Basic question on the monitoring of the slopes

WARNING: I am a logic pro x newbie.

I've set up an audio track:

No matter if the route of entry of surveillance is on or if it is enabled, the sound does not come out when the device is 'play' (i.e. I pressed the play button).

I would like to sound out so that I can practice parts and hear against the main device.  (If I press file rather than play, his fate against the main arrangement.)

I would also like to be able to record a track while another track is simply monitored. I use this during the recording of the complex vocal parts. I like to play the game with a hand on the piano while singing.

I understand there are solutions by always using the button 'record' and then removing the tracks. But this seems like a simple enough features that I think that it is probably a better way.

Thank you

Monitoring of entry

If you have an active Audio track only the follow-up entry button and not the record enable button, then you should hear the o of that Channel input Strip regardless you are in play or record Mode.

If you have the record enable button, then the behavior depends on the key 'Auto input Monitoring '. If active (recording ➤ Auto monitoring of entry), then the entry is muted during the recording Mode.

Play with keyboard

About reading as well as MIDI, while recording audio, you're right, you need to create a workaround and because it is not possible "out of the box.  To play your MIDI keyboard, you must select a software Instrument track. If you have active recording an Audio track for recording, then this software Instrument track is also recorded in the recording Mode.

Installation program:

Here's a pretty simple tip to have a dedicated software tool Track/Channel Strip which is always "playable (it requires a bit of knowledge of the environment):

  • In the environment, go to the layer 'click & Port '.
  • Create software Instrument Channel Strip and assign it to 255 Inst.
  • Load a Plugin Instrument (i.e. piano) on this channel strip
  • Drag an extra cable from the existing output of the object of "Entry Notes" to that Channel Strip object
  • (Optional) You can create a button object to control the Mute button of this channel strip. You can put this button on a separate layer of environment, make it a floating window and place convenient anywhere on your screen. You can even assign a button on your external MIDI keyboard to control this button so that you can play it "along keyboard' on and outside.

What you have done:

  • Any incoming MIDI signal is now sent "parallel" to this software Instrument Channel Strip (255).
  • If you have created a track for this channel strip, you can have displayed it in the mixer (or you select the button display the mixer 'All')
  • When you play your external MIDI keyboard, it will be routed to the Channel Strip and you can set the controls on that strip of Chanel
  • Whenever you need to hear this channel strip, just mute it.
  • Your external MIDI keyboard will still be routed to any selected track in the track area and its MIDI signals can be recorded as usual.

For more information on all procedures to record/monitor in logic or learn how to use the little custom environment configuration check my textbooks of logic in my series graphically improved manuals : "Logic Pro X - how it works" and «Logic Pro X - détails»

Hope that helps

Edgar Rothermich - LogicProGEM.com

(Author of "Graphically improved manuals")

http://DingDingMusic.com/manuals/

"I could receive some form of compensation, financial or otherwise, my recommendation or link."

Tags: Professional Applications

Similar Questions

  • Basic question on the configuration of the OVD

    Hi gurus
    I have a basic question about the configuration of the TPM. I have all the "employees" in Active Directory and 'Employees + external users' in OID. The employee user password is maintained in AD, while the same for the external user is maintained in OID.

    Query:
    I need to configure authentication for an application for the employees present in the AD and present external users in OID. I have to join the profiles of employees present in AD and OID. Even if the employees are present in the OID, I don't want to configure for authentication of the OAM.

    How can I implement this using OAM and OVD.

    I got your condition.

    You said that OID contains external users as well as employees. You manage a container separated for employees in OID. If so, you job would be easy. If there is no container separated for employees on the OID and storing all users (employees and external users) in the same container (default: cn = Users, dc = xxx, dc is com) then you can get the list of AD users only with the following ldapsearch command:

    ldapsearch h Pei d 'cn = sleep '' w sub s b '' 'objectclass = user' SamAccountName

    Create three adapters OVD:

    1 adapter used (this should point to Active Directory)

    2. users adapter (when creating this, you have to exclude users AD, just similar to find the above option).

    3 create the adapter to store as the clubs above two adapters.

    Now, OAM should talk to store adapter.

    I hope this helps.

