Basic question - graphic legends in the heads side

Hey,.

Hooray, my company eventually got Framemaker, and I am now in charge of the control of FM and fall all our old content FM. I'll use it to create our manual of the product.

Anyway, what I do is align text in the heads side with graphs in the main text column. As follows, from the old manual:

text_in_sidehead.jpg

So far, I tried to create a paragraph tag that sets the text in the head to one side. It works, but I can't align the text of the head to one side with the chart. (The paragraph Designer options seem to allow only aligning the text side-head with other paragraphs, no graphics).

So, given that our manual is full of graphs that need aligned beside text, what is the best approach?


Thank you very much. I know it's a very basic question.

Ian

A fairly standard practice with framework is to create a paragraph tag that is used only as a part of positioning to hang frames anchored (with images) and tables. The font size is usually set to something like 2 or 4 points, so that it fits in the documents without adding white space. And he never actually wears text.

So if you create an anchor tag and anchor your chart it, you should have a tag to align a sidehead against.

However, if it was me, I probably hang a picture two-column a row of my anchor tag and the graphics of the pop in a cell and a legend in the second.

See you soon,.

Art

Tags: Adobe FrameMaker

Similar Questions

  • Another room for the heads side on different Master Pages?

    I prepare an updated book existing with about 40 chapters, and I added a head aside to add graphic markers in the margins.  I took a chapter, went to the page master and enlarged the flow of the text.  Then, I went to Format | PageLayout. ColumnLayout and clicked on "room for side heads.  I then imported the layouts and the properties of the Document (to pick up the room for the heads side) in the other chapters.  For the main text flows on the 'left' and 'Right' template, it works very well.

    However, it is ruin the flow of the text on the page 'First' master, that I use for my chapters.  Strangely, the head side seems correct, but the left margin moves in 1.75 ".   If I click on the first page and turn to the "House of Chiefs side" off, then turned it off it for the entire document.  Here's a screenshot:

    Before.JPG

    And here's after:

    After.JPG

    Any suggestions on how to fix this?

    Thank you!!!

    John

    www.controlgeek.NET

    Ah, you put me on the right track - I had to change my "Chapter title" paragraph format to "through all of the Collins and side heads" and that fixed it.

    Thank you!

    John

    www.controlgeek.NET

  • 'Room for the heads side' on the Master Pages does not not on body pages.

    In a new document, I created master pages, each with a text frame type of the "model for Page body text, frame 'each with the same tag stream."

    For each block of text, I enabled property of "heads of Lounge next door.

    When I apply master pages to the body of the document (Format > Page Layout > Master Page use > Use Master Page: > Apply), the property of "heads of salon for side" disappears.

    Does anyone know why my text frames do not follow the format of applied master page?

    I use Framemaker 11.

    > For each block of text, I enabled property of "heads of Lounge next door.

    If I remember a recent discussion, you must enable that via:

    Format > Page layout > column layout

    [*] The heads side room

    and it is a document, not just for chosen setting the Master Pages.

  • Question of inclusions on the server side

    I preface this in saying that I've never used a server-side include, but thinking of it based on a proposal of a thread yesterday.

    If I created an include file server containing only side my bar banner/nav title and placed this file at the top of each of my pages, would then possible to have content (Flash, in this case) of an editable region in a display of file based on a template of banner? Can they overlap, I guess that's what I'm asking.

    Thank you - JAY

    In fact, the inclusion does not have to be in an editable.

    Just be sure that the include file contains no head or body tags. All you want in the file is the exact code you pulled out of the original page.

    I use files ssi to display my page headers and menus for all pages. In this way, if I need to add a menu item, I did not upgrade to update hundreds of pages. I just update the ssi file and changes throughout the site. I use also files ssi for advertising that appears in the sidebars of some sites, in which case change advertisers and author text, so I can update the date of copyright easily each year.

