Battery problems (Z500) with windows 10

Hi, I have recently upgraded to windows 10 and my battery (on the Lenovo not touch Z500) does not work. Windows just says: "plugged in, but do not load. This means that if I unplugged it, she would have turned off. I tried to download a driver, but he just said that it is not compatible with my system. I went down to windows 8.1 and it works well again. Anything anyone can do to help me with problem?

OK, thanks for your time though. Lenovo Energy Management must be on "Maximize battery life" for it load to 100%. I have it.

Tags: Lenovo Notebooks

Similar Questions

  • Fix for common problems associated with Windows Update repeatedly trying to solve the same problem

    When the machine running Windows Update on a Windows XP Professional (SP3 with IE8), the information for the download of the ActiveX bar does not appear. Tried to run the Fix for "Common problems with Windows Update" and it says "Windows Update components must be repaired. Difficulty-it short, reports of success, "Found Themes" saying "one or more components of Windows Update are configured incorrectly". However, still unable to download updates from the information bar does not appear. Repeating the difficulty happens with exactly the same problem i.e. reports etc. but no success still can not download the ActiveX on Windows Update since the information bar never shows up.

    At tried all the suggested solutions I can find for the reported similar problems such as checking the downloads ActiveX security settings, reset Internet Explorer settings, and even resetting Windows Update (Articlce ID 971058) components. Still no luck. Therefore, I am unable to manually check and download updates of Windows security.

    Otherwise my PC works well. Norton Internet Security is installed but did not prevent Windows Update to work on another PC I have. The information bar appears sometimes for other downloads, and it doesn't seem to be a problem on the Windows Update page.

    Please can you help. Thank you.

    No, I'm not not first uninstall IE8 (or IE7) before proceeding with the repair facility...

    Long history, technical, short version: do not uninstall IE8 (and/or IE7) before doing a repair installation (Windows XP only!) leaves the two Internet Explorer and Windows in a State of "confused" or "broken". Your only recourse now is a clean install of Windows (after backup your personal data).

    No, another repair facility won't solve the problem - even if you uninstall IE8 beforehand.

    Follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

    If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

    Note: The computer must NOT be connected to the internet or local networks (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

    Wish I had better news for you.  Good luck!

    PS: So that registry cleaners can solve some problems (temporarily, at least), they are not & cannot fix what caused the problem. Compare to treat a broken leg with a stick and a couple of BandAids.

  • Spooler problem printing with Windows XP error: "error 2: the system cannot find the file specified."

    Original title: problem with Windows XP error print spooler

    My printer stopped working (after several years of use); the computer is not even grateful as being installed. Cannot reload the printing software. Tried to download the software of HP, but all that says there is a problem with the print spooler file: error 2: the system cannot find the specified file... (when I try to start it directly)

    Hello

    1. What is the brand and the model number of this computer?

    This problem may occur if a third-party printer driver or an installed third-party service prevents you from adding printers, or if the third-party printer driver or the third party service affects the functionality of a newly installed printer.

    To resolve this issue automatically, click the fix for this issue link in the article below. Then click Run now on printing problems and printing errors troubleshooting, then follow the steps in this wizard. If the problem persists, perform the rest of the procedure described in the article.

    You cannot add a printer and you receive Printer Spooler error messages in Windows XP
    http://support.Microsoft.com/kb/324757

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • (Windows XP) Huge problem associated with Windows XP Signature

    Hi all

    Im having a problem @ home in my PC.

    I activated my Windows XP Activation already. & then I did for most all the total of updates is like 100 +.

    & then I try to install the driver for my ATI graphics card, while installation that I encounter this problem.

    He said,

    Window XP Signature has not be installed or something... then he said, Countiune Installation can damage your computer for blah blah blah

    IM currently are not @ home, I'll reach the homepage in 5-6 hours away.