    Thank you
    GK

    Published by: GK Goalla on October 3, 2012 12:34

  • Basic questions about the port of Vsphere mirror

    I set up a lightweight VM that would deal with inter-VM traffic. To do this, I want to activate the duplication of port between virtual machines.


    I have ESXi 5.5 Update 1 installed, use the Vsphere (no webclient) client. I see no duplication of port capacity on my Vsphere Client

    vsphere_esxi5.5_sc1.png

    I have some very basic questions:

    (1) all documentation I've read involving 'Port mirror' is done via web Vsphere client. Vsphere is provided with Vcenter (please, correct me if I'm wrong)

    (2) only functions with "Distributed Virtual Switch", not "switch vSphere Standard" port mirroring. How can I activate "Distributed Virtual Switch"? What products can I download/install and try (suppose I go to the user a license for 60 days)

    (3) exist what API to enable/disable/setup Port mirroring?

    (1) all documentation I've read involving 'Port mirror' is done via web Vsphere client. Vsphere is provided with Vcenter (please, correct me if I'm wrong)

    Because the mirror of port requires a distributed switch, you will need to vCenter Server and once in vCenter Server, you can the vSphere Web Client of the user or the vSphere Client (c# version).

    (2) only functions with "Distributed Virtual Switch", not "switch vSphere Standard" port mirroring. How can I activate "Distributed Virtual Switch"? What products can I download/install and try (suppose I go to the user a license for 60 days)

    You can download the server vCenter Server (60 day trial) and you'll have an Enterprise Plus version for your ESXi host vSphere.

    (3) exist what API to enable/disable/setup Port mirroring?

    Check the comments of this blog: http://blogs.vmware.com/vsphere/2013/01/vsphere-5-1-vds-feature-enhancements-port-mirroring-part-1.html

  • Very basic question :) in the forum

    :)

    I don't know her like a basic question, but struggling to get this straight all in detachment.
    I just wanted to know the steps to connect the text into a hyperlink when validating responses...

    If someone can solve the example: here_ "go-ahead" should be a hypertext link and the link should point to google.com

    See you soon,.
    Manik.

    Something like this:

    [url http://oracle.com] Oracle

    How to write on it?

    [url http://oracle.com]Oracle[/url]

  • Basic question on the client connection to the Fund with several oracle instance

    Oracle 11:

    I have just a basic question about how doing listener/customer determine how oracle instance to connect to:

    1 tnsnames.ora and listener defines the configuration of the host and the port is that how he comes to know? I'm just trying to understand if the request comes to the listener how listener knows what Oracle instance to route traffic to?

    2. when I do sqlplus / as sysdba how knows what Oracle instance to connect to?

    Look at the differences

    [oracle@srv01-18-102 trace]$ cat $ORACLE_HOME/network/admin/listener.ora

cat: /u01/app/oracle/product/ 11.1.0/dbhome_1/network/admin/listener.ora: No such file or directory

-- start listener

[oracle@srv01-18-102 trace]$ lsnrctl start

LSNRCTL for Linux: Version 11.1.0.7.0   on 09-JUN-2009 01:05:42

Copyright (c) 1991, 2009, Oracle.  All rights reserved.

Starting /u01/app/oracle/product/ 11.1.0/dbhome_1/bin/tnslsnr: please wait...

TNSLSNR for Linux: Version 11.1.0.7.0
Log messages written to /u01/app/oracle/diag/tnslsnr/srv01-18-102/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=srv01-18-102.amis.local)(PORT=1521)))

Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
------------------------
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 11.1.0.7.0
Start Date                09-JUN-2009 01:05:42
Uptime                    0 days 0 hr. 0 min. 0 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Log File         /u01/app/oracle/diag/tnslsnr/srv01-18-102/listener/alert/log.xml
Listening Endpoints Summary...
  (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=srv01-18-102.amis.local)(PORT=1521)))
The listener supports no services
The command completed successfully

-- startup database

SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.

SQL> startup
ORACLE instance started.

Total System Global Area  849530880 bytes
Fixed Size                  1346664 bytes
Variable Size             725615512 bytes
Database Buffers          117440512 bytes
Redo Buffers                5128192 bytes
Database mounted.
Database opened.

SQL> alter system register;

System altered.

