Battery drains about 10%, while the laptop is turned off

I own a HP Pavilion Notebook PC m6, which is less than a month. Regularly, I charge my laptop at 100% before l ' switch off before unplugging. When I turn it back on (between 12 and 17 hours later), the battery has been drained with no provocation. What is a normal battery loss? If not, is it possible to stop this discharge? This laptop would lose so much energy in the first two weeks, when I've owned.

I just searched the forum for battery draining & there are a few other discussions that might also be useful:

Battery drain during Hibernation with Windows 7 Pro

important battery drain again sony vaio VPCEB1EOE during shutdown or Hibernate.

Why my battery drain 15-20% each new machine night Windows 7 nothing hip about

Hibernation my laptop battery drains

Tags: Windows

Similar Questions

  • Re: Satellite M30X - battery won't charge unless the laptop is turned off!

    Hello

    I have a Satellite M30X who is about 4 years old and all of a sudden, she stopped electric network load when the laptop is turned on but strangely fees - although very slowly - when it is turned off.

    Any ideas please.

    Thanks for your help
    Amanda

    Hello

    If you want and if you can, then you could try to replace the battery to check if this problem is related to a dysfunction of the accumulator.
    I mean your battery is 4 years old and it wouldn't be nothing unusual if your battery does not work as it should.
    My battery is about 6 years old and 3 years may not be loaded correctly.

    But note that these are only suggestions and if you want to be 100% sure, you should ask a technician for a detailed notebook check.

    Concerning

  • "due to an unidentified problem, windows cannot display windows firewall settings" fixed but still can not visit some sites and the laptop now turns off the coast on me. What should I do?

    I have an Apire one laptop with Windows xp service pace 3. I had to restore it to factory about 3 years ago. Some time after that the sound system began to slow and the Synaptics mouse stop working properly. I can move the pointer, but the left click does not work. It works in safe mode but not in normal windows. I used the Acer eRecovery for correct, but it did not work. I tried to download the driver for the mouse on the internet, but some how it could stop the download. I gave up at tring to fix. Some time in late March or early April, I couldn't access internet and after 22:30. I ran the diagnosis that is provided by internet explore and he said that the HTTP and HTTPS worked but the FTP did not work. AVG later told me my firewall is disabled and there was the possibility to reactivate it and I did. After internet explore stop allowing you to enter certain sites that I wanted to enter, I ran the Diagnostics again and he told me that a firewall client has been the cause of the problem. I tried to control my firewall setting, but had that "due to a problem not identified, windows cannot display the firewall settings". I thought AVG was the problem, so I have unintalled then he returned and attempted to access the firewall but got the same message. I typed in Google MySapce and found this site. I followed a few directions given to others in the thread started by joecarpenter33 and discovered that my firewall has been deleted and Base filtering engine has been deleted also. I downloaded and ran Malwarebytes ANti-Malware and SUPERAntiSpyware Free Edition and tdsskiller. MBAM has found a Trojan. The results of the analysis is less to:

    Malwarebytes Anti-Malware (Trial) 1.75.0.1300
    www.Malwarebytes.org

    Database version: v2013.04.10.14

    Windows XP Service Pack 3 x 86 NTFS (secure/setting network Mode)
    Internet Explorer 8.0.6001.18702
    Ziadie Berry: BERRY-LAPTOP [Director]

    Protection: disabled

    10/04/2013-17:44:54
    MBAM-log-2013-04-10 (17-44-54) .txt

    Scan type: quick scan
    Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
    Analyze the options disabled: P2P
    Objects scanned: 271656
    Time elapsed: 43 minute (s), 42 second (s)

    The process of memory detected: 0
    (No malicious items detected)

    Modules of memory detected: 0
    (No malicious items detected)

    The registry keys detected: 0
    (No malicious items detected)

    The registry values detected: 0
    (No malicious items detected)

    Registry data items detected: 0
    (No malicious items detected)

    Files detected: 0
    (No malicious items detected)

    Files detected: 1
    C:\RECYCLER\S-1-5-21-4674304-3331980883-3375822000-500\$7832f44fdd2ba165f6ea01bec7f363fd\n (Trojan.0Access)-> quarantined and deleted successfully.

