Battlefield 1942 problems with windows 7 64 bit

Similar Questions

• PROBLEM WITH WINDOWS 7 64 BIT & PRINTERS

  Hello

  My company is replacing all of our window xp machines and we head to widows 7 64-bit. We currently have a print under windows 2003 server.
  I downloaded the universal readers of hp windows 7 64 bit, the new drivers for a printer, goes \\servername, view the remote printers on a windows 7 64 bit pc, and adding drivers 64-bit configuration. On the print server, I can see in this printer, additional drivers x 64 windows XP and Windows Server 2003 driver installed.
  My first question is that correct? Shouldn´t I see something like windows 7?
  After that if I try to add the printer to the pc windows 7, is going to add a wireless network..., select a shared printer name, I always get the error as it is impossible to connect to the printer. Operation failed with error 0x0000007e.
  However if I try add, using a tcp/ip address or the hostname of the printer is installed ok.
  Is it possible that something to do with the driver? It is not picking up the right one?
  Thanks and rgs,
  Ricardo Mendes

  Hello

  This solution seems to have worked for multiple users.

  Note:

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  To connect to your server, start "regedit" and go:

  HKLM\SYSTEM\CurrentControlSet\Control\Print\Printer

  And remove the key, "BIDI" again try to install your printer, it should work.

• Problem with Windows 7 64 bit box

  Hello

  I have a dell inspiron 545MT with integrated hi-definition audio channels that came included

  I downloaded the HD audio driver on the dell site.

  I recently bought a pair of speakers Philips SPA7360 consisting of a subwoofer + 2 satellite.

  These works out of the box, plugged into the subwoofer low socket in Linux, so this is not a problem with the speakers

  To juggle with the HD controller under windows, I see

  stereo (which gives no sound)

  Quad-n/a

  5.1 + 7.1, where the left satellite loudspeaker works as the speaker "centre" and the right hand as the subwoofer in the tests... but on trying to play... There is no sound

  I only use windows for netflix and at the present time, can use the line-out socket which gives only through his right satellite speaker.

  Please note that I have reinstalled windows many times in the past without having to install the drivers from the CD, so I hope that's not the question

  Yes, it seems that you have a problem with this decision.

• Blue screen problems with Windows 7 64 bit

  It's my first time ever to come here so go easy on me if I have not posted correctly haha.
  Anyway, I came here to see if anyone can help if all goes well shed some light on the issues I'm having. I get these blue screens recently and below I have posted some of the recent issues. To follow and the State for the record that I am aware of a RAM problem that I'm trying to hash it out, but it seems not matter what I always blue screens. I am considering a complete replacement of the RAM, but before you start spending money I don't have I want to get some opinions more. I'll post what I can which may or may not help but any constructive contribution will be GREATLY appreciated.
  
  
  
  
  It's happened today:
  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information about the problem
  BCCode: 3B
  BCP1: 00000000C 0000005
  BCP2: FFFFF960002C66DC
  BCP3: FFFFF8800E988CB0
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1
  Bucket ID: X64_0x3B_win32k + 2566dc
  Information about the server: d597ded6-f553-4a5b-962c-9fef9d479eb8
  It took place on 26/04/13:
  Signature of the problem

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  Additional information about the problem

  BCCode: 101

  BCP1: 0000000000000031

  BCP2: 0000000000000000

  BCP3: FFFFF880009E9180

  BCP4: 0000000000000001

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Bucket ID: X64_CLOCK_WATCHDOG_TIMEOUT_4_PROC

  Information about the server: d179de1f-a3f4-4303-8fe7-d91692670210
  This happened on 24/04/13:
  
  
  Signature of the problem

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  Additional information about the problem

  BCCode: 1a

  BCP1: 0000000000041790

  BCP2: FFFFFA800135CB70

  BCP3: 000000000000FFFF

  BCP4: 0000000000000000

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Bucket ID: X64_0x1a_41790_nt! MiDeleteVirtualAddresses + 40330

  Information about the server: 407de12b-0f29-45e1-a934-e63146fe2f26
  I don't know if this is necessary, but I used my Steam to obtain more detailed information on my system. All that may be necessary let me know.

