Based on Windows Vista unable to launch Java application

Similar Questions

• Satellite L40: Windows Vista unable to connect to the network

  My Satellite L40 laptop was connecting to my network wireless perfectly since Christmas. But two days ago, it stopped! I can see the networks available on the laptop but when I try to connect I get the message "Windows cannot connect to the network. Following the link to "Diagnose the problem" has no useful effect.
  I installed Windows Vista Service Pack 1 yesterday to try to solve the problem, but always without success.

  Any advice would be appreciated.

  Select this option.

  Hello

  Please go to the drivers Toshiba download page and download the latest Wlan driver for your wireless card installed, then remove the old driver and install a new one. It should work.

  Otherwise, you should try to recover your entire system and replace the drivers installed by some more recent...

  Welcome them

• Windows Vista unable to evaluate my system.

  When I have bin the outcome of my 64-bit Vista, I get an error
  a message that say... Cannot complete the operation asked. The system
  don't ' have supported media needed to complete the evaluation asked...

  in the log winsat file I have this
  968766 (2188) - winsat\main.cpp:2295:-START 2010\2\4 19:29:38 -
  969109 (2188) - winsat\main.cpp:2567: > IsFormal is TRUE IsMoobe = FALSE.
  969125 (2188) - winsat\main.cpp:2600: ERROR: no media, no support MM
  969249 (2188) - winsat\main.cpp:2161: > no need to restore the State of power supply (no object of Eve).
  969265 (2188) - winsat\main.cpp:2174 >: not necessary to reactivate the cache of the MDTS.
  969296 (2188) - winsat\main.cpp:3216: > exit value = 10.

  %SystemRoot%\Performance\WinSat\DataStore - IS EMPTY!

  Is anyone know how can I solve this problem?

  Hello

  East - the first time that you try to evaluate your Vista machine?

  You did it to the hardware changes?

  Here are the steps that you can try to solve your problem.

  Method 1: When you start Windows Vista for the first time or when the Windows experience index runs before you update a driver

  To resolve this problem when you start Windows Vista for the first time or when the Windows experience index runs before you update a driver, follow these steps:

  1. Click Start , type Tools and performance information in the Search box, and then click Performance Information and tools in the list of programs .
  2. If the following information appears, click Refresh now to update the Windows experience index:

  Your Windows experience index needs to be refreshed.

  If you are prompted for an administrator password or a confirmation, type the password or click continue .

  Windows experience index evaluates the components of the computer.

  1. Note the value that appears next to your computer has a Windows Experience Index base score of .
  2. Click update my score .

  If you are prompted for an administrator password or for confirmation, type the password, or click continue .

  Windows experience index evaluates the components of the computer.

  Note Mobile systems, connect the main power supply before you run performance tests. When you run tests, we recommend that you do not use the system for all other tasks. In addition, be aware that the screen may temporarily be empty.

  Method 2: update Windows Experience Index of Control Panel

  To do this, follow these steps:

  1. Click Start .
  2. Right click on computer .
  3. Click on Properties .
  4. Click on Windows Experience Index: not class .
  5. Click Refresh now .

  Method 3: update the Windows experience index to a command prompt

  To do this, follow these steps:

  1. Click Start , type command prompt in the Search box and press ENTER.
  2. Type the following command and press ENTER:

  WinSAT formal

  Method 4: After changing the hardware configuration of the computer

  To resolve this problem after you change the hardware configuration of the computer, follow these steps:

  1. Click Start , type the following path in the Search box and press ENTER:

  %SystemRoot%\Performance\WinSat\DataStore

  1. Remove all of the .xml files in the folder.
  2. Follow the steps in method 1.

  For more information, see the article below.

  http://support.Microsoft.com/default.aspx/KB/933478/en-us

  Let us know if this helps

  Concerning
  Anthony.

• New just installed Windows Vista, unable to connect to wireless networks

  So a few months ago my laptop (HP Pavilion dv6) fell from my bed and the hard drive was messed up, so I'm a computer geek friend to replace my hard drive and put a new operating system on it, he had no activation key. In any case, after I came back it was working fine and I was able to use the internet by connecting to public networks, but every time I would connect to my computer it asked me to activate it. And finally I got so bored with being bugged that I decided to buy a new product key, so that he'd stop bugging me. So I bought a new Windows Vista Home premium operating system and when I received it in the mail, I installed correctly and put in the product key and active it and all that much good but whenever I try to connect to the internet that it says "Windows cannot find wireless networks" and when I click on "Diagnose this problem" he says "this computer does not have an install_ adapter of» configured wireless network. and then it gives me options troubleshooting that brings me at all because most of them consist in some way to update my drivers online, but I can't online my laptop to update! and all the other solutions are just confused. Is there a reason why my "driver" would stop working AFTER you install Windows Vista? Or is there some way I can uninstall the operating system and just use the one I had before? Help please!