    (end)

    Malwarebytes Anti-Malware (Trial) 1.75.0.1300
    www.Malwarebytes.org

    Database version: v2013.04.10.14

    Windows XP Service Pack 3 x 86 NTFS
    Internet Explorer 8.0.6001.18702
    Ziadie Berry: BERRY-LAPTOP [Director]

    Protection: enabled

    10/04/2013 23:43:49
    MBAM-log-2013-04-10 (23-43-49) .txt

    Scan type: quick scan
    Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
    Analyze the options disabled: P2P
    Objects scanned: 269636
    Elapsed time: 49 minute (s), 41 second (s)

    The process of memory detected: 0
    (No malicious items detected)

    Modules of memory detected: 0
    (No malicious items detected)

    The registry keys detected: 0
    (No malicious items detected)

    The registry values detected: 0
    (No malicious items detected)

    Registry data items detected: 0
    (No malicious items detected)

    Files detected: 0
    (No malicious items detected)

    Files detected: 1
    C:\WINDOWS\assembly\GAC\Desktop.ini (Rootkit.0access)-> quarantined and deleted successfully.

    (end)

    I ran the Diagnostics today after Internet explore and my other browsers stop allowing me to internet access. That's what came back:

    Diagnosis of last run time: 17/04/13 17:48:14 WinSock Diagnostic
    WinSock status

    attmpting error information to validate the Winsock base providers: 2
    error not all entries could be found in the basic services provider winsock catalog. A reboot is required.
    user redirection of information in support of the appeal

    Diagnosis of network adapter
    Network location detection

    Info to help home Internet connection
    Identification of network adapter

    Info network connection: name = Local, peripheral network connection = Realtek RTL8102E Family PCI - E Fast Ethernet NIC, MediaType = LAN, type = LAN
    Info network connection: name = wireless, peripheral network connection = Atheros AR5007EG Wireless Network Adapter, MediaType = LAN, type = Wireless
    Info both Ethernet connections and wireless available, ask the user for selection
    required user input action: select network connection
    Info Wireless connection selected
    State of the network adapter

    Info network connection status: connected

    HTTP, HTTPS, FTP Diagnostic
    HTTP, HTTPS, FTP connectivity

    WARN HTTPS: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
    warn HTTP: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
    warn HTTP: error 12029 connecting to www.hotmail.com: a connection with the server could not be established
    WARN HTTPS: error 12029 connecting to www.passport.net: a connection with the server could not be established
    WARN FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
    WARN FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
    error could not make an HTTP connection.
    error could not make an HTTPS connection.
    error could not make an FTP connection.
     
    Still, he remains connected to the wirelesss connection, but won't let me access the internet. Right now I use a proxy to help, but access to the sites are limited.

    I used the tweaking software and my firewall is back but, I have yet to visit some sites and the laptop now turns off by itself.

    Hello

    Follow these methods.

    Method 1.

    Start the computer in safe mode with network and run a full scan of computer viruses.

    To start the computer in safe mode: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

    Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

    Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

    Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

    Method 2.

    If the steps above do not help, then try to scan the computer using Windows defender in offline mode and check if that helps.

    Search for spyware and other potentially unwanted software: http://windows.microsoft.com/en-US/windows7/Scan-for-spyware-and-other-potentially-unwanted-software

    What is Windows Defender Offline? : http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline

    Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

    Method 3.

    You can create a new user account and check. Once the new user account works fine, then copy the data from the old user account for the user account.

    How to copy data from a user profile damaged to a new profile in Windows XP: http://support.microsoft.com/kb/811151

    Let us know if you need assistance with any windows problem. We will be happy to help you.

