Batttery

Similar Questions

• Computer laptop keyboard and mouse does not work (updated Bios and took the batttery)

  I have HP G60-530US.
  
  I read all the posts that talked about updating the BIOS and then by doing a hard reset by removing the power cable and speaking on the battery and then hit the power button for a minute or simply to leave the computer for several minutes.
  
  A lot of people seems to have solved their problems.  Not me.
  
  I updated the BIOS and also did the hard reset like 10 times.  What other options are there?
  
  I have Windows 7-64 bit.  This problem occurred after I did the updates windows 11/04/13 or 12/04/13.
  
  Mouse power switch and the power button wifi button keys are the only ones that seem to work.

  Hello

  Go back to the device, right click on the Device Manager and select uninstall - when it is finished, restart the laptop.

  Any change?

  Kind regards

  DP - K

• Question: what is a yellow circle near the batttery indication means?

  Hello!

  I bought a 8 GB Sansa Clip today from Wal-Mart. It has the latest firmware 2.01.16 and was fully charged out of the box.

  A small yellow circle appears immediately to the left of the battery icon - on the top line of the screen.

  I couldn't find it in the manual.

  No idea what this means?

  Thank you

  Found myself explanation in one of the messages - it's the status of aRhapsody light.

• Laptop plugged but not supported (batttery is good)

  I have the Acer Aspire 5810TZ-4657 model running on Vista. Everything works fine except when it is plugged in, he refuses to charge the battery.  I removed the battery and rebooted. My computer does not load at all. I know that the battery is good because it was working before and hold a charge for more than three hours. Now every time I have unplug my computer, I lose and restart the course. Is this a bug of Vista?

  Hello

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Acer - USA - Service and Support - drivers
  http://us.Acer.com/Acer/service.do?LanguageISOCtxParam=en&CTX2.c2att1=25&CountryISOCtxParam=us&ctx1g.c2att92=447&ctx1.att21k=1&CRC=3618978704

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  -----------------------------------------------------------------------------------------------------------------------------|

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Try this - to make a Restore Point

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each.
  RESTART which will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

• low power mode is on but the battery is full

  My Iphone 5 c run 9.3.1.  When I switch on the low power mode, it restricts my auto-lock to 30 seconds (it is grayed out).  The problem is with the low power mode on, my battery availability is 98% (appears in yellow), but the low power mode should be committed only to 20% or decrease of availability.  How do I fix it so low power does not come on until I get low on battery reserves?  Thank you!

  No matter how much energy batttery you left, if you activate the Low Power mode, the indicator lights yellow. My iPhone 5s has 80% battery left and I turned on the low power and the yellow light.

  Look at the screenshot of the iPhone here.

  IPhone low power - Apple Support Mode

• Tecra A1 does not light: amber, blinking

  My Tecra A1 used power on. Instead I just get a flashing amber power light.

  I tried the things:
  1. remove the AC adapeter
  1. Pwr light still flashes: the computer does not turn on

  2. remove the battery and the AC adpter. Insertion of the battery and pressing the power button
  2. when I remove the battery flashing disappears, when the battery is replaced, the computer won't turn on

  3. remove the power cord and batttery: replace the battery put then the cord - hit the button / stop
  3A. right when I reinstall the power cord, the power button blinks orange. Start button / stop does nothing.

  Only, the light blinks (or does nothing for that mater) when the power cord is in.

  In advance, thank you for the help.

  Hello

  Try to start your Tecra without battery just connect to the power supply.

  It is possible that this is a problem with the battery. If the power supply microcontroller detects an error lamp DC IN sends a blink code. Reading this code it is possible to know what the problem is.

  If you think the battery is defect contact service partner.

• Satellite A300D-151 not starting not don't logo, BIOS

  Hello

  I recently had problems with my A300D.

  During normal use, the screen has behaved weird, became white and normal several times until it stopped working. When I rebooted the green light, the DVD is available and I can detect two low beeps. That's all. No logo, no to enter bios, nothing.

  I tried remove the batttery, cut the power and press the power button for the minutes and start sto attemtpetd with and without battery to no gain.

  The computer is powered with a correct voltage (19.4 V measured) but does not start.
  What is the CMOS battery that needs to be replaced?
  Or bad memory?