  Processor information:

  Seller: AuthenticAMD

  Speed: 2511 Mhz

  4 logical processors

  4 physical processors

  HyperThreading: unsupported

  FCMOV: supported

  SSE2: support

  SSE3: support

  SSSE3: unsupported

  SSE4a: support

  SSE41: unsupported

  SSE42: unsupported

  Version of the operating system:

  Windows 7 (64-bit)

  NTFS: support

  Crypto Provider codes: supported 311 0 x 0 0 x 0 0 x 0

  Video card:

  Driver: NVIDIA GeForce GTS 450

  Name of the DirectX driver: nvd3dum.dll

  Driver version: 9.18.13.1422

  The DirectX driver version: 9.18.13.1422

  Driver date: March 14, 2013

  Desktop color depth: 32 bits per pixel

  Monitor refresh rate: 59 Hz

  DirectX card: NVIDIA GeForce GTS 450

  VendorID: 0x10de

  Device ID: 0xdc4

  Number of monitors: 1

  Number of logical video cards: 1

  No SLI or Crossfire detected

  The main screen resolution: 1680 x 1050

  The desktop resolution: 1680 x 1050

  Main display size: 23,35 "x 14.57" (27,48 "diag)

  59.3 cm x 37.0 cm (69.8 cm diag)

  Main bus: PCI Express x 16

  Main VRAM: 1023 MB

  Supported MSAA modes: 2 x 4 x 8 x

  Sound card:

  Audio: speakers (VIA A high-definition

  Memory:

  RAM: Mb 6143

  Various:

  INTERFACE language: English

  Media type: DVD

  Total disk space: 152586 MB

  More great free block on the hard disk: 26355 Mb

  Humility101

  Sorry just missed your post.  22 of the 35 were directly related to the corruption of memory
  

  These accidents were caused by the corruption of memory (probably a driver).  Run these two tests to check your memory and find which driver is causing the problem.

  * Don't forget to download any other DMP files (especially those running auditor)

  * If you are overclocking reset all default before running these tests.
  In other words STOP!   If you don't know what it means that you're probably not

  1 - Memtest.
  * Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. http://www.memtest.org
  * Boot from the CD and let it run at least 5 or 6 passes.
  * Don't forget, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.
  * Test the sticks individually and if you find a good, test it in all slots.

  Any error is indicative of a memory problem.
  If a well-known stick fails in a slot of motherboard, it's probably the slot.
  
  2. Driver Verifier
  Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver.

  * But sometimes it will crash and will not tell you the driver.
  * At other times it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.
  * I would suggest that you first back up your data and make sure that you have access to another computer so you can contact us in case of problems.
  * Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).
  
  Here is the procedure:
  -Go to start and type "auditor" (without the quotes) and press enter
  -Select 'Create a custom settings (for code developers)' and click 'Next '.
  -Select "Select individual settings from the list complete" and click "Next".
  -Select the entire document except for "Low resource Simulation" and click "next".
  -Select "Select driver names from a list", then click "next".
  * Select all drivers that are NOT supplied by Microsoft and click on "Next".
  -On the next page, select "Finish".
  * Restart the system and wait as he crashed to blue screen.
  * Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.
  * If you are unable to Windows because it crashes too early, try safe mode.
  * If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

  * Further reading
  http://support.Microsoft.com/kb/244617

• Problems with Windows 7 64 bit IE

  I have windows 7 64-bit os and IE9 has been installed when I did the transfer of windows as a 32-bit I want to uninstall IE9 and instal IE11 but can't get rid of IE9 not tried the ususal, but it does not show even in programs and features to uninstall when I downloaded IE 11 it crashed not saying don't no need for my computer any help please

  Hello

  It is listed under "Installed updates"; delete it from there.

  "How to install or uninstall Internet Explorer 9?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9

  To uninstall Internet Explorer

  The following instructions apply to Windows 7 and Windows Vista.

  1. Click the button start , type programs and features in the search box and then click the display installed in the left pane updates.

  2. Under uninstall an update, scroll down to the Microsoft Windows section.

  3. Right-click Windows Internet Explorer 9 and click on uninstall and then, when you are prompted, click Yes.

  4. Click one of the following:

     • Restart now (to complete the process of uninstalling Internet Explorer 9 and restore the previous version of Internet Explorer).

     • Restart later

  See you soon.

• I have problems with Windows 7 64 bit connect my drives external iomega.

  A pop up keeps appearing saying 'it is the first time you tried to connect to these readers' even if I have linked dozens of times. This problem started about two months ago. With this pop up another 'permission' box pops up saying that I have to re - enter my credentials every time I turn on my laptop. Also, I noticed some of my iTunes songs download, but it says that the songs are there AND my automatic update for my laptop did not work. Any help would be great!

   

  Hello

  1. do you receive an error message when running automatic updates?

