Battery Bluetooth Toshiba v Vodafone Remote Access Card

Similar Questions

• Stack bluetooth Toshiba occasionally prevents shutdown / restart / logoff

  Hello!

  Sometimes when I try to stop / restart / disconnect my M70 satellite it just does not react without any error message. The only way around this problem is to perform a forced shutdown of shell command "shutdown-s-f" with administrator rights.

  In the application event log, I see the following error message:
  =========================================
  The security descriptor of the application to the Server COM C:\Program Files Toshiba Stack\TosBtSrv.exe application-specific access is invalid. It contains entries of access control with permissions that are not valid. The requested action was therefore not. The application assign this permission of the security program; to change this security permission contact the vendor of the application.
  =========================================

  I integrated module bluetooth onboard, XP Home, with the new battery bluetooth Toshiba page.

  I couldn't set up my computer to use MS bluetooth stack. The solutions proposed on this forum has not worked for me.
  I tried to reinstall the toshiba bluetooth stack a couple of times. Without battery installed stop BT works very well.

  Suggestions how to fix this would be welcome.
  Thank you

  You have special firewall blocking parts of the application?
  What happens if you turn the server part of series the battery COM in
  -Mouse-right click on the Bluetooth icon on the systray-> Options...-> general: turn the Bluetooth Services: Bluetooth COM Port Service (uncheck)
  Reset
  Reboot-> problem still occur?

• Still problems with the adapter Bluetooth Toshiba Windows 7

  Hey there, it's me again.

  I am referring to my 'Problem Bluetooth on Windows 7' subject:

  I thought after the solution of bluecat that my problem has been resolved. But it isn't really.

  After you install the Windows fix, it worked just a short time. But now the problem is the same.

  When I remove the Toshiba Bluetooth Stack and try to work with Manager Bluetooth of Windows, I see that the Bluetooth icon is to come and one to go on the taskbar. In Device Manager, I said Windows, that it is not closed the device to save power. But I think that the device is on and walk and stop...

  I really absolutely have no idea what is the problem, but I get terribly angry.

  Details:
  Windows 7
  Dell Wireless Bluetooth internal adapter 350 (but it is manufactured by Toshiba)
  Experienced pilots: Vista Pack of profile of the Dell homepage (no battery installed, driver only) / Toshiba Bluetooth Stack (the latest version)

  This is the old thread:

  Hi all

  Just as I installed Windows 7, my keyboard and Bluetooth mouse do not work very well.

  I use the Dell Wireless 350 Bluetooth internal adapter, Toshiba Bluetooth Stack 8.00.02 and the keyboard and mouse Logitech MX1000.

  To connect the devices on my computer, I first have to disconnect the Bluetooth adapter by pressing Fn + F2 on my Dell i9400, after re-login I can search and connect devices correctly. They work fine as long as the laptop is running.

  After restarting the laptop, devices no longer work. They are still in the known, but not connected Bluetooth stack. That's why I have to unplug the adapter Bluetooth, another time and reconnect in order to connect the two devices.

  I first thought, it's a Windows problem. I thought that Windows is able to ask the adapter to save power. But when I go to Device Manager, there is no box for this option, as known from other devices (Te USB Ports). If this isn't the problem. I think the problem is something else, maybe performed by the Bluetooth stack.

  Windows XP it worked perfectly. I used the same hardware and also the battery Bluetooth Toshiba (uploaded on the homepage of Dell).

  Someone at - it ideas?

  Thank you!

  Daevu

  Hey there

  Yesterday I did Format C: and installed Windows 7 news.

  I do not have a bluetooth driver for my Dell Wireless 350 Bluetooth adapt (made by Toshiba).

  And now: the mouse and the keyboard work. I even do not see anywhere in my system, but they work.

  There is no bluetooth adapter in my device manager and I had do not connect the keyboard and mouse with my computer. She simply do nothing.

  I do not understand this...

  What is a backup connection?

  What I tried:
  -> Installation more recent Bluetooth Stack from Toshiba. Problem in the above message. I also installed the MS Hotfix. The same problem.

  -> Installed "Vista profile Pack" on the home page of Dell, recommended for my laptop and Windows Vista. There is no battery installed. So I had to connect the mouse and keyboard via the Windows Bluetooth Manager. But the adapter was performed on and off windows, the icon in the task bar came and went and came and went. Connection is good, 1 minute then a few seconds. Not possible to work with the mouse.

  And now, without having to install a driver, it works. Am I stupid?

  Daevu

• Battery Bluetooth for Windows by Toshiba v4.00.30 (T)

  I have a 6100 SatPro with internal Bluetooth. WinXP SP2.
  I recently received an email from Toshiba saying that a new Bt stack was available. I tried to install it. I have now no BT operation. There is now no mention of Bt in Device Manager (Nothing in USB, (COM + LPT) Ports or network Adapers controllers). However, there is an unknown - SiW. There is an entry in START - all PROGRAMS - BLUETOOTH TOSHIBA STACK; However, when I try to use Bluetooth Service Centre for example, I get a message telling me that Bluetooth is disabled - this isn't.
  It seems to me that when the battery is installed the device driver is not - HELP!

  The installation was successful? This means did you wait until the installation is completed?

• Power failure during the use of Vodafone 3 G card - Equium M50

  Can anyone help me please with a problem?

  I recently bought a laptop Equium M50 to help with the work. At the same time, I bought a Vodafone 3 G data for mail recovery card electronic remote access, etc. Whenever I plug the 3G card into the appropriate slot, the laptop turns off completely. Sometimes, I am able to get a connection to the net, but in the minute of connection, the power to the laptop shuts down.

  I returned the card 3G to be informed that it works very well, I got a verification of diagnosis by PC World and they inform me that there is no problem with the laptop
  I was advised to update the BIOS that I did and realized all of the Windows updates. The problem remains though.
  I would appreciate help with this query. Everyone knows a similar problem?

  Thank you very much
  Stu

  Hello

  I heard about some problem with card Vodafone and models of Toshiba laptops. The problem must be card and a cell phone. Please contact Vodafone and check if they have a few updates available.

  Toshiba can't do anything with it. In my opinion, if the laptop slot works well there is end of liability of the manufacturer for laptop.

  Good bye

• Homekit remote access does not

  Hello.

  I have a Schlage door sense block 100% functional when connected by bluetooth with my iphone (ios 10) either when I m with the sense or Homekit app it management.

  The problem starts when I try to work remotely.

  Yes:

  (1) my 3rd generation Apple TV (Maj) is connected with the same iCloud account that I use in my other devices, including my iPhone

  (2) Apple TV shows as 'connected' when I check my hub within the Homekit app status

  (3) Apple TV is "always on."

  (4) I tried to connect a disconnect in icloud again several times.

  Need help please!

  I chose this lock exclusively to access remote homekit.

  Thank you!

  It seems that the fault is in schlage's recent firmware update.  They have posted the following on their web site about seven 18, 2016:

  Some clients of Schlage sense suffered a loss of access remotely through the 3rd generation Apple TV after update of their lock to the version of the firmware 3.42.

  We are aware of the problem and are working quickly to resolve.

  In the meantime, you can learn more details about how to set up an Apple TV and iPad for remote access and automation of your Schlage lock and other accessories HomeKit.

  http://Unlock.schlage.com/blog/unlock-Schlage/Schlage-sense-and-remote-access-th rough-apple-tv

• NB100 supplied with Bluetooth and the slot for sim card

  I wonder what model come with bluetooth and the slot for sim card,.

  The NB100? Have a look at the brochures on the Toshiba site.

• NB - remote access is not possible

  I have a remote that gives me a secure access to the server from my employer, so I can work from home through my netbook.
  However, I can connect to my place of work, but when I try to access the foldersand, click the icons I get a message that says: this action is only valid for products that are currently installed.

  The remote access works without problem, when I use it with my AppleMac which is in the same room.
  I'm not familiar with the PC, so do not how to solve this problem.

  Hi Monkey_1,

  To be honest, this remote control software does not know about me, and I've never heard.

  I think the best idea would be if you contact the local administrator of your company or the manufacturing of this software. Here he s a user to user form on Toshiba laptops and I doubt anyone can help you in this case.

  Normally, such software will install the directors of the company and you must ask him about it!

  Good luck! :)

• Error message with program battery bluetooth and tecra 9100 XP SP2

  When I try to start program battery bluetooth the following error message appears:
  the instruction at "0x1000bf18" uses the address "0x0015d000". memory don't pet not be "read".

  Is someone can tell me, what kind of question is this and how to fix it?

  Thank you very much in advance

  Hi Patrick,

  For the benefit of other users of the forum please let me translate your error message: -.

  ""The Instruction at "0x1000bf18" uses the memory address"0x0015d000". Cannot read memory.

  This indicates that the broadcast program has stored the second addresses two memory as a place in which it writes data and now cannot read the data at this location memory.

  It may be because some other routine wrote too much memory or reported to this place as "in use".

  Windows will normally prevent such a situation from occurring, but being Microsoft is not infallible and errors may occur from time to time.

  If you get this message every time that you start your battery Bluetooth, it is more likely to be a problem with the Bluetooth program badly to access its memory cache, so I recommend reinstalling the Bluetooth program.

  Good luck

  HTH

  Post edited by: NickyNoogle

• I gave remote access to a scam.  What should I do?

  I was on my computer when I got a message saying that my computer has a virus.  I couldn't use the mouse, or close the session.  My system froze.  I was told to call the number on the screen.  When I did I gave them remote access.  Pretty quickly, I knew it was a scam but they dial for a few minutes.  Should I be worried?  The scam was supported IT Aspire.

  Completely erase your hard drive and he re-partition. Reinstall a new copy of OS X. change all of your passwords. Report it to your banks and credit card companies. You can just for the re - issue new credit cards.

  A good rule to follow: If you don't know what is on the other end of a web link, then don't click it. There is no real viruses affecting a Mac, as update you OS X means that you should go to El Capitan to protect against the latest RansomWare - KeRanger.

  Identify the fraudulent email 'phishing '.

  Beware of the local browser Tech Support, Phishing scams

  Remove the browser pop up problems

  Malwarebytes | Free Anti-Malware detection and removal of software for

  Apple Macintosh computers

  Adblock more 1.8.9, GlimmerBlocker, or AdBloc k

  Remove the adware that displays pop-up ads and graphics on your Mac

  How to remove adware FlashMall of OS X

  Stop advertising and pop-up advertising windows in Safari - Apple Support

  2.11 DetectX

  Useful links about Malware problems

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty of pop-ups in browser that support Safari.

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

• Sat Pro A60 - screen backlight turns off after the connection with the Vodafone 3g data card

  I have a Sam Pro A60 which took a mounted Vodafone 3g data card. It connects OK data card but then the screen becomes 'empty' you can see the icons if you get the light from the window in the right direction, but permanently unusable.

  A reboot and the screen comes back. Are there keys, I can try to put light or ideas to test if it's a hardware or software problem?
  Thanks in advance.

  Hello

  It s a very strange problem. But I'll try my best ;)

  I noticed a similar problem on my second book. The display light didn't stop but the blue screen of death (BSOD) appeared and I could not continue my work.

  After a lengthy investigation, I found some useful tips.
  Someone told me that I have to disable HT technology (Hyper-Threading Technology) in the system BIOS settings.

  It's a key!

  As I remember the Satellite Pro A60 also supports this Hyper-Threading Technology.
  You can disable this function in the Toshiba HWSetup tool, in the CPU tab.

  Check it out and maybe it's a key as in my case.

  Dude good luck

• Satellite M60-148, vodafone mobile connect card

  Unable to connect a vmcc vodafone mobile connect card to my satellite M60-148 (new model 17'). OK for the software, ok for the vodafone window, but could not get the window with the PIN code. The same card vmcc works with my old toshiba laptop satellite series (win 98)

  Hi Chrise

  It seems that this is not a problem of the operating system.
  Have you installed the software drivers?
  On the manufacturing site, I found some info.

  Please take a look at this link

  upport of http://www.Vodafone.com.FJ/index.cfm?Go=VF.businesssolutions&cmd=businessvmcs

  Let me know if you succeed.

  Best regards

• Remote access for PXI with DAQmx

  I have a PXI chassis with a real-time embedded (PXI-8186) controller and some modules DAQ (PXI-6259) x 2. I've been programming this via LabWindows with a kind of client-server of RT - UI thing by using network variables and others. For some applications, it would be enough and more convenient to be able to interact with the PXI hardware directly from a connected PC network DAQ.

  The controller running a VISA server, it seems that I could connect to a remote machine with a kind of viOpen ("visa://pxi.somewhere.com//PXI0::15:INSTR"); ") and then contact a particular data acquisition card. But I can't find any information on the programming of the 6259 in any way other than DAQmx or similar.

  First question then: is the interface PXI - 6259 VISA described anywhere?

  More practical would be to continue to use DAQmx, through something like DAQmxCreateDOChan (taskHandle,"pxi.somewhere.com//Dev1/port0/line0:4",...)

  I found references to what we call 'Remote access appliance', for example:

  http://digital.NI.com/public.nsf/allkb/5CC9792C6CD4A34C862565BC0072D5DF

  that seems to put in place something equivalent, but I don't find it to watch it in MAX:

  Start-> all programs-> National Instruments-> NI - DAQ-> the remote device access server

  and I've seen suggestions that maybe it isn't that for traditional DAQ or only pre 7.0, or in any other way was no longer applicable.

  Second question: "Remote device access" are always and how to I install/activate it on my PXI controller?

  Someone at - it clues as to the foregoing, or any other way to get the same kind of features?

  Thank you

  Mike Schacht

  LANL

  Hello Mike,.

  Remote device access was a feature in NOR-DAQ traditional long just now.  This feature was not worn on OR-DAQmx because the framework it was built on does not really correspond with the need of modern times for network security.

  Unfortunately, there is no functionality you describe by saying to DAQmx.  Currently, this type of control is limited to deploying applications to the target of RT.  While the VISA is used for some parts of the DAQmx interaction, these function calls are not documented.  Someone else on the forums may be able to help if they tried to implement something like this in the past.

  Good luck!

• Routing and remote access - on three subnetworked, two subnet unable to reach to the internet!

  Hello

  Good evening everyone.

  I had a problem in Routing and remote access on windows 2003 server.  This server is already configured as a file server, domain server, and application server. Also configured as a router (thanks to access routing & remote) to connect the three different networks with each other. If this server has three NICs installed and each separate NIC network cards represent.

  three different networks are - 192.42.160.0/24, 192.42.161.0/24, 192.42.162.0/24

  Three cards of the NETWORK adapter installed on the server as with the IP - next

  NIC - 1 = 192.42.160.220, Sub - 255.255.255.0, gateway - No.

  NIC - 2 = 192.42.161.220, Sub - 255.255.255.0, gateway - 192.161.220.112 (this ip address for internet access then 4 g router IP)

  -3 = 192.42.162.220, NETWORK cards, Sub - 255.255.255.0, gateway - No.

  Now the question is I can get Internet & (also scathing in router ip 192.42.161.112) one network i.e. - 192.42.161.0/24, BUT when I try to access the internet from another two network (192.42.160.0/24 & 192.42.162.0/24) I can not access and in addition can not ping to internet router ip - 192.42.161.112...

  So, how do I access the internet to another two network also?

  I was already the configuration of static routing for all three network but I wasn't always successful. I don't really know what exactly static routing this should be done in access routing & remote area so that all three network can reach to the internet?

  Here is the result of the current track...

  D:\Documents and Settings\Administrateur > route print

  IPv4 routing table
  ===========================================================================
  List of the interface
  0x1 ........................... MS TCP Loopback interface
  0x2... 00 30 05 8f ad 5 c... Broadcom NetXtreme Gigabit Ethernet - Mi Teefer2
  niport
  0 x 3... 0E 00 c4 f8 a7 0c... Network Intel(r) PRO/1000 GT Desktop Adapter - Teefer2 M
  iniport
  0 x 4... 0E 00 0c a7 c5 85... Intel (r) PRO/1000 GT Desktop Adapter #2 - Teefer
  2 miniport
  ===========================================================================
  ===========================================================================
  Active routes:
  Network Destination gateway metric Interface subnet mask
  0.0.0.0 0.0.0.0 192.42.161.112 192.42.161.220 1
  127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
  192.42.160.0 255.255.255.0 192.42.160.220 192.42.160.220 20
  192.42.160.220 255.255.255.255 127.0.0.1 127.0.0.1 20
  192.42.160.255 255.255.255.255 192.42.160.220 192.42.160.220 20
  192.42.161.0 255.255.255.0 192.42.161.220 192.42.161.220 20
  192.42.161.220 255.255.255.255 127.0.0.1 127.0.0.1 20
  192.42.161.255 255.255.255.255 192.42.161.220 192.42.161.220 20
  192.42.162.0 255.255.255.0 192.42.162.220 192.42.162.220 20
  192.42.162.220 255.255.255.255 127.0.0.1 127.0.0.1 20
  192.42.162.255 255.255.255.255 192.42.162.220 192.42.162.220 20
  224.0.0.0 240.0.0.0 192.42.160.220 192.42.160.220 20
  224.0.0.0 240.0.0.0 192.42.161.220 192.42.161.220 20
  224.0.0.0 240.0.0.0 192.42.162.220 192.42.162.220 20
  255.255.255.255 255.255.255.255 192.42.160.220 192.42.160.220 1
  255.255.255.255 255.255.255.255 192.42.161.220 192.42.161.220 1
  255.255.255.255 255.255.255.255 192.42.162.220 192.42.162.220 1
  Default gateway: 192.42.161.112
  ===========================================================================
  Persistent routes:
  None

  Sorry if I'm not able to explain properly. Please let me know if you have to explain more about it...

  Thank you all.

  Mahesh

  Hello Manu,

  Please post this question in the forums TechNet for Windows Server 2003. They will be able to guide you further.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

• remote access VPN not connected - no access inside

  Hi, I have successfully configured remote access VPN router, it is connected, but no access to the inside, none of my ip addresses. I do not know SPLIT_ACL is ok and I've denied NATting them. For me, everything is ok. I did a lot in ASA, without anyproblem. Thanks for the comments.

  enable secret 5 $1$ y0AJ$ rhrjbrpe5NDiAyHGlfeNi.

  !

  AAA new-model

  !

  !

  AAA authentication login bcc_users local

  AAA authorization bcc_group LAN

  !

  crypto ISAKMP policy 10

  BA aes

  preshared authentication

  Group 2

  !

  ISAKMP crypto client configuration group ra_vpn_bcc

  key *.

  DNS 8.8.8.8

  bcc.local field

  pool vpn_pool

  ACL SPLIT_ACL

  Max-users 7

  netmask 255.255.255.0

  !

  !

  Crypto ipsec transform-set RIGHT aes - esp esp-sha-hmac

  tunnel mode

  !

  !

  !

  Crypto-map dynamic dynmap 10

  Set transform-set RIGHT

  market arriere-route

  !

  !

  card crypto client CRYPTO_VPN of authentication list bcc_users

  card crypto isakmp authorization list bcc_group CRYPTO_VPN

  crypto card for the CRYPTO_VPN client configuration address respond

  map CRYPTO_VPN 10-isakmp ipsec crypto dynamic dynmap

  !

  !

  interface GigabitEthernet0/0/4

  IP address %.

  NAT outside IP

  auto negotiation

  BFD interval 50 50 5 min_rx multiplier

  card crypto CRYPTO_VPN

  !

  !

  IP local pool vpn_pool 172.31.255.0 172.31.255.250

  NAT extended IP access list

  deny ip 10.0.0.0 0.255.255.255 172.31.255.0 0.0.0.255

  deny ip 172.16.0.0 0.0.255.255 172.31.255.0 0.0.0.255

  deny ip 192.168.0.0 0.0.255.255 172.31.255.0 0.0.0.255

  IP address 172.16.0.0 allow 0.15.255.255 all

  IP 192.168.0.0 allow 0.0.255.255 everything

  IP 10.0.0.0 allow 0.255.255.255 everything

   

  SPLIT_ACL extended IP access list

  IP 10.0.0.0 allow 0.255.255.255 172.31.255.0 0.0.0.255

  IP address 172.16.0.0 allow 0.0.255.255 172.31.255.0 0.0.0.255

  IP 192.168.0.0 allow 0.0.255.255 172.31.255.0 0.0.0.255

  Take a look at the delivery.

  You do not have a route to the VPN pool on a nearby device.