Battery is dead and the Satellite C660-15r not turn on or charge

Similar Questions

• Satellite C660-15R - not to recognize the operating system

  My sons laptop has stopped working.
  Toshiba logo appears with choices after pressing F2 Setup or F12 boot device selection menu
  what I seem to try to end up with message telling me that "operating system not found '.

  I don't know whether or not this model came with a recovery disk, and my son is of little help
  can someone please advise.

  Thank you

  Hello

  Please try to test if you have access to the HARD drive as a result of this instruction recovery image - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  Please send comments.

• Satellite A500 - switch WLAN and the FN keys does not turn the wireless

  I have currently problems try to activate the connection Wireless on my laptop. My laptop model is a satellite A500 PSAR9A O2J001. My laptop's physical wireless switch does not work and neither my Fn keys don't work (none of my function keys work not at all). It was awhile I saw an orange light next to my mobile switch indicating it was on, but one day, it's just off. Since then, I was not able to reactivate it after a lot of searching on Google, and this place is my last resort after doing so many things.

  Any help or comments would be appreciated, I am very desperate to solve this problem for studies.

  Your description is OK but rather general isn't easy to say with certainty what the problem is here.
  Is the card properly installed wireless (Device Manager)?
  FN keys work in general? You can use other keys FN + Fx? You see flash cards when you press the FN key? If so what options you see when you use FN + F8 (WLAN I think)?

  When you move position WLAN communication works and use the FN + F8 to what exactly happens?

• Get (5) different SAS errors for more than a year. Finally noticed after a disk RAID 1 is dead and the replacement drive will not ready. What is my controller?

  Just noticed newspapers Windows for my 6/iR PERC have been reporting these errors almost every day for a year, is my bad controller?  If Yes this is very unfortunate because it is integrated.

  1.) sense unexpected. SCSI sense data: Sense key: sense 3:11 qualifier detection code: 1: physical disk 0:0:0 controller 0, slot 0

  2.) SAS port report: SAS wide port 0 link lost on PHY 0. : controller 0 (SAS 6/iR integrated)

  3.) predictive Failure reported: physical disk 0:0:0 Controller 0, slot 0

  4.) (ERROR MORE RECURRING): a disk media error has been corrected. : virtual disk 0 (virtual disk 0) controller 0 (SAS 6/iR integrated)

  5.) \Device\RaidPort0, restore the device, has been published.

  Hello.

  In addition to the Windows logs, what is the status of the disk (VD) virtual and physical disk 0:0:0 in the BIOS of the controller or the OpenManage Server administrator? If the status of predictive failure is constantly reported, then you can consider replacing the physical disk 0:0:0. If the replaced disk is offline, try to force if online via the controller BIOS. Make sure that your BIOS and controller firmware is up-to-date.

• Satellite C665 does not turn on or charge

  Hello

  Like a fool I plugged a universal power adapter in my laptop set to 23v not 19v, now it does not work or load with its own adapter.

  The battery was already endangered and did not cool that I don't know if it is independent or not, but I would like to know if I did serious damage.
  Any help would be appreciated.

  Tommy

  Remove the battery and unplug the power plug. Press the power button / stop for 20 seconds. Connect the original AC adapter and try to start your laptop.

  Is continuous ON when you connect power adapter?
  What happens when you press the button walk / stop?

• Satellite C660-15r stucks and without recovery possible

  Hello

  I hope someone can help me or who knows what to do. I have the Satellite C660-15r it been shut down correctly, but when put back come with start windows normally, as if it was interrupted, I clicked ok for that but instead of loading, let's make some kind of recovery only he was not able to complete this and rather said there is nothing to recover.

  It is stuck at it and will go no further, says administration system to log in however its not allowing to connect or to do anything about this or off farm then restart, I tried factory reset, but it will not work at all I've tried several attempts with 0 and other options, told me it does not work , but I can get up f2 and f8 loading up all that works well but I find no option to factory reset. It gives me options to recover, but they take the same screen with no improvement and safe mode does not work.

  I hope someone can help me I will be very grateful.