  2 have had any changes made to the computer before the show?

  Please follow the methods.

  Method 1:

  Run the troubleshooter from the link.

  See the link.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Run the troubleshooter for Windows Update problem.

  See the link.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  For any question related to iTunes, I would say to contact iTunes support team for assistance.

  https://discussions.Apple.com/community/iTunes/

• problems with windows vista 64-bit. I did not drive, the PC is HP brand,

  Windows does not start. a recent hardware or software change might be the cause.

  1 insert the disc
  2. choose the language
  3 click on repair

  If no disk so forth and so

  file: \boot\bcd
  status: 0xc000000f

  I can't access safe mode or recovery mode through the f - keys for some reason, the only things that I can get to are the installation and the bios screen. tried pulling the cord/battery and unplugging everything, even tried using WinRE neosmart but nothing not done, Im at my intelligence stop there...

  any suggestions?

  Hello

  If you do a cover, here is the information of HP:

  "Recover Windows Vista operating system using HP Recovery"

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  See you soon.

• Installed Windows 7 64 bit - 4 GB / 3 GB usable, whereas with Windows Vista 64-bit - 4 GB usable

  Hello
  I have the Asus N70SV B1.

  Specifications: (http://www.asus.com/Notebooks/Multimedia_Entertainment/N70Sv/#specifications)

  No problems with Windows Vista 64 bit, recognizing the 4 GB of RAM. After the upgrade to Windows 7 64-bit 4 GB installed / usable RAM problem / 3 gb. I also checked the following.

  1. I am running windows 7 64 bit, NOT 32 bit, I wouldn't be able to run Adobe After Effects® CS5.5 and Adobe first® Pro CS5.5 elsewise.
  2. the unusable 1 GB of RAM is not used by the operating system, it's hardware reserved
  3. the video card Nvidia GT 130 m 1 GB, shouldn't need that RAM - it certainly didn't on the factory installed Windows he dedicated RAM.
  4. I tried disabling and enabling msconfig - boot - Max memory settings, no option solves the problem.
  5. He has no option of memory in the BIOS settings to disable the cache in memory / memory the occultation.

  * I had to use the 64-bit of Windows Vista sound drivers work correctly with Windows 7 64 bit. So I thought that the version of bios or Vista 64 bit can thus solve the problem usable 4 / 3 gb.

  * Yes, I have flashed the bios to Windows Vista 64-bit and that still does not solve the problem. Although the system seems faster, it still shows only 3 GB usable.

  There should not be a problem with this bios version seen only with the 64 bit Vista OS recognized all 4 GB.  I am confused and have no idea where to go from here.

  Please help.

  Hello

   
  I suggest you to contact the manufacturer of the computer for help.
   
  Thank you!

• Display problems using Firefox with Windows 7, 64-bit

  Hi support them

  I have a new desktop computer running Windows 7, 64 bit.
  When I use Firefox version 3.6.8 to view my Web site, it displays everything out of alignment.
  If I use IE 8.0 it shows very well.
  If I use my laptop which is running Win XP site displays fine with IE 8.0 and Firefox.
  So I guess it may be a problem with Win 7, 64 bit and Firefox work well together.
  Is there a ready solution to help solve this problem or I have to wait until Firefox came out in a 64-bit version?

  Reset the page zoom on Web sites that have bad air: "view > Zoom > Reset" (Ctrl + 0 (zero))

  See http://kb.mozillazine.org/Zoom_text_of_web_pages

  See also the font size and zoom - increase the size of web pages and font size and zoom - increase the size of web pages and change use the sites of fonts and colors

  If you increased the minimum font size then try a lower setting (default is none) as too high can cause problems that you described.

  Tools > Options > Content : Fonts & Colors: Advanced > Minimum Font Size
  Tools > Options > Content : Fonts & Colors: Advanced > "Allow pages to choose their own fonts, instead of my selections above"
  

• Problem with windows update and Service pack 1 for Vista 32 bit.

  A screen will appear that says I need to download the Service Pack 1 for Vista. He also says that it is more optimal to download the much smaller file, through Windows Update, rather than on the site. But when I check the Windows Update, it did not for me to download. Update verification that history does not display it has been downloaded before, even if the other Windows updates have been. Do I need? Should I download the version + 400 MB of site or there at - it another way to download smaller files for my PC only? Any help appreciated. Thank you! Here is the text I copied and pasted pop up I got.

  ------------------------------------------------------------------------------------
   
  A problem with Windows Vista
  Windows Vista has stopped working properly.

