Basic error
Hello again, now I get a fundamental error, I don't know why, if someone can help thanks,
my character is turning to the background, how to fix this? http://prntscr.com/5ib7qi
This is because you do not properly apply regardless of the solution you are trying, and it is not possible to say why it's a failure because you haven't provided any info.
Tags: Adobe Animate
Similar Questions
-
What is "agile basic error" and why I can't get rid of?
I tried to place an order with the company of Melitta coffee. Everything is going well until I hit the "place an order" and then comes back the gibberish "agile basic error" and I cannot cross it, get rid of it, and I am never able to place my order.
This is an error with the server of the Web site. Please contact website assistance.
-
Windows Installer does not not with vista basic error code #641
WINDOWS INSTALL DOES NOT WORK ON VISTA BASIC. I HAVE RCD CODE ERROR #641 PLEASE HELP
Hi yorkieczar,
Please take a look at the following information thanks to a post above by PA bear MS MVP:
There is no doubt in my mind that System Mechanic caused this!
And you have plenty of company, too. See these recent discussions-online
~~~~~~~~~~~~~~~~~~~~~~~~
OPTION A: If you have backups of ALL System Mechanic has EVER done on your computer changes, restore ALL the & restart and test - and then uninstall System Mechanic & some other registry cleaners. [1]
OPTION B: methods to execute the RESOLUTIONS 1, 2 and 3 in http://support.microsoft.com/kb/2642495 then reboot & test.
OPTION C: Contact System Mechanic (iolo.com) support, assuming you have purchased System Mechanic Professional.
===========================================================
[1] TIP: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspxOriginal thread:
I hope this helps!
-
Basic error DV6 2170 EA system device
I changed my hard drive to my 2170ee dv6 and I installed Windows 7 Ultimate 64, but I had 3 systembase error and an unknown device in Device Manager. the values are the following:
PCI\VEN_197B & DEV_2382 & SUBSYS_3659103C & REV_00
PCI\VEN_197B & DEV_2382 & SUBSYS_3659103C
PCI\VEN_197B & DEV_2382 & CC_088000
PCI\VEN_197B & DEV_2382 & CC_0880PCI\VEN_197B & DEV_2383 & SUBSYS_3659103C & REV_00
PCI\VEN_197B & DEV_2383 & SUBSYS_3659103C
PCI\VEN_197B & DEV_2383 & CC_088000
PCI\VEN_197B & DEV_2383 & CC_0880PCI\VEN_197B & DEV_2384 & SUBSYS_3659103C & REV_00
PCI\VEN_197B & DEV_2384 & SUBSYS_3659103C
PCI\VEN_197B & DEV_2384 & CC_088000
PCI\VEN_197B & DEV_2384 & CC_0880ACPI\HPQ0004
* HPQ0004Hello
Download and install the following.
Kind regards
DP - K
-
We have installed just 6.2.0 with hotfixes 2 and 4. Whenever we try to open any type of technique, we get this error. Upgrade SQL server from 6.1.1.4 at 6.2 db. Any ideas?