-- check again after a while (or for registration via "alter system register")

[oracle@srv01-18-102 trace]$ lsnrctl status

LSNRCTL for Linux: Version 11.1.0.7.0    on 09-JUN-2009 01:05:50

Copyright (c) 1991, 2009, Oracle.  All rights reserved.

Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
------------------------
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 11.1.0.7.0
Start Date                09-JUN-2009 01:05:42
Uptime                    0 days 0 hr. 0 min. 8 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Log File         /u01/app/oracle/diag/tnslsnr/srv01-18-102/listener/alert/log.xml
Listening Endpoints Summary...
  (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=srv01-18-102.amis.local)(PORT=1521)))
  (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=srv01-18-102.amis.local)(PORT=8080))(Presentation=HTTP)(Session=RAW))
  (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=srv01-18-102.amis.local)(PORT=2100))(Presentation=FTP)(Session=RAW))
Services Summary...
Service "DEMO" has 1 instance(s).
  Instance "DEMO", status READY, has 1 handler(s) for this service...
Service "DEMOXDB" has 1 instance(s).
  Instance "DEMO", status READY, has 1 handler(s) for this service...
The command completed successfully

-- BEQUEATH

SQL> host
[oracle@srv01-18-102 ~]$ set ORACLE_SID=DEMO
[oracle@srv01-18-102 ~]$ sqlplus / as sysdba

SQL*Plus: Release 11.1.0.7.0   on Tue Jun 9 01:17:42 2009

Copyright (c) 1982, 2009, Oracle.  All rights reserved.

Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0
With the Partitioning, Oracle Label Security, OLAP, Data Mining,
Oracle Database Vault and Real Application Testing options

-- Query V$PROCESS

SQL> desc v$process

 Name                                      Null?    Type
 ----------------------------------------- -------- ----------------------------
 ADDR                                               RAW(4)
 PID                                                NUMBER
 SPID                                               VARCHAR2(24)   <---
 USERNAME                                           VARCHAR2(15)
 SERIAL#                                            NUMBER
 TERMINAL                                           VARCHAR2(30)
 PROGRAM                                            VARCHAR2(48)
 TRACEID                                            VARCHAR2(255)
 TRACEFILE                                          VARCHAR2(513)
 BACKGROUND                                         VARCHAR2(1)
 LATCHWAIT                                          VARCHAR2(8)
 LATCHSPIN                                          VARCHAR2(8)
 PGA_USED_MEM                                       NUMBER
 PGA_ALLOC_MEM                                      NUMBER
 PGA_FREEABLE_MEM                                   NUMBER
 PGA_MAX_MEM                                        NUMBER

SQL> select * from v$process where program like '%(TNS V1-V3)%';

52ACC7FC         19 26000                    oracle                   2
UNKNOWN                        [email protected] (TNS V1-V3)

/u01/app/oracle/diag/rdbms/DEMO/DEMO/trace/DEMO_ora_26000.trc
                                                           1286124       2699092
         1048576     4616664

1 row selected.

-- "Jump to OS"

SQL> host ps -ef|grep 26000

oracle   26000 14346  0 01:09 ?        00:00:01 oracleDEMO (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
oracle   27040 14346  0 01:16 pts/1    00:00:00 /bin/bash -c  ps -ef|grep 26000
oracle   27042 27040  0 01:16 pts/1    00:00:00 grep 26000

-- Connect via listener to the database

-- content off tnsnames.ora

[oracle@srv01-18-102 trace]$ cat $ORACLE_HOME/network/admin/tnsnames.ora
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/ 11.1.0/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.

DEMO =
  (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = srv01-18-102.amis.local)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = DEMO)
    )
  )

[oracle@srv01-18-102 ~]$ sqlplus otn/otn@DEMO

SQL*Plus: Release 11.1.0.7.0   on Tue Jun 9 01:28:52 2009

Copyright (c) 1982, 2009, Oracle.  All rights reserved.

Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0
With the Partitioning, Oracle Label Security, OLAP, Data Mining,
Oracle Database Vault and Real Application Testing options

SQL> set head off feed on

SQL> desc v$process

 Name                                      Null?    Type
 ----------------------------------------- -------- ----------------------------
 ADDR                                               RAW(4)
 PID                                                NUMBER
 SPID                                               VARCHAR2(24)   <---
 USERNAME                                           VARCHAR2(15)
 SERIAL#                                            NUMBER
 TERMINAL                                           VARCHAR2(30)
 PROGRAM                                            VARCHAR2(48)
 TRACEID                                            VARCHAR2(255)
 TRACEFILE                                          VARCHAR2(513)
 BACKGROUND                                         VARCHAR2(1)
 LATCHWAIT                                          VARCHAR2(8)
 LATCHSPIN                                          VARCHAR2(8)
 PGA_USED_MEM                                       NUMBER
 PGA_ALLOC_MEM                                      NUMBER
 PGA_FREEABLE_MEM                                   NUMBER
 PGA_MAX_MEM                                        NUMBER

SQL> select * from v$process where spid in (27372);

52ACC7FC         19 27372                    oracle                   4
UNKNOWN                        [email protected]

/u01/app/oracle/diag/rdbms/DEMO/DEMO/trace/DEMO_ora_27372.trc
                                                            705064        938372
               0      938372

-- Use info off v$process to join with v$session

SQL> select * from v$session where paddr = '52ACC7FC';

52112690        170          9     107441 52ACC7FC         93
OTN                                     3 2147483644
                         ACTIVE   DEDICATED         93
OTN                            oracle
27370
srv01-18-102.amis.local
pts/1                          [email protected] (TNS V1-V3)
USER       4C83D838     1817844678 4qpuh5jq5n6y6                0
09-JUN-09             16777216 4C83443C      1421292656 b1vt3u9abfd3h
                0 09-JUN-09              16777216

SQL*Plus                                          3669949024
                                           0

                8244            -1              0               0             0
09-JUN-09                     0 NO  NONE          NONE       NO
OTHER_GROUPS                     DISABLED ENABLED  ENABLED
                     0
                                                                 NOT IN WAIT
                                           41        322
SQL*Net message to client
driver id                                                        1413697536
0000000054435000
#bytes                                                                    1
0000000000000001
                                                                          0

00                  2000153315           7
Network                                                                  -1
              0 WAITED SHORT TIME                14
                      3730
DEMO                                                            DISABLED FALSE
FALSE FIRST EXEC                100 52ACC7FC               4

-- Use info off V$process to look pid on OS

SQL> host ps -ef | grep 27372

oracle   27372     1  0 01:30 ?        00:00:00 oracleDEMO (LOCAL=NO)
oracle   27413 27380  0 01:30 pts/1    00:00:00 /bin/bash -c  ps -ef|grep 27372
oracle   27415 27413  0 01:30 pts/1    00:00:00 grep 27372

  • Basic questions about the PL/SQL web services and data source names

    Hello

    I've successfully generated a web service for a procedure from PL/SQL packaged JDeveloper 11.1.1.3.0).

    The following code was generated in the base class for web services:
     __dataSource = (javax.sql.DataSource) __initCtx.lookup("java:comp/env/jdbc/dbconnectionDS");
    However in the weblogic server, the data source name is jdbc/Gisele for deployment fails in a first time.

    What is the recommended procedure to solve this problem? The obvious solution is to manually change the source - that's what I did and it worked fine. However if I re - generate the web service I won't lose my change. Is there a better way to do it?

    Another question - in the web.xml file that is generated, there is a resource-ref to the data source. I was hoping that change the data source name it would help, but it didn't work. What is - it used to in this context?

    Thank you
    Luis

    I forgot to add, so in case some time later and you want to update the connection to your service details, all you have to do is to add the following entry in your weblogic.xml:
    .

    JDBC/ref_name_from_web. XML
    JDBC/new_jndi_name

    .
    And in this way, you will not have to change any code level to point your web service to another connection.

    Vishal-

  • basic questions about the Bigdata, NOSQL, and Hadoop


    Hello

    I have fundamental questions related to Bigdata. (I have Googled it but still want to confirm with experts)

    Please correct me if I'm wrong on below.

    (1) as far as I know data large are the collection of unstructured data. We can even store relational data as well.

    (2) NOSQL is a product of Oracle to manage bigdata (UN structured data and relational data as well)

    (3) Hadoop is the only framework that is available on the market to manage the bigdata.

    What are the other systems of database that we have in the market to manage the bigdata.

    See you soon,.

