Battery drain even when the MacBook is stopped

Does anyone know why my now stopped even when Macbook battery drains. I loaded my MacBook to 100% this morning and in the afternoon when I turned it on, I noticed a drop of 2% in the State of the battery. I thought that the device using no power when turned off? No difficulty in this issue? He is the model of MBP mid-2012.

Perform a SMC reset and test again:

https://support.Apple.com/en-us/HT201295

Run Apple Hardware Test:

https://support.Apple.com/en-us/HT201257

Note that an error free AHT is inconclusive.

Ciao.

Tags: Notebooks

Similar Questions

  • Droid Razr Wifi battery drain even when off

    I just upgraded to Jelly Bean 4.1.2 4 days ago. I noticed that my percentage of remaining battery fell a little too quickly.

    In the battery usage screen, I noticed that wifi was consuming 8 to 12% of my battery use. Even if it's OFF, the automatic connect feature wifi was off, and the wifi symbol does not appear on the top bar.

    When I activated the wifi, it would normally connect

    In graphical battery level screen, the bar under the graph showing the duration of use of wifi, indicates the wifi on almost constantly even if wifi is turned off.

    The only time where the wifi bar shows a gap is when, after actually using wifi and I turned it off, it would interrupt its use but only for a few minutes at most before the bar itself turns on.

    I have attached a screenshot graphic. Each break in the bar wifi use means that brief or two minutes after turning off wifi before it turns somehow reignite.

    Airplane mode seems to be the only way to keep wifi active exhaust the battery out of my phone.

    Everyone has similar problems, or have any suggestions?


  • Laptop frequently is off and does not restart even when the Start button / stop is held in

    I have a notebook dv7-3060us running Windows 7, some mornings (every few days or weeks), I find, powered out and does not.  In press and hold the power button for 5-10 seconds has no effect.  I have to unplug and remove the battery to restart.  What happened several times.  I tried it with the battery removed, and it fails again, then.

    A software problem can cause this?  I thought that holding the power button causes a material interruption and the BIOS takes over.

    Is there a known hardware problem which can cause this?

    Thank you

    Adam

    Hi Sean,.

    Thanks for the suggestion.  Unfortunately, the steps listed for a hard reset was precisely what was needed to market every day.  So, we did about 50 times.  The real issue was whether a software problem could cause the phone to require a hard reset every time.

    After not getting no response for a few weeks, I have restored your computer from a backup, I made after the update in the first place and then re-set everything.  So far, it has remained stable, which brings me to the conclusion that it is, in fact, a software issue.

    Kind regards

    Adam

  • AC/battery lights - should they be lit even when the device is off?

    Hello
    Recently taken a U300. Can someone please help... are the AC / battery charge lights supposed to stay on blue all the time... even when the lid is closed and the unit is turned off (but still plugged?)
    Would appreciate any help
    Thank you

    Yes. If the laptop is turned off but connected to the power supply the two LEDs will be all the TIME.
    When you disconnect the power supply both will be OFF.

  • Satellite P855 - 10G is low on battery power, even when it is off

    Hello world

    I bought the Toshiba Satellite P855 - 10G, but I m terrified because he is low on battery power, even when it is off...
    Anyone know how I can fix the problem?

    Best regards
    Igor Tarelho

    Hello

    Access the BIOS and disable options like: wake-up on LAN and keyboard.
    In Toshiba HW Setup I should disable the USB Sleep and Charge feature as well

    The two options enabled to discharge the battery, even if the device is OFF

  • HP Pavilion DV7-2270 won't start. Even when it does it stops or BSOD comes up.

    Number and name of the product
    HP DV7-2270us

    Operating system installed
    64-bit Windows 7 Home Premium

    Error message
    Technical information BSOD

    STOP: 0X0000000A (0 X 0000000000000190, 0XFFFFF80003E8C65B, 0 X 0000000000000002, 0 X 0000000000000000)

    Question

    My laptop won't start and when it does stop down suddenly or BSOD screen comes up. My battery died and when the computer starts, it displays a message on this subject. I've updated the BIOS and driver software but could not solve this problem. It is used to run and operate perfectly. Help, please!

    Problem solved! A loose chip (graphics card) has been the cause of all the problems. My laptop works as fine as ever. It was also the problem of previous versions of the laptop dv6/7. So, you just need to check if the graphics chip is loose. If so, welding, it will allow to solve! Good luck!!

  • What should I do when the installation program stops at 39% and said "webget failed"?

    What should I do when the installation program stops at 39% and says "web get failed? I have a MacBook Pro.

    If you don't see that when downloading, either use another browser or use another (wired) connection and/or use a download manager.

  • My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green.  Wifi continues to operate even when the light is orange flashing.  Anyone know why this is happening?

    My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green. Wifi continues to operate even when the light is orange flashing. Anyone know why this is happening?

    The next time you see the flashing light amber...

    Open Finder > Applications > utilities > AirPort Utility

    Click on the image of the AirPort Express

    If you see a button update, click on update the firmware on the airport

    Otherwise, find status and click on the little orange dot it. A message will appear to say why the airport complained and suggest a remedy for the issue.