  • can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop

    can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop

    You define 'Action close lid' to the 'status quo' instead of sleep or Shut down:
    Go to-> double click "Power Options" Control Panel-> 'Select a power plan' under your selected plan, click "Change plan settings"-> "Change plan", click on the blue link 'Change advanced power'-> in 'Advanced settings' tab expand "power buttons and lid"-> extend the action of the 'close' lid, set "on battery" and "Plugged in" to "Do nothing"-> click apply-> OK button

    Multiple monitors: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

    Set up multiple monitors
    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

    Move windows between multiple monitors
    http://Windows.Microsoft.com/en-us/Windows-Vista/move-Windows-between-multiple-monitors

    Understanding multiple monitors
    http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

  • Wireless router WRT160N cable on the desk, I loose internet when the laptop is turned off.

    I have wrt160n v2 router wireless, it does not work for me.

    If my wireless XP laptop is only powered ON the Vista desktop internet wired connection works, I'm not wired or wireless using laptop computer, not on the internet, only power.

    If the laptop is turned off, I have no internet on the desktop, always connected via the router.

    The laptop is used and I didn't know if the without built-in thread was pretty new, so I bought a card to go in wireless.

    When everything is on everything is to play on the internet times two computers, but if you turn off the laptop I have to connect internet directly on the Office to continue in the internet.

    I started working with a tech support yesterday and they are difficult to understand. I had put in the new firmware and the problems persist.

    Can someone help me, I don't really have time to be on the phone for hours figure this all out.

    Thank you

    Jackie

    go to http://audipages.com/router/ and follow the instructions

  • HP ENVY m4-1015dx Notebook PC: hp envy m4 battery not charging but fresh when the laptop is turned off

    Hello!

    I was with my hp envy m4 core i7 for quite a while now... recently, I formatted and installed windows 8.1 64-bit installed. I decided to download some drivers from the hp site and I realized I needed to provide my model of laptop model number I could not remember so I decided to remove the battery while the computer is still connected to the power for the number, then I went back to the battery. the latter, I realized that the cell had not accused beyond of 7%, which was the level of support, until I removed the battery and when I checked the charge level, it indicated that it was plugged in but does not support. When I tried to repeat the entire process as well as close the laptop, remove the battery and turning it again nothing work and completely refusing to charge for its on.when I decided to turn off completely and then it was off it perfectly complete accused 100% operating battery estimated more than six hours of charge time, guys help me to understand what might have developed and what will be the best solution.

    Hi @Phanz,

    Thank you for your inquiry.

    I entered which you have tried to download the driver on the HP website for your laptop but realized you need the model number.  You have removed the battery while the laptop is running.  Now when you reinstall the battery, it shows that it is connected but does not charge and continues to 7%.   You have repeated the process and close Notepad and removed and reinstalled battery, but there was no change. If you turn off it charges the battery to 100%.

    You did all your Windows updates?

    Have you tried the troubleshooter in Windows?

    First of all, I would like to try a Windows restore to before remove you the battery.

    HP computers - using the Microsoft System Restore (Windows 8)

    If restore doesn't work or is not possible, you could try a Refresh Your PC to solve problems (Windows 8).

    Then you can try the following steps.

    HP laptops - test and calibrate the battery (Windows 8)

    The battery method compatible ACPI Microsoft control is basically the driver that communicates between the computer and the battery. There is a chance that it became corrupt and bad reads the battery level.

    Step 1. Go to the Device Manager
    Step 2. Select the stacks
    Step 3. Click with the right button on the "Microsoft compatible battery ACPI Control method" which is in the list
    Step 4. Click on uninstall
    Step 5. At the command prompt, put a checkmark in the box to remove the current driver
    Step 6. Shut down the computer

    Step 7: Remove the battery for a minute and then put new

    When the computer returns to the top it should automatically find the driver.

    Step 8. Go to the Device Manager
    Step 9. Select the stacks
    Step 10. Click with the right button on the "Microsoft compatible battery ACPI Control method" which is in the list
    Step 11. Click "automatically search for an updated driver.