    On a site I built, every page of the site is built entirely in the ssi files, with the only difference being that the ssi file is called in the content area is different for each page. Unskilled typists enter data in files that are called in the content area, without having any access to the web server. New content is delivered, a new web page requires only a change to a single line to the basic page - the include statement in the content area.

    SSI is neat.

    John

  • How can I disable the graphic legend to the user text entry?

    Dear friends!

    I need your help in the following case.

    My front panel has a chart whose legend path is visible. I have display programmatically inside the runtime text, according to the article that the user selects in a control of the ring. The problem is that the user can also enter text (running) in the same area. Is there a way to prevent the user to text entry in the legend tracing running text box? I need the chart and the legend of tracing enabled at run time. Please suggest solutions.

    Thank you very much!

    Have a nice day!

    Try to put a picture control on the top of the chart legend and when the user tries to click on the name of plot, it avoids text entry

    You may also toggle the visible property of the image control to allow text in admin mode

  • A very basic question dialogue IRT and the message boxes...

    What is the difference between a dialog box and in a message box?

    What the heck is a palette window?
    I'm quite confused...

    I'm quite confused...

    Need a glossary?

    http://msdn.Microsoft.com/en-us/library/Windows/desktop/aa511441.aspx

    (BING search engine for)
    WINDOWS glossary dialogue addressed
    )

    HTH

    Robert Aldwinckle
    ---

  • kind of basic question on navigation of the sequence

    then I got a new job and worked with Avid Newscutter there. not much fan of passionate, but there is a feature that has been sloppy. When you hold down the control and right mouse and browse your sequence, difficult playhead stops at each edit point. is it possible to imitate this behavior in first? I know that I can just press up and down to scroll edit them points, but sometimes it is not practical, according to what I do.  Thank you.

    Up and down is the only way I know how.

  • Basic question on redundancy as the retention policy enforcement

    DB version: 11 g

    I intend to implement a differential incremental backup of my database. My strategy is
    Sunday -->     Level 0 backup
    Monday -->     Level 1 backup
    Tuesday-->     Level 1 backup
    Wednesday-->     Level 1 backup
    Thursday-->     Level 1 backup
    Friday-->     Level 1 backup
    Saturday-->      Level 1 backup
    
    Again, the new weekly backup cycle starts
    Sunday -->     Level 0 backup
    Monday -->     Level 1 backup
    .
    .
    Set on the Recovery window retention policy
    ==========================

    I understand that recovery window retention policy: If I set up
    'CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;' 
    This means only these backups that are older than 7 days will be reported as obsolete when executing the command "remove obsolete.

    Retention set on redundancy policy
    =============================

    But I'm a little confused about the retention set to redundancy policy:

    Does
    CONFIGURE RETENTION POLICY TO REDUNDANCY 3;
    say that you keep 3 copies of backups on different locations on disk? How does this fit with my above mentioned incremental backup strategy?

    REDUNDANCY is 'Keep' copies

    The BACKUP is 'Create' copies of

    Copies which exceed the requirement of REDUNDANCY become OBSOLETE.

    Hemant K Collette

  • Definition of the surface of the mushroom side in FrameMaker 2015

    The properties of the object dialog box has changed significantly in 2015 from FrameMaker. It seems that you must specify the heads side through the designer of model object and then assign this style for the text block.  Is this true?

    So I set the heads side using graphics > designer object model. I selected my head sideways style in the object's properties dialog box, and click Save. The heads side have not been added. Nothing has changed on the page.

    Does anyone know how to add the heads side in 2015 from FrameMaker?

    Same as always:

    (1) format > Page layout > column layout...

    2) click the box of the room to the heads side at the top left and fill in the desired properties of width, Gap and side

    3) click update all of the flow



    It is an entire document, stream property, so you shouldn't really go through the object Designer.

  • Question to hop in the Time Machine - Illustrator 10.

