Bat button fn - b Audio does not work after the installation of Win 8.1

Similar Questions

• Audio does not work after the installation of Vista on Satellite Pro a series?

  Done a format and a new facility with vista ultimate and can't get the audio from realtek to work.
  The drivers install properly but don't have still no sound.

  Download realtek 97 and drivers HD, but still no luck.

  I had this problem some time and fixed it but I can't find where I found the solution of :(

  Any help would be great, thanks!

  Hello

  First if all would be very useful to know which model of laptop you have.
  Second, you could find the driver of his right on the page of Toshiba and so you n t need to test several audio drivers! The one on the Toshiba driver site works for sure.

  I read about a similar problem on Vista OS and these Toshiba document should help you:
  [Audio cut off (no sound) after the installation of Windows Vista: http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1886 758xml & sliceId = & dialogid = 54568603 & stateId = 0 0 51373343]

  Check it out!

• Satellite L655 touchpad button ON / OFF does not work after the installation of VAP

  Why the Start button / stop the touch pad does not work after the installation of vap?

  May I ask what system and what PPV version do you have installed?

  I assume you mean on the Fn + F9 key combination...
  Is this right?

  Another FN button work as shouldy?

• LIP does not work after the installation of a local language, writing in my windows software 8

  LIP does not work after the installation of a local language, writing in my windows software 8

  

  This icon is hidden... and there is no preview in the installed LIP.

  
  I hv uninstall the software, but for the LIPS does not work

  Hello

  You use the Microsoft Account or Local user account?

  Create a new user account and check the status of the question in the new user account.

  Create a user account

  http://Windows.Microsoft.com/en-in/Windows/create-user-account#create-user-account=Windows-8

  You can also refer to:

  User accounts: frequently asked questions.

  http://Windows.Microsoft.com/en-in/Windows-8/user-accounts-frequently-asked-questions

  Thank you.

• Satellite U200 - sound does not work after the installation of Win8.1

  Hello guys,.

  I have some old Satellite U200-165. I installed windows 8.1 Enterprise assessment successfully after that I changed the hard drive SSD, but the sound does not work. Windows showing that his work perfectly, but it does not come out.

  An advise please.

  Satellite U200 is a pretty old and not supported for Win8 or Win8.1 machine. I think that we have no report on this forum how this old piece of equipment works with Win8.

  If the sound card is properly installed, have you checked all the sound settings?
  I presume that the same problem is with a headset, right?

• Qosmio X 500-webcam does not work after the installation of W7 Ultimate

  Hello
  I have a big problem.

  First: Sorry English is not my native language and I can't find a German support forum here.

  I have a new laptop Qosmio X 500, and I installed Windows 7 Ultimate 64 - Bit of news. I try to install all the drivers from the site Web of Toshiba, but it't really didn't work with the Webcam.
  I can't install it. It works once, I can install the "Web camera Application", but he says that it cannot find the web camera. Then, I uninstalled the "Web camera Application" and try to installed new.
  Who does not work now too. He asked: "if I'm going to delete all" but I delete them all! And I can not install the "tinstall.exe" I don't know what it is, but it is from the WebCam Driver of Toshiba.

  In the Device Manager there is no Web camera too.

  All means what? Is the WebCam broken? I've had the laptop for 5 days.

  Greetings

  Hello

  Qosmio X 500 shipped with Win7 64 bit OS so I really put t understand why you use clean install of the OS. Ultimate version is so important to you?

  At first, I must say that the Qosmio X 500 is more complicated for laptop for any new OS install and all things must be installed in the correct order.

  But back to your questions:
  > All means what?
  It probably means that you are missing something
  > Is the WebCam broken?
  Probably not. Install original OS, you got with your laptop and test the features of cam again.
  > I've had the laptop for 5 days.
  This statement is not relevant at all. If you do something yourself and it works not that's problem and even your laptop is 5 hours old.

  What now? is original OS install an option for you?
  You have created recovery DVDs until you have installed the clean version of Win7? I hope because without DVD, you won't be able to install it using the option of HARD drive recovery.

• Intel WiDi does not work after the installation of update Windows 10 anniversary. X 1 yoga

  I get a message Notification of Windows ' cannot run this application on this PC: Intel WIDI software display does not work on this version of Windows. "

  This message appeared after the upgrade to Windows 10 anniversary.

