Base material Labivew

Similar Questions

• DAQmx Base material design

  Is it possible to design the DAQmx compatible daq system according to the requirment of our project?

  If Yes please suggest document referance

  I think that you can talk to develop your own hardware that can be used by DAQmx and LabVIEW?  The DAQmx part I'm not sure, but I found this resource which seems to be a development kit to design your own module compatible cRIO: http://www.ni.com/white-paper/8663/en/

  Personally, I've never needed to do such a thing, then maybe someone else with more information to ring.

• Detection of peak

  Hello

  I'm doing a heart rate using LabVIEW and arduino monitor. The base material using a LED and a photoelectric cell. You place your finger on the LED, with the photoelectric cell above, and the cell detects changes in the amount of light in your finger whenever your heart beats.

  My design works very well and is able to detect changes in light. However, I can't calculate these changes and convert the data to a heart rate. One of the problems is the detection of crete, in which you set a threshold value and the detector seeks amplitudes above or below this value. The problem is the amount of light which crosses his finger varies greatly, so even if a pulse is clearly observable, you cannot set a value for the threshold to seek.

  I tried to solve this problem by making the threshold vary, whereas it would be slightly lower than the average, but my code still fails to detect a pulse. Does anyone have an idea how I could solve this problem, or if there is a better method than using the default tip detect?

  I have attached a copy of my code and would be very grateful if someone could help. Thank you very much!

  
  

• On the Volume/Treble & Bass error display screen

  Model: DV8t 1200

  Product #: WF681AV

  Window 7 64 bit

  First of all, let me explain my problem. The volume of the screen and triple & low display is not showing / work. The volume real/treble & base material touch buttons functions correctly. To clarify what is the display, I found a picture online to make sure that we are on the same page.

  (Ignore the Green volume bar. Apparently, the guy who posted this image was trying to get rid of it and thought that it was due to a keyboard software)

  

  The block appears quite acute & low while poster all messed up. It would have blue and white lines where the blue solid is suppose to show.

  Let me return path. This problem occurs after I install a new copy of Windows 7 Ultimate. After you have installed Windows 7 Ultimate, I'd install the latest drivers directly from HP using the link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=4186...

  When he was just a Home Premium to HP, it displays and works correctly.

  So, like many others guess that there must be something wrong with the installation of drivers or operating system. I used two different copies of Windows 7 Ultimate, which would exclude more unlikely that it will be the fault of the OS. Using two different OS, I installed the drivers several times by ensuring that they were not corrupt. I reformatted the laptop several times (about 5 or 6) before sending it. All HP made was to reformat my laptop to the standard family Premium. After that I got my laptop back, the display of volume/treble & bass would work. After installing Window 7 Ultimate, it still would not work.

  I'm at an impasse as to what I should do. I have some other ideas on how I can fix this.

  This is to get your order volume and eject to work.

  Download this file to the desktop, install and reboot. Who should get your eject to work, but no volume no OSD.

  FTP://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46762.exe

  Install this version on top of the one that you just installed. (Download this a second on the desktop as well)

  FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45140.exe

  Now that you have in "Programs and features" uninstall and then reinstall 45140, the other still and will give you the volume OSD and your eject button.  Restart your machine.

  Note: You must have at least one Media Smart program installed. I chose DVD Smart Media and Media Smart Web Cam.

• Win 7 x 64: No. WWAN after the resumption of the mode standby and Bluetooth turned off

  Hey guys,.

  I had this problem for a few weeks 1-2, after the exit of the mode ensures my WWAN - the Sony Ericsson 3507g - modem is invisible and my Bluetooth is disabled.

  WWAN: the light is off, there is no switch on the screen Fn + F5 and power off/on with the hardware switch does nothing either, after a reboot, that everything is back to normal again until you go back to sleep. A few days ago he suddenly perfectly well but when I had to restart, the problem is back.

  Bluetooth: the adapter is always disabled after sleep and sometimes after a reboot, I can not find a model to know when this happens exactly... but I have since my WWAN modem is upward I can't help but wonder if it has the same cause...

  I already did a complete new installation of Windows 7 Home Premium x 64 today and I'm under the latest Vista drivers, because those who do not work with the Ericsson Wireless Manager Windows 7, they ran flawlessly for a few weeks, so that they should not be the problem...

  BOT of the above issues is dealbreakers for me because I'm using WWAN all the time and I use a Bluetooth mouse... then... Please help me ;-)

  Thank you in advance,

  Stefan

  I think I found the culprit: the last time I had this problem I didn't know what was the reason.

