Band bandwidth SMU for FPGA chassis

Similar Questions

• NOR-5781 Baseband Transceiver and OR SMU-7962R (FPGA)

  I'm looking for an example of code to transmit videos using OFDM in LabVIEW between two different units of the PXI. I have two different sets of NOR-5781 Baseband Transceiver and NI SMU-7962R (FPGA) installed in two PXIs. One is the sole issuer and another is to be alone receiver.

  Are there examples of code to trasnmit video with the help of these above mentioned devices preferably via OFDM in LabVIEW.

  Thanks in advance.

  Hey Joseph,.

  If you look at the 5781 start-up project, you will see that the analog input and output of the sections of the code are separated.  You will want to remove the section of code of analog output of the side Rx and remove the analog input on the side of Tx section.  At this point, you would have a functional code that would send signals to a chassis to another, you simply add this necessary to the wave before you write it on the device of modulation and demodulation subsequently shape wave after receipt.

  The examples are intended to be a starting point, and I think that you can access your ultimate goal without much change (remove unnecessary parts of the code and the addition of modulation).

• SMU 8262 streaming performance with HDD-8264 on an SMU 1062 q chassis

  Hello

  I have a SMU 1062 q chassis, Win XP, running with a 8262 connected to a HD8264 and two SMU 6537 installed, all three pension being on the express slots (3, 4 and 5). The application of benchmark to test the speed of streaming (Win32FileIO) I get something like 100 Mbit/s with data of pieces about 4 MB and about 140 MB/s with 64 piece Mr. Comment can improve these results to the limit off the coast of 600 MB / s? Y at - it a software/driver tip to apply?

  And, in case, which is the best way to exploit the 8262 written c++ from the code (using the libraries OR)? Is there something similar to the Win32FileIO library? I tried to use the RAID system in program c ++ test, and performance seems very poor, whereas I would need, if not the 600 MB/s rate, at least something around 200 MB/s of diffusion continues.

  Thanks in advance,

  Piero.

  Hi Neil,

  I actually have a 8130 controller, and in fact, this was not the problem: I found the problem was the file interpreted by Windows file system caching. If you use standard fstream calls of C source code you can not get around, but using Windows native call (CreateFile (...), WriteFile (...) API) and definition of the indicator for no data cache or buffering inside the call, I managed to get the full bandwidth of 600 MB/s.

  In any case thanks for the quick response!

  Piero

  I guess you have a controller that only supports PCI Express 1 x.  The SMU-8130 is our highest bandwidth controller, with links to four x 4 goes on the chassis.  In the case of the 1062, each of the locations, 3, 4 and 5 get a dedicated link to the controller.  x 1 links on about 200 MB/s max and x 4 maximum at 800 MB/s.

  So your first step is to use an embedded controller or MXI-Express x 4 instead of x 1 back to a host computer.  The SMU-8130 is the best for data transfers broadband, the SMU-8106 should also suffice your needs.

  If you want data streams on an SMU-6537 drive, it is already integrated into DAQmx.  You simply specify a file name and the data are intended to drive.  If you want to stream * of * disc, you will need to do it yourself.  Here is an example of C/CVI for broadcast disk using a C API scanners and Windows file IO functions.

  Neil

  Senior Engineer

  National Instruments

• HP workspace: what is the minimum bandwidth required for cellular and Wi - Fi connections with HP workspace?

  Hey everybody,

  What is the minimum bandwidth required for cellular and Wi - Fi connections with HP workspace?

  Thank you

  Bill

  Although there is no minimum required to run the HP workspace, a 4 G LTE cell phone or higher data network or connection to Wi - Fi network with a bandwidth of at least 1 megabit per second is recommended.

• How to implement point filters fixed for FPGA

  Hello!

  I am applying the bandpass filter Butterworth for FPGA.

  I managed to develop filters of fixed point that suits my needs, but I don't know how to implement on a table in a project after the FPGA code generation. I tried to understand it in the examples, but I was not very successful.