  That indicates the only two beeps?
  Motherbooard defective?

  Any advice or ideas are appreciated.

  Thank you

  Dear KSM;

  as said it that your laptop is not on... *.
  * I think you should try this troubleshooting... *.
  * first of all remove the battery and adapter so the laptop, then hold the button the button up to 30 dry *.
  * then release the power button and just plug your adapter from the laptop and turn on the laptop *.
  * and check works or not... *.
  * If your problem is not corrected, then you need to visit your service station nearest may be that it's hardware.

  * Thank you *.

• Had to remove my battery to start my Satellite A200

  My laptop Toshiba Satellite A200 after allmost 4 years of use on shutdown remained with the

  "Power on led" lights up on the systray and refused to start when I hold down the Power button.

  When the Batttery was deleted and I tried to start with cable AC power adapter, it starts as usual

  without any problem.

  The model is A200 - 1 M 4

  Model No.: PSAEOE - 04E029GE

  DC19V 3.4 HAS

  Made in China IT.

  So far, my battery has been recharged effectively

  and kept the load when unused for at least 5 days. When I

  a pluging in the AC/DC adaptor the led turned blue in a few

  minutes, anyway it was never orange flashing.

  Until recently, with the AC adapter disconnected with my recharged cable

  battery I could follow work for at least a year and a half hours.

  Can I check the status of the battery before replacing?

  Should I be looking for another vice of repair or not my battery needs replacement.

  Can someone try to help.

  Thank you.
  .

  Thank you for your comments.

• Satellite A100 - will not charge the battery

  Hello

  I have ned to help. My Satellite A100 will not charge the battery. He works the power adaptor for the led indicates charging status, battery shows 1% of loading tatus information, but none does change - no loading any time. When disconnected everything just stops off like normal desktop.

  I've already put battery in and out, made upgrades to the antivir software, makes Toshiba controls, tests, but what ever he did did not any change. If there is no way for restoration of battery how to check what the problem is I have no second battery or AC I can always buy new batttery but I don't know if the old one is broken and weather new would work properly?

  Best regards
  pawelg

  Hi pawelg,

  I agree with the user above. The battery can be charged only up to 500 times, and after that, it must be replaced. I think it's the case now, I mean that everything works correctly on the AC adapter so I think that the battery must be the reason for this.

  By the way: you can buy a new battery to an authorized service provider. ;)

• Satellite C660: Wireless Internet when remove the power supply drops

  Hello
  new Tosh Satellite C660 laptop works fine when the power supply cord is connected, soon as directed power is removed drops internet connection, usually to the second web page (the first web page is accessible, failure occurs usually when you try to access a new page)

  When I connect the power cable, internet connectivity returns as usual!

  I've been on the Advanced page setings power management,
  I have power settings "balanced" set up, and for the realtek card wireless put the plug and batttery power to maaximum settings (before they were to the maximum for diet and balanced for battery) even if it has no impact.

  The connection between the laptop and the wireless box seems 'excellent' level, the internet is the element which is a failure.

  I use the standard realteck card from the laptop (Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC) a D-Link Wireless N Router (DIR-615 ver1.00) and standard Modem provided by Virginmedia who bring them my services to wide band.

  All suggestions are welcome!
  Rick

  Hello

  Try the Realtek WLan driver Realtek page.
  www.Realtek.com.tw

  I read here in the forum that it has helped to get rid of these questions.
  Of course, you must also disable as mentioned in your message to save energy.

  Here, the other thread which confirms this driver update allows:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=58112

• Equium L10: Problem with the main battery and battery RTC

  Hello

  I have the Toshiba Equium L10 and it is about 14 months old and I have problems with the battery and how much time it takes after a full charge. I also have problems with the RTC battery and an ERROR 0271: check date and time settings message when I turn on the laptop.

  Regarding the battery, I can fully charge it upward in about 3 hours, but when I start to use it, apparently in the last few hours around one and a half or so and then it needs to be recharged. I can have down for about 40 minutes and then turn it off and come back later or in a day or two. How long should I expect from a fully charged battery?