  Indothai,

  Microsoft to Intel Widi support was eliminated in 10 Windows. WIDI has been replaced by an application called Miracast. If you try to run an application depends on Widi, you may need to upgrade the application or to find a new use.

  For more information, see this Intel review: https://communities.intel.com/docs/DOC-111153

  Thank you

• Windows Server Update service does not work after the installation of KB2720211

  I have a Server 2008 SP1 32-bit Standard, which had the role of Server Update for the Windows software installed connected to a WSUS upstream server and everything worked, with 17 clients connected to him and get everything their approved patches.  It was a new server starting with WSUS added at this time 1 months ago.  He had to be upgraded to SP2 S2008 which I did and WSUS have continued to function.  After being on SP2, there was another 152 patches to be applied and after that WSUS does not work anymore.  It appears 1 patch that has been applied has been KB2720211 that seems to cause problems for a number of people.

  The problem is that the update service does not start.  An error message comes back that the service has not responded in a timely fashion and I can't find the log files anywhere on what it is.  Here is what has been done so far all that in the same issue:

  1 deleted WSUS and restarted and installed it again.

  2 Remove WSUS and Windows Internal Database, restarted and installed it again (using the download of KB972466).

  2.1 install SQL Management Studio and logged to an internal database SUSDB and checked it is not set to single user (I believe it is set for multiuser name but I'm going from memory)

  3. install the KB2720211.

  4. installation KB2734608

  5 remove WSUS and Windows Internal Database, restarted and installed it again (using the download of KB972466).

  I am looking for any information on how to solve what is the question, because there is nothing in the log files I can find and no event in the windows event viewer.  I am ready to start with the server however if there is something I can look at to possibly solve the problem, please let me know.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Computer does not start after the installation of Win XP SP3

  original title: ServicePack 3 does not work

  After loading service pack 3 my computer does not upwards, unless I use safe mode. It restores not to any restore point. I uninstall and go back to service pack two and get constant reminders to update three when it won't work. After saying it works fine if a little slow in two so is there any point of update.

  Recently, I reset my computer to factory settings to erase the disc from loads of unwanted waste and programs. Reloaded ServicePack two, he wouldn't go back with gel. After reading the old posts, I found a link to Jespers blog. It contained a small tool that intelPPM problems detected and then given the option to turn off the setting. http://msinfluentials.com/blogs/jesper/archive/2008/05/08/does-your-amd-based-computer-boot-after-installing-xp-sp3.aspx.

  This fixes the problem and service pack three charges and now works fine. The tool is loaded in seconds.

• HP Envy 15 t-j100: Beats Audio does not work after the new update of Windows 10?

  My laptop set to automatically update itself with the new update of windows 10, and after checking my laptop I discovered that the bat sign was gone and uninstalled in my pc. The sound from my laptop has no depth and clarity. Is there a way I could find a driver that has the bat inside Control Panel? Thank you.

  The softpaq driver audio Intel IDT next will install the audio driver and the control panel of beats.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

• Libretto W100 - 10 d - 3 G Module does not work after the installation of the system

  Hello

  I just reinstalled the software on my Libretto W100 - 10 d, from the internal HARD disk recovery partition recovery procedure.

  After the intervention, I have a clean booklet; all works well, except my 3 G Module is not recognized: the SW of Wireless Manager is not installed, and the 3G module does not appear in Device Manager more!

  It seems that the 3G module is not installed! of course before the recovery procedure, it worked like a charm!

  I suspect something has disabled the 3G module (usually something similar happens in the BIOS...)

  Can someone help me so that the 3G module working in return?

  Of many tanks and best regards

  Hello

  Have you checked the settings in the BIOS?
  To be honest I'm not quite sure if BIOS contains separate power switch or option Wlan 3G but you must absolutely check it m.

  To access the BIOS press ESC and F1
  Where would the BIOS contains 3 G or Wlan option, make sure that this option is enabled.

  Then visit the Toshiba UE driver page and download and install the Ericsson 3 G driver
  This is the driver for the 3G module.

