Battery and graphics of the laptop bios problems

1. set up bios is broken.
2 when I put into hibernation windows then its almost impossible to start the windows
3. here hv a replacement of my 601 battery error error when windows starts
4. when I unplug the charger, then sometimes laptop having hung
5. when I play 1080 p video and video is stuck
6. impossible to update windows.
Let me tell what I can do.
Thank you.

Hello

What is and what operating system? Please follow the instructions below to find the product/model of your machine:

http://support.HP.com/us-en/document/c00033108

Kind regards.

Tags: Notebooks

Similar Questions

  • The battery of my computer does not load. I changed the battery and I changed the AC adapter, and I always get this message: "0% available (plugged in, not supported)" I don't know what the problem is.

    My computer the battery does not charge.  I bought a new battery and I changed the AC adapter but the battery still won't charge.  This is the message I get:
    0% available (plugged in, not charging) don't know why.

    Hello

    1. What is the number of brand and model of your computer?

    Let us try the steps mentioned below to see if the problem is resolved.

    Step 1:

    a. Click Start; type devmgmt.msc in the start search box and press ENTER.

    b. expand the batteries category.

    c. under the batteries category, right-click in the list of Microsoft ACPI compatible with battery control method and choose uninstall.
    WARNING: Do not remove the Microsoft AC adapter driver or any other compatible ACPI driver.

    d. on the Device Manager, click Action and then click Scan for hardware changes.

    Windows will scan your computer for hardware which has not installed the drivers and will install the necessary drivers to manage the battery power. The notebook should now indicate that the battery is charging.

    Step 2:

    If this does not work, try power cycling of your laptop by following the steps below.

    a. remove the battery from your laptop, and then press the power button to all 15 sec.
    b. now connect to the battery and check if it works.

    I suggest also, please contact your computer manufacturer to see if they have any suggestions about it.

  • (Redirected) Power adapter green light turns off when the laptop battery is plugged into the laptop and does not load.

    Power adapter green light turns off when the laptop battery is plugged into the laptop and will not charge; If the laptop battery is not plugged into the laptop adapter it's still green and will charge the laptop.

    As you have a laptop, better make this laptop in the computer Forum post here:

    http://en.community.Dell.com/support-forums/laptop/default.aspx

    Tip: when you post a message, preferable to always include the computer model.

    Bev.

  • I was somehow infected and after restarting the laptop, it goes to a white screen.

    Original title: Virus

    I have an old HP Pavilion 2008. I was somehow infected and after restarting the laptop, it goes to a white screen. Not even the HP logo lights up. I can't access installation even though I know which key press.

    I created a bootable windows DVD 7 and a USB port. I can not even boot from one of them. With the DVD, it sounds like it wants to read, but there is something else wrong.

    Any help would be greatly appreciated.

    If the HP logo comes and you can't access BIOS, the problem is more likely to be at a lower level. A failed HARD drive should not prevent you from access to the configuration.

    Several things can cause the logo appears at the top (I write from a HP Pavillion 2008). I've dealt with many laptops such as yours and have seen many causes. Faulty RAM memory is a. A problem with the video chip is another. In fact several kinds of tokens (two bridges, video..). A virus is more unlikely but not impossible (if he messed with your BIOS, it is possible).

    If you don't see movement in your DVD or HARD drive, something I'm leaning more towards the video chip. Especially if it's Nvidia or Radeon - it would be a miracle if you use an HP laptop of 9 years with a powerful video (so that there is time) without having had any problems with it until now (mine is Intel). They overheat easily.

    What I would do in your case:

    1. remove the battery and unplug the unit. Give it 10 minutes and see what happens. Small chance, it would be useful, but it's easier to test.

    2. If you are reluctant to remove anything yourself proceed to 4. Otherwise, open the case and look for a reset (might want to read in the manual how to do it), remove the internal battery.

    3 try to remove the first (try to run) then the other of your plates to RAM (assuming you have two). During the race, all the tests remove the drive HARD and DVD just to eliminate the possibility of interference. If you manage to get started and get the logo and enter BIOS start adding parts back one by one and you will find the faulty one.

    4. If it at a gas station. Now you can do anything, if you can not enter BIOS so it must be a hardware change.

  • PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

    Vista - Windows 7 network connection. username and password is unknown.