    Good guys, here's my problem.  I have a mac with Photoshop elements.  I design t-shirts for my local gym.  They just sign a contract with a small MOM and pop screen hosting. As a result, they have all saved as an Illustrator EPS, version 10 file or several.  She couldn't use my photoshop eps files.

    She is my questions.

    1. If I buy a 'new' Illustrator 10 from Amazon it will install on my mac 10.5 version or my computer is too new for this program?

    2. If it settles, can I open the PSD in Photoshop elements files in illustrator 10 and save as illustrator EPS files?

    I don't know anything about Illustrator, but I'll dive in as soon as I get it.  I really just need to open the PSD and convert it using Illustrator 10.  They need the vector files.  I just need these questions answered before you buy the program.  Thank you

    function() {return A.apply (null, [this] .concat ($A (arguments)))}

    Good guys, here's my problem.

    Well, Jimi. Here are your answers...

    function() {return A.apply (null, [this] .concat ($A (arguments)))}

    I have a mac with Photoshop elements.  I design t-shirts for my local gym.

    If you're talking about the design of T-Shirts involving multiple colors, you really should be using a program (whether raster or vector) able to print color separations. You can do with what you use, but you will need to work in black and white only.

    function() {return A.apply (null, [this] .concat ($A (arguments)))}

    They just sign a contract with a small MOM and pop screen hosting.

    Basic questions to ask at the shop of the screen:

    • What do you use for your "film positive" with which you expose your screens? (Ex: impressions laser on vellum translucent or clear acetate; litho real films shot on a device of original thought... process)
    • Can you maintain screens tint or halftone; or are you limited to the art of the line?
    • If you can print the tintscreens or the halftone, what is the ruling of maximum line you can hold?

    function() {return A.apply (null, [this] .concat ($A (arguments)))}

    As a result, they have all saved as an Illustrator EPS, version 10 file or several.

    Why? Assuming that they are printing their originals, they should be able to print from a PDF of the color separation.

    function() {return A.apply (null, [this] .concat ($A (arguments)))}

    She couldn't use my photoshop eps files.

    EPS is encapsulated PostScript. It must be a PostScript to EPS printer print correctly. PDF can be printed both PostScript and non-PostScript devices, frequent at MOM & filter anti-pop stores.

    function() {return A.apply (null, [this] .concat ($A (arguments)))}

    1. If I buy a 'new' Illustrator 10 from Amazon it will install on my mac 10.5 version or my computer is too new for this program?

    You don't need the old version. Current version can back - record formats inherited version. It is usually false economy to go around buying obsolete software.

    function() {return A.apply (null, [this] .concat ($A (arguments)))}

    2. If it settles, can I open the PSD in Photoshop elements files in illustrator 10 and save as illustrator EPS files?

    You can open an EPS with Illustrator file (pretty well regardless of what program exported EPS). But that doesn't automatically make the needs of the shop of the screen. Forget the EPS. It is the nature of the content that matters.

    EPS is a metadata format. Think it's just a "warpper" or a "black box" that can hold different types of data objects which are understood by a PostScript device.

    For example: assume that your work is an RGB of halftone image you built in Photoshop and then exported in EPS file. Open the EPS in Illustrator and then give to the shop of the screen is not accomplish anything. After opening in Illustrator, you then just a native Illustrator file that contains a RGB raster image. How would he a difference whatsoever, as to whether the screen shop can print it?

    function() {return A.apply (null, [this] .concat ($A (arguments)))}

    I don't know anything about Illustrator, but I'll dive in as soon as I get it.

    Modern.

    function() {return A.apply (null, [this] .concat ($A (arguments)))}

    I really just need to open the PSD and convert it using Illustrator 10.

    No, you haven't. See above.

    function() {return A.apply (null, [this] .concat ($A (arguments)))}

    They need the vector files.