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista - no system sounds - no application in the volume component

  Windows Vista volume control pane, it is sndvol.exe, only shows the volume for master volume slider. Applications pane is empty. No sound from any application or system. iTunes displays the error message.

  Hello
   
  
  1. could you give us the complete error message that you meet with iTunes?
  
  Method 1.
  To automatically fix the audio problems, click Leresoudre this problem in the link button. Then click Run now in the Automated Troubleshooting Services page and follow the steps in this wizard.
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
  
  Method 2.
  You may also change the audio device by default, as this is explained in the article below. See the article below for steps and additional information on this.
  You may receive an error message when you run an application that uses the recording feature or audio playback in Windows Vista
  http://support.Microsoft.com/kb/930095
  
  Method 3.
  If the problem persists I recommend you update the drivers for sound card, such as mentioned in the article below. Also, you can uninstall the card its completely and re - install and then check.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  
  For additional help, see the articles below.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Vista unable to boot after installation of the update

  Hello.. I don't know where to ask this question... About 3 days ago my computer was working fine with Vista.  I closed the lid of my laptop, and when I opened it, it is stuck on the green scroll of the taskbar with Microsoft Corporation under him, as when you start up.  I run a system check, startup repair, restored to an earlier date... all I can think about... short reformatting and reloading... suggestions?  I am a teacher and my notebook (which is due by next Friday) is caught in the trap in the confusion!  Thank you
  Jenn

  Hi KieransMon08,

  Thank you for using answers Forum.

  Do you mean the computer freezes on this screen, forcing you to restart the computer from the laptop power button?
  You can log in in safe mode?

  Are there any error messages, that you can post on this forum?
  What happened when you tried to do system restore, did it fail or simply not to solve this problem?
  You have a Vista installation disc, or you use a recovery disk?
  How were you running the System File Checker and system restore?

  Impatience back on your part.
  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dreamweaver CS6 unable to launch the Application Manager because of a removed when Creative Cloud membership was cancelled, so cannot launch CS6. Application Manager new download I tried but he wants me to re-register. Maybe I need to old mana application

  I have a Dreamweaver CS6 which was installed stand-alone version on my Mac (OS 10.10.1) for a couple of years now and has worked well. Last year, I joined the creative cloud and got a single subscription to Dreamweaver CC. A week hardly, after 1 year, I cancelled the subscription. I wanted to go back to my old Dreamweaver CS6, but when I launched DW CS6 it grew up the account manager and he wanted me to activate my subscription again. So, through a long process to Adobe customer service, I deleted the application manager. But when I went to the DW CS6 launch, he said that the account manager was missing and impossible to verify the serial number. Then I reinstalled the new account manager to have the same problem occur.  I need to reinstall an OLDER version of the account manager so that it does not have to register again for the subscription of the CC? Is it still possible? Bottom line: how to launch my old DW CS6 stand-alone version without running account manager problems?

  Thank you!

  Run the cleaning CC/CS tool to wipe all traces of your system CS6.

  The Adobe Creative Cloud Cleaner tool allows to solve installation problems

  Perform a new installation of 12.0 CS6.

  Nancy O.

• Windows vista music folder example where I can find online?

  I used in my old clean windows vista laptop. Now I have windows 7. Is there anywhere where I can download the music old sample that vista had to offer? They had a great artist. I'll pay if I have to. Thank you.

  Hi FedericoMiamiFl,

  The sample music folder is built based on Windows Vista and you will not be able to download in Windows 7. However, you can share the folder. Sample of music is in the public folder by default. The Public folder is a convenient way to share files that are stored on your computer. You can share files in this folder by using other computers on the same network.

  Check out the link:

  Sharing files with the Public folder

  http://Windows.Microsoft.com/en-us/Windows-Vista/sharing-files-with-the-public-folder

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer

• Initial full Vista installation failed, shows 2 installs of Windows Vista from starting.

  Second installation was successful, but the installation failed initial always appears at startup upward. At a complete loss to know where to find entries that say my system there are 2 installs of Windows Vista. When launched the CD to 'view' where this "alternate" install is shows unknown HDD to address 0 w a lack of disk space. Of course, it is more than likely that only some files in the registry or the system "ask" that there is a current installation. Where can I find these to remove them? Have not found anything on any forum re: this issue. TYVM<3!>

  I see that a "MVP" edited the title of the question, but it did NOT reflect what the question. Please leave the full question in the title of the post. My problem is not a simple installation of 'failure '. I just want to find out where the entries are which are originally to show 2 Windows Vista o/s when I 'start' my computer when there are 'only' real installation. Note: I have two we HARD a WinXP Pro, the other Vista disks. At the start, it shows "Versions of Windows" and then Windows Vista and finally Windows Vista again. The non-existing o/s installation failed is the 3rd entry.