  My time to finish what runs, any help would be really appreciated...

  Any suggestions?... some examples?

  Thanks in advance

  I've already done that and solved the problem.

  In any case thank you and have a nice day

  Ljubica

• The ballot for 5108 chassis SNMP

  I'm trying to set up statistics SNMP from the ballot for the 5108 chassis with 4 half-width blades. I can get SNMP data of the tissue Expander 6120 just fine such as IFs and such, but I do not see any OID corresponding to the frame.

  Is there a separate host that I should talk to the chassis, or maybe a different community name?

  I seeks to monitor the current consumption of the chassis UPE four, as well as two blocks of FE.

  [email protected] / * /-Lun: ~ # snmpwalk - v 2 c - c ucs1 public.1.3.6.1.4.1.9.9.117.1.1.1
  SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.1.470 = INTEGER : 2
  SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.1.471 = INTEGER : 2
  SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.2.470 = STRING : « CentiAmps @ 12V »
  SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.2.471 = STRING : « CentiAmps @ 12V »
  SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.3.470 = INTEGER : 4538
  SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.3.471 = INTEGER : 4538
  SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.4.470 = INTEGER : 29
  SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.4.471 = INTEGER : 29

  Here's all I could get out to the FE PSU, and the value of 4538 seems to have no correlation with what is displayed in the Manager of the UCS in the statistics section.

  Thank you!

  There is no statistics for the chassis.

  You can only snmpget stats for the 'NXOS' of the interconnection of fabric part.

  You can get for all of the UCS snmptraps (go a google for UCS - MIB and there's a doc explaining this on cisco.com - do a google for site: cisco.com ucs documentation roadmap).

  At the end of the year I think that a complete MIB will be available to do what you want.

  If you want statistics, use the XMLAPI.

  See you soon

  Steve

• SMU 7857R FPGA and DAQ task

  I'm looking at the SMU 7857R.  I would use the 8 analog inputs and the FPGA to do some annalysisy and DIO based on the best data.  I was wondering if it is possible to also define a DAQ task so that all analog data will be made available to the host.  Using a data acquisition task would be easier for me to have to write code fpga for use a DMA fifo to send back data.

  Hi bcat!

  A data acquisition task is only for devices Data Acquisition product supported by driver DAQmx as X-, M-, S-, maps E-Series. The boards of the R series are only supported by the driver OR RIO.
  If you don't need pre-treatment on the FPGA so that you can distribute simple data through DMA on your host. If you are looking for an API for the comparable FPGA with the DAQmx API then please check the NI CompactRIO waveform reference library. You can also use the library for R Series boards.

• Limited to 127 for FPGA PID gain

  Hello

  I have tow questionq the first technical is the second commercial is.

  1 * for an FPGA with PXI8108 and PXI-7841R application I want to insert a value of "2100" so greater than 127, but module of pid gain is limited to 127.

  How can I do. Thanks for your help :/

  2 * I want to buy another product like target FPGA PXI-8108 for other applications, but I need PXI7841R with LABVIEW FPGA and RT I only move forward without other complementary modules to insert. Is the chassis necessary?

  I can't find other versions like PXI7841R do the same job with the same performance with PC but cheaper (no chassis & PXI-8108)? i ' am, search the Web, OR, but I have not found so can you offer me any product desired OR

  Thanks for all your response.

  Riadh WILSON.

  (2) the chassis has the RT controller. You can get cards to USB (no RT) R series FPGA / PCI / PCI-Express that plug into an ordinary PC. You can install LabVIEW Real-time on a PC, but it requires some hardware configurations so that it can be supported. Have you considered a device of RIO as a CompactRIO / sbRIO? These are materials NI Compact integrated a RT and FPGA which are cheaper than the PXI controller.