    Big misconceptions:

    • Simply open a file (regardless of format) in Illustrator is not magically that he "vector".
    • Being fully vector is not magically, ensure that it the limitations of repro of MOM & filter anti-pop stores.
    • Most of the MOM & pop screenshots are not really limited to work with vector illustrations; they just think they are.

    Screen mom & pop stores very often say 'We need vector illustrations' when in fact what they really mean is "We need line art."

    It's really very simple:

    Denominator common for shops to screen mom & pop requirements is as follows: a single image of art of black line for each color used in the design. That's all. They are going to take a copy of this solid black image, printed on a transparent or translucent medium at least and it can block light that will expose a screen. They do it separately for each ink (color) will be printed on the shirt.

    Line drawing means "without tone." In other words, nothing which prints as a screen of dots as a screen tint or a semitone. In other words, no detail too small to be taken in charge by the mesh of the physical screen.

    Line drawing can be created with both raster and vector programs. You can 'paint' a raster image that will print as art of the black solid line in Photoshop just as easily as you can 'draw' traced that will print as black line art continues in Illustrator.

    No matter whether you are creating the linework in Photoshop or Illustrator (or more any other mainstream graphics program), you can save it as a PDF ready to print. This PDF can be opened and printed by the shop of MOM & pop screen using nothing more than the free software Adobe Reader.

    But the content of this PDF (e.g.: the art of the black line continues; a page by ink) is up to you to create properly. This requires only to understand the fundamentals of color separation and the creation of your work accordingly.

    JET

  • Next to the heads - can't change size

    Hello ,.

    W7, FM11.

    I think I might do something fundementally wrong, but I can't change the size of a side.

    I have already completed the document and you can add a head by Format > Page layout > column... layout and verification of the rooms to the heads side.

    However, no matter what I change the width , it always stays the same size.

    What I am doing wrong?

    >... cannot turn a head to one side on and off the body of a document that uses the same master page?

    I never use SH, but just play with it a little, it behaves, uh, unexpected ways.

    I would have suggested creating members 'Left.SH' and 'Right.SH' that would be used by the templates apply each time that a paragraph tag, say, 'Sidehead' has been used. Does not work.

    Conversely, allowing left to be implemented to create pages Left.Normal and Right.Normal , and SH to be AMP-mapped by paratags with, say, the names of ".norm", does not either.

    What works is to let the pages be SH and creation of the name ".ash": paragraph formats

    The paragraph designer > Tag [Body.ash]
    Properties: Pagination
    [*] The set of columns and side head

    (as long as you don't need multiple columns)

  • lost heads side after importation

    I cleaned a model of low complicated, that I inherited using a very clean template generic and import items I'll actually use.


    I'm pretty well done, but in the new model all paragraphs are -aligned head margin on the left side. Paragraph tag settings are identical (through all the columns and heads aside or column, as appropriate), that are the parameters of the framework text (room for the heads side checked, width. 75 ", gap. 25", on the left side).


    In the old version, I can see the side head rules the two pages of body and on master pages. In the new version, I see them only the master pages.


    FrameMaker unstructured 10. A few troubleshooting tips?

    Sideheads is a stream property (effectively a level paper, not of individual text frame property). If they have been enabled in the MasterPage, but not displayed on the pages of body, then the body pages had a substitution (i.e. it was off it).

  • Basic question on the client connection to the Fund with several oracle instance

    Oracle 11:

    I have just a basic question about how doing listener/customer determine how oracle instance to connect to:

    1 tnsnames.ora and listener defines the configuration of the host and the port is that how he comes to know? I'm just trying to understand if the request comes to the listener how listener knows what Oracle instance to route traffic to?

    2. when I do sqlplus / as sysdba how knows what Oracle instance to connect to?