  About the batttery RTC, it really becomes a pain and I only started to get the message of the ERROR 0271 start-up, in recent weeks. I can charge the battery pack and then leave for a few days, but when I turn it on, I get the message ERROR 0271 on the date and time incorrect. Surely after a full charge, the RTC battery should last longer than a few days?

  The manual says that if the RTC battery is exhausted or becomes weak, you must charge the battery of the CCF for 24 hours, in a different part of this manual indicates between 24 and 48 hours, but how can load you for long when the sections concerning the charging battery pack status after charging the battery you unplug the power adapter because leaving connected will shorten the life expectancy of the Battery Pack. So, how we can charge the battery of the CCF for 24 to 48 hours if we shouldn't leave the AC adapter plugged in once the battery is charged - which is nearly three hours. Suggestions about these problems would be appreciated.

  Besides we all know that it is easy to change the CMOS/RTC battery in your desktop base unit, but is it easy to change in a Toshiba Equium L10?

  Concerning

  Brave0

  Hi Brave0,

  The normal recommendation for the CMOS (RTC) battery is to leave the laptop connected to the power supply at least 12 hours when the main battery is fully charged. The charging circuit is going to hijack the current to the load automatically RTC battery and no current will be forwarded to your main battery.

  Recommendation do not leave the power adapter is plugged in the main battery is fully charged is really only applicable to older laptops that used no batteries Li - ion and therefore they had to be completely discharged before recharging to avoid any effect 'memory' of the battery.

  With modern Li-ion batteries, it is quite safe to leave the battery when fully charged and still power the laptop from the AC adapter. The charging circuit will pass all the battery charge if it is fully charged.

  Kind regards

• battery not detected after flashing the BIOS

  first time here, need help! I have HP dv4 1030ee with Vista Home Premium. 2 days ago I noticed that my battery is always on 3% of AC power is connected and supported. I'm looking for how to fix the situation and found that there is a new update of the BIOS available on the HP website on this issue. So, I downloaded the program and flashed my BIOS. Flashing went well, but when I rebooted, the OS can't detect my Batttery! So far, my computer works on the current! My Bios version was F.06 and I have updated with the latest F.24. Somewhere, something was not... need help... my HP laptop is only 2 MONTHS OLD!

  HP PAVILION dv4 1030ee, Vista Home Premium SP2, Intel Centrino 2 P7350, 2.0 GHz, 2 GB of RAM, NVIDIA GeForce 9200 M GS 256 MB

  Try removing the battery and starting only with power cord. Next stop then reinsert the battery.

• HP G72-250US screen remains black on power. hear the fans and light is on but no go

  I work with a HP G72-250US laptop and using Windows 7 64-bit Intel Core.

  Mhz core 2 [email protected]

  Sorry for the long story. Thank you for using Gheagyrn! me. What is the mother board or the hard drive?

  Replaced the screen due to the vertical and horizontal lines in color. Computer worked sometimes normal. I thought it was fixed but then while doing a HP Diagnostics program the computer says shut down because the situation batttery likely to damage the computer. I tested the AC adapter. I installed a new battery and as a first step, it still worked. I have updated and scanned with AVG & Malwarebytes. Do you have another HP diagnosis and at one point was told to restart. Never, he was still alive at this point.

  There is no switch on the led power and W/LAN (12 F). Blue lights run on times indicating Cap locks and locks numbers are engaged. I did a full factory restore before it came to this point and updated bios (for F 37) and downloaded the updates of graphics chipsets too. (after the screen is installed) The only thing it does now, it's making noise at startup and power led lights now light guard cycling. (light, light on) every ten seconds.

  Hello Gheagyrn, welcome to the forums of HP.

  I see that after replacing the screen, you have since fallen on an issue where the notebook does not start. The display is empty and have a blinking light. I will do my best to help you with this problem.

  I recommend starting with these documents:
  Computer does not start and the lights blink or the computer will beep
  Troubleshooting of black screens with no start-up or start-up error message

  These should test you the material to see if something specific causing the error. The document can also help determine if there is a code of error being indicated by your laptop.

  Start with the above, please let me know the results.
  Thanks for posting on the HP Forums.

• Cyber-shot DSC-P100 pic view very blue sky

  My camera is 10 years (Cyber-shot DSC-P100 and until that time, no problem.)