    Hello

    I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

    If someone could answer this question, it would be great.

    Hello
    Maybe this can help.

    Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

    Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

    Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.

    Public share
    = network Public (as Internet Café) in order to reduce security risks.

    For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

    http://www.ezlan.NET/Win7/net_name.jpg

    Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

    General example, http://www.ezlan.net/faq.html#trusted
    Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    ------------------------------

    If your network consists only of Win 7 and you want a simple network, use it.

    http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

    After you have configured the homegroup, scroll to the bottom for the Permission/security section.

    -----------------------------

    Win 7 networking with other version of Windows as a work network.

    In the center of the network, by clicking on the type of network opens the window to the right.

    Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

    http://www.ezlan.NET/Win7/net_type.jpg

    Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

    Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

    Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

    Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
    Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

    Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
    Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

    When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

    -------------

    If you have authorization and security problems, check the following settings.

    Point to a folder that wants to share do right click and choose Properties.

    In the properties

    Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

    This screen shot is to Win 7, Vista menus are similar.

    http://www.ezlan.NET/Win7/permission-security.jpg

    The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

    When everything is OK, restart the network (router and computer).

    * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

    * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

    ---------------------

    *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up.

    I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up. Currently I try to modify the INF file but is seeking a help or suggestions in T/S to this problem. Thank you.

    original title: third party INF problems

    Hi Paul,.

    ·         Why are you using a USB port to create a network connection instead of using an Ethernet connection?

    You can see the following article on how to set up a network.

    How to set up a small network with Windows XP Home Edition (PART 1)

  • can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop

    can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop

    You define 'Action close lid' to the 'status quo' instead of sleep or Shut down:
    Go to-> double click "Power Options" Control Panel-> 'Select a power plan' under your selected plan, click "Change plan settings"-> "Change plan", click on the blue link 'Change advanced power'-> in 'Advanced settings' tab expand "power buttons and lid"-> extend the action of the 'close' lid, set "on battery" and "Plugged in" to "Do nothing"-> click apply-> OK button

    Multiple monitors: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

    Set up multiple monitors
    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

    Move windows between multiple monitors
    http://Windows.Microsoft.com/en-us/Windows-Vista/move-Windows-between-multiple-monitors

    Understanding multiple monitors
    http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

  • Sound crackling and distorted on the laptop

    Original title: my laptops internal speakers are now suddenly deformed and crunchy the laptop is only 2 years any ideas how to fix this problem. I tried external speakers... not good.

    Sound distortion

    Hi young surfer,.

    1. What is the brand and model of the laptop?
    2. Since when are you facing this problem?
        
    Step 1:

    Run the troubleshooting of Audio playback and check if it helps.

    a. open the Troubleshoot utility to play a sound by clicking the Start button, then Control Panel.
    (b) in the search box, type troubleshooting and then click Troubleshooting.
    c. under hardware and sound, click on the audio playback problems.
    d. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    Audio playback convenience open
    http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

    Step 2:

    Try disabling audio enhancements and check if that helps.

    a. sound type by clicking on the button start, Control Panel. In the search box, type sound, and then click sound.
    b. on the playback tab, click speakers and then click Properties.
    c. click the enhancements tab, and then check Disable all improvements.

    If you do not see the enhancements tab in the speakers Properties dialog box, these features are not available for your speakers, and this procedure is not applicable to your computer.

    If disabling audio enhancements solves the audio problem you are having, this indicates usually that your audio driver needs to be updated.

    Reference:

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    See also:

    How can I stop my music skip or break down when I play?
    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it

    Step 3:

    You can also check out the link below

    Tips for solving common audio problems
    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Re: Satellite Pro L40 - killed the laptop BIOS update

    Recently I thought it would be better to download the latest drivers and upgrades for my Satellite pro L40 to keep up-to-date and partners the laptop that works smoothly. I couldn't have worse summer. Before I updated the new driver updates I thought it would be a good idea first update the Bios. So I downloaded the update of the Bios on the Toshiba site, unzipped the files and followed the online instructions for updating the BIOS. I double clicked on the BIOS file to run the update, the laptop says it was end the session, I waited and the Toshiba logo screen came. In the instructions, it says that I have to press F2 now and confirm that the date and time are correct. I should then press F9 to load all the default values and then press F10 to save and exit. At this point, the laptop must away to the loading screen, but... I got a black screen. IV turned off the computer and turn it back on, but still, I get a blank screen. The lights are on but know one's home.

