BB of Smartphones blackBerry charging docking station does not

Similar Questions

• Ports of billing to the USE of the docking station does not

  I have a tablet of w700 acer iconia, the usb port on works actually compressed, but the usb three extra ports on the docking station do not work. How can I solve this problem?

  You have the power connected to the dock?  The USB ports on the dock will only work if the power is connected.  (If this isn't the problem, you can have a defective dock).

• Smartphones blackBerry Torch Docking Station

  Someone made a such docking station to recharge the battery?

  GoTo

  http://www.ShopBlackBerry.com/

  I used a pod before synchronization and works well, allows with PC sync or Charger just to load

  http://store.ShopBlackBerry.com/product/BlackBerryTorch9800SyncPod/ASY-14396-013

• Smartphones blackBerry 9900 data Plan does not work!

  Hi, new here, great site!

  I'm from Canada, with Koodo and bought a unlocked 9900 opportunity, my neighbor via a Classifieds site, and as much as I know it was his business phone.
  I wiped it it clean and improved the operating system to 7.01

  I noticed that the previous service logo remains still (Rogers) during boot-up/shutdown, hmm, OK whatever he is working with Koodo.

  I called Koodo to allow data, but nothing works. I called them and they told me to enter "bb.koodo.com" in the APN field with no username and password. Then to save the host Routing Table (he told me that he registered very well) but I did not receive a message. Also, we have removed battery and tried everything again. It still does not.

  It is H + at the top right of the screen, but who has always been there.

  She said that maybe the phone was restriction IP since I bought it used, and maybe BB Swiss Army tool could help me get off, but she didn't know how. So I downloaded and pushed some buttons (more precisely remove COD) and really messed up my phone... lol

  Just reinstalled OS7.01 once again and fortunately had a fairly recent backup.

  Suggestions for making data work, or do I need a new phone?

  Hello and welcome to the community!

  Serious9900 wrote:

  bought an unlocked 9900 used my neighbor via a Classifieds site, and AFAIK it was his business phone.

  Let's start there, because who can be tricky depending on what exactly is meant by "business phone". Reference:

  • Article ID: KB05099 Steps to take before selling or after the purchase of a used BlackBerry smartphone

  Many of the steps can only be carried out by the seller... for example, if the prior carrier still has a BIS account allocated to that specific device, so no other carrier will be able to create a BIS account for her, and a BIS account is required to use wisely. As a general rule, a carrier will come out only the BB from the account when the real account holder made the request... and you will not if this situation applies.

  In addition, if the device has been activated BES, you need to follow additional steps. Reference:

  • Article ID: KB30076 How to check for an it on a BlackBerry smartphone policy

  If there is an IT strategy, then there are a special method, you need to remove it, but it will be successful if the BES server, to which the device has been set already has the removed feature of it... you may need to ask the previous owner about it. If this BES server was deleted, you can use this method to clean up the it policy:

  • Article ID: KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

  It is necessary to use this exact method... refer:

  • Article ID: KB16307 Actions performed by the BlackBerry smartphone during the removal of the user stored and application data

  Now, with all these preliminaries of the road...

  Serious9900 wrote:

  I noticed that the previous service logo remains still (Rogers) during boot-up/shutdown, hmm, OK whatever he is working with Koodo.

  As you guessed, it's irrelevant. BBs are still originally designed for a specific carrier... and some of these contractual carriers with BB to place a splash screen of starting the device ROM, that can never be changed. But, it does nothing other that that unit was built for this carrier... but as long as all other things correctly, it is not serious at all.

  But, to be clear, when you say "it works on Koodo", I guess that's your voice services? And are all now, you must operate your data services? If telephone services do not work correctly on Koodo, then it is useless trying to get data services going.

  Serious9900 wrote:

  I called Koodo to allow data, but nothing works. I called them and they told me to enter "bb.koodo.com" in the APN field with no username and password. Then to save the host Routing Table (he told me that he registered very well) but I did not receive a message. Also, we have removed battery and tried everything again. It still does not.

  But now say you "nothing works"... should I continue to assume this are information specific to the data, and that telephone services continue to operate properly on Koodo? Sorry for being blunt, but clarity is critical or waste us time on unnecessary things.

  When you say "he told me that he registered very well", which means exactly please? This means that he said something like 'Check pending', 'Record sent' or some other message popup? Once again, here the clarity is critical. If that's what you saw, then indeed it is not registered correctly. Rather, he made the application very well... but until the enrollment message arrives in the Messages application, then the intervention is required since the data network of the carrier did not and until it nothing for the data will be working.

  Serious9900 wrote:

  It is H + at the top right of the screen, but who has always been there.

  Upper case H +? Once again, just double check, since if she was tiny, that it would mean something completely different from that of capital letters. Top of case, this is what it must be.

  Serious9900 wrote:

  She said that perhaps the phone restriction IP since I bought it used

  I don't know what she thought about it. May be restriction of BES and if the above process I gave you can purify that.

  Serious9900 wrote:
  and that maybe BB Swiss Army tool could help me to remove, but she didn't know how. So I downloaded and pushed some buttons (more precisely remove COD) and really messed up my phone... lol

  Never good to a few buttons when you don't know what you do... I don't remember if BBSAK is able to remove political or not, but it can do a very good cleaning.

  Serious9900 wrote:

  Just reinstalled OS7.01 once again and fortunately had a fairly recent backup.