• can not get the bandwidth used for Wildblue but can be downloaded on IE

  We have a counter for the use of the Service by Wildblue Satellite bandwidth. 2 days ago it stop working. If I change from Firefox to IE, it works. Any ideas?

  What I found after much research... In many changes of Wildblue efforts recently, they inadvertently locked all my permissions in the login to the account management screen and therefore has no access to my use. Thanks for your help. Problem solved!

• Satellite M30-704: band bandwidth hoggin?

  Hi This is my first post so go easy on me.

  I have a satellite m30 704 currently under xp sp2 and my problem is that I share a wireless network with two other computers, another laptop manufacturing running xp sp2 & a mac from apple OSX.

  The router is a netgear DG834GT.

  They are all connected via wifi & it seems to be my laptop creating the problem monopolizing the bandwidth?

  If I'm on the net at the same time as other portable computer manufacture it is not a problem at all, but if I'm on the net at the same time as the imac it takes literally 5 minutes to load a page on the imac.

  It happens also that as soon as I pass on the other computer laptop manufacturing & I am connected regardless of the fact that I'm not really surf the net?

  But if the XP laptop & the imac are both online at the same time there is no problem at all.

  I'm completely baffed to that I have absolutely no idea why this is happening, I even contacted netgear & they suggested upgrading the firware & reconfigure the router, done cela & still no luck so please can someone help me before I'm left with no option but also to buy a new laptop like the imac user is my brother who is a freelance graphic designer so that it uses his imac for work, hes, threatening to disconnect me!

  Thank you

  Hello

  A question: why you have connected two units machine to Windows XP and MAC to the internet if you only work with one at the same time?
  Disable the connection on Windows XP computer laptop for work with MAC and everything will be ok ;)

  I don't know why the Internet is slowly on other units while the Satellite M30 704 was connected to the WLan router. Maybe a part 3 application is running in the background and the bandwidth with both hands

  What card WiFi has been installed on the M30?
  It supports a 802.11 B or 802. 11A / B WLan standards?
  Maybe the map of the M30 WiFi signal has a bad influence on the correctly WLan signal received on the iMAC that knows

• Satellite A210-16F - part number for the chassis need HARD drive

  Hello

  does anyone know what what is the * part number of hard drive for toshiba satellite A210-F16 chassis *.

  The model number is * PSAELE-01S009G3 *.
  I had a frame of HARD drive with a V00927210 part number that does not match this pattern.
  If anyone knows of a reference number or if it can display an image, at least, I would be very gratefull!

  Thank you!

  Hello

  I put t know what HARD drive chassis you re meaning precisely because the HARD drive in my A210 notebook can not find in any media
  It s just connected to the connectors in the HARD drive Bay.

  Anyway, if you need a few laptop parts (not looking at this as part it is) then I recommend you contact the ASP (certified partner) in your country in order to get a part for the Satellite A210 laptop model.

  See you soon

• can I purchase an additional band of Hermes for my Hermes watch?

  I am owner of a wild animal Barenia Hermes Apple Watch 42.

  I would like to know if it is possible for owners of existing Hermes watches buy an additional band, as black, so you can use it in different events?

  I know they don't sell them like that because of the limited supply that Hermes produces and also the concerns of people buy the one extra and re - sale, but for a guy like me, who has already put the $ in a Hermes watch this will definitely be a plus.

  Not that I can find anywhere.

• How to read the status of User1 DIP-switch with a cRIO FPGA chassis?

  How to read the State of the DIP switches on a FPGA cRio chassis?

  I work with a cRIO 9022... My idea is to put the system in "service" mode with USER1 switch to IT and communicate with the FPGA via the FPGA - GUI (VI) on the host computer instead via the RT module that is used in normal conditions.

  Any ideas? Unfortunately, I don't have an unused channel on the left... .and (as I know) cannot use the interface RS232 of FPGA.

