Battery fully charged but Equium M50 starts
Hello
I'm looking for some help with a battery problem.
A couple of days, I was using my pc and is going to move in the kitchen, but as soon as I unplugged the AC cable unplug the laptop has been cut.
I checked and it says the battery is 100% / full power.
This happened to someone else or someone know what is causing this / how to fix it?
Thank you.
Hello
First of all, if the laptop is connected to the power adapter then it should run and it lights without the use of the battery!
Second, if the battery is old it might happen that he was running only for a few minutes even it s fully charged.
Happens to me too my battery is about 6 years old and he says that a single minute. Then it s empty.
I know that I have to replace it, but the battery is not very important for me because my old laptop is still on the table and still connected to the power adapter.
If I can live with the bad battery
Tags: Toshiba
Similar Questions
-
Battery fully charged, but by Satellite U500 does not illuminate
Hi all
A year ago I bought a real replacement for my U500 battery. A few months ago the battery seems to go wrong (no charge), and as I was traveling I had no time to take it back to the dealer for yet another replacement. Last week, however, he started to work normally, all of a sudden - or so I thought.
It turns out that the battery actually collected (he recharged from 0 to 95% in any one hour, and now the icon says "95%, no charging current"), but it won't feed the machine. If I pull the plug, the machine will die immediately.
I tried to take the dough out and clean the contacts, but this doesn't seem to help.Any input on this is greatly appreciated. Thanks in advance.
Shady
I think that the battery is defective.
You probably bought some sort of imitation product even if the part number would be the same.Many 3rd party online resellers provide China cheap batteries that are compatible (the dimensions of the battery are the same), but the performance isn't the best
I think you need to replace the battery once more
-
Why the battery fully charged but used for 5 minutes will be disabled it?
Hello
In fact I use iPad Air for 2 and a half years, but already had battery problem.i went to the premium Center in Penang service ask about it. Just give them the answer because the warranty is already so just may 1 to 1 change but must load RM1300 to change. Some can no longer repair. I feel unworthy because even if I bought the Sony Xperia Acro S used more than iPad but still better than the iPad battery. All my friends said that rarely face this kind of problem. How I'm going to support again once because of battery problem can't fix, and change must pay for the new ipad.
Hello
Because the warranty is over, you can buy one off replacement warranty
But you have to pay part of the cost.
You must make an appointment on apple store.
See you soon
Brian
-
my battery is fully charged, but my laptop can not use
I have a problem with my battery, im sure that the battery is ok because I've tried it in other computers portable vaio. the problem with my laptop and it can charge the battery to 100% but it can't use it, I want to say when the power supply is unplugged I can not turn on the laptop with the battery and I was able to do this with several batteries on my laptop and the laptop still does not work. I thnk the problem is something rlated to the BIOS, please help me if possible.
What is the model number of your VAIO and you use the battery that came with the VAIO?
-
Computer laptop battery "in charge" but stuck at 0%
Hello
I have a G6-1b79ca Pavilion and the battery stopped charging.
Windows show "Plugged in, load" and level to remain at 0%. Forever.
Of course it is now completely empty.
If I remove the CC of the computer plug, turn it off immediately.
Here's what I did so far, more or less in that order:
1. replace the battery (recommended by the logon page BIOS...)
2 tried this popular patch:
Stop-> remove battery and power cord-> hold down the button "POWER" 30 sec-> power supply DC-> Boot->-> battery-> uninstall Microsoft ACPI-Complient control method battery -> Shutdown-> put the battery in the Device Manager (cannot start on him alone because it does not... but maybe that might help)-> start the computer
3. updated all the drivers and reinstalled all the HP utility (got the Intel drivers on the Intel site)
4. I updated the BIOS with the latest version and reset to default settings
5 tested the power supply with a multimeter (Psu unloaded, sleeve ground referenced outside it read 19.8V = internal plug, 18V centering PIN)
6 replace the motherboard (which has already been replaced)
7. replace the power supply
8 reinstalled Windows
9 weld the power directly to the motherboard adapter in order to bypass the connections all contacts (cut the CC Plug and soldered the bare wires directly on the pcb)
The utility HP BIOS (F2 on startup) told me that the new battery fails the test and must be replaced. Awesome.
The battery in the utility test assistant (run in Windows) HP tells me that the battery is OK, but would need to be loaded (Seriously? It becomes funny...)