    Could a mod/staff/Board Toshiba administrator please explain to me why I'm going to draw the consequences of my lack full on my face because I followed a form of direct teaching of personnel of Toshiba or... Please run me through the process of bring back my cell partners in life, before that I get my Crown snatched jewels. This isn't a laugh. An upgrade directly from the manufacturer is not intended to cause you problems!

    Please get back to me as soon as POSSIBLE. My first son moments of life (videos, photos) are on this laptop. That cannot be replaced. Please tell me that the laptop can be fixed...

    Hello Durks

    I'm really sorry to hear you I have this problem.
    To be honest, it is not easy to discuss about this because a lot of people on this forum with a similar or same problem reacts quite aggressive if they don t hear exactly the thing they want to hear.

    In any case, I just want to write my comment. Don t be worried about photos and other important data. You can remove the laptop HARD drive, put it in a small box of HDD SATA 2.5 and connect the HARD drive to the other PC / laptop as external device. You will have full access to all stored data. So you can do the backup.

    Update the BIOS.
    What to say at this point?
    I have checked the Toshiba download page and saw that the BIOS update is available for Windows XP Home edition and Vista pre-installed notebooks so I hope you ve chosen the right one. Anyway, it is not easy to fix screwed up in the BIOS. You hate me now, but I think you should contact the nearest Toshiba service provider and ask for help. Call them, explain the situation and ask what you can do about it.

    I hope you will fix this laptop soon.

    Good luck.

  • Games and graphics on the Satellite A100-197

    I have a portable satellite A100-197 and I have problems to read some games. Most of the games work very well, but I have problems to read games on Steam, as source of counterstrike and half-life 2.

    Before starting the game, I gives me an error message saying Steam does not recognize my graphics card, and when I go in the game there is no display, just a white screen. I am told by the error message I use ' Mobile Intel 945GM express chipset family "." I don't know hardly what to do, if there is something that I can download to fix this or if I have to buy a new graphics card.

    If this is the case, should what card I buy? I said I need a low profile card, is this the case? What is the best to buy a small budget? I know there are a number of issues, but someone could please help me! Thanks ;)

    Hello

    I also play counter strike and my practice of experience games flow needs always the latest graphics driver.
    Especially the laptop manufacturers do not provide the latest versions and to look at other sites for the most recent version.

    According to your message, the phone supports an Intel 945 GM graphics card.
    Visit the Intel website and download the new chipset / graphic driver for this card.

  • V3 - 574G black and cannot restart the laptop screen

    Currently unable to use the laptop at all because he has himself in a State where I can not restart to reset.

    When "on", the keypad backlight is on but the laptop has a black screen - and pressing caps lock for example does nothing (should be a status light?) and pressing Fn + F9 does not switch the backlighting on the keyboard.  The battery charge light turns on when I plug the power supply as the power light when the laptop is supposed to be 'on '.

    The obvious thing to try is to hold the power button for 5-10 seconds, but after I press power for 2 seconds, the power goes out and continuing to press on the power button are nothing else.  Pressing power again after a delay to turn it back on to bring him in the same black screen condition as before.

    Can anyone help?  I saw a previous response where the solution is to open the back of the laptop to remove the CMOS battery for a few minutes - but have never opened the laptop before and would rather not as still under warranty.

    The machine is an Acer V3 - 574 G-56LU, and I have updates Windows automatic running (so has updated to Windows 10 anniversary for example), and I regularly use the Nvidia GeForce driver for the graphics card update.

    A happy ending - has proved to be a card mother dud.

    How's this for Acer service? Referred to a case of repair, dropped the laptop off the next day (Friday) to a UPS drop-off, delivery performed Monday at the centre of repair, motherboard diagnosed and replaced within 2-3 hours and packed for shipping to me upward this morning. UPS return delivery the next day (this Tuesday afternoon). Data on the hard drive that I couldn't save all intact. I am delighted! Thanks Acer!