  This problem has been corrected in Windows Vista Service Pack 1 (SP1).

  What is a service pack?

  An update to software that combines new security and performance with existing updates improvements. Service packs can contain new features or changes to the design of a product.

  To resolve this issue, follow these steps:
  Determine if your type of operating system 32-bit or 64-bit.

  How will I know if my system type is 32-bit or 64-bit?

  Click the Start button, right-click computer, and then click Properties.

  Under system, you can view the system type.

  The average of 32-bit and 64-bit?

  Both 32-bit and 64-bit refer manner that your computer (CPU) CPU processes information. The 32-bit versions and 64-bit Windows are designed for use in computers with 32-bit processors or 64-bit, respectively.

  For more information, go online and read this article for Windows Vista online help:

  32-bit and 64-bit Windows: frequently asked questions

  Check online at Microsoft Download Center to download and install Windows Vista Service Pack 1:

  Windows Vista Service Pack 1 for 32-bit systems
  Windows Vista Service Pack 1 for 64-bit systems
   
  -------------------------------------------------------------------------------

  In the end, P.S. - know what long and thank you in advance for taking the time to read and respond.

  In addition, unrelated question. Does anyone know why my computer would always have an icon in the lower right shows a storage device mass that I did not and when nothing is plugged into ONE of my USB remove locations?

  Ralleny,
  Regarding mass storage disks that appear, you have housing of memory card reader on your PC?  Usually they will appear like this.  I have a HP at home that has a Bay of 5 card reader to the front and I see the same type of items that you see. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with internet connection 64-bit Windows Vista, unexplained intermittent failure.

  original title: PROBLEM CONNECTING WINDOWS VISTA 64 BIT INTERNET - UNEXPLAINED INTERMITTENT OUTAGES

  On HP a6542p PC with factory installed Windows Vista (64-bit), Vista operating system program does not take account of Internet broadband, which, in reality, a good connection.  for the first 2 years of operation, the PC internet connection worked well, but a year ago, he started this OFF intermittent / WE internet problem.  SOMETIMES, I can manage to temporarily restore the internet after running randomly across the machine diagnostic & installation programs available to the home screen, OR SOMETIMES also after running REGEDIT in the start (search) bar and watching the TCP/IP settings (do not change them, just watch), but the internet connection drops again after the machine is idle for a few minutes.  I get very tired of the exercise Dog & Pony to run through the different random procedures & hoping that something will work.  I tried the fix from Microsoft using a flashdrive D/L from the Windows site to my XP machine and tried a few manual corrections proposed on various websites, but nothing seems to work.  I have no HP manufacturer disk to reload the Vista operating system.  The connection is good, the cable is good, but Vista gives me contradictory information about the diagnosis, such as ERROR 815, and he tells me also a cable is disconnected (not true, the cable is plugged & good & works very well when the Vista connection is restored), while another diagnostic message indicates the internet connection is good, at the same time other messages say is not.   What can I do to fix this problem in Vista?  Personal e-mail is: * address email is removed from the privacy * -I will check that URL of Web site for the possible answer.    Thanks in advance.

  Imrand - Thanks for the tip, I tried it & it didn't work.  However, I found an update of the HP driver for the network card Realtek in my machine, & after d/l this new driver, the problem seems to be fixed.  The Web connection is still good after several cycles of closing & reboot.  I'm not sure, because with this HP Vista PC, I can never be sure of anything, but I think the problem might be due to the rotating system off the NETWORK adapter in sleep mode, & so not put on when waking up.  Diagnostics messages confused and contradictory pages of different screen Windows were of NO use, it looks like the internet connection was good (which it was), while the other would be at the same time say there is no connection due to the disconnection of the cable, while the other at the same time say that the DNS server broadband couldn't recognize my internet query.  Total BS of Vista, which has compounded the problem than he was.  I only am not surprised Microsoft abandoned the Vista operating system so fast, so many other users of Vista have similar internet connection problems.  The user friendly and very stable XP operating system I have on an old PC of Insignia is my favorite.  Microsoft had to quit with it, IMO.

  Thanks for your help, Cimarron

• Dual monitor boot problem with Windows 7 Professional 64 bit after installation of any graphics program like a game.

