Basic measures and the output impedance of the change with PXI-4461?

Similar Questions

• I can't delete a game called Float that gives the message waiting. The cross and the oscillation with delete option appear, but it won't when I select Remove. Any ideas please?

  I have a new mini iPad 4. I can't delete a game called Float that gives the message waiting. The cross and the oscillation with delete option appear, but it won't when I select Remove. I don't know how it came to be. Any ideas please? Thank you.

  First try a reset to see if it finishes downloading. Press and hold the home and power buttons until the Apple logo appears. Release the two buttons. Wait until the iPad tour starts on its own.

  Check if you can remove the application. If not go into settings > general > use iCloud and storage > storage > storage management. Wait for the list of apps to open. See if the float is on the list. If it is delete it from there.

• "I lost the top of my Web page that has"File"Edit etc and the toolbar with the House for 'House' and the arrow of" return to the last page. Does anyone know how to reinstall these? I'm obviously not computer savy.

  Missing once more, the blue band at the top of my Web page that has the file ',' Edit etc and the toolbar with the House for 'Home' and the arrow «back to last page»

  == My grandchildren's play about that.

  Press the Alt key to display the Menu bar, then open view > toolbars and select menu bar and the bar of Navigation, so that they have a check mark.

• The active network connection icon keeps changing on me. He began by showing only 2 connections to the internet and the changes and then later to 3.

  Hi, the active network connection icon keeps changing on me.  He began by showing only 2 connections to the internet and the changes and then later to 3. But does not show where is this extra connection to connect to the local network.  I have a laptop so no wireless and cannot understand why he continues to display an additional connection.

  original title: network access connection

  Hello

  1. what version of Windows operating system do you use?

  Click on the link below.

  http://Windows.Microsoft.com/en-in/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  2 has there been any changes to your computer until the problem occurred?

  3. have you installed all types of network adapters on your computer?

  4. are you able to connect to the network and browse the Internet?

  I suggest you to follow the troubleshooting steps and check if the problem on your computer is resolved.

  Method:

  Check if the network adapter is displayed in the Device Manager.

  a. right click on computer or workstation.

  b. Select manage.

  c. click Device Manager on the left was next to the window.

  d. on the right side, locate the network adapters and click the arrow to expand the menu.

  If you have multiple NICs installed (watch), I suggest you uninstall the network adapters that is irrelevant to your computer by right-clicking on the adapter irrelevant and selecting Properties and then select uninstall.

  Please provide us with additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• whenever I click on a program, that it does not open and the 'open with' screen appears

  whenever I click on a program, that it does not open and the 'open with' screen appears

  Hello

  Use above message for intense and thorough check for malware.

  To restore the ability to run any .exe programs.

  1 make a Restore Point so that you can come back if necessary back although probably not required.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  2. copy BETWEEN these lines and paste it into Notepad - save as exefileFix.reg - then right
  Click on it and FUSION - REBOOT

  DO NOT COPY THE LINES
  -----------------------------------------------------------------

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\. [EXE]
  @= "exefile".
  "Content Type"="application/x-msdownload".

  [HKEY_CLASSES_ROOT\. EXE\PersistentHandler]
  @= "{098f2470-bae0-11cd-b579-08002b30bfeb}".

  [HKEY_CLASSES_ROOT\exefile]
  @= "Application".
  "EditFlags" = hex: 38, 07, 00, 00
  "FriendlyTypeName" = hex (2): 40, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52,------.
  00, 6f, 00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 33, 00,------.
  32,00, 5 c, 00, 73, 00, 68, 00, 65, 00, 6 c, 00, 6 c, 00, 33, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c,
  00, 2 c, 00, 2d, 00, 31, 00, 30, 00, 00, 31, 35, 00, 36, 00, 00, 00

  [HKEY_CLASSES_ROOT\exefile\DefaultIcon]
  @="%1"

  [HKEY_CLASSES_ROOT\exefile\shell]

  [HKEY_CLASSES_ROOT\exefile\shell\open]
  "EditFlags" = hex: 00, 00, 00, 00

  [HKEY_CLASSES_ROOT\exefile\shell\open\command]
  @="\"%1\" %*"
  ""IsolatedCommand"="\"%1\" %. "

  [HKEY_CLASSES_ROOT\exefile\shell\runas]

  [HKEY_CLASSES_ROOT\exefile\shell\runas\command]
  @="\"%1\" %*"
  ""IsolatedCommand"="\"%1\" %. "

  [HKEY_CLASSES_ROOT\exefile\shellex]

  [HKEY_CLASSES_ROOT\exefile\shellex\DropHandler]
  @= "{86C86720-42A0-1069-A2E8-08002B30309D}".