  After that the above post I got it works fine until recently it suddenly reappeared without having done me anything (Finally, I've done something, but I couldn't understand that).

  I installed a few games, but nothing about the wwan adapter.

  I also had the same problem to launch a vanilla Ubuntu 9.10 x 64.

  Finally it dawned on me that, just as the problem the first time, I had also installed Ubuntu. I think that something about the way that Ubuntu handles the umts modem makes it behave this way.

  This time (since I seen Ubuntu as the reason yet and I couldn't understand anything more), I opened the Thinkpad and looked for clues as to why this was happening - loose cables and all that - but nothing was wrong. I also disconnected the small backup battery for a few minutes to reset all the BIOS (except the part that is not volatile of course) - who probably had the same effect as turn off/turn on the modem I/O on-screen that solved the problem last time.

  Then, I rebooted, entered the BIOS, responsible for the default installation with F9 and it suited my needs. Since then he has worked flawlessly again...

  I'm not sure that Ubuntu bad, but it's the only logical explanation, and I think that's the reason why some mistreatment of the modem which required a "reset" on the base material, it is why a complete reinstallation of Windows did not do one thing...

  For now, I can just advise all users T500 WWAN to avoid Linux - Ubuntu, especially - at least until understand you what causes the strange behavior.

  Just my 50 ct other people with the same problem so some ideas on how to solve this problem.

  Stefan

• Question of RAM & SSD compatibility on old office

  I have an old Dimension 3100 / E310 system, Pentium 4 DT (Prescott 2.8 GHz).  When I look in the BIOS, he mentions that the memory is DDR2 533 Mhz.   When I pulled out one of the sticks of memory, I found that it is "Kingston ValueRAM 1 GB 240-pin DDR2 SDRAM DDR2 667 (PC2 5300) memory Fund model KVR667D2/1 gr.   This system is capable of managing more quickly than the DDR2 533 Mhz, comparable to what I got?

  I would like to hear from people who have tried a SATA ii SSD at this level.  Do you get the performance of SATA ii SSD disk or it revert to SATA I that this system is capable of speeds?

  Thanks for your reply.

  Found on the net answers to my two questions.  Higher frequency memory will operate only at the motherboard clock frequency - in this case to 533 Mhz.  Thus, no use to buy a frequency more high, unless they are found to be less expensive (for some reason any).   Others reported on the net about the use of SSDS on this computer, but I doubt if I get SATA ii on this motherboard.  Even a low-end SSD would be great improvement in performance.  It is perhaps impossible to find a SATA I ssd in the market today and it is likely that the ssd SATA II improved on the technology of base material and controller and will be retro-compatible with this motherboard.

• Re-use PCs as computer ThinClient with backup Windows 7 local installation

  Hi all

  The administration wants to try to move all public machines to use VMware View but worries about this defect while they want a local installation of Windows 7 on the boxes in an emergency. What would be your suggestions to take a Dell Optiplex 790 and act as a default computer ThinClient but have the option to connect to a local Windows 7 installation if needed?

  In the past, we have reallocated older Dells with a local installation of XP using this configuration

  http://Hyperinfo.WordPress.com/2009/06/26/VMware-view-client-as-a-shell-for-XPe-and-XP-Pro-clients/

  He basically calls customer view as default shell instead of Windows XP explorer.exe and if someone leaves out of the customer view that is called right back up. We have used a local group policy to cut the user's ability to use 'Ctrl + Alt + Del' so that they could not get into the Task Manager and run explorer.exe (or control panel or regedit etc...) but which proved a bit problematic if we wanted to make changes to the underlying XP install, we had to start mode without failure and set explorer.exe as shell by default... blah blah, blah...

  Any suggestions you could provide would be greatly appreciated.

  -Brian

  We use VDI of DevonIT blaster on our machines reassigned. We do the installation where it erases the hard drive and you can start only for the Thin Client but they have an installation option to do a dual-boot with the existing operating system. Very easy to install to Pop in the CD and a few clicks later, you're done.

  Having said that I prefer using the customer base material zero thought. Make management easier, faster start-up and low energy consumption are some of the benefits of the zero clients.

• How to make a good photo/video movie

  I have a camera that took pictures of 4000 x 3000 and 1280 x 720 HD audioseront want to make a HD DVD movie

  I wanted to use the first pro to make this film because ive become somewhat used

  I use this on a laptop 17-inch 1600 x 900

  but I don't see the full images in the body, I can add them but only one ~ quarter gets shown and even I export, it shows all

  How I can make this work or is there another product that can do this?