  Thank you in advance.

  Shell :)

  At first, I must say that recovery option is available if the laptop to factory settings. After reading your ad I n don't know if you still use OS install of origin that you got with your laptop or maybe the OS preinstalled on your own.

  I assume that you did not create a media recovery (DVD) use pre-installed Toshiba recovery media creator, right?
  In the use of your disk recovery situation could be simpler to solve this problem and install original recovery image.

  Can you please post model mobile exact?

• Satellite C660 does not start on disc or USB

  My Toshiba Satellite C660-DSC0QE app, BIOS version 1.80, will not start Windows more - it just goes to the dreaded black screen with white cursor.

  I tried a system Win 7 recovery disk, a USB with software from Kaspersky on her recovery and even a full Win 7 installation disc, and it does not start at one of them.

  The boot order is set correctly, (optical drive or USB port) devices are read, but their initialization never actually in them - there is an obscure error message, or it acts like they weren't there at all.

  The obvious answer to these forums seems to be disable secure boot mode and then switch the to the CSM UEFI boot mode. Easier said than done - the menu options don't exist at all in my BIOS/CMOS screens.

  Finally, I see no way in the instructions to get a BIOS update occur without being already in Windows on the PC - http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm I'm assuming that the BIOS version 2.00 would have these options.

  Any help gratefully accepted!

  Hello

  I assumed that you have a white blinking cursor in the upper left corner.
  Is this correct?

  These symptoms appear where the system can not find a boot device (HARD drive) or memory problems (RAM module).

  First of all, you said that you have UEFI / CSM boot mode in the BIOS settings.
  So I m asking you what parameters of start mode appear in BIOS exactly?
  Find you these settings in the right area?
  Usually, you should have an area (tab) called security in the BIOS.
  In most cases, you will find a safe boot option, but the Satellite C660 does not support this option because it s too old.
  But the startup mode (UEFI /CSM) should be available in the BIOS. Check the settings in the BIOS of the system area

  Anyway, as I said above; It could also be a memory problem, so I recommend you to check if the memory is OK.

• Satellite C660-15R: how to lock the size of text to stop it to increase.

  Satellite C660-15R

  How to lock text size to prevent increase/decrease at will.
  I can use him reduce / increase the installation when it happens, but it cannot remain stable.

  Beginner as a whole!

  Hello

  What text and what application do you mean exactly?
  For example, the content of the Web browser (internet explore) can be changed by pressing the CTRL key and moving the wheel of the mouse up and down.
  You can also go to display and set the Zoom to 100%

  To be honest, this can be locked

• Where can I find parts for Satellite C660-15R?

  Hi, I wonder if someone can help me.
  I got a Toshiba Satellite C660-15r, which took the screen broke and ripped off the base, so the hinges are broken; Anyone know where I might be able to find replacements?

  I tried to check eBay but can t find the ones for this laptop.
  Also, I noticed that some threads are running around the edge of the screen case I m guessing it is the son for Bluetooth and the wireless card while they were also torn.
  Is there anywhere I can get a replacement for this also?

  Thanks a lot for any help

  Best place where you can order is a Toshiba authorized service provider in your country.
  To find the individual hardware components for this new laptop model is quite problematic.

  Try to contact Toshiba service and ask for help.

• Where can I get drivers for my Satellite C660-15R?

  Hello

  Can someone tell me where I can get the drivers for my Satellite C660-15R?

  I've been on the download page and do not know what is this computer series and how to get the correct drivers.

  Thank you, Andy.

  Hello

  Check it please http://www.toshiba.eu/innovation/download_drivers_bios.jsp?service=EU once more.
  You can find your laptop as follows:
  Type of product > Notebook
  Family > Satellite
  Product series > C series Satellite
  Model > Satellite C660
  Model short-term > PSC0LE

  Can find you it?

• Satellite C660-15r - restore Windows 7 without password

  I bought Toshiba Satellite C660-15r off someone, but the problem is that there is a password at startup upward.
  It's very well because I was about to restore it somehow but when I go to the restoration of windows you need a password to access.

