-
Apple cannot replace the housing/casing of my iPhone?
I have a 6 s iPhone, and have a mobile phone plan that allows me to level to halfway through my 24-month plan, also for a long time my camera has extremely minimal Exteriors/Interiors damage. And currently I have scratches and bumps on the housing/casing of my phone and I was wondering if Apple can replace the casing/housing and how much it would cost?
Apple does not replace the metal casing of the phone. If the phone is damaged and does not, they will allow to make a release of purchase of the warranty, as damage to the housing would be damage user, not covered by the warranty. However, if the device is functioning correctly, Apple generally will not allow an out of warranty replacement for purely aesthetic problems.
-
Portege R700 - cannot activate the top modem mobile broadband
Hi all!
I have a big problem with my Portege R700 with Broadband Modem built-in.I installed the laptop with the Original CD recovery with Win 7-64 bit - all works well but if I press FN - F8 I only activated wireless and Bluetooth but noch Mobile Internet Modem Mobile Broadband is not displayed in the hardware Manager.
Where the new driver for FN Options?
How is the correct name of this option?I tried to install all the drivers I found here: https://aps.toshiba-tro.de/wlan/?page=3gdownloads
None of them worked! I did a clean install, once again - no modem, indicated in the hardware Manager.
He worked perfectly but after the installation of the new 2 weeks no chance.* Issues: *.
*.) don't see a modem mobile broadband in hardwaremanger *.
*.) FN F8 show no option to activate the modemHelp me please - it is an urgent problem because I need this laptop for businesses. :(
KR
Philipp> do not see the modem mobile broadband in the hardware Manager
The question is: did you buy a Portege R700 with a module 3G?
I m asking because different Portege R700 were released with different specifications.
-
Portege R500 - cannot activate the microphone
Hello
I have a laptop R500 installed with Windows XP and Realtek 5.10.0.5404 driver.
With this driver, I can't activate the microphone so that I can't use Skype.Without this driver, I can turn it back on but my speakers don't turn off when I plug in a headset, so that everyone can listen to my Skype calls.
So I have a problem with and without this driver.
How can I solve this? Is there another driver, I can use?Thanks for any help.
Have you tried to disable the Microphone Noise Cancellation?
Maybe you are looking for
-
How can I get rid of this stop aggravating watching bar when I open Firefox?
No tro need to broaden this issue
-
Why the APPLE TV to stop working 48 hours after installation
-
Convert an image to grayscale in C
Hello. I want to convert an image, acquired by webcam, grayscale in C, using myRIO. I have a webcam connected to myRIO, working on simple image acquisition, but I can't find a way to convert the image to grayscale. I get no error to the building or a
-
Incompatible VISA read starting from 3458
See the attached screenshots. My goal is to capture 4000 datapoints to a ramp of output voltage of 0 to 5v, with 3458A in LEVEL triggered 1v level, starting from the SALT ON signal that allows the output of the unit. I confirmed all signals are OK wi
-
Laptop HP 431 - deleted this partition containing the built-in operating system windows 7
Dear Sir. Manufacturer had given integrated windows 7 operating system that start by pressing F11 at startup. At the time of the installation of external operating system through DVD, I unfortunately, by mistake I have deleted all the partition, I th