  Is there a setting I can change to make it work?

  Thnx for your help

  Start with this for the asnwers to your specific questions:

  "FAQ: how to choose the right sequence settings?

  It may be a good idea to take a step back and work your way through the base material first.

• Video resized when it is placed on the timeline

  So I have a video of 592 x 400, but when I place it in the timeline, preview on the right shows the video shrivelled and have black borders around the whole video. The video seems at this stage that it is 150 x 150 or maybe 200 x 200, but the point is, it's really small. I though that this case I coded it, it can produce the same as the original video, but no, it maintains the State of shrivelled. I encode in 592 x 400, so I don't know what is happening. Advice would be much appreciated.

  Is not in video, this is the base material and you must sequence settings to match the material.

• Remove the string from the text block

  I need to remove the following string "price: $5.80 -" block of text below... I have a bunch of text blocks similar to the one below, but they all have this kind of string to them ("price: $5.80 -")... Each text block has a 'price' and the end a '-' mark... Y at - it anyway to strip this line of each of my listings...
  
  M635
  Small ring Pull smooth w/back black patina
  Height: 1 3/16 "
  Width: 1 3/16 "
  "Projection: 1 3/16" 3/4 ".
  Base material: steel
  Screws: Screw Pack
  Price: $5,80-
  
  Thanks for the help!

  Discover the concept below code.

• Drop the materialized view's base table

  HI please let me know what happens if I drop from the base table of a materialized view? the MV remains valid with the data?

  Hello

  Well, it's easy to test yourself.

  SQL> select count(*) from t1;
  
    COUNT(*)
  ----------
         100
  
  SQL> desc t1
   Name                                      Null?    Type
   ----------------------------------------- -------- ----------------------------
   ID                                                 NUMBER(10)
  
  SQL> create materialized view t1_mv as select * from t1;
  
  Materialized view created.
  
  SQL> select count(*) from t1_mv;
  
    COUNT(*)
  ----------
         100
  
  SQL> drop table t1 purge;
  
  Table dropped.
  
  SQL> select count(*) from t1_mv;
  
    COUNT(*)
  ----------
         100
  
  SQL> desc t1_mv
   Name                                      Null?    Type
   ----------------------------------------- -------- ----------------------------
   ID                                                 NUMBER(10)
  
  SQL> select object_type, status from user_objects where object_name = 'T1_MV';
  
  OBJECT_TYPE         STATUS
  ------------------- -------
  TABLE               VALID
  MATERIALIZED VIEW   INVALID
  
  SQL> select * from t1_mv where rownum < 5;
  
          ID
  ----------
           1
           2
           3
           4
  
  SQL>
  

  I think the answer is very clear.

  Asif Momen
  http://momendba.blogspot.com

• How to speed up sqlldr import of a materialized view's base table

  Hi all
  
  We have a large base on a warehouse system table.
  
  We charge this table periodically by using SQL * Loader.
  
  The charges are generally 30 minutes and its supported. Recently, we have created a materialized view using this table as a table base (and his newspaper correspondents materialized view) mode to REFRESH FAST .
  
  Now we see that expenses will take much longer muuuch.
  
  We created the view as the ISC documentation, using COUNT (*) columns and refresh mode seems to work. BUT, why is it so slow? Is it possible to speed it up?
  
  Thank you in advance.
  
  
  Mariano
  Spain

  Hello

  You have all the nonunique indexes or indexes on base tables bitmap? If Yes, you can consider disabling or setting their USUSABLE, and rebuild them after charge, you can also consider using PARALLEL INDICATOR your query mview to speed up, but you need to test this on your system with suitable parallel degrees (No. = 2 CPU, parallel = 2).

  The amount of data you load?
  Is the partitioned table, if so, then what system is used?
  Have you considered materialized view partitioning and using PCT (track changes of partition) to refresh loaded recently loaded partition? the amount of data you have in this table?

  Concerning

• MacBook Air 11 "(mi-2011) material issue"

  Hi, I had a MacBook Air "Core i5" 1.6 11 "(mid-2011) a few months ago by my sister. I'm new to Mac, but I've been fixing PC for more than 20 years. Need a little advice on the model of this issue.

  Full specs are here MacBook Air (11 inch, mid 2011) - technical specifications

  Short story is that the Macbook Air was dead. After buying the screwdriver specialized to open the macbook air, I managed to get out the internal SSD Flashdrive on but as Apple uses customized connectors I had to buy an external case to test the drive and he was DEAD.

