banging sounds

Similar Questions

• Want to 750 - xt 550 (CTO): Desktop problems Bang and Olufsen Sound of 750 - xt HP Envy with the brand-new office

  I bought a new system and it arrived yesterday, in the introduction, I have a 5.1 speakers Creative Labs system (which worked perfectly in my previous HP media center PC) I'm connected (using the catch green, black and Orange on the back of the system).  Using the Bang and Olufsen 'test' feature, I hear from "front speakers' (green connector), the Center and the subwoofer (Orange wire) no sound from the surround speakers (black wire).  The sound is HORRIBLE, roaring, low volume, just horrible.

  If I pass the black cable (surround) at the entrance to white (side speakers) I can hear the sound on the 5 speakers, it's always horrible and very, very disappointing!  I spent over 4 hours on the phone last night with HP Support who told me, in conclusion, that my system does not support sound 5.1, I will be able to use Stero (i.e., the Green connector).  My number is 3023344605, the discussion was just a mess.

  Can somone suggest please how can I get my sound working properly?

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.
  If you are unfamiliar with works as a private of the Forum messages, this post has instructions.

• Sound of the big bang came through my speakers this AM I clicked on Firefox? Why?

  I run my modem wireless computer 24/7. When I clicked on Firefox this AM the sound of a large explosion came through my speakers. Why? I've been hacked? can you check my computer with file sharing?

  You may eventually receive some comments through your speakers (static or something else). We cannot check your computer, but I'd say you have some sort of back in your speakers, the pirates do not your speakers go boom.

• Re: Bang & Olufsen sound is very small and her awlful...

  Problem similar here on HP returned the group as audio failure diagnosis was the result unit reurned and tested on after 20 minutes BBC radio same terrible first problem noise not his systeyem B & O rubish visited their site and then they recognize not even who sound software certainly no downloads or dll. Must say their interface when he worked looked as if it was made by a novice.  Absolute con wish I never bought Toshiba will 6 years never a problem now it and now the Ethernet didn't! 1

  Hello

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

  Thank you.

• creaky opening and the sound door banging

  How do I turn off the sound of the door opening and the door slams sound?

  When you hear these noises?

  In general, go to control panel > sounds and Audio devices, and click on the "Sounds" tab  On the background, part of the tab is a box under the heading "program events".  Scroll through this list.  Every event that has an icon of the left speaker has a partner.  When you select an event by clicking on it with your mouse, the audio file appears in the box under the heading 'sounds '.  To preview a sound, click the play right out of the box 'Sounds '.

  If you find events that produce the sounds of the door you can change the sounds associated with these events by using the drop-down list or the Browse button.  If you don't want any sound, use the [None] entry at the top of the drop-down list.

  If you make changes, OK your way out.  Otherwise, close the dialog box by clicking the Cancel button.

• 5102na HP OMEN: how to disable the audio correction Bang & Olufsen horrible?

  Is there someone who could tell me please how to disable the audio correction Bang & Olufsen? I'm sure that some people like it but I work with audio and I can't really how it changes the sound. I tried to open the Bang & Olufsen sign but I cannot unselect the correction in the section "listening experience", nor that I can change the associated equalization. Please someone help, thanks!

  I found a solution: http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/Beats-Audio-compression-and-volume-fluctuation-HP-ENVY-m6/m-p/5137867/highlight/true#M67144

  1. Go to the Windows Device Manager > sound, video and game controllers section.
  2. In the list of the audio device drivers, look for Realtek High Definition Audio. This is the device driver for BeatsAudio (a bit sneaky, wouldn't you say?).
  3. Right-click and select disable. Down arrow on this driver, indicating it is disabled. (NOTE: at this point, you will not be able to play music files.)
  4. Right click and select Update driver software.
  5. Select Browse my computer for driver software.
  6. Select Let me pick from a list of drivers for devices on my computer.
  7. You should see a window that says Select the driver to install for this hardware device. NOTE: If you see a window that says something like This is the best driver for this device, close the window and repeat steps 4, 5 and 6.
  8. In the scheme box, select Audio device high definition (this is the device driver audio substitute) and click Next.
  9. In the Update driver warning window, click Yes. You should see a confirmation with the high definition Audio Device display window. Click on Close.
  10. In the list of drivers of audio device in the section audio, video and game controllers, you will notice that the high definition Audio device now displays instead ofHigh Definition Audio Realtek.
  11. When prompted to restart, click Yes.
  12. Now enjoy your music with no compression!