    I'll post a screenshot of what happens. But if someone get what I say, then please respond ():

    NVM solved (: I remember ATI you have a problem associated with mircosoft then Yes (: thought thanks))

  • Printing problems wireless with Windows 7 Home Premium

    Previously, I had Window Vista downloaded on my laptop and had NO problem printing wireless. Now I have Windows 7 Home Premium. I have a modem from my phone company, a wireless router and a Photosmart All printer (C4795).  The same one I had with Vista.  I just can't get anything to print UNLESS I connect a USB cable from my laptop to my printer (very frustrating). I'm not completely PC illiterate, but not very clever of them either. I uninstalled and reinstall the printer, the router and the modem and that did not help. I had the company of phone on the phone for an hour last night and they could not help and saw nothing wrong with my set up. I need an answer "simply stated and clear" what I have to do. I have a group RESIDENTIAL network set up on my computer, but have not set upt the other computers at home (a laptop) with the network home for the moment. I wanted to get a computer is working correctly before moving forward. The internet connection to the HOMEGROUP network seems to be well. All devices are listed and look good, but I can not just wireless printer that's why I brought the first wireless printer.

    Help?

    Headed home, this is my desktop PC. Hoping answers tomorrow or to my email. * E-mail address is removed from the privacy *

    Hello

    1. what happens when you try to print?

    The printer is compatible with windows 7 as per this link: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=HP%20Photosmart%20C4795%20All-in-One%20Printer&v=HP&uid=Q8382A&l=en-US&pf=0&pi=0&s=Photosmart%20All%20in%20ONE%20Printer%20C4795&os=32-bit

    I suggest you follow the steps in this article.

    Find and install the printer in Windows 7 drivers: http://windows.microsoft.com/is-IS/windows7/Find-and-install-printer-drivers

    Install a printer: http://windows.microsoft.com/en-us/windows7/Install-a-printer

    Refer.

    Update a hardware driver that is not working properly: http://windows.microsoft.com/is-IS/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

    Printer in Windows problems
    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    For more information:

    The product does not work properly after reinstalling on a network and upgrading Windows Vista to Windows 7

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01918192&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=3940574

    Wireless printing Center

    http://www.HP.com/global/us/en/wireless/troubleshooting.html

    I hope this helps.

  • problems wifi with windows 8

    Newly acquired computers HP laptop experience problem with WIFI at home.

    It uses Windows 8. On the same network with Windows 7, older computers don't show any problem. We have updated the firmware on the router, we, can we say, having updated drivers. Problems is that the link to internet falls and to restore the link, you need to restart.  At however noticed some references for the same problem in YouTube without any solution to offer.
    Thanks for any advice you get givve (that was transmitted by the Windows 7 box) AAlois

    Hello Smirda,

    Welcome to the Microsoft community where you can find all the answers related to windows.

    According to the description, it seems that you are having problems with a Wi - fi links fall.

    1. What is the brand and model of the router?

    2. which browser is installed on the computer?

    Run Troubleshooting network adapter and see if it helps.

    a: press the logo Windows + O to open the search box.

    b: Type Troubleshooting, press ENTER.

    c : now, click on network and Internet.

    d: then click on network adapter.

    Answer to us if you are having problems with links Wi - Fi or any other issue of Windows, and I'd be happy to help you.

    Good day!

    Hope this information helps.

  • How can I fix problems created with Windows Installer Cleanup?

    I had some problems installing a software on my Windows XP and had to run the software Windows Installer Cleanup before the program installs. I was stupid and didn't choose carefully what programs should perform the Windows Installer Cleanup. So now my automatic updates for my XP will not be installed.

    Here is the message I get when trying to install the automatic updates:

    Initializing installation... done!
    Install the update of security Microsoft .NET Framework 2.0 Service Pack 2 for Windows 2000, Windows Server 2003 and Windows XP (KB974417) (update 1 of 1)...

    Here is the result:

    Some updates not can be installed.
    The following updates have not can be installed:
    A security update Microsoft .NET Framework 2.0 Service Pack 2 for Windows 2000, Windows Server 2003 and Windows XP (KB974417)

    This is the only notification I receive the updates failed. I think it's because the link to the installer of windows has been removed by the software Windows Installer Cleanup.

    How can I correct this situation?

    Kind regards

    Red Cloud

    Red Cloud,
    If you look at the history of the update, which is the error code for the update failed?  Go through the steps of KB923100 and post back with the results.

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Problem-solving with Windows 8.1

    I just changed my HDD for one SSD and re-downloaded Windows 8.1 and I have problems with my resolution.