    Look at the differences

    [oracle@srv01-18-102 trace]$ cat $ORACLE_HOME/network/admin/listener.ora
    
    cat: /u01/app/oracle/product/ 11.1.0/dbhome_1/network/admin/listener.ora: No such file or directory
    
    -- start listener
    
    [oracle@srv01-18-102 trace]$ lsnrctl start
    
    LSNRCTL for Linux: Version 11.1.0.7.0   on 09-JUN-2009 01:05:42
    
    Copyright (c) 1991, 2009, Oracle.  All rights reserved.
    
    Starting /u01/app/oracle/product/ 11.1.0/dbhome_1/bin/tnslsnr: please wait...
    
    TNSLSNR for Linux: Version 11.1.0.7.0
    Log messages written to /u01/app/oracle/diag/tnslsnr/srv01-18-102/listener/alert/log.xml
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=srv01-18-102.amis.local)(PORT=1521)))
    
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    ------------------------
    Alias                     LISTENER
    Version                   TNSLSNR for Linux: Version 11.1.0.7.0
    Start Date                09-JUN-2009 01:05:42
    Uptime                    0 days 0 hr. 0 min. 0 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Log File         /u01/app/oracle/diag/tnslsnr/srv01-18-102/listener/alert/log.xml
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=srv01-18-102.amis.local)(PORT=1521)))
    The listener supports no services
    The command completed successfully
    
    -- startup database
    
    SQL> shutdown immediate
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    
    SQL> startup
    ORACLE instance started.
    
    Total System Global Area  849530880 bytes
    Fixed Size                  1346664 bytes
    Variable Size             725615512 bytes
    Database Buffers          117440512 bytes
    Redo Buffers                5128192 bytes
    Database mounted.
    Database opened.
    
    SQL> alter system register;
    
    System altered.
    
    -- check again after a while (or for registration via "alter system register")
    
    [oracle@srv01-18-102 trace]$ lsnrctl status
    
    LSNRCTL for Linux: Version 11.1.0.7.0    on 09-JUN-2009 01:05:50
    
    Copyright (c) 1991, 2009, Oracle.  All rights reserved.
    
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    ------------------------
    Alias                     LISTENER
    Version                   TNSLSNR for Linux: Version 11.1.0.7.0
    Start Date                09-JUN-2009 01:05:42
    Uptime                    0 days 0 hr. 0 min. 8 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Log File         /u01/app/oracle/diag/tnslsnr/srv01-18-102/listener/alert/log.xml
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=srv01-18-102.amis.local)(PORT=1521)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=srv01-18-102.amis.local)(PORT=8080))(Presentation=HTTP)(Session=RAW))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=srv01-18-102.amis.local)(PORT=2100))(Presentation=FTP)(Session=RAW))
    Services Summary...
    Service "DEMO" has 1 instance(s).
      Instance "DEMO", status READY, has 1 handler(s) for this service...
    Service "DEMOXDB" has 1 instance(s).
      Instance "DEMO", status READY, has 1 handler(s) for this service...
    The command completed successfully
    
    -- BEQUEATH
    
    SQL> host
    [oracle@srv01-18-102 ~]$ set ORACLE_SID=DEMO
    [oracle@srv01-18-102 ~]$ sqlplus / as sysdba
    
    SQL*Plus: Release 11.1.0.7.0   on Tue Jun 9 01:17:42 2009
    
    Copyright (c) 1982, 2009, Oracle.  All rights reserved.
    
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.1.0.7.0
    With the Partitioning, Oracle Label Security, OLAP, Data Mining,
    Oracle Database Vault and Real Application Testing options
    
    -- Query V$PROCESS
    
    SQL> desc v$process
    
     Name                                      Null?    Type
     ----------------------------------------- -------- ----------------------------
     ADDR                                               RAW(4)
     PID                                                NUMBER
     SPID                                               VARCHAR2(24)   <---
     USERNAME                                           VARCHAR2(15)
     SERIAL#                                            NUMBER
     TERMINAL                                           VARCHAR2(30)
     PROGRAM                                            VARCHAR2(48)
     TRACEID                                            VARCHAR2(255)
     TRACEFILE                                          VARCHAR2(513)
     BACKGROUND                                         VARCHAR2(1)
     LATCHWAIT                                          VARCHAR2(8)
     LATCHSPIN                                          VARCHAR2(8)
     PGA_USED_MEM                                       NUMBER
     PGA_ALLOC_MEM                                      NUMBER
     PGA_FREEABLE_MEM                                   NUMBER
     PGA_MAX_MEM                                        NUMBER
    