  Modify the boot.ini file to remove the installation failed (make sure that you remove the right pair) or in msconfig, check the boot paths

• Exe in 32-bit Windows XP works only not in 64-bit, Windows Vista

  Use the demo version of LabVIEW 8.6 since internet downloaded and Windows XP 32 bit OS. I have developed an application and creates an exe file which communicates with a card reader to USB chip. This exe file works fine with this USB device in Windows XP 32 bit OS.

  But when I used this application exe on Windows XP 64-bit OS and also in Windows Vista 64-bit OS, the application does not work. Communication with the USB smart card reader is not at all to establish. The USB device will be appropriate driver 32-bit and 64 - bit automatically when updating on various operating systems.

  How to solve this problem? I have to install all the drivers 64-bit for LabVIEW?

  Thank you

  Mathan

  Its often the simple thing miss us

  In fact, my application developed in WinXP, took always dll to the folder "data" and not the c:\windows\system32 folder. In Winscard.dll of Vista is different from the one in the WinXP. That makes the difference. The application now works when I manually copied the directory system32 under WinVista winscard.dll in the folder "data" application.

  Is anyway to do this without copying? This means, that I need the application to load the dll into the system32 instead of the folder directory "data"? I hope that I was clear?

  Thank you

  Mathan

• Where can I find a store that will sell me a disc of Windows Vista?

  For the love of pete, I spent the last hour trying to find a place that sells the Vista operating system! This is getting ridiculous!

  original title: WHERE can I GET a DISK of the VISTA OPERATING SYSTEM?

  Why is - this ridiculous that you can't find support for an operating system that is not sold by the manufacturer more?
  http://Windows.Microsoft.com/en-us/Windows-Vista/products/get
  "Microsoft sells more than Windows Vista, although we will continue to support."

  Contact the Original Equipment Manufacturer (OEM - like Dell, HP, Gateway, Lenovo, etc) for your computer system and see if they can send you a replacement DVD.  They will probably charge you a small fee.  They also can only provide you with a set of restore/recovery - not a real installation DVD.

  What happened to * your * DVD to install it with?  You still have your product key?  You copy the product key and put him in a safe place (should be accompanied by a copy of your original DVD of Windows Vista)?  What about your applications?  What your backups?

  You can still find out there - but if you already have a license - it would be stupid to buy most of what you might find (as it would be another license product key /.)

  Find a friend, a member of the family or a - best bet - a nice computer scientist willing to help out you.  Someone you KNOW however.  Let them know which edition of Windows Vista and what type (OEM, retail) as well as the architecture (32-bit or 64-bit).

• WINDOWS MEDIA 9 ON WINDOWS VISTA, NO NOISE, SNDVOL ENCODER. EXE COULD NOT BE STARTED WHEN I CLICK ON THE MIXER. Help!

  right... I just got a new computer, the vista Home premium 64-bit, and I use windows media encoder 9 series to stream live radio broadcasts... everything installs ok, but when I click mixer to sort my sound levels it gives me this error:

  "the mixer"sndvol32.exe"application could not be started. the system cannot find the specified file (0 x 80070002).

  I searched in google and microsoft, Web sites, I found a fix for vista, but when I try to install that he says theres a problem with this windows installer...

  I tried to run in compatibility mode for xp sp2

  Any help would be appreciated

  Hi DJ_KingSize,

  This problem occurs because some legacy applications use files or components that were developed prior to Windows Vista. The names of these audio components may be different in Windows Vista. If the calling application uses the hard-coded file names, the new files and components could not be found.

  To resolve this problem, use one of the following methods to change the audio settings for a device.

  Method 1: Use the order Volume of Windows

  To use the Volume of Windows command to change the audio settings for a device, follow these steps:

  1. right click on the speaker in the notification area icon and then click recording devices or reading.

  2. double-click on the device for which you want to adjust the settings. For example, double-click on Microphone.

  3. click on the levels tab.

  4. move the cursor upwards or downwards to set the desired volume level, and then click OK

  Method 2: Use the control panel

  For control panel allows you to change the audio settings for a device, follow these steps:

  1. Click Start, click Control Panel, click hardware and sound and then click sound.

  2. click on the playback or recording.

  3. double-click on the device for which you want to adjust the settings. For example, double-click on Microphone.

  4. click on the levels tab.

  5. move the cursor upwards or downwards to set the desired volume level, and then click OK.

  For more information, see the link below:

  You may receive an error message when you run an application that uses the recording feature or audio playback in Windows Vista

  http://support.Microsoft.com/kb/930095

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to launch the App with DONKEY

  I was unable to launch an application that uses a native extension. Everything compiles without error, but when I go to launch the application that closes before either one has started. That left me unable to even to debug the application.