    It does give me only 2 options for resolution, 3200 x 1800 and 1024 x 768 (which it says is recommended). When I turn it to 3200 x 1800, everything is tiny.

    Where's my resolution (3840 x 2160)? Why is not just "an option? Any ideas on how to solve this problem?

    Install the chipset drivers first.  Then, restart and install the Intel video driver.  Finally, restart and install the nVidia Driver.

    All the drivers for this model:

    www.Dell.com/.../Advanced

  • All-in-one HP ENVY 5530: problems scanning with Windows 10

    10 Windows does not recognize the scanner of my all-in-one.  I have no problem with it recognizing the printer and printing.  I removed the device and reinstalled several times.  As soon as I did this I can use the scanner in the device only, but not from the pc.  When I turned off the pc, it disables the scanner and I have to start all over again with delete and reinstall.  What should I do to solve the problem?  Thank you.

    Hi @Anina,

    Welcome to the Forums of HP Support! I see that you have problems with scanning. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

    You may need to temporarily disable any Antivirus software, just to be sure, that it is not interfere with scanning.

    I have provided a paper for not being able to scan using Windows 10. If you're still having problems, try one of the applications in step 6 of the document, unless can not analyze after the upgrade, HP printers - printer after Windows upgrade problems 10

    Please let me know the result and if there is anything else I can help you. Thank you.

  • HP Officejet Pro 8610: Problem offline with Windows 8.1 printer - HP8610

    We had a power failure last week and since I can't get my printer to work. He always tells me that I am offline. I followed some of the advice in this topic but nothing works. I'm ready to throw the sponge and the printer out the window! It all along had a problem disconnect if I don't use it for an hour or two, but more often by just turn it off and turn it back on, it worked. Not this time. Please can someone help? It can't be that hard, can it?

    Hello

    Please download and run the HP print and Scan Doctor www.hp.com/go/tools

  • My problem is with window library

    On the photo print page, I can't select a layout to print. A full printed page is visible only. How can I fix it?

    Hi Cclint,

    Follow this step to select page layout for printing.

    1. open the Photo Gallery.

    2. Select a picture, click print

    3. click on Options at the bottom of the right hand of the screen

    4. click on printer properties to select available.

    Previous post: the result.

    Bindu S - Microsoft Support

    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • having problems installing with Windows 7 & itunes.

    How can I overcome the problem?  Error message says 32 version of Microsoft VC80 CRT victory & public key token, architecture proceesor x 86?

    any help welcome

    I can list if necessary complete error message

    A 2nd message reference to Apple Mobile Device?

    Install and then back to back & in between these 2 messages

    Ready to contact by e-mail if you have a complex solution.

    Finally, has given up trying different solutions & restored the operating system "out of the box" settings back to the original

    I - tunes installed perfectly!

    that was all I wanted to do in the first place

    Thank you all for the advice

  • Re: Cannot install Nvidia Grphics driver in Z500 with WIndows 7 64 bit

    Thank you
    I tried this solution and get success.

    use the final nvidia driver and download it to the nvidia site.

    I used version 320.49.

    CHANGE NOTE: Message was moved to the top of the thread to help an escalation. For all the next post please continue to use this thread.


  • Problems of simple pass with Windows 8.1

    I just bought a HP ENVY TouchSmart m7-j010dx Notebook PC running Windows 8.0 about 5 days ago. I was able to configure Simple Pass, scan and add numbers and associated passwords. Then I upgraded to Windows 8.1. Now, I am unable to open SimplePass, add extra finger scans, or change the settings since the last update to Windows 8.1.

    I tried to re - install the program as a function of repair. It works by welcoming and accepting a fingerprint at the opening. When I click on the program in my Start menu as it begins to open, load databases, then disappears.

    I then uninstalled Pass Simple and re-installed after you download it again from HP at this link:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-122818-1 & CC = US & DLC = in & LC = in...

    During the installation, there was a message needed me true API (x 64), which found the program installation and re-installed and then installed http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63224.exe

    After you have reinstalled successfully Simple version 6.0.100.276, I rebooted my computer. However, the program is still not fully functional. I still can't open SimplePass, add extra finger scans, or change the settings. I am able to connect to Windows with a fingerprint, but he didn't ask me for analyses when I connect to different web sites.

