Based on typing slow web - Satellite Pro U400 - 13K

Similar Questions

• Need driver Wlan for Satellite Pro U400 - 13K PSU45E

  Any ideas what driver should I use?
  I am presented with a list of three and no idea how to determine on what material I have.

  Thank you!
  Richard

  The laptop must use the Intel WLan card.
  Check this Toshiba WLan portal. You can find the compatible WLan driver:
  http://APS2.toshiba-tro.de/WLAN/

• New Satellite Pro U400-12y is very slow

  Just bought Satellite Pro U400-12y with Vista Business pre-installed (1 GB preinstalled memory).
  However, the startup is very slow and actually the computer seems to work in a time warp.

  Any ideas? Is there a fundamental problem?

  Yes, I have an idea.

  I think that the high amount of background processes affect the performance of laptops.
  He should know that the U400 supports many different features and these features are controlled by different applications.

  If you want you can start the msconfig and disable some unnecessary and unimportant process. Take a look in the Startup tab.

  In addition, I recommend to disable and remove the preinstalled software called Tempro.

  I did it on my system, and now it runs much faster

• Satellite Pro U400 - Web cam driver probem

  Hello

  Recently I bought the laptop Satellite Pro U400 series. Currently I am faced with a real problem with the webcam integrated. When I start my laptop, first it works and then after some time when trying to close and reopen it gives either of the below error messages
  "graphics make it fail."
  'driver open webcam fail, restart '.

  I try reinstalling the webcam Assistant software, but the problem still persists.

  A facing this kind of problem and if you know a solution, please tell me.

  Concerning
  Jesu

  The error message is known to me
  I think reinstalling webcam software and Vista update should contribute to this issue.

  So how to proceed;
  First remove the old webcam software.
  Then clean the operating system using the CCLeaner
  Then update the Vista of the State (you must restart the operating system several times)
  Then, download the new webcam software, unzip it and reinstall it.
  Restart the computer and check if the same error would reappear.

  Welcome them

• Satellite Pro U400 - BIOS update gone bad

  Hi all!

  I've updated the BIOS on my laptop and something was wrong, just not now a computer screen.

  I went to see the Web for Chris Bios recover.
  Have over 20 versions, but so far without success.

  My biggest problem is: I can't save on floppy disk 2 MB BIOS. All attempts to create a
  Flash or SD ended in failure.

  The laptop is: Satellite pro U400 PSU45E

  Please help me... the laptop reads the floppy in BIOS with little experience (the ones that come with Chris Bios 500Ko - 1000 KB) begins with a normal boot beep signals supposedly provided a definition blocks then baar times short beep and nothing to do...
  There must be something... BIOS BACK small size, emulator USB... BIOS to be torn down, so it is possible in charge from USB, SD...

  Every idea can be useful!

  Thank you very much

  Excuse my English

  f the subject isn't here, please redirect mderatora
  This is my 1 post here

  Hi mate

  Unfortunately if something was wrong during the update of the BIOS, then you won't be able to solve this problem without the help of a technician of the ASP

  I hope that the ROM BIOS module is not too bad
  In the worst case that the mobo is damage but maybe it s not damaged

  However. You must contact a local ASP and must ask for the manipulation of the Fryer!

  Good luck!

• Satellite Pro U400-15I - wheel of sound not working after installing Windows 7

  The wheel of sound on my Satellite Pro U400 - 15l does nothing after the clean install of Windows 7 to XP pro.
  I used the recommended software update tool downloaded from Toshiba. The VolumeIndicator.exe process is running and the sound works OK - but not under the control of the wheel! The Toshiba power control is not here, but this isn't a problem.

  Any suggestion is welcome.
  Bob Sheppard

  Hello

  Have you tried to update the audio driver of your laptop? You can check from Toshiba Web site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  You may notice any yellow exclamation mark in Device Manager?

• Satellite Pro U400 - 23 M - a good buy?

  I think of buying a Satellite Pro U400 - 23M. I currently have [Satellite P100-208 | http://uk.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&DISC_MODEL=0 & ACTION = PRINT_WITH_BACK & com decided .do w .broadvision = Yes & PRODUCT_ID = 122152] and I'm tired of the hazzle to carry a portable 17 "inches autour, it is also quite noisy.

  I just wanted to get a feedback from you guys about the U400 - 23M series. Here are the specs:

  • Intel Core 2 Duo T5870 2.0 GHz, 2 MB
  • 13.3 "TruBrite® WXGA 1280 x 800
  • 4 GB DDR2 800 MHz - max 8GB
  • 160 GB SATA 5400 RPM / min. S.M.A.R.T.
  • 8 x DVD ±RW burner double layer
  • Intel Graphics Media Accelerator 4500MHD
  • 24-bit stereo high-definition
  • 10/100 ethernet adapter and modem 56 k
  • Wireless 54Mbps 802. 11a / g
  • Battery Li - ion, battery life up to 3 hours (Mobile Mark 2007)
  • 3 x USB2, FireWire, eSATA, Bluetooth
  • Integrated 1.3 megapixel webcam
  • 5 in 1 card reader
  • Audio input and microphone
  • Operating system: Windows Vista Business (standard) with the option of Windows XP Professional
  • Only weighs 2.0 kg (about 4 pounds)
  • 2 years warranty in the world

  I have a few questions for you guys who own a laptop U400.

  Is - this treatment of 64-bit support? I don't know if the Vista operating system that is delivered is 32-bit or 64-bit.
  Run quietly and cool when they surf the web, type in Word and under the easy workload like that? It gets very loud and hot runs more demanding programs such as Photoshop CS3?
  I know that this video card is not ment for gaming, but manipulates her older games like Call of Duty 4?

  Do you recommend this laptop? I tried searching the Internet for customers, but I couldn't find the model U400 - 23M. What are the advantages and disadvantages on this laptop?

  Hi mate

  I n t have the Satellite Pro U400 - 23M, but I m an owner of the Satellite U400-10N.
  I use it in my office all I love this little baby.

  You should know that the U400 has 13.3 display and it of smaller than the P100.
  So you will definitely notice a difference.

  One of my friends said that 13.3 would be too low for him, but for me it s best. I can take everywhere and sometimes I m work while traveling around the world

  So I m very satisfied.

  I ve installed Win XP on this U400 and it s functions perfectly!
  But you can install Vista 64 bit too. The Satellite Pro U400 - 23M uses the Intel Core 2 Duo CPU T5870, that supports 64-bit

  But note; the U400 is not really a cellphone game hardcore.
  My U400 supports an Intel graphics chip and usually I only use it for office, graphic design (web) applications and web browsing.

• Can Satellite Pro U400-13I - I reinstall the CD/DVD creation software?

  Hello

  Can someone help me with my problem.
  I have a Satellite Pro U400-13I and use XP he. As I experienced some problems with the creation of CD, I decided to uninstall and reinstall.
  However, I am unable to find the program to install only the software above without having to run the XP DVD recovery (which will format the entire HARD drive), I have a lot of data and some third party software that I do not want to miss, so is unable to format the drive HARD rightaway.

  Would appreciate a solution

  Thanks in advance
  SJ

  What program you mean exactly for creating CD/DVD?

  If you mean the Toshiba disk creator I think it can t be downloaded. I checked from Toshiba Web site but I can't find it.
  But you can use another program to create CD/DVD, for example Nero or CD Burner XP (freeware).

  I hope I could help a bit.

• Re: Satellite Pro U400 - 13G: software uninstalled - FN keys do not work

  The other day I uninstalled many programs standard of his Toshiba Satellite U400 - 13G, because it has been very slow in implementing.
  But now I realized that his FN hotskeys does not work.

  I tried to look in the support forum and the list of drivers, but I can't find the answer.

  So the question is what program/driver should I install to get the keyboard shortcuts to work again. It is running vista 32 bit.

  Best looks Anders vangsgaard

  Hello

  Well buddy. For the future I'll give you a tip ;)
  Never remove any parts/software if you n t know what they are for ;)

  The Satellite Pro U400 - 13G seems belongs to the PSU45E series.
  Choose this model number to download driver form Toshiba Europe.
  Then download the package of value added.

  To reinstall this PPV you will need to remove the preinstalled old VAP.
  Do it and after rebooting again to install the new downloaded package added value.

  In my view, that the FN buttons should then work.

• Can I get the battery 9-cell for Satellite Pro U400 - 13G?

  Hey

  Can someone tell me if it is possible to get a battery 9 cells for Satellite Pro U400 - 13G.
  And if it is then what is the part number?

  Best regards Anders

  You know the Web from Toshiba website Options & accessories?

  See this page:
  http://EU.computers.Toshiba-Europe.com-> peripheral services & -> PS Options & accessories

  There you will find all the compatible options.

  AFAIK this battery could be compatible with the Satellite Pro U400 series:
  * Battery Pack (Li-ion, 9 cell, 6000mAh) PA3537U-1BRS *.

  Good bye

• Satellite Pro U400 - sound of the wheel does not work anymore

  The wheel of sound control in my Satellite Pro U400 works not properly since last month.

  Now, I have to use the volume bar in Vista to adjust properly. When I try to lower the volume by turning the wheel, as I did before, he constantly increases the volume after reducing to a few percent. If I flip it is very very slow, sometimes it decreases the volume a little, but other times it increases. Also when I'm in a word processor, turn the wheel to the right input 'c' character ' on the screen.
  There is no problem when I try to increase the volume, it does its job.

  Do you think it is related to hardware or can it be a problem of driver or something. Is there a solution?

  Thank you

  Hello!

  In your case, I would setup a pilot of his most recent. Search on the Toshiba site and check:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  I had this problem on another laptop Toshiba also and after reinstalling with the recovery disk the problem has been resolved. I also tried updating the drivers and so far, but without success.

  Good bye

• Satellite Pro U400 - 15 p hangs after enabling the Realtek RTL8187B WLan card

  Hello

  I recently bought the Toshiba Satellite Pro u400 - 15 p. This notebook is originally without any operating system included. I installed Windows XP Home SP3 on it and downloaded all the drivers from the Web from Toshiba website. Everything works well except the WiFi - RTL8187B.