• Satellite U840W-10J - WiFi does not work after the mode 'sleep' - Win 8.1

  Ladies and gentlemen,

  I bought a Satellite U840W-10 days; PSU5XE on Windows 8 was preinstalled. I've updated to Windows 8.1.

  My wifi works until the laptop goes to sleep once, then it does not any longer and I have to restart as it cannot connect to the Internet again once.

  I use a VPN as well.

  I've already updated the wlan Driver and many other drivers as well but nothing helps.

  Thank you for helping me
  123XYZ

  Try this:
  (a) press the Windows key + X, select Device Manager.
  (b) right click on network adapters.
  (c) click on properties and select the power management tab.
  (d) uncheck the box allow the computer to turn off this device to save power.

  Finally restart the system

• My internet does not work after the installation of El Capitan 10.11.3.  Help, please!

  I upgraded to El Capitan 10.11.3 tonight and now internet will not work.  I can't connect to the app store either.  I can connect to wifi but safari says "Safari cannot open the page.  Safari can't open the page "https. ' / / www.yahoo.com/.  The error is "the operation could not be completed.  Operation not permitted. (INSPOSIXErrorDomain:1) ' can someone help!

  Thank you!

  Hi SmilingDaddy

  Here are a couple of things to try. Here I am assuming you are using a wireless router?

  Open system preferences > network

  The name of your network appears in "network name"?

  Click on the button "Advanced...". »

  In the WiFi list, make sure that your preferred network is at the top of the list.

  Click on the TCP/IP tab and click on 'Renew DHCP lease'

  Now you have Internet?

  Try turning off WiFi, either in the same pane of network, or by clicking on the WiFi icon in the menu bar. Then wait a minute and put it back on.

  If you hold down "Option" key and click the wireless in the Menu bar, you can click on the 'open Wireless Diagnostics... '. "There is also info even before making it on the signal strength, etc... WD can give you help and additional information.

  Let us know if it works and if not, please give any info you can. Are you using WiFI? Are you using a cable/DSL Service? What model of iMac?

  Hope this helps, Greg

• Office of creative cloud does not work after the installation of yosemite

  About 2 weeks after that I installed on my macbook pro 2013 yosemite I can't open the creative cloud Office. the logo is displayed for one second on the menu bar, then disappears again. Also the software CC I already installed (Indesign, Acrobat) seems to not work perfectly.

  I have already uninstalled and reinstalled the Manager of office with the same result. Now, I think about downgrading to the mavericks...

  Thanks for any help!

  SOLUTION. I had the same problem, after doing a cat from Adobe it came down to an app called Cooliris in Applications. Not sure yet what done.

  Deletion of it worked.

  Before that we went to the library-LaunchAgents, made a copy, call the old LaunchAgents and move these files.

  com.adobe.AAM.Updater - 1.0.plist and

  com.adobe.ARM.de23d1e3aa2d00ce38d73f10fcbdc8dcaaaf6be989610710a1ddda77.plist

  We did something with the LaunchDaemons as well, not sure, but it did not initially help. Just deleting coolers made

• Internet does not work after the installation of updates

  From 2 updates (KB972270 and KB955759) internet wouldn't work once these updates have been installed.  I removed the updates and turned off the automatic update feature.  Periodically, I would try again but the same result.  I'm now 16 updates to download and I tried last night, but once again not Internet... even after manually loading all, but updates 2 above.  I want to keep my computer up to date but can't seem to solve the problem of the internet.  Is there a problem with the Microsoft updates?  How can I fix the problem, so I can update my computer?

  Open Internet Explorer (only) to http://windowsupdate.microsoft.com GOLD http://update.microsoft.com/microsoftupdate . Select CUSTOM and scan: are any of the updates other than KB972270 and offered KB955759?

  NB: If an update of root certificates is listed under the category of optional software updates on the left side of the scan results window, install it to enjoy greater security of IE8.

  If you choose not to install KB955759, you run difficulty he #50326 in http://support.microsoft.com/kb/954157 to protect your computer.

  Note: I'm not going to tell you it's OK do not install a critical security update. If IE crashes after installation of an update, something is wrong with your computer (e.g., an infection, one or several incompatible modules of the IE; a "horked" install IE8).

  If you install a security update & have a problem...
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft