Battery change.
Hi, I'm Alessandro and I'm almost crazy with a very simple thing!
Where can I buy a new battery for my
Entertainment laptop HP Pavilion dv6-1350sl
Model: VS037EA
He's old enough, I bought in 2009. But it works fine (for my use!) and I would just replace the cause of the battery as the original no longer works.
We should I buy (on my battery label that says: replace of SPARE HP 484170-001 or more numbers!) and where?
I really want to thank someone could help me to solve this simple problem!
Ciao, Alessandro
Just contact HP at 1800-474-6836 and provide the model number of the computer or replacement part number and they could help you.
Tags: Notebooks
Similar Questions
-
Alarm began some time ago. Enter laptop makes at startup, ok. Internal battery changed but still gets the same alarm.
Battery type CR2032. Ran that test battery had failed Id 6C757T-5417NN-XD003G-C0BX03 primary SCHOOL.
Bought the dv6 2010.
Hello
First error 601 internal battery is not for the RTC battery, it's for the main battery. You need to perform a test, if you need to replace the main battery.
http://support.HP.com/au-en/document/c00821536
Kind regards.
-
Phone locked after battery change
Hello world
I replaced my battery on my 3 g phone and now everything is gone and I get a connect to the iTunes message? Help, please
Thanks in advance
Looks like you screwed up when you changed the battery.
Now that you've opened the iPhone that apple will have nothing to do with it once again.
-
BATTERY CHANGE CMOS ON ASPIRE M3200 NOW GET WARNING "OPEN CHASSIS. ANY HELP TO SOLVE?
Acer Aspire M3200
Recently changed CMOS battery due to loss of date however now keep wake up American Megatrends 'Chassis opened warning' at startup.
Have tried to reset / disable in the Bios but not listed is not in the tabs on the security features and Integrated Peripherals.
Suggestions as to how I can reset so that I can boot without having to go through the loop of the AMI Bios!
Thanks in advance.
This gives a glance,
-
HP Wireless Bluetooth Z5000 MB: Stopped my mouse clicking after battery change wireless
I was using the mouse Bluetooth Z5000 successfully for about 5 months until that the battery needed to change. Now the mouse does not control as he did, that is, a discreet, noterrtic, and surface mouse click not at all. A little help, please?
Hi @Justjoan123,
Thank you for your update.
I suggest you contact HP support for further assistance that you have excluded from software.
Please contact HP to Contact HP Supportassistance.
Please update me the results.
Thank you
-
3750 stand-alone switch battery change error message displays
We have some 3750 autonomous through our network. IT restarts automatically. through the history of logging, it shows Stack_Link_Change message but this switch is autonomous.
---------------------------------------------------------------------------------------
C3750-1 # sh version
Cisco IOS software, software C3750 (C3750-IPBASE-M), Version 12.2 (35) SE5, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Updated Friday 19 July 07 19:15 by nachen
Image text-base: 0 x 00003000, database: 0 x 01080000ROM: Bootstrap program is C3750 boot loader
BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M), Version 12.1 (19(r)) EA1b, VERSION of the SOFTWARE (fc2)The availability of C3750-1 is 3 hours, 11 minutes
System to regain the power ROM
System restarted at 23:22:58 GMT Monday, August 8, 2011
System image file is "flash: c3750-ipbase - mz.122 - 35.SE5.bin".Cisco WS-C3750 - 24 p (PowerPC405) Prozesseur (D0 revision) 118784K / 12280K bytes of memory.
Card processor ID CAT0847N0Y3
Last reset of tension
4 virtual Ethernet interfaces
24 FastEthernet interfaces
2 gigabit Ethernet interfaces
Password recovery mechanism is activated.512K bytes of memory simulated by flash not volatile configuration.
Basic Ethernet MAC address: 00:12:80:65:94:00
Number of the motherboard: 8312-73-05
Power supply part number: 341-0029-03
Motherboard serial number: CAT08470DDE
Power supply serial number: LIT0841015S
Revision number of the model: D0
Motherboard revision number: A0
Model number: WS-C3750-24PS-S
System serial number: CAT0847N0Y3
Top Assembly part number: 800-21982-02
Top of page revision number of the Assembly: B0
Version ID: n/a
Revision number of hardware consulting: 0x0ASW Version SW Image model switch ports
------ ----- ----- ---------- ----------
* 3 26 WS-C3750 - 24 P 12.2, C3750 SE5 (35) - IPBASE-MConfiguration register is 0xF
---------------------------------------------------------------------------------------------------------------
C3750-1 #sh logging
* Mar 1 05:00:33: % SYS-5-CONFIG_I: configured from the system memory
* Mar 1 05:00:33: STACKMGR-5-SWITCH_READY %: switch 3 is READY
* Mar 1 05:00:33: STACKMGR-4-STACK_LINK_CHANGE %: battery Port 1 3 switch has changed state down
* Mar 1 05:00:33: STACKMGR-4-STACK_LINK_CHANGE %: battery Port 2 switch 3 has changed state down
* Mar 1 05:00:34: % STACKMGR-5-MASTER_READY: Master Switch 3 is READY
* Mar 1 05:00:34: % LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan10, state change downstairs
* Mar 1 05:00:34: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Vlan48, change of State down
* Mar 1 05:00:34: % SYS-5-RESTART: System restarted.
Cisco IOS software, software C3750 (C3750-IPBASE-M), Version 12.2 (35) SE5, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Updated Friday 19 July 07 19:15 by nachen
* Mar 1 05:00:34: % SNMP-5-start COLD: SNMP agent on host C3750-1 shall be the subject of a cold start
* Mar 1 05:00:35: % LINK-5-CHANGED: Interface FastEthernet3/0/22, changed state down administratively
* Mar 1 05:00:35: % LINK-5-CHANGED: Interface Vlan1, changed state down administratively * Mar 1 05:00:33: % SYS-5-CONFIG_I: configured from the system memory
* Mar 1 05:00:33: STACKMGR-5-SWITCH_READY %: switch 3 is READY
* Mar 1 05:00:33: STACKMGR-4-STACK_LINK_CHANGE %: battery Port 1 3 switch has changed state down
* Mar 1 05:00:33: STACKMGR-4-STACK_LINK_CHANGE %: battery Port 2 switch 3 has changed state down
* Mar 1 05:00:34: % STACKMGR-5-MASTER_READY: Master Switch 3 is READY
* Mar 1 05:00:34: % LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan10, state change downstairs
* Mar 1 05:00:34: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Vlan48, change of State down
* Mar 1 05:00:34: % SYS-5-RESTART: System restarted.
Cisco IOS software, software C3750 (C3750-IPBASE-M), Version 12.2 (35) SE5, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Updated Friday 19 July 07 19:15 by nachen
* Mar 1 05:00:34: % SNMP-5-start COLD: SNMP agent on host C3750-1 shall be the subject of a cold start
* Mar 1 05:00:35: % LINK-5-CHANGED: Interface FastEthernet3/0/22, changed state down administratively
* Mar 1 05:00:35: % LINK-5-CHANGED: Interface Vlan1, changed state down administrativelyThe bugs that I've provided are also associated with stand-alone switches, I can't share bug internal details.
I've seen this problem before, & I understand that it is a standalone switch.
Most of the time that it would be because ports of defective battery which can not really be detected there software. I also looked at the case attached to the bug & found a few similar cases.
-
I ordered a battery of Zire 72 on Ebay a long time ago and cannot find anyone in Calgary to change for me. I tried it myself, but I can't get the body pried share must have needed a special tool.
The closest I have so far, is a battery shop who asked me to leave with him during the night (not interested in it) and Best Buy, who said they might be able, but cannot guarantee.
Anyone know where I can go to get this service?
pdaparts.com offers videos of 'takeapart' for Palm devices.
You don't need a special tool, just a little more "punch". It is aligned together quite firmly, that you just have to overcome the tabs in plastic that keep.
WyreNut
Message relates to: Centro (AT & T)
-
HP Compaq 8100 small Elite for: CMOS battery change
What battery I need to buy to replace battery CMOS (lose the BIOS date/time).
All traps to replace?
@LechKL, welcome to the forum.
Here are the computer hardware reference Guide . On Page 46, you will find a guide to replacing the battery. Read this section very carefully. In most of the computers battery is a CR2032. The instructions state that you must use a spare battery supplied by HP. However, you can us HP Partsurfer to see if they recommend a battery.
The process should be simple. There are detailed photos to help you.
Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.
-
HP ENVY 15-K221NF - I7 - 8 GB: battery change
Hello
I got a HP ENVY 15-j164nf PC Portabla pc intel 5 (http://www.cdiscount.com/informatique/ordinateurs-pc-portables/hp-envy-15-j164nf-pc-portable-15-6-in... which was stolen during a robbery, this Friday, so I wanted to buy an equivalent model.) I discovered that one reconditioned and more expensive 50 this model HP Envy 15 laptop 15, 6-k221nf intel 7 (http://www.comparatif-ultrabook.fr/hp/envy-15-k221nf-2513 .html), which has similar features, EXCEPT for the battery which I use often. I pass a battery 6 cells 61wh holding 5 hours for a 4-cell 41wh...
Fortunately they have not stole my old pc battery
Don't you think that it is compatible with this new model? I'm wondering, since these are the same models.
Thanks in advanceHello @qr75003,
Welcome to the Forums of HP Support!
I read your post about the battery issue and wanted to help you!
I took a look at the two models, and it does not seem that the battery fits the new model. All batteries supported for the new model are:
HP ENVY 15 Notebook PC - Maintenance and Service Guide (Chapter 1, Page 4).
Supports the following batteries:
● 4 - stack - 41 w/h (2.8 Ah), supports a fast charge
● 4 - stack - 48 w/h (3,2 Ah), supports a fast charge
Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek. In addition, by clicking on the Thumbs up below is a great way to say thank you!
Have a great day!
-
ARC mouse doesn't respond better after battery change
I used my Arc mouse for about 3-4 months. I replaced the batteries a couple of times during that period and had to be replaced again this morning. The LED on the device still lights up green to indicate that it has a complete autonomy, and windows (7 RC, build 7100 64-bit) emits a sound, grateful that she recognizes the USB receiver and mouse arc also appears correctly in the window "devices and printers". However, the cursor does not respond to the screen.I have tried all the USB ports on my computer, reinstalled the windows 64-bit version of intellipoint 7 and tried different batteries, but I still can't get the cursor to respond.The documentation on the site Web of Microsoft support said that the problem can be solved by re-synchronization of the device to my computer, but I am unable to find any kind of reset button on/inside the unit or on the USB receiver. What is the best approach to adopt from here to make my mouse working again?Hello
The mouse has the guarantee of 3 years and probably 90 days tech support from the date of
1st action. Call 1-800-936-5700 needed support.Click on the link located at the bottom of this page for warranty info - watch here for 3 years.
http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=114&active_tab=systemRequirementsARC Mouse
http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=114&active_tab=overviewMicrosoft Hardware Support - Troubleshooting - drivers & Software - register - contact us
http://www.Microsoft.com/hardware/en-us/supportOnline Assisted Support Options - Click Arc Mouse which is 1 on list now.
http://support.Microsoft.com/select/?ln=en-us&target=assistance&C1=502&x=10&y=11I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Battery problem, it recharges every few minutes
to start, the % of battery would stay in whatever it is turned on. Fully charged, it will stay at 100% until the Cup. When turned back on, it will display a different %.
There also restart every few minutes. I had changed battery, nothing works.
< published by host >
miraforeman wrote:
.. I had changed battery, nothing works. ..
If you had the battery changed by Apple, I suggest you contact Apple Support (mail service may be available) or make a booking Genius Bar in order to have your iPhone activated and in repair if recommended by Apple, (under warranty, if it qualifies):
- Contact - Support official Apple
- https://Twitter.com/applesupport
- http://www.Apple.com/retail/Geniusbar/
If you had the battery replaced, your iPhone may not fit for service by applying (whether under warranty or out of warranty service).
-
Satellite Z830 - battery discharge completely off
Hey,.
my battery has discharge even when the computer is started completely down and off. He did this for a few weeks now and it's every time.
Does anyone have the same problem?
And someone has a solution, apart from having the battery changed? Problem is that I can not send the computer for service when I write my thesis about it.Thanks for your help
J.
As far as I know, it is normal that the battery loses a few percent of capacity during the night. The same thing happen on my laptop.
Anyway, check it please follow document http://aps2.toshiba-tro.de/kb0/FAQ9C015N0001R01.htm
-
replacement battery free iphone5 but they sent me a Bill
Yesterday I called help for free replacement of battery for Iphone 5 program, after checking that I was eligible for free battery change, I made an appointment on the Apple store for today. I just returned home and now I received an email telling me I have to pay an invoice! ? I left my phone at the store and I have to come back on Monday to get it. Is this a normal procedure to automatically send a Bill, even if the replacement is free?
Why 'they' would send you a phone?
There is nowhere enough information in your title
-
How long should the battery last in a Satellite A300D
Can someone let me know how long my battery should last a Satellite A300D?
It has been in my possession the two days of the new?Hello
First of all, you know that a lifetime battery changing and depends on the use of the laptop.
So, if you scale DVD or / and game play the battery needed to dump a lot faster than the execution of some common applications like Word, IE, etc.In addition, there are different batteries with different specifications, as the battery 6 cells needed to dump as soon as a battery 9 cells.
That is why it s is not easy to say how long a battery should last, but usually you can use the laptop with battery for about 1.5 hoursSee you soon
-
Satellite Pro L300-128 and battery life
Hello
I checked the specifications of this laptop but cannot find the medium-term on a full battery.
Although this would depend on its use, but what about the generalization? Say, surfing the web, by email or word processing?Does anyone know this information? Or suggest that it could be?
If so, pls reply. Thank you very much!
G
Hello
I think you can run Notepad on the battery power more than one hour.
But as you have already said, battery working time depends on the use of the laptop. If the battery performance can change always and can be different.
If you wish, you can extend the performance of battery changing the settings in the power options.
A stronger battery could also allows to run Notepad as long on battery.If you wish, you can visit the European site of Toshiba-> Options & accessories for a stronger battery
Welcome them
Maybe you are looking for
-
On my old iphone 5, photo would be return and fill the screen when I turned my phone vertically to the horizontal. I can't do this on 6s. Any ideas?
-
Original title: where should I go to report a question regarding a problem with Windows Media Player? Hello - I just upgraded my RealPlayer and I discovered that I can't read http://217.147.235.114 or http://folkradio.ge stream in Windows Media Playe
-
Desktop shortcuts for items on the network sometimes drives disappear from the Office
I have a number of shortcut icons on my desktop Windows 7 (RC1) to the network elements - some are files on a NAS server, some are mapped as the floppy drives, etc. However, Windows 7 seems to sometimes simply remove all without notice, and I have to
-
Guest randomly repeat already played guest
Hi all Does anyone know if / how it is possible to prevent a container playing randomization mode prompt to repeat among the guests, when he played? Option is to play one of five different task queues in a random order while the appeal is pending, bu
-
Could not find the specific insertion code
Hi gurusI am using formulas of Oracle 10 g and stuck with one of the question, I just added a column block of control in my forms, I can see other articles as well in forms.Almost all the elements of this form of control are to be recorded in the dat