Exceptions: System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.FormatException: the entry is not a valid Base 64 string because it contains a character not in base 64, more than two padding characters, or an illegal character among the padding characters. at System.Convert.FromBase64_Decode (Int32 inputLength, Char * startInputPtr, Int32 destLength, Byte * startDestPtr) to System.Convert.FromBase64CharPtr (Char * inputPtr, Int32 inputLength) at System.Convert.FromBase64String (String s) at Xeno.Prodika.GeneralServices.Services.DataExchange.Serialization.PhasephraseBasedRijndaelStringEncryptor.Decrypt (String value) at Xeno.Reporting.Service.ReportGenerationService.Config.ReportingServiceConfigParser.GetReportEngineServiceConfiguration (XmlNode childNode) at Xeno.Reporting.Service.ReportGenerationService.Config.ReportingServiceConfigParser.ParseServiceConfigNode (XmlNode node) to Xeno.Reporting.Service.ReportGenerationService.Config.ReportingServiceConfigParser.Parse (XmlNode root) at Xeno.Reporting.Service.ReportGenerationService.Config.ReportingServiceConfigSectionHandler.Create) The parent of the object, object configContext, XmlNode section) to Xeno.Prodika.XML.XMLMergeConfigHandler.LoadObjectFromXML (parent of the object, object configContext, XmlNode node) to Xeno.Prodika.XML.XMLMergeConfigHandler.System.Configuration.IConfigurationSectionHandler.Create (parent of the object, object configContext, XmlNode section) at Xeno.Prodika.Config.XMLManager.XMLConfigurationManager.GetConfigItem (String xPath) at Xeno.Prodika.Config.XMLManager.XMLConfigurationManager.GetConfig (String xPath) at Xeno.Reporting.Service.ReportGenerationService.ReportGenerationControllerServiceFactory.Create (IExecutionContext execContext, IBlockingResourcePool servicePool) at Xeno.Prodika.Services.SessionServiceFactory.Create_Internal (execContext, IBlockingResourcePool servicePool IExecutionContext) to Xeno.Prodika.Services.AbstractAttributeAwareFactory.Create (IExecutionContext execContext, IBlockingResourcePool servicePool) at Xeno.Prodika.Services.ServiceManager.Xeno.Prodika.Services.IServiceManager.get_Item (String key) at Xeno.Web.UI.Common.Redirects.ReportGeneration.ReportChannelResolutionResult.IsChannelValid (String objectPKID, String applicationName, String objectType) at Xeno.Web.UI.Common.Redirects.ReportGeneration.ReportGenerationURLGenerator.IsChannelValid (String objectPKID, String applicationName, String objectType) at prodika.ctlActionMenu.LoadContext_Handler (ByVal sender As Object, args to LoadContextEventArgs) at Xeno.Web.UI.NavigationControls.NavigationControlContainer.OnPreRender (ByVal e As EventArgs) at System.Web.UI.Control.PreRenderRecursiveInternal () at System.Web.UI.Control.PreRenderRecursiveInternal () to System.Web.UI.Control.PreRenderRecursiveInternal () at System.Web.UI.Control.PreRenderRecursiveInternal () at System.Web.UI.Control.PreRenderRecursiveInternal () at System.Web.UI.Control.PreRenderRecursiveInternal () at System.Web.UI.Control.PreRenderRecursiveInternal () at System.Web.UI.Control.PreRenderRecursiveInternal () at System.Web.UI.Control.PreRenderRecursiveInternal () at System.Web.UI.Control.PreRenderRecursiveInternal () at System.Web.UI.Control.PreRenderRecursiveInternal () at System.Web.UI.Control.PreRenderRecursiveInternal () at System.Web.UI.Control.PreRenderRecursiveInternal () at System.Web.UI.Control.PreRenderRecursiveInternal () at System.Web.UI.Control.PreRenderRecursiveInternal () at System.Web.UI.Control.PreRenderRecursiveInternal () at System.Web.UI.Page.ProcessRequestMain (Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.HandleError (Exception e) at System.Web.UI.Page.ProcessRequestMain (Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest (Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest () at System.Web.UI.Page.ProcessRequest (HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute () at System.Web.HttpApplication.ExecuteStep (IExecutionStep step, Boolean & completedSynchronously)
You have overridden the question of translation, but the value does not exist in
TranslationValues. Please run the sql below to find all the items substituted translations are missing. SELECT ti.pkid, ti.ID FROM commonTranslationItems ti LEFT OUTER JOIN
TranslationValues ci ON ti.pkid = ci.fkTranslationItem AND ci.langID = 0 WHERE ti.proprietary = '1' AND ci.pkid IS NULL; If you are not able to find the cause, please make it not substituted to work around the problem.
UPDATE commonTranslationItems SET proprietary = '0' WHERE pkid in ( SELECT ti.pkid FROM commonTranslationItems ti LEFT OUTER JOIN
TranslationValues ci ON ti.pkid = ci.fkTranslationItem AND ci.langID = 0 WHERE ti.proprietary = '1' AND ci.pkid IS NULL); -
My laptop 'stuck' and windows wouldn't load, I had to restart everything (I'm not a technophobe!), on the fact that he told me that I needed to update back to 8.1.
However, I could not do this as he told me that I had to update windows 8 first of all - but update will not work.