  Problem: When you try to view the photos from the memory card or take those pictures become almost 'ghostly' very light blue or as an old "negative." I bought a new batttery lithium thinking there had to be a but prob continues. It turns out that the battery is fine. But the problem persists.

  Background: a month ago I was taking pictures of friends sports game and I accidentally pushed the movie mode. I tried to change back to still images, but not able to do. If I pushed a worng framework without my glasses... do not know how to trouble shoot since I can not find the manual.

  So two questions.

  Q1 How can I activate video recording mode?

  Q2 How can I get rid of the mode clear blue appearance on all my photos?

  Thank you

  bbear1

  I presume it is the camera?
  http://www.cameras.co.UK/details/Sony-DSC-P100.cfm

  You have a dial to the Middle top, which has all of your pictures modes, an excerpt, and film. Probably you have it shot on film, turn as well as the dial until the marker bit on the left dashboard points to P or the small picture with the Green camera for fully automatic mode. This should take you off video recording.

  For the blue tint, you may accidentally changed the white balance.

  By pressing the menu button should show the standard settings - look for WB (white balance), and you can put it back on AWB (auto white balance).
  I hope that this should be the cause of your ghostly photos.

  If this isn't the case, it could be the sensor is dying, but I guess that's not.

  Good luck

• portable computer does not support. Yet battery monitor says "plugged in, not support.» What are some options?

  my laptop is connected, and yet power monitor says "plugged in, does not support." What are some solutions?

  Hi Joseph,.

  Something similar just happened to me. The first time they fixed it, they have replaced the adapter and the problem is solved. 5 months later it started to happen again and this time they replaced the battery, the motherboard and the milling table (thanks to heaven, it is still under warranty). Fortunately, thanks to the new adapters, battery started to load and the experience does not seem to damage it in any way (but you should keep your eyes on it anyway just in case).

  How they were able to say on my laptop - a Dell E1705 (other than just experience and common sense) was to go into the BIOS (starts, it should be a brief Flash on the screen telling you how to enter the BIOS setup or menu of the BIOS (usually F2) and check the battery information. He showed that the power adapter 'unidentified' instead "90W" list which should be when it is working properly and that the battery was not complete and not charging well plugged. They changed the motherboard and the roll the second time because it could also cause the adapter is not being recognized by the battery (or battery not not recognize the adapter).

  The beep is caused by power and its configured settings to warn you of a low and critical battery condition. In a normal situation, the computer will work right next to the power adapter and does not the battery (it is a way to help maintain the battery life is to run periodically and refill if we leave normally plugged in most of the time). If you remove the batttery entirely, the laptop will power? If this isn't the case, it is certainly at least the adapter or the motherboard. Eventually the battery will get if low, that he's going to sleep or hibernation, or the system stops (you should shut down normally before him to cold shutdown like that). If If, then I expect the tone to go further because it will detect is no longer a low battery charge, because there is no battery - but then you'll want to be sure to use either a battery backup UPS, or at least a surge protector otherwise already in place because if you lose the laptop battery will crash hard and this is not good for her.

  I'm using 32 bit Vista Business SP2 and in Control Panel / sounds / Sounds there is an option for low battery alert. The default to have this. In this case, you can turn off to avoid the beep. In addition, you can go into Control Panel / Power Options, click the plan settings and click on battery. It will provide you with levels of low battery and critical battery and you provide measures to be taken in such a case. If you are unable to operate the system without battery and it is so weak that the alerts began, you probably fell to 11-5% remaining. You can adjust actions to nothing for bass and stop to criticism that 5% is about as close as you want to get to the point where you can hang. Then, you just need to wait until it is repaired and the appropriate parts are replaced.

  Even if you have still some life in it, it is best to contact the manufacturer (they the some have the right parts) or a computer of reputable workshop to get a good diagnosis (perhaps by phone at first), a determination of what must be fixed, the applicable fees, schedule, if it is still under any kind of warranty , and what needs to be done in which order of repair. They can find the adapter is OK and it is just the battery (or vice-versa or two or more). But that's essentially where you need start.

  I hope this helps.

  Good luck!