battery drains while the macbook pro is in sleep

I have a Macbook Pro 13 inch, retina.  About 6 months.

Problem: Battery drains about 4%-5% per hour or more, while the computer is in sleep.  Which means that if I go to bed with the 30% battery charge, I'll wake up to a dead computer.

It started to happen about 2 weeks ago.  I already brought to an authorized, who ran the diagnostics.  Initially he failed cooling system test, but he re-greased the sink 'fan', and supposedly he passed all the tests.  But battery still absurdly quickly.

I tried to reset the SMC, by someone on the suggestion of this forum, but didn't seem to help.

Any suggestion would be appreciated!

Bring it for repair.  Your MBP has a warranty for which you paid the money.  Use the warranty.

Ciao.

Tags: Notebooks

Similar Questions

  • Short battery life of the Macbook Pro 13 "mid-2009

    My Macbook Pro battery does not seem able to last longer then an hour on a full charge. Initially, I set this up to the age and checked the battery status (ALT + click on the battery in the top bar icon), however it says normal. I have always looked after my Mac - full load battery and let it run down completely before recharging - so I don't know if it's just an age thing or another issue.

    In addition, I had a problem for a long period of overheating, even when I use Safari. Using an application that I can see that it reaches 90 degrees celsius, it is worse. If I have a problem with my fan which is itself an overheating of my Mac and drain the battery?

    I tried to use Apple Hardware Test (now D then it starts) but have had no chance to lift anything but the normal login screen.

    MacBook Pro (13-inch, mid 2009)

    2.26 GHz Intel Core 2 Duo

    8 GB 1067 MHz DDR3

    Seven years on a LiPo battery? If this is the original, you can thank his long and reliable service so far and to prepare for a replacement. Whatever his 'normal' State

  • gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the macbook pro battery retina start

    gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the start of the battery. This happens on macbook pro retina 13 inches

    When I try to startup macbook pro retina in battery mode, it will fail to start showing low battery level and an indicator to recharge the battery. It does not start on battery. When I then connect via the power cable at startup (and check the battery level), monitor of battery in the menu bar indicates that the battery is charged to the top.

    It gets really frustrating and remove my ability to use the macbook pro retina as a truly portable device...

    Appreciate any help on this

    Have you tried resetting the SMC? Reset the management system (SCM) controller on your Mac - Apple Support

  • Suddenly keyboard does not not, always on fans and pressing alt restarts the macbook pro 13 inch mid 2012

    So, I was on my macbook pro when I decided to close it out. Later, when I came back, I opened it and fans began to work hard, that I tried to enter my password, but the keyboard is not responding, so I plugged a keyboard external usb and I have finally started my session, but I noticed an X on my battery indicator and the message "no battery available.

    I have notticed that the ALT key on the MacBook pro keyboard, restarts the computer whenever you press it

    any idea of what disease? Key on the keyboard is not responding, Alt will restart the mac, fans of strong, cold material work, when I plug the charger in light barely there

    I tried disconecting the battery, reset the SMC and PRAM seems impossible due to the alt, restart problem

    Macboock pro 13 inch mid-2012

    SOS

    Have you tried booting in Safe Mode? If you can start check safe mode to see if the problems you described have stopped. If they are stopped, and then restart the computer normally. What happens then?

  • The MacBook Pro hardware test error code: 4SNS/1/40000000:TB3T-128.000 does anyone know what this means?

    The MacBook Pro hardware test error code: 4SNS/1/40000000:TB3T-128.000

    Anyone know what this means?  Next steps?

    styner55 wrote:

    The MacBook Pro hardware test error code: 4SNS/1/40000000:TB3T-128.000

    Anyone know what this means?  Next steps?

    An error in temperature sensor associated with the component of battery on the CPU

    Your only option is to take a test 'Apple Service Diagnostics'

    Genius of booking http://www.apple.com/retail/geniusbar/

    Online https://getsupport.apple.com/GetproductgroupList.action

    check the warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • How can I keep the screen from closing when I close the macbook pro when you use the apple wireless keyboard?

    Try to use with my macbook pro apple wireless keyboard and an external display.  The display turns off when the macbook pro is closed.