So basically the material is new.
Utility Windows/HP tells me that the battery is OK, but the BIOS utility will tell me to replace it.
What the hell is happening?
The material is supposed to be (entirely replaced) A1 and windows were completely reinstalled.
Any suggestion? My beginning of sanity to fade...
On a side note, here is the situation that I hope not occurred:
1. the original battery has failed
2. he burned the motherboard charging circuit
3. I replaced the battery then damaged mother burned load circuit card
4. I finally replaced the motherboard that was damaged by the new battery, which was damaged by the previous motherboard, which was damaged by the original battery...
5 return to square one, hundreds of $ less and a lot of time to lose...
I can't buy ANOTHER motherboard/battery combo without going crazy...
Thanks for any help!
HE IS ALIVE! Lolll!
The problem is the new battery, I don't know why, but it was completely empty and never had to charge.
I ask the seller to replace and load a new a bit so I was able to start on battery only.
I removed the power supply and the battery, which held the POWER button / 30 sec and started on the battery alone.
Once in Windows I pluged the charger and now it is fully charged!
Looks like the key here is to be able to start on battery alone. one thing I could never reach while struggling with that drained.
This thread of hope help someone solve battery problems, because there are MANY possible solutions.
Thanks to those who have taken their time to help!
-
Battery high capacity for Equium M50
Hello.
Anyone know if I can buy a large capacity (eventually 12 cells) for a Toshiba Equium M50-192 battery? Have tried to find one on the internet but no luck.
Alyson
Hello
I found the info you can use batteries to M50:
PA3399U-1BAS (6-cell) battery pack,
PA3399U-1BRS (6 cells).
PA3400U-1BAS (12cell),
PA3400U-1BRS (12cell).Good bye
-
my hp pavilion zd8000 says battery is charged, but usually start when unplugged why
IM on vista great
Hello
References to Vista also apply to Windows 7.
Check with support from the manufacturer of their books online and the drivers and their forums system
(as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
problems.Support HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/=================================================================
Other information that might help:
Control Panel control - plan change Options - power plans - power - advanced settings
Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
long to load).In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
systems overload are not a problem.Here are some tips to help and troubleshoot battery issues.
Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
them and be careful). Batteries are old, or it could be a problem with the computer.
Check with the support of the machine system, and many of them have on line forums.New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
However on a laptop that not extend their life a lot. Best is to use the a/c adapter
When this is possible.I use the free version of BatteryBar to monitor my battery. Click on the green button on the
Yellow box on the right side of the page to download the latest stable version.BatteryBar - free version available
http://osirisdevelopment.com/BatteryBar/index.htmlAnother good program
Vista battery saver - free
http://www.codeplex.com/vistabatteryProblems with the lives of its use and the battery of power - Mr Fixit
http://support.Microsoft.com/GP/windows_battery_power_settingsYou can also check with the manufacturer of system and forums that many use their own
proprietary software to monitor the battery and they could be known problems with your battery.============================================================
Battery meter: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questionsBattery saver
http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-powerSolutions to common battery problems
http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problemsWhat is the precise the battery meter?
http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter============================================================
Try this - to make a Restore Point
How to create a System Restore Point in Windows 7
http://www.SevenForums.com/tutorials/697-system-restore-point-create.htmlHow to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.htmlThen Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
who will update the driver stacks.Problems with the lives of its use and the battery of power - Mr Fixit
http://support.Microsoft.com/GP/windows_battery_power_settingsI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Satellite A665 - battery not charge/notebook does not start.
I have a problem with my new A665 Satellite.
My battery won't charge and my computer does not start if the battery is in place. whitout the battery (with a/c) the computer works fine.
Please help as I just bought it and without a pile of work a laptop missing its goal.Thank you
Wimv> new Satellite...
New? Don t waste your time trying to fix something on yourself. It is produced and it should work properly.Contact the nearest Toshiba service provider and ask for help. They should pay attention to this topic. For free, of course.
-
Satellite L300 - battery not charging but the power is to reach to the motherboard
Hello
I gave up the laptop and after that not get battery. Laptop works fine with battery only. I opened the laptop to find if it is something dislodged. But everything was fine. I checked the power comes up to the motherboard. But do not charge the battery.
For more information, I opened only Panel keyboard and down to reach the power supply cord. I can see the top section of the motherboard page where I checked that power is reached.