  [- HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe\UserChoice]

  --------------------------------------------------------------
  DO NOT COPY THE LINES

  If necessary:

  Check the fix of exe here
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  Also check this one if it applies
  http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  I hope this helps.

• Hi I would like th different creative cloud buy 2, only photoshop/lightroom one and the other with all pack.is it is possible because I saw that we can only install on 2 different computers at the same time

  Hi I would like th different creative cloud buy 2, only photoshop/lightroom one and the other with all pack.is it is possible because I saw that we can only install on 2 different computers at the same time

  Creative desktop cloud applications can be downloaded and installed on multiple computers, regardless of the operating system. However, the activation is limited to two machines per individual related to the composition, and you may not use the software on these devices simultaneously.

  You can also see:

  FAQ: Can I install Creative Cloud on several computers?

  You can either sign of Creative cloud on a computer to connect to another, or as you said, buy a membership second using an AdobeID different so that you can leave, signed at on 4 computers.

• I get a Script Error failed. I think it is because the domain name is on page 1 and the field with the calculation is on page 2.

  I get a Script Error failed. I think it is because the domain name is on page 1 and the field with the calculation is on page 2.

  The formula is just + Cash.  I don't know how to tell him to look on Page 1.  If I use the same domain on Page 1, the formula works so I know that this is not something in the name of the field.

  

  It received NO response

  Page1.cash should do it. If not, you can use CTRL + click to enter its name in your script.

  1. Select the field that you add the script.
  2. Scroll the design view until you can see the object whose name you need. (Is not necessary if the object is already in mode)
  3. Click inside the script window to place the cursor where you want the name of the other object.
  4. Hold down the CTRL key while clicking the object whose name you need.

• My client wants ot edit photos and text on its Web site. the site will not be hosted by BusinessCatalyst. Is it possible, and it is possible for me to synchronize the changes with my data?

  My client wants ot edit photos and text on its Web site. the site will not be hosted by BusinessCatalyst. Is it possible, and it is possible for me to synchronize the changes with my data?

  Hello

  Update June 2014 to Muse allows In-Browser editing for Muse sites hosted with third-party providers (not Adobe).

  See https://helpx.adobe.com/muse/using/whats-new.html#In-browser%20Editing%20enhancements for more details.

  Abhishek

• Measurement of voltage and the voltage with CompactDAQ display?

  OK, I just got my CompactDAQ hooked up with two modules (9225, 9239) and am able to simple single-phase voltage (120 VAC)... I connected an indicator, and it gives me shooting random sine wave values and what I'm looking for a simple voltage reading.  MAX and the DAQ assistant both work very well to the configuration task and I can see the signal in there.

  I dug through the DAQmx, watched functions in the knowledge base and have searched here without any real results.  I also downloaded the EPM resource kit, but it's tools for further on the road...  It seems to me that this should be simple crazy, but maybe I go too hard or just looking is not in the right place?  I would greatly appreciate a point in the right direction!

  Thank you!

  Chad

  With the help of... Windows XP (SP3), LabVIEW 2009, cDAQ-9174, 9225, 9239.

  Chad,

  When you say "simple voltage readout" are you referring to the effective voltage of the AC signal?  If Yes, you can use the Express VI 'Amplitude and level measures' to calculate the desired value.

  

  Hope this helps, otherwise if specify you what you are looking for a little I will try again.

  ~ SimonH

• Temperature measurement and the CJC using thermocouples on a USB - 6229 BNC

  Hello

  I'm trying to get the measurements of temperature using type K thermocouples on the box nor usb-6229 BNC. SignalExpress software doesn't let me choose 'Built In' to the Source of the CJC. So, I must select 'Constant', which means that I then have to follow the evolution of the temperature during the day with a separate meter and adjust the value of CJC accordingly to maintain an accurate reading. Is there a way around that to avoid having to monitor the room temperature at the junction?

  Thanks in advance

  Mike

  Hi Mike,.

  It seems that you have managed to find a solution for you have this problem, which is great news.