  Thanks to SteveCT99

  This does not disable audio-Bang & Olufsen, but I just installed this EQ across the system instead: http://sourceforge.net/projects/equalizerapo/

  HP needs to release a driver which allow us access to the "Improvements" tab so we can turn off "Loudness equalization" (although "Loudness equalization" should not be on by default in the first place).

  The current driver is default.

• HP ENVY notebook - 15 t-q400: cannot enable the feature Bang & Olufsen

  I have ENVY of HP for laptop - 15 t - q400 CTO (ENERGY STAR) with the custom configuration.

  After updating my drivers at the last edition, I can not activate bang & olufsen. In the Advanced tab of listening, I can't literally click the box to activate it. Was wondering if anyone knew a way around it.

  

  Hello

  Try the following.

  Download Realtek HD Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72484.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp73501-74000/sp73512.exe

  When the reinstallation of Chipset is finished, stop the laptop.

  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• Equalizer-indicator of the WAV sound file

  Hi all!

  I have a newbie question I am stuck on a stage in the design of an equalizer sound wav.

  The point of my Equalizer must indicate the magnitude of the different frequency ranges, in the form of an equalizer while that listen to you. The wav file playback sound and this is an indication of the greatness (EQs) must be sinhronised. for example: If you hear a bang you also see on the indicators at the same time.

  I can't understand how to set up a loop that would do this.

  Now, I get only first set scale.

  Thanks for the help.

  You must use pieces of the wav file in order to do what you want. Go to help on the toolbar. Select search examples. Search for sound. Then look for the 'file to his \Sound Output.vi' this will give you an idea on how to do things. Be sure to save the example in your personnel file before you do any work on it.

• Sounds and Wi - Fi are unusable after the awakening of Windows XP SP3 of stand-by

  original title: XP SP3 cannot wake up from standby correctly

  I recently upgraded my system from Windows XP SP2 to SP3 and installed onenote 2010 professional office 2010 but still not active. I found if I maintain my system, and cannot be used as alarm clock, sound and wireless.

  When I click the speaker button, I can hear the sound of 'Bang', which implies a mistake, and a pop-up box displays saying that «...» No audio mixer table cannot be found... ». I can't play music or watch the video.

  When I find out wireless available in the range, he said: "another program manages wireless" these words. But I have installed no utility to manage my wireless.

  There could be another problem. So far, I find just above two.

  After the system restarts, everything is recovered, until next time, I stand by my system.

  Hi Edwin.Xi,

  Given that you have upgraded your system from Windows XP SP2 to SP3, you may need to consult the manufacturer's Web site and download and install the latest version for Wi - Fi and sound drivers and check if that helps:

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  You can view the following articles in the KB for more information:

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Sound has stopped working, except with Skype

  Hi all.

  Suddenly, my sound from the internet (YouTube, etc.) and Windows Media Player doesn't work. All diagnoses show that everything is fine. The only time where the sound work is when someone calls me or I call someone on Skype, but only after I take the call or the other party doesn't - I hear the rings on incoming or outgoing calls.

  Any help would be greatly appreciated.

  Thank you.

  Igor

  Hello

  1 did you software/hardware changes to your computer before this problem?
  2. what exactly happens when you try to play a media file on windows media player? It display any error message or just play the multimedia file without sound?

  Try these steps, one by one, and look for the question.

  Step 1: Since the question has recently started I suggest you to perform system restore on your computer.
  Reference: http://windows.microsoft.com/en-US/windows-vista/What-is-System-Restore

  Step 2: If you are still having the same problem then, check if the problem persists in the clean boot state.

  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  Try the procedure described in step 1 in the section below to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

  Step 3: Also, look for the Red or yellow bangs in Device Manager and send back the same.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Microphone sounds like a Robot.

  My microphone works perfectly until today.

  Randomly, he decided to sound like a robot when I talk and I hear a hum / buzz. So I uninstalled the driver (Realtek hd audio) and it re-installed. Now, when I speak, it starts with a bang then goes quiet and I sound like a robot.