  Is it possible to reinstall windows with using windows restore. I really hope that someone can help you.

  My advice is to follow:
  When you buy used laptop install OS again to have the own operating system preinstalled. Use the Toshiba recovery image, if possible.
  Just a question: do you mean password BIOS or Windows login password?

  If the previous user has put a password, you need and without that password, you can do nothing.
  If the pre-installed OS is locked with password login, you can install OS using recovery DVDs and you don't need any password for it. I just hope that the previous owner has created this recovery DVDs.

• Keyboarrd on my Satellite C660-15r really unresponsive

  Hello

  hopiing can anyone helop, it drives me crazy.
  I'm a pretty good typist but it's all the hll goone since I got my Satellite C660-15r.
  As you can se, the keyboard eiter ignores letters I typd or highlights twice.

  Please tell me the easy way theere n!

  Have you tried to update the BIOS?

• Upgrade of RAM up to 8 GB on the Satellite C660-180

  Hey guys,.

  Thanks a lot for taking a peek at my post.
  I have the Satellite C660-108. I think the upgrade to 3 GB up to 8 GB ram.
  I'll be very grateful if someone could answer my questions before making a purchase.

  It is a model of Ram. I think of buying.

  Kingston HyperX Plug and Play DDR3 1600 MHz CL9 8GB SODIMM Memory Module

  I wonder if it would correspond to my laptop?

  Also, I found this on C660-108

  Type: Intel® Graphics Media Accelerator HD
  amount of memory: 1 273 MB shared memory with 3 GB of installed system memory and up to 1 696 MB with 4 GB of system memory, (with system of 64-bit pre-installed operating)
  memory type: shared.

  If I update up to 8 GB ram it would mean my graphics system memory will be up 3 392 MB as well?

  Thank you very much.

  Kit

  According to the technical page of Toshiba laptop, 8 GB of RAM (2 x 4 GB) are certainly possible.
  Kingston is a good manufacturer of RAM and provide good quality modules.

  The RAM modules should support the following sepcs:
  DDR3 1066 MHz (PC3-8500)

  Processor PENTIUM P6100 (2.00 GHZ) supports a 1,066 MHZ FSB and therefore the PC3-8500 must operate at full speed 1066 MHz

  > f I upgrade ram to 8 GB it would mean my graphics system memory will be up 3 392 MB as well?
  More RAM means more can be shared with the GPU, but this is controlled by the graphics driver automatically.

• Modeling 3D (Sketch Up) programs keep crashing on the Satellite C660 - 28 d

  Hi guys,.

  Obtained the Satellite C660 - 28 d to Christmas as my old laptop was dying on its feet. So far I've had no problems with it, except for when you use a selection of programs, namely Sketch Up and the rhinoceros are two 3D modeling programs. Strangely enough, AutoCAD Revit works great, I have imagined would have been more demanding on the system.

  When Rhino opening he allows me to choose my model before crashing and displaying a message saying "Rhino 4.0 has encountered a problem and needs to close" and with Sketch Up I get again select a model but then a message saying "Google SketchUp has produced a bug splat and needs to close" followed by a similar error report form that never works when I try and send the error. This is happening on SketchUp 8, after having uninstalled and reinstalled SketchUp 8 and then uninstall and install SketchUp 7, all with the same result.

  It has been suggested to me that there is an error with the graphics card and I have to download a driver, but the only driver on the Toshiba site that would make sense to me is the display driver, I have installed and makes no difference.

  Please help me, I need the use of these types of programs for the University.

  Hello

  It is possible to have these problems because of display driver.
  You should maybe contact the software manufacturer and ask for help. Toshiba doesn't third party software support. Software maker has better experience with own product. I presume that what they have tested on different platforms and need to know what can be the problem.

• For the Satellite C660-A219 function keys do not appear

  For the Satellite C660-A219 function keys do not appear... I formatted my laptop and installed a new Win 7 after that I lost... function keys. Please help

  Have you installed version of Win7 or recovery image original Toshiba that you got with your Toshi?
  Did you install additional package from Toshiba?