  • computer laptop power adapter / battery not recognized by the laptop when connecting

    Please help I just buy a new battery it works fine but I realized that when I unplug the adapter and put it back again when the tower is on it does not recognize it and when I turned off the computer and put it... it will normally recognize and keep on even though I started the computer, but if I just remove it and put it once again it is the same thing again and again... I have compaq hp c740EE windows vista

    Hello

    Could be a BIOS problem. And it is more likely to be the charger circuit that the
    battery although anything is possible. Definitely check with the support of Compaq and ask
    in their forums because this could well be a known issue with a hotfix.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Low battery and go to the message of power output

    Recently, I got a low battery message asking me to switch to the diet - even when the power supply is already connected.
    Is it possible to "switch" to diet without taking out the battery?

    My battery seems to charge better with my machine on - is it possible? For example, the battery took not the overnight - don't know why. This was 6% this morning. Left the machine for an hour and it was up to 81%. I used it for another hour and it is up to 95%

    Moreover, I am in Egypt, where power cuts are terrible. I don't know if it is safe to run on power just with a surge protector or battery. Any advice?
    (Electricity cuts have already had on my CD player, coffee machine and railway even if they were all on the surge protectors low level).

    Post edited by: kateinegypt

    Hi Kate,.

    First of all, I highly recommend you a surge protector for your laptop, in fact I recommend to any PC anywhere.

    As for your battery charging, I knew this type of behavior when the laptop is connected to an AC power but still the battery will discharge. In my experience, this is caused by a passenger (fraction of a second) power loss of AC that causes the microcontroller to power switch to battery even though normal AC power is connected.

    The only way I found of reactivating a correct diet is to turn off the laptop and then put on as usual.

    I suspect that your laptop is affected in the same way.

    Good luck

  • hard drive failure and replacement of the laptop pavilion dv6-1000

    It seems that the hard drive has failed in the laptop.  When I run a test gives me a message 3f0 and hard drive does not exist.  Tried to start the repair system and the operating system not found.  Would fix with the image of the system.  No found boot device.  Conclusion: new hard drive required.  The laptop drive is a seagate momentus 320 GB 5400,6.    Do I have to replace it with a new seagate or can I use a Western Digital with the same 320 GB, 5400 rpm?  Thank you in advance.

    Hello:

    WD should be fine and if you want to use a disc 7 200 RPM faster seek time (at a small cost of battery life between charges) you can go with this too.

    Paul

  • LabVIEW 6.1 and 2012 at the same computer problem

    Hello world.

    I've been using Labview 6.1 for a while and it worked fine for me.

    I recently installed Labview 2012 on the same computer and looks like the serial port of functions do not work properly. Whenever I try to open an example of VISA communication, labview freezes.

    I guess it's because even though I can install two versions of labview in the same computer, the drivers can be installed once correct?

    But I thought that labview 6.1 and 2012 may share the same VISA driver.

    Is there a way I can resolve this problem with versions of labview works correctly?

    Thanks in advanc.

    The LabVIEW and VISA compatibility chart is here. As you can see, there is no version of NI-VISA which is compatible with the two 2012 and your old 6.1. Indeed, the graphic poster not only any version of older than 7.1.1 LabvIEW.

Maybe you are looking for

  • great solution to consider.

    How to complete the project?

  • Can I delete the OS 9 in my applications folder

    I'm trying to remove the old files. As I have now El Capitan, is it OK to remove the OS 9 of my applications folder?

  • Laptop HP Mini with Xp - blue Dump 210-1000

    Dear all Good afternoon r v bleed blue Tried on: (a) tried to do a fresh install of Xp CD after copying the files, when define us windows starts - new blue dump (b) removed, cleaned and mounted RAM at the back (c) replaced RAM with another OK one - s

  • Introduction to Communication systems - examples of lab - files

    Hello I use NI 2901 to check the experiences in the book Introduction to Communication systems, Bruce A. black. The problem is that I couldn't find the files of experience mentioned in Book VI. At the beginning of the book it is said, download the fi

  • 5922 phase coherent continuous acq

    Hello I have several 5922 scanners that I need to configure for consistent continuous signal phase acquisition, but so far I've succumbed. Their example clocks are synchronized, but the best that I got is with the "synchronizationtart Trigger (Acq.»