  I tried several to fix but nothing worked even more messages from Microsoft such as this will not help.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/my-internal-microphone-makes-me-sound-like-a-robot/0ffbe04d-277F-E011-9b4b-68b599b31bf5?auth=1

  Help, please

  -A7

  It is likely that the MIC himself material is a failure.

• "Device Failed to Connect" sound notification with no popup at startup once the desktop appears

  When the desktop appears, I sound "dududu" with no popup. I had to look it up in the audio file and the explanation next to it said noise "device failed to connect.

  I currently have no device attached except speakers and keyboard and mouse. I bought a HP Phopsmart printer and installed but it does not work well, so I uninstalled it. I left the USB cable connected to the computer after disconnecting the printer after reboot several times, and then disconnected. At this time the sound notification has begun.

  I don't know if the printer had nothing to do with it. What should I do to fix this? Help, please. Thank you.

  Hello

  Have you tried to remove your printer as described in the article?

  If no, then try and see if the problem still occurs.

  Also check if the answer given by SpewHole (published on Thursday, April 1, 2010 04:51) helps you in the thread/link below.

  http://social.answers.Microsoft.com/forums/en/vistahardware/thread/c5737e52-b7a7-4c68-B27B-89adb8343716

  Check back for red or yellow bangs in Device Manager and post status.

  Steps to open Device Manager:

  1. click the Start button, type devmgmt.msc and press ENTER.

  You can also check if the problem persists in safe mode and post back with the State, so that we can help you better.

  To use the safe mode option, follow these steps:

  1. reboot your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
  2. use the arrows to choose appears in the Advanced Options in Windows Safe Mode menu and press ENTER.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-safe-mode

  Kind regards

  Umesh P - Microsoft Support

• After my wife 5 iphone update ios 10.0.2, ringtone sounds is more when a call comes in.  What should I do?

  After the update my wife 5 iPhone and my iPhone 6 ios 10.0.2, we met problems.  His phone will not ring when a call comes in, and my phone does not sound an alert when a message arrives.

  Hi MikeDallos,

  I understand that after your wife 5 iPhone update and your iPhone 6 the new iOS, you both know questions in regards the phone doesn't ring do not or may not alert you to the alert notifications when you receive a message. I use my iPhone all the time and I count on the possibility of having my phone alert me for incoming calls and messages. We'll see what we can do.

  The first thing I want you to do is to restart the two iPhones. Make sure that your wife's iPhone has the ring/silent switch on mute.

  Restart your iPhone, iPad or iPod touch

  Here is an article that goes on measures to be taken for this issue:

  If you hear no sound or distorted sound from your iPhone, iPad or iPod touch speaker

  For your iPhone you did not give a warning sound with message notifications, you'll also want to review this article as well:

  Use the Notifications on your iPhone, iPad and iPod touch

  Please tender back if you still have problems.

  Have a great day.

• How to change the iPhone camera shutter sound 7

  How to change the iPhone camera shutter sound 7?

  Hello

  To adjust the volume of the sound of the camera shutter:

  • Use the settings ringer and alerts:
    • On iPhone 7 and iPhone 7 more, go to: settings > sounds and haptic.
    • (Other models, go to settings > sounds).
  • Or turn mute off / on using the switch on the side of your iPhone's ring/silent.
    • (The mute function is disabled in some countries).

• Music app will make no sound

  The music on my iPhone app 6 will not make any noise. When I insert a track, it is said that he plays, but no sound. Happens if I play with nothing hooked up, or if I have a headset in, or if it is connected via the speaker or car charger. The phone always say he plays I like, but no sound comes out. This does NOT happen if I use an app like Spotify, so I know that my speakers and other audio devices are not the problem. It's incredibly frustrating. What exactly should I do to get it working again?

  Hi there 1glazeddonut,

  I understand that you encounter some problems with your application of music playing songs you want to listen to. I can help you solve this problem. First, lets start by closing the music app and restart the iPhone:

  Force an application to close on your iPhone, iPad or iPod touch - Apple Support

  Restart your iPhone, iPad or iPod touch - Apple Support

  Let us know how the behavior changes after you complete these steps. Thank you for coming to Apple Support communities.

  See you soon.