    Suri

    Suri,

    NoSQL is a distributed (with indexing and schematics) database. From a database point of view, NoSQL is a good place to start you off. Hadoop is a framework for distributed processing, rather than a database. If you are looking to take advantage of your database skills, then I suggest starting with NoSQL.

    Oracle Press has recently published "Oracle Big Data Handbook," which is an overview of the suite of large data Oracle technology products. I would start there. You can find the book on Oracle Press or Amazon , Barnes & Noble.

    I hope this helps.

    Kind regards

    Dave

  • Basic question on the Data Guard environment

    Friends, please excuse me for this easy question because I am very new to the Dataguard technology, what will be ideal start-up and sequences of stop primary and standby db provided is the version of DB Oracle 11 g R2 and we also have active dataguard broker.

    Any help will be much appreciated.

    Thanks in advance.

    918868 wrote:
    Friends, please excuse me for this easy question because I am very new to the Dataguard technology, what will be ideal start-up and sequences of stop primary and standby db provided is the version of DB Oracle 11 g R2 and we also have active dataguard broker.

    Any help will be much appreciated.

    Thanks in advance.

    (1) standby: DGMGRL > SET STATE of MODIFICATION of DATABASE "Standby_DB_UNIQUE_NAME" = "APPLY-OFF."
    (2) primary: DGMGRL > EDIT DATABASE 'Standby_DB_UNIQUE_NAME' PROPERTY SET LogShipping = OFF;
    (3) standby: stop
    (4) primary stop.

    At startup:

    (1) primary starting
    (2) standby: start [if ADG], otherwise then starting in the State
    (3) primary: DGMGRL > EDIT DATABASE 'Standby_DB_UNIQUE_NAME' PROPERTY SET LogShipping = ON;

    No need to start MRP waiting, because whenever the broker started, MRP will be initiated.

    HTH.

    Published by: CKPT on February 22, 2013 15:18

  • Basic questions about the installation of ASM

    I can't find definitive answers to the following. Let me try here. I want to build a server Linux, RDBMS 11.2.0.3, running with the ASM. It's just the prototype server, in our conversion of Oracle 11 g on AIX without ASM on Oracle 11 g on Linux with the ASM.

    I have an Oracle VM already running cluster and built a number of virtual machines in models, and everything works fine. Now I am installing DSO, have failed repeatedly. Maybe I'm doing something fundamentally wrong. Here are two questions:

    1. is it true that the only (reasonable) to install DSO is to install the product called "grid Infrastructure? As far as I know, the answer is 'yes '. But GI seems to be so much more than ASM, although I don't think I want or need. Is there an easier way to get ASM?

    2. the matrix certification swear that grid 11.2.0.3 Infrastructure is certified on Oracle Linux 6. (1) I can still see a lot of posts on OTN and elsewhere on the net that say it is NOT supported and that there are has mant problems in get the installation works, and (2) I have tried to install it on OEL 6 and can't get the installer to finish. Specifically, the root.sh script fails with "ohasd failed to start... '. ». Before further my installation problems, I want to just make sure: If this installation of OEL 6?

    Terry Phelps wrote:
    I can't find definitive answers to the following. Let me try here. I want to build a server Linux, RDBMS 11.2.0.3, running with the ASM. It's just the prototype server, in our conversion of Oracle 11 g on AIX without ASM on Oracle 11 g on Linux with the ASM.

    I have an Oracle VM already running cluster and built a number of virtual machines in models, and everything works fine. Now I am installing DSO, have failed repeatedly. Maybe I'm doing something fundamentally wrong. Here are two questions:

    1. is it true that the only (reasonable) to install DSO is to install the product called "grid Infrastructure? As far as I know, the answer is 'yes '. But GI seems to be so much more than ASM, although I don't think I want or need. Is there an easier way to get ASM?

    ASM is a feature of the Oracle Grid infrastructure Installation. So you will need to install IM using ASM.

    There is a GI installation which can be installed and configured in two different directions. For a Cluster or for a standalone.

    This option must be selected during installation.

    The installation of GI for a standalone is called Oracle Restart.

    GI for a Cluster installation is called Oracle Clusterware.

    The two options above have the particularity of the DSO.