  Many thanks in advance,

  Luke

  Hi, this is the correct information. You cannot read the FPGA of DIP-switch status. The only thing you could do is to use the function of Reading Switch.vi located under the range of functions-> real-> utilities RT time

  It's how you probably know side host RT and not the FPGA.

  Cordially Virginia

• M6-n010DX: Dual Band Wireless card for AMD based m6-n010DX

  Recently bought a router ASUS RT-N56U dual band.  Works very well and offers 2 powered by USB port for network implementation 'server' hard drives.  Problem is that my laptop has only a single band wireless card.  Checked the "Maintenance and Service Guide" for the m6-n010DX and the ' Intel Dual Band Wireless-AC 7260 802.11 2 × 2 WiFi + BT 4.0 ac adapter Combo "is listed (page 4).   Thought it strange that an Intel card scored for a portable base processor AMD, but I decided to give it a try.   IT DID NOT WORK!   Does anyone know a card dual band wireless that works?

  Thanks for your help,

  Here's what he said.

  Integrated wireless options integrated wireless LAN (WLAN) through two WLAN module wireless antennas to appear together Support for the following WLAN modules:

  ● Qualcomm Atheros AR9565 802.11b/g/n 1 × 1 WiFi + Bluetooth™ 4.0 Combo Adapter - 733476-001
  ● RT3290LE Ralink 802.11b/g/n WiFi and Bluetooth 4.0 Combo Adapter 1 × 1 - may be iNtel CPU but no P/N?

  Doesn't look like there is a dual-band for her Bard?

• 5154 digitizer for fpga data

  I am trying to stream as quickly as possible from the to a FlexRIO 7966 5154 digitizer.  From the example "NISCOPE fetch Forever" in LV2012, I can implement the acquisition on 5154 @ 40MS/s, 50 k of data I8 piece and the graphical indicator seems to keep well indefinitely.

  I tried then write data to an FPGA - FIFO target host, and it chokes.  With FIFO write the method inside the loop of 5154 fetch the 5154 ends in error because of the "overwhelming memory" (it fills its on-board memory until the HOST is reading).   With FIFO writing in a parallel consumer (queue conduit) loop, the queue overflows just because he can't write that as fast as the 5154 FIFO provides samples in the queue.   What Miss me?  The 5154 uses a PCI DMA bus (I think), so I think that if he could hold, the host to the FPGA PCIe bus must be capable.

  There is another factor, that I have not taken into account?   Sorry I can't provide the VI since the installation of the LV is on a PC not connected to the network.  Any advice or suggestions would be appreciated.

  Thank you

  Mark Taylor

  For future reference, I ended up resolving this by moving the implementation on the actual FPGA.   I had run in mode "on the development computer with i/o simulated" and no matter what I did with the start-up or sizing FIFO sequence, it just doesn't work.

  After compiling and running on the FPGA, all right.  Maybe it's the basic knowledge, in fact I remember somewhere in my travels reading that don't accurately represent timing problems when running to the old fashion, but LV FPGA has kind of us painted into a corner with the compromise of simulation/compilation.  They do not include Modelsim, which is the only tool that enables co-simulation do functional and verification of the timing set (we Questa, unfortunately) and independent VHDL simulation captures the interaction host with precision (and software processing/timing is impossible to quantify!).  In my situation, the only way to operate at speed is in the FPGA, but then I can't see all of the things that I need to see to debug... ARGH!

  Additional links and resources always will welcome (on debugging of FPGA LV and design in general).  I found a couple of things below, which was somewhat useful:

  "NEITHER powerful LabVIEW FPGA Developer's Guide"

  http://www.NI.com/Tutorial/14600/en/

  I found a link to an "FPGA Debug Reference Library": http://www.ni.com/example/31067/en/, but my installation does not seem to have this available.

  And it looks like 2013 may add functionality to help alleviate some of this via the node of the execution of office referred here to the 'Test and debug LabVIEW FPGA Code'

  http://www.NI.com/Tutorial/51862/en/