  So I installed El Capitan on an EXTERNAL drive plugged into the USB. It's a plus for Apple to initialize external drives and a nice feature.

  Once I got the macbook air I found following several breakdowns of equipment.

  1 SSD drive is dead

  2 camera and the Microphone is dead. No facetime.

  3 the POWER BUTTON is dead and holding down the macbook air will not shut. (I had to unplug the connector from the motherboard) This allowed me to switch on/off the computer buy pulling on the magsafe power supply.

  I have been fixing computers based on Windows for decades and never seen so many parts fail both.    WHAT CAN CAUSE THIS?

  At first I thought it was the logic board at fault, but I doubt that is the case. I can only assume a power SURGE or something to do as much damage.

  I was hoping to get this up and running for my daughter from school to save money, but unfortunately not the case. The price of all the ssd drive is high and he still has a chance to not work if the logic board is also damaged.

  THEN AND MATERIAL SPECIALISTS MACBOOK GOT SOME ADVICE?

  It's true that to fix the power button that is dead the keyboard needs to be replaced?

  Advice would be useful. For now I am able to use with the base of the cover off and the battery disconnected but is now portable way.

  Thank you very much

  cinospotts

  Like you, I had business with the PC and computers relatively old. You have quite the list, and you probably answered your own question. I have studied logic board only and lives at $ 200-300 min. purchase from a reliable source of Apple pieces. In my opinion.

  Put the Mac Air 2011 all back together and its trade.

  Refurbished MacBook Air 2015 11 "Apple. $759,00 with Apple 90 days and 1 year Apple Care warranty. All new accessories. Apple shall be their refurb as new Mac for this new experience of the box. Here is a link:

  Hz-dual-core-Intel-Core-i5 http://www.Apple.com/Shop/Product/FJVM2LL/A/refurbished-116-inch-MacBook-Air-16g

  Nobody here can estimate what your Mac Air recovery value holds, but the Apple Store can discuss with you. I hope this helps!

  Bravo!

• HP Pro book: updated Base system device

  I recently bought a HP Probook and I upgraded windows to earn 8.1. However, after installing the new windows and the required updates, I couldn't update the Base system device. I tried several time troubleshooting it and search for drivers online but it did not work. Could you help me?

  PCI VEN_1180 & DEV_E230 & SUBSYS_146D103C & REV_01
  PCI VEN_1180 & DEV_E230 & SUBSYS_146D103C
  PCI VEN_1180 & DEV_E230 & CC_088000
  PCI VEN_1180 & DEV_E230 & CC_0880

  It is the details of isd material I got when I checked its properties

  Hello

  Ricoh Media Card Reader driver
  http://support.Lenovo.com/us/en/downloads/ds038445

  Concerning

• HP Pavilion dv8-1099eo: device Base system and unknown device drivers Windows 7 Ultimate lack

  Hello

  Since a new installation of Windows 7 64 bit it is has little material without driver on all simply not recognised. Here is the hardware ID's I hope someone can help get this sort? Laptop computer runs much slower with the CPU it has. An upgrade from 4 GB to 8 GB of RAM is useful?

  1. base system device

  PCI\VEN_197B & DEV_2384 & SUBSYS_7001103C & REV_00
  PCI\VEN_197B & DEV_2384 & SUBSYS_7001103C
  PCI\VEN_197B & DEV_2384 & CC_088000
  PCI\VEN_197B & DEV_2384 & CC_0880

  2 - system base unit

  PCI\VEN_197B & DEV_2382 & SUBSYS_7001103C & REV_00
  PCI\VEN_197B & DEV_2382 & SUBSYS_7001103C
  PCI\VEN_197B & DEV_2382 & CC_088000
  PCI\VEN_197B & DEV_2382 & CC_0880

  3. base system device

  PCI\VEN_197B & DEV_2383 & SUBSYS_7001103C & REV_00
  PCI\VEN_197B & DEV_2383 & SUBSYS_7001103C
  PCI\VEN_197B & DEV_2383 & CC_088000
  PCI\VEN_197B & DEV_2383 & CC_0880

  4 - unknown Device

  ACPI\ENE0100
  * ENE0100

  Thank you

  Michael

  1, 2 & 3 is listed under "Driver-storage" JMicron card reader  ACPI\ENE0100 should be ENE CIR Receiver Driver under "driver-keyboard, mouse and input devices.

  On your page of Support here:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-DV8-1000-entertainment-notebook-PC-series/4011373/model/4040272#Z7_3054ICK0KGTE30AQO5O3KA30R1