    2. the matrix certification swear that grid 11.2.0.3 Infrastructure is certified on Oracle Linux 6. (1) I can still see a lot of posts on OTN and elsewhere on the net that say it is NOT supported and that there are has mant problems in get the installation works, and (2) I have tried to install it on OEL 6 and can't get the installer to finish. Specifically, the root.sh script fails with "ohasd failed to start... '. ». Before further my installation problems, I want to just make sure: If this installation of OEL 6?

    A lot of users here OTN tried installing Grid Infrastructure on RHEL6/OEL6 when it is not certified. Many questions appear.

    When it has been certified by Oracle, it remains several notes on MOS that will help you follow the main steps for a successful installation.

    I think you should use OEL 6, since Oracle Linux 6 has been certified by Oracle Corporation, you have all the support on this product.

    Start with this note: * master Note Linux OS requirements for database server [851598.1 ID] *.

    * Customer database or the server installation of database on Red Hat Enterprise Linux 6 (RHEL6) or Oracle Linux 6 [ID 1350000.1] *.

    http://levipereira.WordPress.com/2012/04/18/certification-of-the-Oracle-database-on-Oracle-Linux-6-and-Red-Hat-Enterprise-Linux-6/

  • Basic question on the import/export of movies

    Hi all! I'm a complete novice with Flash (and implementation). I used many years ago, but have not used in a time very, very long time. Flash may even not be the program I need... so let me know if this is the case.

    Basically, I shot a video with my camera. It is a .mov file. I imported into iMovie and edited. Then I exported it as a .mov file. I want to embed the video in a web page. As far as I know, in Dreamweaver, it must be a .swf file. But I don't think that I can export a SWF of iMovie. Then I read online I could convert my file using Flash.

    I followed the instructions, I found online, but rather it seems to work... it's not. Here's what I did:

    I open a new file in Flash. I used the default type. I clicked on the timeline and went to file > import > Import film (using all the default choices).

    I have broused find the .mov file. I clicked Next.

    I chose a skin which is the default value (minimal flat Custom Color play back to see CounterV...). Clicking next. Clicked on Finish.

    A small movie actor is now on the screen of my Flash.

    I started to add frames (F5). I see images are added in the timeline panel.

    But... when I go to play the film... He DOES not play... but the screen is black.

    I see that I CAN export it as a swf file... but since I can't see the movie when I play, I'm guessing that's not working (the tutorial I used says that I should be able to see it at this point).

    Then I'm go about how completely wrong? Why it does not work? Please help out me.

    Julie

    PS I use Flash Professional CC c 13.0.0.759 on an iMac.

    It is installed with flash pro.  Search your computer, it is already installed if you have flash pro is installed.

  • basic questions about the URL interactions.

    I'm a beginner one week in Flash catalyst and done great. I have a few questions so.

    (1) how is - a edit interaction on a button? for example I added an interaction of the URL, but want to change. Seems that have the options of adding additional interactions, or remove the button and adding a new library.

    (2) after publication, if I click on a button to access a URL, I would return to the flash site after the closure of the URL. Unfortunately, when I enter the URL, my flash site is closed.

    Any help would be appreciated!

    Andy

    You can change an existing interaction by double-clicking on it in the Interaction Panel.

    When you create or modify the interaction, you can set the URL to open in the same browser window or in a new window. If you select the option for it to open in a new window, your application will always be there when the user closes the window in which the link open.

  • Basic question on the Flex SDK kit:

    I'm a noob and can not afford Flex Builder, so I downloaded the Flex SDK kit.  I have the Java runtime and my sys JAVAHOME variable value.  I ran the

    C:\Program Files\FlexSDK\samples\explorer\build.bat

    .. .and it ran for a few minutes (I assume with success since I saw not the word "error" appear anywhere in the command line window).

    Now - I don't know if Component Explorer had been there before in the original of the Flex SDK kit download (where all which I copied into a directory I made called "C:\Program Files\FlexSDK\", but he is now inside the directory "C:\Program Files\FlexSDK\samples\explorer\".)  I don't know whether or not my batch.bat running created this "Explorer.html".  T it?

    My next question.  When I opened this Explorer.html - I received the order to Flex files to view sample - I see nothing but gray.

    I don't know what to do, but this is compounded by the fact that I am new to all of this - I don't know what to expect or the other.

    Can anyone help point me in the right direction?  Thank you.

    It looks like a write permissions problem. The Program Files directory has restrictions more stringent than other directories and mxmlc fails silently write the swf file.