    Do the same thing with embedded controller compatible ACPI Microsoft.

    Last option is to reinstall your Windows 8.1 Pro.

    Good luck!

  • Want to fire green W701 fingerprint reader when the laptop is turned off

    I realize the amount of electricity it uses is trivial, but unfortunately the accusation that carries the battery isn't much else. For the most part it's just because I don't have a use for the fingerprint reader. I completely uninstalled the software from the control panel. I thought that would get the light, but the "light on" survived the uninstaller not so complete.

    I hope that there is a way to do it in the bios. If necessary I could re-download the software of fingerprint and do a from there, if possible.

    It is possible to do anyway, please let me know. It's a minor thing, but I'm pretty annoyed that I'd make a sort.

    When you turn on the computer (off-state), press F1 when you see the Lenovo logo (until the BONES start to load). "I think that you should find the fingerprints under security settings). It shouldn't be too hard to find.

    Edit: Looks like that I don't remember it correctly. In the BIOS, you have the option to completely disable the fingerprint reader, but you do not have the option to turn off the green light only without disabling the fingerprint reader. If you want to disable the fingerprint reader completely turn off the computer, then turn on and press F1 when you see the Thinkpad logo (prior to the OS). When you enter BIOS click protection on the menu, and then select access to the Port of IO. In this list, you should have the ability to disable the fingerprint reader that I am sure that will also disable the go-ahead since the sensor is no longer in use. Press F10 to save and exit from BIOS.

    To remove the green light only, or disable the option to turn on your computer by sliding the finger without completely disabling the fingerprint reader, in my view, you must reinstall the fingerprint reader software. Then, you must open the application after installation and type your password or by the finger scan enter enter parameters. Then click the settings button in the toolbar and you should have several tabs where you can turn off the green light or disable the use of fingerprint predesktop authentication.

    -gan

  • E535 high battery drain when the laptop is turned off

    Hello

    I just bought a Thinkpad e535 and I have a very annoying problem:

    Whenever I have turn off the laptop (not not hibernating, not to sleep) and unplug the power cable from the power outlet the battery loses about 20% of charge every 24 hours.

    What I have done to solve the problems:

    -Always on disabled USB in the BIOS

    -Disabled Wake On Lan in Windows AND BIOS

    -Run the powercfg /devicequery wake_armed command to see if any device is programmed to turn on the laptop

    BIOS version is a later (2.08)

    Software Power Manager is 6.32

    Any help will be greatly appreciated


  • HP ENVY Notebook PC m6: HP Envy does not charge while the laptop is turned on.

    Hello

    Well, I'm having some trouble loading with my HP ENVY. My laptop does not load as I'm with her. It will charge, but it does charge when the laptop is closed and sometimes if it has locked and disabled.  I don't know if it would be the battery or the power supply? Maybe something internally?

    Key points

    * Battery charge does that when the lid is closed (sleep mode). **

    * If I close the lid and plug in the charger, the light indicates orange and the battery will deliver to load almost exhaustive *.

    * If I open the lid before the orange light changing to white, battery icon always says: _ % available (plugged in, does not support). **

    * I tried to waste the battery. I removed the battery and the AC adapter is plugged in. I tried to turn on the laptop or don't put in place *.

    I don't have to replace anything yet. I was hoping to find out if anyone has had this happen to them before.

    Thank you

    Maggie

    Hi there @mdeely,

    Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have a problem with the battery not charging. I'll be happy to help you.

    Please report the number of complete product from your computer. Check out the following, if you need assistance with this information.
    How can I find my model number or product number?

    When I enter the product number, I'll get the documents to your computer.

  • Satellite P10 - 802 - CD when the laptop is turned off?

    Hello

    Apparently, my laptop can read audio CDs while it is turned off using the audio buttons dedicated next to the cd player.