What do I do on Earth?
http://support.Microsoft.com/kb/958044/en-us
Windows Update, error 0 x 80070490
Step 1: Use SFC system to repair damaged Windows files use System File Checker to repair damaged Windows files. To do this, follow these steps:
- Open an elevated command prompt.
- Run the command "sfc/scannow".
- Try installing the update again.
For more information about the System File Checker tool, see using the tool File Checker system to repair missing or corrupted system files
(http://support.microsoft.com/kb/929833). Step 2: Run the DISM tool if the problem persists, use the Deployment Image Servicing and Management (DISM) tool to fix corrupt Windows Update errors. To do this, follow these steps:
- Open an elevated command prompt.
- Run the command "DISM.exe Online/Cleanup-image /Restorehealth".
Important When you run this command, DISM uses Windows Update to provide the files that are necessary to fix corruptions. However, if your Windows Update client is already broken, use a Windows install running as the source of the repair, or use a Windows side-by-side folder from a network share or removable media, such as the Windows DVD, as the source of the files. To do this, run the following command instead:DISM.exe / Online/Cleanup-Image /RestoreHealth / Source: C:\RepairSource\Windows /LimitAccessNote Replace the placeholder C:\RepairSource\Windows by the location of your source of repair. For more information about using the DISM tool to repair Windows, refer to a windows repair Image
(http://technet.microsoft.com/en-us/library/hh824869.aspx).
-
created class... first help w / a pretty basic error
I created my first class (class is default (Server) located in packaging resources). All the class, is a collection of approximately 5 string variables. I did not define a constructor for the class, and I wonder if this is what causes the problem that I see. AutoComplete seems to work very well because it is the members of the class, but I get the following error when I try and was a member of the class value.
Error = 1120: access of undefined property foo
Can someone give me a pointer?
Here's the class definition
resources {package
public class Server {
public var ServerName:String.
public var ServerIPAddress:String.
public var ServerWeight:Number.
public var ServerProtocol:String.
public var ServerPath:String.
public var ServerPort:Number.
public service default (Server)
{
/ / TODO: implement funct ion
}
}
}
and here's how to use it
Import resources. Server;
public var foo:Server = new default (Server);
foo. ServerIPAddress =
"1.2.3.4" ;
var foo:Server = new default (Server);
foo. ServerIPAddress = '1.2.3.4 ';
Place this line in goBasic()
public function goBasic (): void
{
foo. ServerIPAddress = '1.2.3.4 ';
.......
-
Basic error / exception management Question
Hello
I searched on the dev guide, forum, etc., and I can't always find any concise information on how to handle errors or make treatment in the APEX of the exceptions.
Simply that I missed it completely!
For example, I want to run a prior deletion process (pl/sql), and if it fails - I don't want the following process to remove the record! I'm actually trying to remove a name before OID tns descriptor I delete my application tns name record.
I'm trying to do so by the presence of a process that is called on the delete key after calculations and validations--but--with a sequence number - lower than that of the automatice rank of treatment.
This should be simple, right?
I'm assuming that I need to throw an exception some how in my pl/sql block when it fails; Also, make sure that the treatment STOPS - I don't want the record to delete.
Sincere thanks,
Troy
Published by: troydba on June 9, 2009 14:52Troy,
You can create a hidden page element, say P1_X. create an after - submit calculation to set P1_X to null.
In the first process, if the operation fails (and you want to prevent deletion of records in the second process), set P1_X to a non-null value, for example,
: P1_X: = "stop";
Adding a condition (type element is null) for the second process, naming P1_X as element in the condition. The process is triggered only if P1_X is null.
Scott
-
Very basic error, don't know his reason
Hello
I use your Express measure to calculate the amplitude and frequency of the signal to simulate for verification of the base.
Here if I connect the control of the frequency of the signal of the simulation, the vi correctly while when I disconnect the frequency of the signal to simulate, the measure of your Express does not have a correct reading for the Amplitude and frequecny. While the graph is displayed correctly.
Is this a bug or a mistake in the programming.
Pls help out.
Thank you
I did to change the number of samples to 400:
and then I get to the values that you used (8 Hz, 21 amp frq) this signal and correct estimates:
-
Have HP Pavilion a6110n and windows Vista editions Home premium. A reboot from recovery disc and Noah update will not work. System has also disabled the netgear router and killed a comcast modem. I think I need computer trash HP 6110.