  However, for future use, if you had bought the 6229 with massive ending (rather than the interface BNC) then you might have interfaced unit with a block of connection SCB-68 (see link)

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/1180

  The SCB-68 has a CYC source built-in, so you might have used in conjunction with 6229 (mass layoffs).

  A bit of in the way, but I thought you may be interested.

  Best wishes to you all

• Measure the resistance with PXI DMM 4072 on different frequencies

  Hi all

  I tried to get on board various and unable to find solutions for that. I'm trying to measure resistance using NI PXI-4072 on frequencey 1 kHz, but not luck. When I try to use Agilent LCR meter I see the correct value of the resistance.

  I've seen a few posts on this but don't have no satisfactory solutions.

  http://forums.NI.com/T5/Digital-Multimeters-DMMs-and/LCRmeter-test-frequency-for-resistance-measurem...

  In above post, someone said that I can use 4072 DMM OR digitizer, does not have a lot.

  Can someone please provide the right path for me to solve this problem.

  Thank you

  Hello Puneet_K,

  I checked the data sheet and the method of measurement described in the specifications of the NI 4070/4072 http://www.ni.com/pdf/manuals/371304g.pdf; indicates that the ability is measured using an alternating signal and select the test frequency range, for example 3 kHz, 1kH or 91 Hz. The resistance is simply measured using a DC signal, and it is often sufficient to measure the internal resistance of a battery. If you need a more flexible control for the measurement, you probably get a card like the function generator and then set a multimeter to measure the voltage and another DMM to measure the current and calculate the impedance of these values.

  I hope this helps!

  Kind regards

  -Natalia

• Selection of scene and the PS3 with XBR65X900A

  Just upgraded my PS3 firmware and now when I select using my TV remote and sync Bravo it controls sensors to 'Photo select scene' and I hear no image, just my PS3. When I go to contol - Options - select scene TV, the only option I have is the picture. All other selections are grayed out. My PS4 works correctly, as does my FMP - X 1 and DirectTV Saturday.

  PS3 using HDMI 3 input

  PS4 using input HDMI 3

  DirectTv via HDMI 1 input

  FPM using input 4 HDMI

  PS3 and PS4 HDMI signal transmitted through Sony receiver.

  Any ideas?

  Thank you

  Bob

  Update:

  Not swapped the rec HDMI cable Sam passes to 1 HDMI XBR still no picture and the stage select switches to Photo, all others grayed. Different cable entry not using different HDMI does not Barvo Sync. Result I can't get no picture from my PS3 to my XBR65X900A. Worked before the upgrade of the PS3 this morning...

  OK, I found the solution... Press and hold the power button on PS3 for about 10 seconds. You will hear a beep and a Setup program appears to set up the HDMI cable. Instuctions to follow and which will give you the video output to your HDMI cable.

  Sorry for the confusion but, I thought that it was a function of the XBR65X900 while I posted here. Maybe this will help someone else.

  Bob

• What is the difference between a graphics card of GEForce with ddr3 and the other with ddr5 and are they

  HP Pavilion Elite 590uk with windows 7 64 bit.

  What is the main difference between the GEForce GT420 installed and the GTS450.

  I know the 429 is DDR3 and the 450 is DDR5 what - what, can I replace the 420 to 450 and how do I

  Hello

  There is a large performance difference and energy consumption.  Look at this comparison.

  The 420 is a narrow card requiring only a single slot where the 450 is a map more wide which will cover the next adjacent location.  Look at the diagram for the motherboard of your PC. The GTS 450 requires a PCI-E power connector 6 pins provide the extra power for the card.

  Open your PC and a few measurement in parallel with the PCI-E x 16 slot to see how long of a video card will fit. The adjacent slot on the PCI-E x 16 slot must be vacant.  Look for a PCI-E power connector 6-pin.

  ' HP ' how-to ' articles should be useful.

• Measurement of the hysteresis with metal plate

  Hi all. I have the task of understanding. I want to measure the hysteresis of elastic coupling. To the couple measure I two strain gages on 90 degrees (NI 9237 bridge half, II). After calculation, I now have the couple. In the other hand I measure angle of rotation of the motor with a metal plate with 52 teeth (gear). Angle of rotation I use input digital OR 9401. Hysteresis of bild, now I must on each tooth torque couted. I tried the example Multi - multifunction - Ctr Retrigg a generation sample clock Pulse Train HAVE but still graf give me the straight line. Can someone help me with this? Are there more better example for me, or clips in internet to show me how to do? Thanks before.