    Please, create a "FlexSDK" directory directly under C:\ or in your own user directory, expand your SDK it and try again.

  • Basic question on the implementation of the Oracle trigger

    For example, suppose I have this trigger code:
    CREATE TRIGGER schema.trigger_name 
    BEFORE 
    DELETE OR INSERT OR UPDATE 
    ON schema.table_name 
       pl/sql_block
END trigger_name;
ALTER TRIGGER schema.trigger_name ENABLE;
commit;
    The weird part is I wrote this trigger but don't know how to run it. Can someone give me the answer to these question, please?

    1. How can I add this trigger on the table 'table_1 '.
    2. I want the trigger to be permanent on the table_1 and not only for a particular session. How do I do that?
    3. are there things I need to take care of during the execution of a trigger? Something like best practices?

    I'm using Linux. So, please give your solution based on SQL more

    EDIT: Also, how can I make sure that the trigger is. Is it possible to see?

    Edited by: TuX4EvA January 6, 2010 03:24

    1.
    Replace

    ON schema.table_name

    by

    on schema.table1

    2 triggers in the table are always permanent and not for a given session.

    To check this trigger is created in the database dictionary, you can use

     select owner, trigger_name from all_triggers;

    For more information on triggers, please take a look at the Guide of the Oracle® Database 2 day Developer's:
    http://download.Oracle.com/docs/CD/E11882_01/AppDev.112/e10766/tdddg_triggers.htm#BABIHIHH

    Edited by: P. Forstmann on 6 Jan. 2010 12:28

    Edited by: P. Forstmann on 6 Jan. 2010 12:31

  • Basic question on the virus / malware etc...

    Hello.

    Can someone explain to me in simple terms, why operation systems does ' t Apple need to be protected against the virus / malware etc?

    I know that Microsoft Windows need a protected software, Apple is not...

    Thank you.

    There is no "viruses" that attack the Mac OS yet.

    He is also a Malware that can be identified if you install https://www.malwarebytes.org/

    just be careful where and who download you.

  • Basic question about the selection of the AP and multiple channels

    I have about 10 PA (Aironet 1240 G) intended to be deployed one of my floors of office. We examined a diagram of the floor and made sure that we ordered enough to completely saturate the ground with wireless coverage. There are a few AP which are probably only 50' with each other. It's actually a bit exaggerated.

    I put a base on the switch configuration so that there are two different SSID on the access point (one for a production of WLAN and the other for a WLAN comments). Each SSID is associated with a VLAN different.

    I want to know is this what to do on the channels for the AP? Each access point will be independently configured and controlled.

    I understand that there is a way to control which channels each AP uses, but I'm not familiar with the controls or best practices for the configuration of the AP

    Can I do something like make sure that each access point uses a different channel than its nearest adjacent neighbors? Someone would mind sharing what is the command to do it, and where it is applied?

    I have read through some archives and saw people talk to set "no bunk channels" and to configure them to use 1,6,11 channels. I guess I don't understand what is meant by there.

    Manually define you an access point to channel 1, then set his neighbour to use 6 and another neighbor to use 11, and then you who stay?

    What is the worst of the scenarios on what happens when you have no AP too close to the other located on the same channel?

    It is a pleasure to read through the documentation if someone wouldn't mind pointing me to it. I'm still trying to understand the concept, and then I should be able to understand the documentation that came with the AP.

    Thank you for your help.

    If your stand-alone Access Points. If it was a deployment of Comptrollership, in fact to dynamically manage the channels for you.

    But what you really want to do, is you see APs do something like this:

    (imagine each number represents an access point, and it channel)

    1 6 11 1

    6 11 1 6

    11 1 6 11

    1 6 11 1

    It is a conceerne configuration guide. I think he has a small section on the channel assignment. If you do this manually, I think that you specify the actual frequency used in the CLI instead of the channel number.

    http://www.Cisco.com/en/us/docs/wireless/access_point/12.4_3g_JA/configuration/guide/s43rf.html

    So the CLI under the Dot11Radio0 you would do something like 'channel 2412' for channel 1... 2437 for 6, 2462

    for 11...

    If you have APs side by side on the same channel, you are likely to have clients interfere between them.

Maybe you are looking for