  I have built this platform with the help of the owner of a store of 4 cumputer teir 2 years ago. We initially put Windows Vista 32 bit on the system to Vista 64 bit unstable atm. For 2 years, the computer worked like a dream. Last week I made a clean wipe of windows vista and windows 7 professional 64-bit installed. The system has two monitors. The primary monitor is a sony bravia with 26 "led and secondary for watching movies is that a 55 '' led Samsung 1080 p 240 Hz. The graphics card is a geforce GTX 295 nividia. It has 12 GB of Ram and the CPU is an i7 965 @3.20.

  The problem I have is this. After the installation of any game average to work with windows 7, the screens to reset their resolutions automatically more than a few times as they are confused. Sometimes, I have to return the screen to its correct resolution after installation in full. Most of the games and then run fine. After installing the game or any game designed for win 7 startup of computers is all messed up for the monitors. After starting hand 26 "sets its resolution and then after about a second 30 pause the computer makes the sound (the double) that it is resolutuons to reset monitor again? After that this second reset about 1-2 minutes the computer is good to go, unless it sets the res evil. The problem is the computer has never done that with vista and it is very annoying say the least. It still freezes the installation of some games. The only way to resolve what I found is the restoration of the system. The computer starts normally and screen ground is defined once she has always been. The only problem is when you install another game, the problem is their new. This problem is worse in some games.

  The latest nvidia drivers have been installed. There is no conflict in the device with the exception of an old printer Manager. The two comes is set to 60 hertz. I searched all over the internet and there seems to be a problem with windows 7 without solution. I am at a loss. Any other information that you need let me know and I'll post it. Thank you!

  Hi ancientone618,

  It sounds almost as if there is a Windows update that is in conflict with your NVIDIA Driver Installer.  I would say to disable automatic updates of Windows to see if it might help:

  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  In addition, please see the article with some useful information:

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Hi people, I try to install Lightroom 6 on my pc with Windows 7/64-bit, but the installation occurs an error message indicating that installation of this product under 'Vista' is not possible - but I'm on Windows 7, does anyone can solve this problem

  Hi people, I try to install Lightroom 6 on my pc with Windows 7/64-bit, but the installation occurs an error message indicating that installation of this product under 'Vista' is not possible - but I'm on Windows 7, does anyone can solve this problem?

  Hello

  Please see try to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

  Hope that helps!

  Kind regards

  Sheena

• Problem installing flash player 11.0.1.152 with Windows Vista 64-Bit

  Hello

  I can't get Flash Player to install on my computer with Windows Vista 64-Bit - is not serious if I try with Firefox, Opera or IE (usually, I use Firefox).

  The download is not a problem, but when I run the .exe downloaded, the file disappears from my download folder and nothing happens - not to mention that the launch of a process called install_flashplayer11x32_mssd_aih_3.exe, which does nothing. The usual installation popup never appears. After that I can not try to start the installation again, until the deactivation of the process via the Task Manager ("that one instance of this application can run"). No matter if I try the download and installation with or without 'McAffe security more' btw - same result.

  I have never had such a problem before - Flash Player 10.3 has been and no problem to install and use.

  I tried all the measures proposed in the troubleshooting section on the official website, including measures for advanced troubleshooting (uninstall the old version, run as administrator, disable the software firewall, disable antivirus, etc.). Nothing helps.

  I have never had these problems with my laptop running Windows 7 - just my desktop computer with Vista 64-bit.

  Any help would be greatly appreciated.

  Try to use installers of links in http://forums.adobe.com/thread/909550

  PS subject moved to the Installation section of the forum.

• Satellite U500 - problem with Windows 7 and HSDPA USB modem

  Hello
  My wife recently purchased a Toshiba Satellite U500, that came pre-installed with Windows 7 64-bit.

  A few days later, I bought a modem high-speed HSDPA USB by Alcatel. The problem started immediately that we plugged the modem, that drivers would not install.
  Then I went to the Web of Alcatel site and found the drivers for windows 7 for her. But then we hit another road block since now the drivers are installed and it does not detect the modem, but whenever we try to connect to the internet, screen flickers at the connection for a moment and then disconnects again.

  I found cela a lil strange so I tried to connect using my own pc which has a 32-bit Windows 7 and it works fine there.
  It is the same for a machine that still had Windows XP. Makes me think its something to do with 64-bit Windows 7 itself. Could someone help please?

  Thank you and best regards.

  I don't think that someone here can help you with this problem. You will be very happy if someone on this forum has exactly the same model of laptop including same USB modem.

  In my opinion, you have two options: either you can clarify this point with the support of Alcatel (they have enough experience with own products) or with people from the nearest Toshiba service provider service.

  Have you tried to test the features with the Win7 32-bit version?