    SQL> select * from v$process where program like '%(TNS V1-V3)%';
    
    52ACC7FC         19 26000                    oracle                   2
    UNKNOWN                        [email protected] (TNS V1-V3)
    
    /u01/app/oracle/diag/rdbms/DEMO/DEMO/trace/DEMO_ora_26000.trc
                                                               1286124       2699092
             1048576     4616664
    
    1 row selected.
    
    -- "Jump to OS"
    
    SQL> host ps -ef|grep 26000
    
    oracle   26000 14346  0 01:09 ?        00:00:01 oracleDEMO (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
    oracle   27040 14346  0 01:16 pts/1    00:00:00 /bin/bash -c  ps -ef|grep 26000
    oracle   27042 27040  0 01:16 pts/1    00:00:00 grep 26000
    
    -- Connect via listener to the database
    
    -- content off tnsnames.ora
    
    [oracle@srv01-18-102 trace]$ cat $ORACLE_HOME/network/admin/tnsnames.ora
    # tnsnames.ora Network Configuration File: /u01/app/oracle/product/ 11.1.0/dbhome_1/network/admin/tnsnames.ora
    # Generated by Oracle configuration tools.
    
    DEMO =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = srv01-18-102.amis.local)(PORT = 1521))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = DEMO)
        )
      )
    
    [oracle@srv01-18-102 ~]$ sqlplus otn/otn@DEMO
    
    SQL*Plus: Release 11.1.0.7.0   on Tue Jun 9 01:28:52 2009
    
    Copyright (c) 1982, 2009, Oracle.  All rights reserved.
    
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.1.0.7.0
    With the Partitioning, Oracle Label Security, OLAP, Data Mining,
    Oracle Database Vault and Real Application Testing options
    
    SQL> set head off feed on
    
    SQL> desc v$process
    
     Name                                      Null?    Type
     ----------------------------------------- -------- ----------------------------
     ADDR                                               RAW(4)
     PID                                                NUMBER
     SPID                                               VARCHAR2(24)   <---
     USERNAME                                           VARCHAR2(15)
     SERIAL#                                            NUMBER
     TERMINAL                                           VARCHAR2(30)
     PROGRAM                                            VARCHAR2(48)
     TRACEID                                            VARCHAR2(255)
     TRACEFILE                                          VARCHAR2(513)
     BACKGROUND                                         VARCHAR2(1)
     LATCHWAIT                                          VARCHAR2(8)
     LATCHSPIN                                          VARCHAR2(8)
     PGA_USED_MEM                                       NUMBER
     PGA_ALLOC_MEM                                      NUMBER
     PGA_FREEABLE_MEM                                   NUMBER
     PGA_MAX_MEM                                        NUMBER
    
    SQL> select * from v$process where spid in (27372);
    
    52ACC7FC         19 27372                    oracle                   4
    UNKNOWN                        [email protected]
    
    /u01/app/oracle/diag/rdbms/DEMO/DEMO/trace/DEMO_ora_27372.trc
                                                                705064        938372
                   0      938372
    
    -- Use info off v$process to join with v$session
    
    SQL> select * from v$session where paddr = '52ACC7FC';
    
    52112690        170          9     107441 52ACC7FC         93
    OTN                                     3 2147483644
                             ACTIVE   DEDICATED         93
    OTN                            oracle
    27370
    srv01-18-102.amis.local
    pts/1                          [email protected] (TNS V1-V3)
    USER       4C83D838     1817844678 4qpuh5jq5n6y6                0
    09-JUN-09             16777216 4C83443C      1421292656 b1vt3u9abfd3h
                    0 09-JUN-09              16777216
    