  Driver has been installed correctly, when I turn the WLAN on everything is always OK, but when I connect to a network wireless Windows XP hangs after some time - without notice or BSOD - and the only thing I can do is to restart the PC holding down the button for 5 seconds.

  I have:
  -installed the latest BIOS (v3.70),
  -installed the last version of drivers available (v6.1150.1112.2008)
  -tried how it works on Vista Home Basic - it does not either, but on Vista only connection must be reset.

  I searched on the web (perhaps not all), including this forum, but I was unable to find a solution.
  Now I am seriously considering warranty claim, please help me to avoid that it ;)

  Hello

  It's really strange.
  Are you sure that this happens because of the WLan card activated 100%?
  I mean there could be another reason for this gel

  I'm U400 too and I m running Win XP and Vista without problem!
  At that time, I m using WiFi and everything works ok

  I think it s not a Wlan related question, but there must be another reason why this laptop locks maybe a problem of RAM or something like that.

• Satellite Pro U400 - TrueSuite Manager setup.exe has stopped working

  I have a Satellite Pro U400 running Vista Business (OEM) and at the start of a desktop computer TrueSuite Manager pop-up message appears telling me there is an update to install.

  When I try to install the update, I get a window that says Setup.exe does not work.

  Signature of the problem of the relationship an APPCRASH-is30C0.exe with the exception C0000005 code.

  I tried to uninstall the TrueSuite Manager through Windows uninstaller programs, but get the same message - setup.exe has stopped working.

  Appreciate advice on how to solve this problem.

  Hello

  I think that it is a simple case of corrupted registry entries and files that could belong to the TrueSuite Manager software.

  I agree with the previous user, and I recommend to reinstall this software again.
  You may need to clean the OS before installing the Truesuite again.
  In this case, I recommend the CCLenaer. It s a simple and free tool and can be downloaded on most Web sites.

  Google and you should find more information.

  See you soon
  Jayjay

• Satellite Pro U400-13 has - plenty of unwanted processes

  I recently got a laptop of [services computing iansyst | http://www.itspc.co.uk/computers/], to help me in my course of 3 years at the University.
  When I got it however, I found that it was full of many processes, start up to half of my 2 GB ram is used.

  Here is a picture of all the processes running at startup, I have already blocked a bit and added a few choices, but it slows down my system.
  http://img179.imageshack.us/img179/6972/taskmanagerdn9.PNG
  F-secure of anti-virus as iansyst provided me with.
  Acroynis is a service of windows to its original settings restore

  One of my main concerns is that there are several svchost.exes running, I don't know what can be the source of their good.

  Can someone tell me what process I need on my laptop Satellite Pro U400 13A? I want to delete a large number of them.

  Hello

  The svchost.exe is needed to run some dll files.
  The peacekeepers svchost.exe in Manager task several times because the Task Manager is not able to enumerate all this simple process.

  If you want to know which process is using the svchost.exe do this:
  In RUN, type * cmd * and press return.
  In the new window, type + Tasklist/svc | more + and press ENTER.
  Now you should get a list of simple processes that use the svchost.exe

  I also see many background processes belonging to F-Secure.
  As you say that it is a security Antivirus software and the process should t be disabled.

  There are also some processes that belong to the features for Toshiba laptop.
  They start by Tos.
  I would not recommend disabling these processes because you n t be able to use all the features of the laptop.

  But there are some processes that are not needed, such as Winamp, Acronis True image, O2 memory flash, google talk service and some others that are not known to me.

  Best regards

• Dynadock and Satellite Pro U400-135 - external monitor question

  Hello.
  We have a serious problem on the 26 dynadock vga e Satellite Pro U400-135 unit

  The problem is:
  If set to host as a single external monitor during startup frequent windows loses resolution external monitor.

  Example of resolution monitor post seting like 1280 x 1024, start with connected dyndaock, frequent resolution 1280 x 800 not correct and external monitor image not correct.

  Operating system is Vista 32 bit, driver dynadock is 2.3 update and dynadock displaylink displaylink site 4.6.16208 site.
  Same problem with Windows Xp 32 bit.

  How can I solve the problem?

  Hello

  If I understand the first message, external monitor resolution automatically goes to 1280 x 800 even if you set it to 1280 x 1024.
  I guess that your external monitor is connected to the dynadock.
  Is this good?

  AFAIK, you can customize the video settings of the dynodock.
  It provides a video output in two modes: Mode and extended Mode of mirror.

  Mirror mode creates an identical display of your computer to the external monitor screen. In mirror Mode, the dynadock automatically selects the settings (screen resolution, color quality and discount rates) for the external monitor that will allow the best resolution based on your computer's settings.

  Maybe you use the mirror mode and therefore the dynadock the resolution automatically because it of the best for the external monitor.

  I recommend checking the Dynadock manual for more details.
  There are two modes are described there.

  Welcome them