  • Fan of the cuts even when the machine is cool - Satellite P10 504

    Hello

    On my laptop cooling fan seems to cut in every minute or so, even when the machine is cool and not busy. It is not the quietest fan in the world, which is quite annoying!

    Does anyone else have any experience of this?

    Thank you very much

    Claire

    Hello
    have you checked the parameters energy saver? Normally, you can change the 'method of cooling' quiet.

    Good bye

  • I cannot download my purchase, even when the album said that has already been paid, what can I do?

    I cannot download my purchase, even when the album said that has already been paid, what can I do?

    What happens when you try to download it? And you try to download from the purchased for example section if using iTunes on your computer, click on your name / icon to the top right of iTunes then click purchased on the popup.

    If it does not show there then check if you have hidden it: mask and unmask purchases iTunes or iBooks on your Mac or PC - Apple support

  • How do 'Enum Control' disabled during the execution of an executable application and make activated when the application is stopped/abandoned?

    Hello

    I use a "Enum control" on the façade of an executable application built with application builder for LabVIEW 2013 full professional development system. I want Enum control remains activated prior to execution of this request so that I can choose any value from the list of available numeric values, but when I run this application; Enum control should become disabled so that the user can not select another value in the list of data during application execution values so that the default setting remains unchanged during the execution of this application. Enum control must also be activated when the application is stopped/abandoned so that the user can select any value.

    Could someone pls suggest a solution to this problem?  If I select the active state' to 'Disabled' in appearance tab then all listed values becomes disabled.

    Concerning

    Jamal

    I suggest to use the node property of persons with reduced mobility.  You can then disable the enum at the beginning of the program and then activate it in the judgment.

  • My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it

    Original title: HDMI sound

    I know that many have had problems, but I did not mine specifically. My HDMI connection was working fine with my laptop HP and m HD tv. I didn't use it for a while, now it is just the video, no audio on the TV. My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it. Ive read all the reviews and updates of pilot who was old. I don't know what else to do!

    Hello

    System Restore does not have this long period of time.

    You may want to refer to the suggestions in the thread below link and check.

    No sound via HDMI output portable computer connecting to TV

    I hope this helps.

  • I decided to do a clean install of windows 7, but when the disc it stops to extend windows files 0% I do not know why this happens is the drive.

    Original title: Windows 64-bit clean

    Ive recently done my 2nd attempt to install windows 7 64 bit and ive met the same problem, I have formatted and deleted all the data ln my drive hard amd decided to do a clean install of windows, but when the disc it stops expanding windows files 0% I don't know why this is happening is the disc

    You have all the features non-essential connected to the computer during installation? If you have external storage media connected, disconnect them.

    It is also possible to reinstall your Windows 7 media is corrupt. You can try to download a new copy and try again.

    How to: What are my options for Windows 7 reinstall media?

  • Creative cloud does not start starting system even when the option to do so.

    Creative cloud does not start starting system even when the option to do so.

    This is an open forum, not Adobe support... Click below to contact Adobe staff for help

    While the forums are open 24/7 you can't contact Adobe support at any time

    Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

    Don't forget to stay signed with your Adobe ID before accessing the link below

    Creative cloud support (all creative cloud customer service problems)

    http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  • I can't update the cloud even when the firewall is disabled

    I can't update the cloud even when the firewall is disabled

    Please read https://forums.adobe.com/thread/1499014

    -try some steps such as changing browsers and disable your firewall

    -also clear the cache of your browser if you start with a fresh browser

    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

    http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

    or

    A chat session where an agent can remotely look inside your computer can help

    Cloud creative support chat (all creative cloud customer service problems)

    http://helpx.Adobe.com/x-productkb/global/service-CCM.html

Maybe you are looking for

  • The weird keyboard on Satellite Pro L20

    I bought a new Satellite L20 here at the Kuwait, and I have the problem with the keys on the keyboard. Usually, it is SHIFT + 2 for ' @' character and it is how he has been informed on my keyboard, but the entry gives me the quotation marks ("") and

  • Cartridge number

    Could someone please tell me the correct number of cartridges for a HP Deskjet D4160

  • Re: Satellite A300-E00 - cannot download patches or updates

    Hey guys. My brother has an A300/E00. It connects to the internet (google, it can go on facebook, etc.) but it won't download patches or updates for games (wow, sc2) or software (adobe). This sounds like a hardware or software problem? It has not cha

  • Control arrays disappear when closing the window .uir

    Using LabWindows/CVI 2010, I created a program of simple test with a panel containing a couple of buttons push, three tumbleurs and three control LED. I can create arrays of controls containing the toggle switches and/or LEDs in the .uir editor and a

  • Synchronize external data

    Hello I'm new to BB, bought a BB Z10 and love Now to my question, I google and search here but cannot find an answer on how I can do a sync on contacts in places other than the integrated way (outlook, gmail, etc.). I would like to sync to the Member