Hello
Repair windows files, to do this, perform an inplace upgrade which would help. -
Error handling and the basic flow data
Hello
I'm learning the basic error data and flow management. The seal is a simple VI to implement this.
How do I implement this code to display an error.
Thank you.
You must assign a value of your choice for the cluster of error - in errors generated by the LabVIEW functions, error is already assigned/etc, but to find user customized errors, the user must assign values. Just make sure you do not use the same error values that LabVIEW uses for predefined errors. If you do a search for error codes, you will be able to find this error varies from code - so pick something that is not already used.
And Yes - using an error handler would be a simple way to accomplish what you're trying to do. This error handler will appear a message error only if your feature will remain smooth.
-DP
BatchTest Corp.
NEITHER Alliance Partner
-
Error Visual basic prevents the compilation of Word or Excel docs in OPM
Hello
I just installed 10.4.4.21 on Windows 8 with office 2013 OPM.
I can't compile Word or Excel documents due to errors in script.
Word launches Visual Basic error message: "run-time error '429', ActiveX component can't create object.
Excel error: "error running 91', variable object or With block variable not set."
Any ideas?
Nick
The development of the OPA team posted some troubleshooting tips for people with problems of market OPM 10.4.4 with Windows 8 and Office 2013: https://community.oracle.com/thread/3542454
See you soon,.
Jasmine
-
System error memory dump files
Is it safe to delete system error memory dump files after you run a cleaning disc? Also what are system error memory dump files?
Hi Cookie5354,
Basically, error, say a blue screen of death (BSOD) Windows gathers all available information stored in memory at the time of the incident and that she "pours" in a file. The file can then be used by a support technician to determine what could perhaps have the error in the first place. Sometimes, when an error occurs on Windows will ask you if it can information additional NMCS to Microsoft. If you press the Yes button on the request message that appears, then Windows will download the dump to Microsoft Server files.
Dump files are useful "but" they have the bad habit of taking a lot of space, so it is beneficial remove files to recover the space they occupy. Personally, I use a freeware thrid party application called CCleaner (www.piriform.com) If you use this and look at the bottom of the left side of the window of CCleaner, you will see a list of options what it removes. "Remove Windows error reports" is not checked by default, but I it check every few weeks or so, so that it clears the resports old error that are no longer needed.
So, in answer to your question, yes they can be deleted.
This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com
-
Windows Vista - unexpected error occurred during system restore
original title: an unexpected error occurred during system restore, did not finish no codes.__vista Home Basic error
HELP PLEASE. THANK YOU, RICK
Some security programs prevent changes to their file and must be configured to allow the restoration of the system work. For example, if your computer has Norton Antivirus or Norton Internet Security, you must disable Norton product Tamper Protection before you run the system restore. See the documentation of your security program. Boulder computer Maven
Most Microsoft Valuable Professional -
Windows 64-bit error: 203: unknown error
Hello
I created a SID for a database of pending.
The standby database is started but not mounted. I can't go up already because the control file is not yet created. And I need to create it using RMAN Duplicate.
I use RMAN to duplicate the DB.
C:\Users\Administrateur > rman
Recovery Manager: release 11.2.0.4.0 - Production on March March 31 10:58:33 2015
RMAN > Connect target sys
Password of the database Donnues target:
ConnectU O the basis of target Donnues: SERVESRI (DBID = 1513335513)
RMAN > Connect auxiliary sys@standby1
The auxiliary Donnues database password:
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-04006: the auxiliary Donnues basic error: ORA-12518: TNS: Ucoute process failed to transmit the client connection
The listener log file shows:
Thu Apr 02 10:25:14 2015
02 APR. -2015 10:25:14 * (CONNECT_DATA = (SERVICE_NAME = standby1) (CID = (PROGRAM=c:\oracle\product\11.2.0\dbhome_1\bin\ORACLE. (EXE) (Host = serv-SIGORACLE)(User=syst?me))) * (ADDRESS = (PROTOCOL = tcp (PORT = 55354))(HOST=10.0.10.9)) * establish * standby1 * 12518
TNS-12518: TNS: the process of "listening could not transmit the client connection.