    I'd appreciate the help. Thank you.

    See you soon,.

    Ectophile

    This message is for everyone who has problems SimplePass with Windows 8.1.

    Christopher of Jeff, executive relationship at the Head Office of Hewlett - Packard Company contacted me personally after I had tried for 5 five months get HP to fix this. I submitted to a team climbs HP Case Manager, who offered me the following options:

    # 01 Fix my computer free of charge. This shipment of the machine to them and the possability that I could lose data if they need to restore the operating system. I would be also without the computer.

    # 02 Give me a free 3 year warranty extension on my current computer which includes a home service on some components, but not the motherboard and cover against accidental damage.

    # 03 Give me an equivalent model new HP laptop computer with extended warranty of 3 years including in-home services and coverage against accidental damage. For this, restoring them my old computer AFTER transfer of programs and data to the new machine files. It was suggested that I go to the HP online store and browse the available templates. They also indicated that they would be willing to make minor improvements if my exact specifications are no longer available.

    I am sure that these same choices could and should be available to ANYONE who also had these same problems very frustrating and annoying. After all, we all paid an additional amount for software and SimplePass fingerprint scanning equipment and are entitled to expect that it works with all versions of Windows 8.

    If, as I have, you have also made several attempts to get this problem resolved by HP, Best Buy, Microsoft, or any other third party, without success, try to contact Jeff Christopher directly at [email protected].

    I hope that this could finally solve this problem, and everyone gets the same fair and equal treatment that was offered to me.

    I must also congratulate HP to finally take a step upward, appropriating and goes the extra mile to resolve this problem. Accordingly, my view of HP and my loyalty to them, increased considerably.

    See you soon,.

    Joel

  • Problem send and receive e-mail with Windows Mail

    For two days, my Windows Mail service ceased to send or receive e-mail addresses. My internet service provider is Comcast. A Comcast tech checked the problem and determined that the problem is with Windows Mail and not Comcast. Any ideas on how to get the system in place and work?  When I click send/receive in Mail the screen shows 'Permission', request my username and password (that I have provide) eventually receive the following error messageAccount: "mail.comcast.net", server: 'mail.comcast.net', Protocol: POP3, server response: '-ERR name username/password invalid ', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92

    Here is the answer.  Log in to Windows mail.  Click on tools.  Access accounts.  Click on your username.  Go to properties.   Click on the box under servers, click the box my server requires a secure outgoing connection. This must be a POP3 connection.  Under incoming mail must say: mail.comcast.net.  Under outgoing mail it should say: smtp.comcast.net go to the Advanced tab, your outgoing mail must be 587 & your incoming mail must be 110.  None of the boxes requiring sure connectrion must be verified on the Advanced tab.  On the general tab, you must enter your mind to email Comcast.  On the Server tab, incoming mail, you must enter your username & password.  Also, not everyone at Comcast knows what is happening.  I had to tell me that my email problem was caused by a virus, when in fact, it is because their system was down.  They had me go to Microsoft.com download a virus removal toll which has led in turn to make me lose my all the Windows operating system.

Maybe you are looking for

  • Siri beep - AWOL

    Running IOS 10.0.1, also participated in the public beta version of IOS10.  For some time now, the beep that siri is usually done by long pressing the home button has gone.  Curiously, when it is connected to bluetooth in the car, it still works, (th

  • Photos for iOS change the orientation of the cultures

    How can I change the orientation of the culture of the landscape to portrait on a landscape photography. That Exchange crop 6 x 4 to 4 x 6 to create a photo portrait. I can do this in the application Photoshop Express, but not in the Photos app. I us

  • How long durent they more battery replacement for iPhone 5?

    I own my iPhone 5 for 3 years, and it must be the battery.  Can I wait a few years of use on this phone if I replace the battery?  Or I'd be smarter to upgrade?

  • Satellite L40 - 16 d - I need a motherboard

    I need a motherboard for my Toshiba Satellite L40 - 16 d. Can anyone help pl?

  • FTP file transfer

    Hi all I'm trying to transfer a file from my RIO 9074 on my local machine. I have attached the vi that I use. The problem is that even though I can read all the files inside the RIO, the FTP GET multiple just Files.vi transfers the file to the top of