  This is this case, the problem may be, the data acquisition card cannot rearm the fast enough triger either acquisition takes too long.

  In the configuration of the screenshot I see you want to acquire 100 samples at 1 kHz. This means that each acquisition will be at least 100ms which might be too long for your application. NEITHER 9237 supports a maximum rate of 50 kHz, so my first sugestion would be to simply increase the sampling rate and see if it helps.

• Measurement of the temperature with the PCI-6229

  I was announced in an old thread and do not receive and answer, so I thought I try a new.

  Link to the old thread: http://forums.ni.com/ni/board/message?board.id=250&thread.id=14920&view=by_date_ascending&page=1

  I'm trying to measure temperatures using thermocouples using the PCI-6229 and I use two SBC-68LPR to make the connection.  They are not reference on them joints.

  After moving down from enugh to careful reading of the old thread I mentioned above and I think I knew what I should do.  Here's what I do now:

  Create a task - DAQmxCreateTask

  Create a channel for this task - DAQmxCreateAIThrmstrChanVex thermistor

  Create a number of channels of thermocouple for this task (DAQmxCreateAIThrmcplChan) using the cjcsource DAQmx_Val_Chan option and specifying the string thermistor as the source channel

  Start this task - DAQmxStartTask

  Get the temperatures - DAQmxReadAnalogF64

  Stop the task - DAQmxStopTask

  Disable the task - DAQmxClearTask

  I have not yet hooked, but I doubt that it is the cause of the error.

  A few more details (pardon my Delphi):

  Create the channel of the thermistor

  TmPcName: = ' Dev1/IA.19 ";

  Secret: = DAQmxCreateAIThrmstrChanVex)
  TcTaskHandle, / / task handle
  @TmPcName, / / physical channel name
  @TmChName, / / name of channel
  -80,                                   // Min range
  80,                                    // Max range
  DAQmx_Val_DegC, / / units, ° C
  DAQmx_Val_ResistanceConfiguration_4Wire, / / 2-wire, 4-wire, etc.
  DAQmx_Val_ExcitationSource_External, / / source of excitement, external
  1, / / value of excitement
  9.376e-4,                         // a
  2.208e-4,                         // b
  1.276e-7,                         // c
  30000);                            Resistance of reference

  Creation of the channel of thermocouple:

  TcPcName: = ' Dev1/ai23;

  Secret: = DAQmxCreateAIThrmcplChan)
  TcTaskHandle, / / task handle
  @TcPcName, / / physical channel name
  '',                                     // Channel name
  0,                                    // Min range
  1000, / / Max range
  DAQmx_Val_DegC, / / units
  DAQmx_Val_DegC, / / type of Thermocouple
  DAQmx_Val_Chan, / / source CJC
  25, / / value of CYC, so DAQxm_Val_ConstVal
  @TmPcName);             CJC channel, so DAQxm_Val_Chan

  It looks like 4 scales is required for voltage excitement thermistor measurements.

  In addition, it seems that external excitation is necessary in my case, PCI-6229.

  Everything works if I use a CJCConstant.  When I do this I use the same code to create channels of thermocouple, but I spend creating the channel of the thermistor.  When I try to use a CJCChannel I get an error saying "value required is not supported for this property value," which occurs when I call DAQmxStartTask.  I don't have no idea of what this message refers to and the best I can tell the properties that I've specified sense.  The constant termistor are from actual thermistor, that I found on travailleursduweb.com.

  I could also use some help to know how to connect the thermistor.  Looks like I need to fab, a thermistor circuit myself, with a stable voltage to power the termistor and use a double-ended analog and reference to the channel.

  Thank you

  Mike

  The error of thermocouple type was a type-o in the post.   Thanks for catching it.

  I think I found the problem.

  I wrote a small program to test for Thermistors and I went to using the routine exctation of tension for a common routine of excitement (... IEX instead of... Vex).  I had been by specifying a minimum value less than 0.  I changed it from-80 to 0, and it works now.  However, I got an error in division by zero, intermittently, when you read a thermistor channel.  The error is not in my code.  It occurs when you call DAQmxReadAnalogF64 for the first time and I'm not all mathematical related to this call.  I'm still looking into it.