    Make sure that it is connected to power.  It cannot run in clamshell mode of the battery power.

    https://support.Apple.com/HT201834

  • Change of keyboard USB external Apple connected to the Macbook Pro

    Dear ladies and gentlemen,

    I need your help. I have a MacBook Pro running the last Sierra 17 "MacOS. I bought a 27 "Thunderbolt display and wanted to use a full external keyboard USB Apple (with the help of the digital keys). I have connected to the screen "USB port, closed down the internal screen MacBook... magic happened... keyboard poped office to the top of the screen external AND external full resolution was working properly..." Unfortunately only for 1-2 minutes, then the layout changed back irreversible in a layout resembling the layout if I would press "alt". Only way I could "resolve" to disconnect the keyboard USB plug and then plug again... but after 1-2 minutes did the same thing...

    I tried to plug the USB plug into the MacBook Pro directly, but the same thing happened...

    I am so unhappy that I can't use correctly the full length external Apple keyboard, large... Any hint/resolution?

    Thank you for your help in advance,

    Péter

    System Preferences > keyboard > Input Sources > [√] see Input menu in the menu bar

    ... then the menu icon before, choose «Show Keyboard Viewer»

    Now, look at the chart of the keyboard that appears on the screen. If the Alt/Option key is stuck, the key will be gray, as if it is held down. If you press it again, he himself is not?

  • El Capital is compatible with the MacBook Pro version 10.10.5? Can anyone help answer this question before I update? Thanks in advance.

    El Capital is compatible with the MacBook Pro version 10.10.5? Can anyone help answer this question before I update? Thanks in advance.

    Why did you start a new post? Post again only after only 8 minutes accomplished nothing.

    There is no general problem going to EL Capitan on your Mac.

    Some applications may require updating.

    Some devices like printer may require the updated drivers. For some readers of devices not being updated are available.

    This is the Office Mac Pro forum. I asked that your post be moved to the El Capitanforum or another appropriate forum.

    Please move to the EL Capitan forum or another appropriate forum. Thank you

  • How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

    How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

    As far as I KNOW, the serial number of the MacBook does not have the serial number of the processor.

  • PowerMac Pro doesn't recognize the MacBook Pro in target disk mode

    I'm trying to restore a disk from MacBook Pro from a backup, but my PowerMac Pro does not seem to recognize the MacBook Pro in target disk mode.  I have a FireWire 800 cable and adapter to the thunderbolt FireWire 800 port.  Is there something more I should do to get the Mac Pro power to recognize the MacBook Pro in disc mode target like an external hard drive?

    There is no "Power Mac Pro;" are you referring to a Power Mac (which would be less than 11 years), or a Mac Pro? You try to migrate data from the MacBook Pro to another Mac, or vice versa?

  • The Macbook Pro 13 "is good for making movies

    Hi all

    I would like to know wheter or not the MacBook Pro 13 "is strong enoughfor film making, I want to use movie making applications and all... I aspire to edit videos short and simple I will upload later on social media. I saw the presentation of the MacBook Pro on the Apple site and I noticed that when talking about the film to do things, they only mention the 15 "... and I had a few doubght.

    To say, I want to buy the MacBook Pro 13 "retina, i7, 16 GB, ssd 550 with a 256 GB of storage.

    Thank you for your help.

    It depends on this kind of filmmaking. Model 15-inch more expensive is the only one with an independent graphics card and will be able to manage better than all other models rendering tasks. If your movie is CGI intensive, you can consider the 15-inch model. If your film is essentially practical, 13 inches could possibly do with simplest post-editing and CGI, but may take longer. If you make a great movie, you can also consider a larger storage capacity as videos tend to take place. View a comparison of the two products on the Apple website here.

  • What is the macbook pro last?

    Hello, I am a student and I bought my first Macbook Pro 3 weeks.

    I love it and was not able to get my hands on it since!

    So today when I came home and was about to check my e-mail, it happened suddenly empty!

    Black! I tried to reboot several times with different combinations, but not of chance that he will not go beyond the login screen.

    I got help from Apple and could activate in Safeboot but always lights in normal mode.

    I'm really upset because I was SO careful with her. He did not leave my room, I have same press as light as possible and put my mousepad touch click so I don't have to support as much...

    As I said though, I used it a lot, a lot of videos, making notes, websites, etc. etc. I don't turn a lot of nights and close the form.

    Y at - it advice or habits that I could make to my macbook it's bad for her?