    He says in the presentation of the product and also the manual.
    I don't know how to do. can I just put it on a disk before you turn off the power (if not, I can't eject the disc)?

    Then I press play?

    Hello

    I think you should read carefully read the user manual, because you can find all the information on this subject in Chapter 4-8:

    If your computer is on or off, CD/DVD/audio control buttons are locked by default. To unlock, press the CD mode / digital for more than 3 seconds. Press the CD / Digital again for more than 3 seconds to block them again. When the CD mode / digital is unlocked, press CD mode / Digital and digital briefly to switch between the CD mode. The system LED status indicator will show you how you are.

    For more information see the user manual and if you n t have it you can download it on the Toshiba site.

    Welcome them

  • Satellite U400 - battery only charge if the laptop is turned off

    When I plug in charge he only charged but when I turn of laptop battery is in charge.
    So he allways using the battery.

    What should do?

    Hello!

    What Satellite laptop do you have?

    At the moment, I can t say what the reason is for this. Maybe you should try to update the BIOS that you can find on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    In the worst case, it s a malfunction of the motherboard and it should be replaced :(

    Good bye

  • E7440 latitude: Wake-on-Lan works when the laptop is turned off, but not when it's put into hibernation

    I have a Latitude E7440 running a clean install of Windows 10. If the computer has been stopped, I can use a Wake - On - Lan Magic Packet to the MAC address of the Ethernet port (as described here) to turn the computer back on. But if the computer is in hibernation, it does not work.

    Probably, it is that when the computer is in hibernation the link on my switch light is off, but when it is stopped, the link light is on.

    So my question is: How can I get this phone to maintain the LAN port when hibernation, in the same way on shutdown? Thanks in advance.

    smammy,

    Click on the link below for a possible resolution following on problem of your computer network settings.

    How do I enable Wake on Lan on Windows 10

  • Satellite Pro L650 - 1 L 4: battery will be discharged when the laptop is disconnected

    Hello together,

    I have a problem with my 5 month old laptop Satellite Pro L650 1 L 4.

    When the laptop is unplugged it will pay the battery. About 44% within 24 hours.

    Of course, options like BIOS "Wake we Lan ' and something like which are completely disabled.
    And of course the laptop is turned off completely and not the Sleep Mode.

    Any ideas?

    Kind regards

    Stephan

    Hello

    Please check if the wake-up on LAN is also disabled in the properties of LAN card (Device Manager-> LAN card-> properties-> Advanced tab).
    I also recommend checking the WLan card as well.
    Please also check if attached USB devices don't lose the power of the battery.

    But also a malfunction of the accumulator may be possible... so it has to be checked also...

  • Last updated 5.1 battery drains. And why the first post been deleted?

    Just the next day after update smartwatch3 battery held for a few hours and then went down to 0 in 1 or 2 hours, arrived at work, about 7 hours there was no battery, second day (today) is the same thing.

    Battery wear Android view do not say what it drains so fast. I didn't even use it, its just from the apartment every time.

    What can I try before returning to the warranty?

    It is the life of the battery 2 days before the update.

    Its more than a month since my last battery drain, I think that the last update does work, if its not that then I don't know, tried many things including reset my phone. But no drains battery return on 2 days a month.

  • Tecra A5 - charges the battery only when the computer is turned off

    Hello

    For a few days, my Tecra A5 has started to beep and stop it (like when the battery is low) then that it was connected to the power supply adapter.

    I finally realized that when the computer is plugged in, the battery discharge and does not use the power supply to recharge.

    On the other hand, if I turn off the computer, the battery starts to charge.
    I replaced the battery a few months ago, so I think it's still OK.

    The charger would be defective? Seems strange since it can always recharge the battery when the computer is turned off.

    Thanks in advance for your contributions.

    > The charger is defective?

    Theoretically; Yes, but could also be electronic supply on the motherboard is affected, but on the first stage of the AC adapter should be verified and laptop needs to be tested with AC adapter new, good work.

Maybe you are looking for