  I have removed all references to the extension of the code, but am still group the .swc and .ane files (as well as a reference in the - app.xml). Does anyone have any ideas what can cause this behavior?

  By creating your DONKEY, under QCC Linker/library, you have added for all configurations of AirStub? Under the side AS3 you have arguments "- swf - version 13" added to your compiler?

• Unable to launch application - EAS

  Hello
  
  I can fire up EAS on the server (by using the console), but when I use explore other customers.
  
  I get "unable to launch the application" application error EAS name,.
  
  When I click Details-> unsigned resource (http://servername:10080/easconsole/easclientplugin.jar) entry found error
  
  I applied planning patch 9.3 . 1.1.16 (that I also updated easclientplugin.jar)
  
  
  Help, please

  You patch EAS with the right files to the patch of planning?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Launch KVM console: could not launch the application

  I have a UCS C220 M3S with MMIC 1.5 (4 d). When I try to launch the KVM Console, I get a popup with "unable to launch the application.

  Windows 7

  33.1 Firefox

  Update Java Version 8 25

  Exception:

  com.sun.deploy.net.FailedDownloadException: could not load the resource: https://10.85.162.187:443/software/avctNuova.jar
  at com.sun.deploy.net.DownloadEngine.actionDownload (unknown Source)
  at com.sun.deploy.net.DownloadEngine.downloadResource (unknown Source)
  at com.sun.deploy.cache.ResourceProviderImpl.getResource (unknown Source)
  at com.sun.deploy.cache.ResourceProviderImpl.getResource (unknown Source)
  to com.sun.javaws.LaunchDownload$ DownloadTask.call (unknown Source)
  at java.util.concurrent.FutureTask.run (unknown Source)
  at java.util.concurrent.ThreadPoolExecutor.runWorker (unknown Source)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (unknown Source)
  at java.lang.Thread.run (unknown Source)

  Wrapped exception:

  javax.net.ssl.SSLHandshakeException: received fatal alert: handshake_failure
  at sun.security.ssl.Alerts.getSSLException (unknown Source)
  at sun.security.ssl.Alerts.getSSLException (unknown Source)
  at sun.security.ssl.SSLSocketImpl.recvAlert (unknown Source)
  at sun.security.ssl.SSLSocketImpl.readRecord (unknown Source)
  at sun.security.ssl.SSLSocketImpl.performInitialHandshake (unknown Source)
  at sun.security.ssl.SSLSocketImpl.startHandshake (unknown Source)
  at sun.security.ssl.SSLSocketImpl.startHandshake (unknown Source)
  to sun.net. www.protocol.https.HttpsClient.afterConnect (unknown Source)
  to sun.net. www.protocol.https.AbstractDelegateHttpsURLConnection.connect (unknown Source)
  to sun.net. www.protocol.http.HttpURLConnection.getInputStream0 (unknown Source)
  to sun.net. www.protocol.http.HttpURLConnection.access$200 (Unknown Source)
  to sun.net. www.protocol.http.HttpURLConnection$9.run (unknown Source)
  to sun.net. www.protocol.http.HttpURLConnection$9.run (unknown Source)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.security.AccessController.doPrivileged (unknown Source)
  to sun.net. www.protocol.http.HttpURLConnection.getInputStream (unknown Source)
  to sun.net. www.protocol.https.HttpsURLConnectionImpl.getInputStream (unknown Source)
  at com.sun.deploy.net.HttpUtils.followRedirects (unknown Source)
  at com.sun.deploy.net.BasicHttpRequest.doRequest (unknown Source)
  at com.sun.deploy.net.BasicHttpRequest.doRequest (unknown Source)
  at com.sun.deploy.net.BasicHttpRequest.doGetRequest (unknown Source)
  at com.sun.deploy.net.DownloadEngine.actionDownload (unknown Source)
  at com.sun.deploy.net.DownloadEngine.downloadResource (unknown Source)
  at com.sun.deploy.cache.ResourceProviderImpl.getResource (unknown Source)
  at com.sun.deploy.cache.ResourceProviderImpl.getResource (unknown Source)
  to com.sun.javaws.LaunchDownload$ DownloadTask.call (unknown Source)
  at java.util.concurrent.FutureTask.run (unknown Source)
  at java.util.concurrent.ThreadPoolExecutor.runWorker (unknown Source)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (unknown Source)
  at java.lang.Thread.run (unknown Source)

  Downgrade of Java 7 u21 (delete other versions of Java installed) and let us know.

  http://www.Oracle.com/technetwork/Java/javase/downloads/Java-archive-Dow...

  -Kenny