AMT-12560: TNS: Protocol adapter error
AMT-00530: Protocol adapter error
Windows 64-bit error: 203: unknown error
Here are the files of the network:
LISTENING PORT. ORA
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = STANDBY1)
(ORACLE_HOME = E:\app\Administrateur\product\11.2.0\dbhome_2)
(SID_NAME = SLEEP)
)
)
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = Serv-sigorapra)(PORT = 1521))
)
ADR_BASE_LISTENER = E:\app\Administrateur\product\11.2.0\dbhome_2\log
TNSNAMES. ORA
SERVESRI =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = SERV - SIGORACLE.sivoa.local)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = SERVESRI)
)
)
STANDBY1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = SERV - SIGORAPRA.sivoa.local)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = standby1)
)
)
LSNRCTL status INDICATES:
C:\Users\Administrateur > lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.4.0 - Production on 02 - APR. 11-2015:
05:33
Copyright (c) 1991, 2013, Oracle. All rights reserved.
O connection (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = Serv-sigorapra)(PORT=1521)
))
STATUS of the LISTENING PROCESS
------------------------
Alias LISTENER
TNSLSNR for Windows 64-bit version: Version 11.2.0.4.0 - Prod
ction
Date 02 - APR Duke. -2015 11:02:25
Durue of Activitu 0 days 0 hours 3 min 9 s
Trace level off
Sucuritu ON: OS local authentication
SNMP OFF
The process of Ucoute E:\app\Administrateur\product\11 paramÞtres file
.2.0\dbhome_3\network\admin\listener.ora
The process of Ucoute E:\app\Administrateur\product\ log file
11.2.0\dbhome_2\log\diag\tnslsnr\Serv-sigorapra\listener\alert\log. XML
' Rucapitulatif d Extrumitu ' Ucoute d points '...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = Serv - sigorapra.sivoa.local)(PORT=152)
(1)))
Services of Rucapitulatif...
The service "STANDBY1" includes 2 occurrences.
The instance "STANDBY" status UNKNOWN, includes 1 Manager (s) pour this served
this...
The "standby1" instance, BLOCKED status, includes 1 Manager (s) pour this serv
ice...
The command of a Ruussi
TNSPING IS OK:
C:\Users\Administrateur > tnsping standby1
AMT Ping Utility for 64-bit Windows: Version 11.2.0.4.0 - Production on 02 - APR.
-2015 11:06:30
ParamÞtres Utilisus files:
E:\app\Administrateur\product\11.2.0\dbhome_3\network\admin\sqlnet.ora
Utilisu TNSNAMES adapter pour the Rusolution of the alias
Attempt to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TC
((P) (HOST = SERV - SIGORAPRA.sivoa.local)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NA
= ME standby1)))
OK (0 msec)
Thank you for your valuable help!
I found the solution to the problem.
He has been adding line efollowing ht for the tnsnames.ora:
(UR = A)
Source:
ORA-12528: TNS listener BLOCKED - trying to duplicate database
Maybe you are looking for
-
How can I use a context menu to change values in the numbers?
I would use a context menu to view different values depending on whether you choose. example: projects sheet 1: projects, broken down by supplies, each of the deliveries was the price. I currently have this game to show me all the neede resources to
-
DesignJet 5500: DesignJet 5500 error 5015
I have a 5500 DesignJet. I changed the ink, cartridges and the dye prinheads 81 to 83 UV tubes. I get error printhead code 5015 (only the black print head) which is a print head "internal power failure" or "Printhead Cleaner is not correct type" acc
-
Satellite L550 - cannot install the display driver for Vista 64 bit
Hello I have a problem with my L550. The display driver does not work after installing Vista Ultimate 64. What can I do? I launched the driverpakage from the Toshiba site. It has been extracted, but after this procedure,... nothing! There is only the
-
By Satellite L300D/PSLCGE: pilot, esp. WLAN Driver
Hello I bought a Satellite L300D without cause OS I have a Vista Edition home premium 64-bit.I was a little surprised that no driver disk has been delivered. Good - I found the download page for the driver for this laptop (www.toshiba-tro.de) and a R
-
I have a HP Slate 7 model 2800. My screen started dimming automatically when I open a book on my kindle, reading program. It works fine in other applications. There is no automatic dimming function and set the intensity setting. Is there a problem wi