    And how much time the macbook pro durent usually? I have 13 inch Retina display with mid-range ram and processor, so it was not the cheapest, it was one of the more expensive down 13 inches.

    I'm so afraid now because I'm a student and the death of my macbook on me in the future near or frequently (I only had it for 3 weeks) he's going to make things really difficult. So according to the pleading of your experience, I hope to upgrade to Apple Care or what not. They give you a replacement if it should be fixed?

    I was hoping that it will last at least 5 years, would be a great expectation?

    Thanks in advance for your advice!

    It's just a mistake software, Terminal at all. So we know what you have in running which is the cause and for this we need a report. Download Etrecheck, run the report and post it here, you can do in Mode safe

  • Updated the MacBook Pro to ElCapita to Apple's Service. Now cannot restore last July 7 from Time Machine backup. Help, please.

    Updated the MacBook Pro to ElCapita to Apple's Service. Now cannot restore last July 7 from Time Machine backup. Help, please.

    Visit Time Machine FAQ of Pondini helps with Time Machine. It is a vast site with almost everything that you need for using Time Machine. You will not find a better resource for Time Machine in one place. Due to the disappearance of James Pondini is the site is no longer updated. Therefore, some information may be somewhat outdated.

  • Connection of the Macbook Pro to 2 monitors Dell

    According to me, I've looked everywhere and can't seem to find the right adapter to connect my Macbook Pro (mid-2012) to 2 24 Dell monitors | E2416H at work.

    My Macbook Pro:

    OS X El Capitan

    10.11.5 version (15F34)

    15-inch, mid-2012

    Processor 2.6 GHz Intel Core i7

    NVIDIA GeForce GT 650M 1024Mo graphics

    Connectivity to Dell monitors is DP (DisplayPort) or VGA.

    I really appreciate any assistance that can be provided.

    Thank you.

    Reed

    Get two port to display the mini display port cables and plug the ends displayport on the monitors and the ends of mini displayport ports Thunderbolt on the MacBook Pro.

  • Problems with getting the MacBook pro bluetooth to detect client devices he already never associated with.

    Hello.

    I am unable to get my Macbook pro to detect devices, that it has never been previously connected.

    The Macbook pro is detectable by the Bluetooth devices, but I don't seem to have an option to be able to detect the client devices.

    My macbook pro gives the possibility to be discoverable - mode client for example, I want to discover clients for example, speakers, headphones.

    My bluetooth speakers or headphones work fine on my Ipad so I know the beat headphones works well.

    The pro macbbook is detectable and I can connect by Ipad or phone for her, so I don't know the bluetooth on the Macbook works fine.

    Once coupled display in the area of discovery - and can be connected to.

    I think, basically, it means that the Macbook pro connects as a client - but I don't see an option to put in Server mode.

    How can I do so that it looks non-paired devices - I use 10.11.5 (15F34) attempts to connect to the Beats headphones.

    I have reset PRAM etc.

    I even tried plugging an external bluetooth USB adapter - this did not provide additional options.

    Concerning

    You have removed the devices you are trying to connect to the MacBook Pro? BT devices may only be connected to one thing at a time.

    Barry

Maybe you are looking for

  • How to make a only one log-in to snapfish & eprint

    I created after installation of my HP Photosmart 6520 snapfish as the HP setup completed.  All right.  Then, as suggested by the installation process of HP, I proceeded to learn how to set up ePrint.  I entered my email and a password.  He said that

  • Version of test of streets & trips 2011 - accidents

    -When I go to highlight my computer hangs and goes to a blue screen and must be stopped.  Something with a .dll file is present. What is going on?

  • Internal memory access

    I only post this question because I am currently using a SE Xperia Ray phone and can not access its internal memory on the PC via a USB cable. You can access the SD card using the USB. I think of buying an Xperia M4 Aqua. but since it has 8GBs intern

  • Windows Media Player 'page not found' and .wax files

    Accidentally, I posted this in the Windows 7 forum, please excuse the double post: Your help is greatly appreciated. I have problems when you try to play Windows Media Player/Media Guide/Internet Radio. When I chose 'listen' for a station, I get a bo

  • Cannot join or leave the homegroup

    I tried to create a homegroup, so that I can use my laptop in another room via an ethernet cable. I wrote the first password, but when I went to 'continue', he said that it was false. I could not leave or join the network. Now I can't access my print