Any body can help?
Thank you.
Abir
> Can any body help?
I think that the material must be scanned for potential problems.
I can only speculate on the defective parts
It could be the power problem or something is broken on the motherboard, but its most of the time impossible to say what's wrong here
So get in touch with a local Toshiba authorized service guy to check this. -
Hello!
I was with my hp envy m4 core i7 for quite a while now... recently, I formatted and installed windows 8.1 64-bit installed. I decided to download some drivers from the hp site and I realized I needed to provide my model of laptop model number I could not remember so I decided to remove the battery while the computer is still connected to the power for the number, then I went back to the battery. the latter, I realized that the cell had not accused beyond of 7%, which was the level of support, until I removed the battery and when I checked the charge level, it indicated that it was plugged in but does not support. When I tried to repeat the entire process as well as close the laptop, remove the battery and turning it again nothing work and completely refusing to charge for its on.when I decided to turn off completely and then it was off it perfectly complete accused 100% operating battery estimated more than six hours of charge time, guys help me to understand what might have developed and what will be the best solution.
Hi @Phanz,
Thank you for your inquiry.
I entered which you have tried to download the driver on the HP website for your laptop but realized you need the model number. You have removed the battery while the laptop is running. Now when you reinstall the battery, it shows that it is connected but does not charge and continues to 7%. You have repeated the process and close Notepad and removed and reinstalled battery, but there was no change. If you turn off it charges the battery to 100%.
You did all your Windows updates?
Have you tried the troubleshooter in Windows?
First of all, I would like to try a Windows restore to before remove you the battery.
HP computers - using the Microsoft System Restore (Windows 8)
If restore doesn't work or is not possible, you could try a Refresh Your PC to solve problems (Windows 8).
Then you can try the following steps.
HP laptops - test and calibrate the battery (Windows 8)
The battery method compatible ACPI Microsoft control is basically the driver that communicates between the computer and the battery. There is a chance that it became corrupt and bad reads the battery level.
Step 1. Go to the Device Manager
Step 2. Select the stacks
Step 3. Click with the right button on the "Microsoft compatible battery ACPI Control method" which is in the list
Step 4. Click on uninstall
Step 5. At the command prompt, put a checkmark in the box to remove the current driver
Step 6. Shut down the computerStep 7: Remove the battery for a minute and then put new
When the computer returns to the top it should automatically find the driver.
Step 8. Go to the Device Manager
Step 9. Select the stacks
Step 10. Click with the right button on the "Microsoft compatible battery ACPI Control method" which is in the list
Step 11. Click "automatically search for an updated driver.Do the same thing with embedded controller compatible ACPI Microsoft.
Last option is to reinstall your Windows 8.1 Pro.
Good luck!
-
Battery "connected, charge", but DOES not charge.
Hello
I've recently updated in Windows Vista Home Premium to Windows 7 Home Premium. With Vista, my battery played very beautifully and I've never had problems. As soon as I have upgraded to Windows 7, I currently has the following problem:
When I hover over the battery icon in the system tray, it says ' 19% available (plugged in, load). However, the battery is not at all. The small farm level animation stops and, although the system seems to thinking that is my battery charge, it is not. When I first installed the new OS, battery charges to 69% with the same problem, so he went up to 75 percent for about 1 week before in free fall, so that now my battery charge limit is 19%, which, as you can imagine, takes about 15 minutes to the battery power.
After several redundant and unnecessary communications with Microsoft, I thought that maybe someone on this forum might have experience with this problem or any suggestions on what I could try.
Note that it is NOT apparently common problem some people have with the battery saying "plugged in, not charging", that my system is specifically stated the battery recharges when it is not.
It took me some time to get even Microsoft agree the problem they insisted that it was because my battery is a bit old. However, this happens with the two batteries that I own, using a charger that I have, and, as I said before, it started just when I installed clean Windows 7.
Thanks in advance for any help!
Ryan
Hello Ryanr1083,
We had this problem. I suggest to contact the manufacturer of the system, and you may need to replace the bettery.
You can see the links below, which has similar problems.
I hope this information helps. Please get back to us if you have any other questions on this subject.