    SQL*Plus                                          3669949024
                                               0
    
                    8244            -1              0               0             0
    09-JUN-09                     0 NO  NONE          NONE       NO
    OTHER_GROUPS                     DISABLED ENABLED  ENABLED
                         0
                                                                     NOT IN WAIT
                                               41        322
    SQL*Net message to client
    driver id                                                        1413697536
    0000000054435000
    #bytes                                                                    1
    0000000000000001
                                                                              0
    
    00                  2000153315           7
    Network                                                                  -1
                  0 WAITED SHORT TIME                14
                          3730
    DEMO                                                            DISABLED FALSE
    FALSE FIRST EXEC                100 52ACC7FC               4
    
    -- Use info off V$process to look pid on OS
    
    SQL> host ps -ef | grep 27372
    
    oracle   27372     1  0 01:30 ?        00:00:00 oracleDEMO (LOCAL=NO)
    oracle   27413 27380  0 01:30 pts/1    00:00:00 /bin/bash -c  ps -ef|grep 27372
    oracle   27415 27413  0 01:30 pts/1    00:00:00 grep 27372
    
  • Can anyone help please? I think of web page has changed all of a sudden. Everything is listed on the left side of the screen and appears to be in a basic format.

    Can anyone help please? I think of web page has changed all of a sudden. Everything is listed on the left side of the screen and appears to be in a basic format. I run XP and use Firefox 9.0.1.
    Thank you...

    Clear the cache and cookies from sites that cause problems.

    "Clear the Cache":

    • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Tools > Options > privacy > Cookies: "show the Cookies".

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Set the name of a Visible plot and color lines draw graphic legend of XY

    Hi all

    Updated 20 plots data on that and I'm initializing the XY graph with 20 plots.

    After update of data, I do draw 3 to invisible, now I need to trace the legend to organize such that he should have, plot 0, plot1, plot2, plot4, plot 5... plot19, in the legend of his plot and should not have Plot3.

    So while graphic print and consult the chart in pdf format, I can see field only for Visible names draw in the legend of the plot and can avoid the confusion of having plot3 in my graphic impression. (Given that this parcel is invisible and data used pot in chart 3 and so I do not have this as my as well catalogue)

    Is there are ways of achieving them, please send your suggestions.

    Thank you

    Stéphane

    You can set the colors of the plot, point style, etc. by program like I did with the name of the parcel. The colors are just an extension of the notion that I have used with the array of names.

Maybe you are looking for

  • No MS Publisher in Microsoft Office 2013

    Hello I installed Microsoft Office the preinstallation and the key that was given to me when I bought the computer. After this installation, attended only the following applications:Excel 2013, One notes 2013, 2013 PowerPoint, Word 2013. Editor is th

  • Can I install an EVO of 850 Samsung 500 GB SSD in my MBP 2011 13 '?

    Hello. I want to upgrade my MacBook Pro with an SSD, but I wonder if it would be compatible with my computer. I did a lot of research on the internet, trying to find out if I would be able to replace my drive HARD current standard with a Samsung SSD

  • Shared variable library deployment error

    Hello I'm having a problem with my variable shared library in the .exe deployment.  I installed my two individual computers to request one.  We my library is as it should be and on the other, I get an error message, as shown below: Here's the code th

  • L7680 JO is no longer on the network

    I have a L7680 all-in-One, since this model is released - I think about 10 years.  It's a great printer.  Suddenly, he "fell off" my network, and I can't put it back on. I use a wired Linksys Cisco network and the printer must receive its IP from the

  • If the Environment Variable in Vista

    How to change the Environment Variable in Vista? ... I could do with XP using Control Panel > performance and Maintenance, but could not find the area revealing in Vista.