Thank you
Mir - Microsoft Support
Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads -
My power supply battery icon States attached but do not load, why
Hello
Download and run the test utility of battery pack available on the next page and see if it reports any problems with your battery.
http://h20239.www2.HP.com/TechCenter/battery/battery_ts.htm
Kind regards
DP - K
-
Satellite P55W - C5204 Toshiba full RADIUS battery not charging
Hello world
Here's the problem...
I have a toshiba P55w-C5204
I leave the battery to one afternoon and the closed laptop
When I tried to plug it in overnight was´t led current dc on (must be on to light red when you connect it and once charged white light, it should be), but the Red battery light indicated that I was using battery as it was the.Start the computer laptop no matter how long that I led the cable connected says battery fully charged, but if I unplug the cable dc current laptops matrices.
I tried different procedures posted as stop disconnect the battery, start... .unistall ACPI driver from Device Manager, close, connect battery; and it doesn´t work.
I also create a partition in the hard drive and install a new 10 windows and the problem is not changed.
Help me please, I don't want to lose my Toshiba it works great despite this problem and I have can´t but another.
Would it be the battery or the center cost (motherboard?)?I would like to know that it was a pilot or a bios Setup even a virus haha.
Thanks to you all.
Carlos P.Hello Carlos! I'm having the same problem. It started today. What is find a solution?
-
Hi people I need help if you can help.
I have an Equium A60 laptop and when I press the button when the laptop is running out of its battery, it does not start, but when I plug in the charger and press it starts very well.
Thought the battery was dead, but when he starts it says the battery is fully charged and it works fine without the charger plugged in for the duration, what it says on the battery monitoring software.
basically the on off button works fine when the charger is plugged in but has no effect when running off the battery voltage.Would really appreciate some help on this one, if you can imagine all the solutions
Thank you
Hello
In my opinion there is no one-size-fits-all solution for such problems. You can try to remove the battery to put a little time inside and test again.
-
HP pavilion x 360: works with a fully charged battery
Hi, when I work connected to AC with the battery fully charged, it damages the battery? or the load is stopped and I get HQ directly to the PC?
Thank you!
Hi @avisaf,
Thank you for your inquiry.
There is no harm in the use of current alternative when the battery is fully charged. Once the charge is completed it stop the load until the battery again reached a specific parameter, date on which it will begin to load it again.
He stops the load cells when they are full and gives more power when they are too weak. Prevents them from short circuit or having too much power from their part. The best thing about Li - ion cells is that you can just reload them here and there, giving them a bit of power every so often, a full charge. They are how to always have a life expectancy of so many cycles and so eventually lose their charge max (read once you run the battery for).
One thing essential to consider (depending on where you live) East of power cuts, if the computer you suddenly lose power, it is not healthy. Ditto for your laptop, if you have removed the battery. The battery works as a UPS (uninterrupted power supply) so you can always use your laptop and turn it off safely.
All rechargeable batteries have a limited number of charge cycles and should be replaced.
Here is a link to HP - laptops test and calibrate the battery (Windows 8) if you need.
To say thank you for the reply, please click on the thumbs upwards the button below.
If you think that I addressed your concern, please choose the solution provided to help other people to find this information
Concerning
Maybe you are looking for
-
1. I have used the program extensively in recent weeks, many small travel films. 2. when in the projects, if you click on create a new movie and sign, the new movie and trailer options opens successfully. 3. click on film, nothing goes very well but
-
I use zone alarm and on the zone alarm toolbar tool the "site check" option is grayed out.
using firefox 10.0.2win xpZoneAlarm:Version of ZoneAlarm Security Suite: 10.1.079.000
-
Assistance required in the palette of Boolean
I will acquire a signal pulse through DAQ cards in labview. Now what exactly I want to, it's that whenever the pulse is High (+ 5v) should give me True (Boolean) and when the pulse is low (0v) should give me False (Boolean). How this could be done in
-
Removes the stationary state backed up information during install it updates
We are a small school and only use stationary State for a few months. I found that some of the information that has been recorded on computers are being deleted when steady state allows updates each week. For example:Good research has been defined a
-
WRT610N &; ext HD via USB (for the use of NAS)-can not move files to the external
Linksys WRT610N v1-Firmware Version: 1.00.03 B15 (updated about a month ago) Western Digital My Book Mirror Edition 2 TB model # WDH2U20000- http://www.wdc.com/en/products/products.asp?driveid=466-NTFS,-mapped with my M: drive, and-named WD 2 TB-MIRR