  And that could be part of your problems. If, for example, the device has one IT political edge, while part of a full process... which means that even if you happen to clean off, a complete restoration simply will return to the instrument, turning to your right back to where you started backup/restore. Instead, to do only a partial backup or restore, and more precisely to avoid data bases that have to do with THIS, political, business or something similar... the conservative approach is to only to backup/restore of critical databases you need (for example, contacts, calendar) and manually reconfigure the rest. Remove a policy is a tricky thing.

  Serious9900 wrote:

  Suggestions for making data work, or do I need a new phone?

  I think you have enough to start on top. Another question about whether Koodo, however, is if their network is configured to auto-fill your specific with entries HRT device model and service book. If their network is not, while actually explains everything. No carriers configure their network to support all models of BB... each one chooses a subset of the model numbers of BB and configure their network accordingly. But trying to use a model number BB on a carrier network that is NOT configured for this model results in number exactly what you live... their network will not automatically grow some HRT and SB entries on your device because their network does not recognize your device as a model BB number taken in charge.

  Looking at a reference that I can find, it seems that Koodo is configured for the 9360, 9300, 8530 and 9790. But not for the 9900. Now, is that with a proverbial grain of salt... that reference does not necessarily mean that the network of Koodo is not configured for the 9900, it's just an indicator that is not. Koodo can only tell you that answer for you.

  Good luck and let us know!

• Smartphones blackBerry device software upgrade, does not (Bold 9930)

  Bold 9930, Verizon,.

  Everything was going well 5 hours ago. Backup and synchronization with Desktop Manager and everything was good. I clicked on the 'Device upgrade' link. He me everything first download and install the new Desktop Manager software. This seemed to work properly. Then it downloaded the new software device and conclusive to upgrade of the unit.

  7.1 bundle, 2705 (v7.1.0.991 platform 5.1.0.678)

  The Setup program indicates that the new software has been installed, and then it seems to want to reboot the device. The device never returns, ends with an App error 606.

  I loaded the cool device software, without change. Removed Software Desktop, loaded fresh, then loaded a fresh device software, without change.

  I tried to load my old device software but the Desktop Manager will not allow him.

  I reloaded software device 3 times, always the same behavior, always the same error at the end.

  I'm out of ideas.

  Any help?

  Hello and welcome to the community!

  brunostyle wrote:

  I tried to load my old device software but the Desktop Manager will not allow him.

  This bit is quite unusual... done correctly, you can force any OS on your BB package as long as it's your exact model number. So I'm not sure if you're really using all the good stuff... so, even if a lot of this will be redundant, please examine carefully for subtle tricks do you need to... done correctly, this can heal the situation. But any errors on the way (not ignored, stage not completed correctly, etc.) invalidates the whole process and translates the automatic process of support and limited to only the OS packages currently supported by your specific carrier.

  The easiest way is, on a PC (you can not do on MAC):

  (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

  6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

  You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

  You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

  1. Load your OS "bare bones"... If everything is optional, do not install it.
  2. If the behavior is immediately, then try another OS with step 1
  3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
  4. Add one more thing - no matter how tempting, one.
  5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
  6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

  When the behavior shows up, you know the culprit... the last thing you have loaded.

  If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

  If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• BlackBerry Smartphones Blackberry 8520 wiped and does not show error 507

  Hi, I recently wiped my blackberry 8520 OS with BBSAK and started to install another OS, in the process, the USB cable somehow has been disconnected and installation has failed. Now the phone just to start, turn on for about 3 seconds shows nothing and then turns off. It does not show same error 507. Help, please

  Hello and welcome to the community!

  You may need to use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  Good luck and let us know!

• BlackBerry Smartphones Blackberry Bold 9870 trackball does not

  I noticed that my trackball to delay a few seconds earlier this week.  4 days later the trackball does NOT work.  Can someone please.

  Is it possible to navigate in the BlackBerry smartphone without using the trackball.  If this is not the case, what would you recommend to me.  I backed up everything but my guardian of password (I don't think that can be saved).

  

  I found a few articles, but I highly recommend that you take to a repair shop.

  Don't know how well it will work for you.

  http://www.ehow.com/how_8015930_navigate-BlackBerrys-trackballs.html

  http://www.mademan.com/mm/how-navigate-BlackBerry-no-trackball.html

  http://www.YouTube.com/watch?v=xeaDOiN2ipw&feature=related

  Sorry its does not work for you.

• BlackBerry Smartphones Blackberry Storm my computer does not recognize my PIN code

  My computer does not recognize my Blackberry Storm when it is connected. Recently, I've updated the software on my phone to 4.7. The desktop software was still in 4.3. On Sunday, I connected the phone to my computer, and it was the beginning of my question. I uninstalled the software from my PC. Then I reinstalled the software updated since the BB site. But I still have the same question. I see an icon at the bottom right of my window that says: "Device disconnected", while in the box PIN number it says, 'NONE '. I don't know if the problem is with the USB cable. When it is connected to my phone, the phone is in charging mode.

  Any advice on what to do?

  jbriones wrote:

  My computer does not recognize my Blackberry Storm when it is connected. Recently, I've updated the software on my phone to 4.7. The desktop software was still in 4.3. On Sunday, I connected the phone to my computer, and it was the beginning of my question. I uninstalled the software from my PC. Then I reinstalled the software updated since the BB site. But I still have the same question. I see an icon at the bottom right of my window that says: "Device disconnected", while in the box PIN number it says, 'NONE '. I don't know if the problem is with the USB cable. When it is connected to my phone, the phone is in charging mode.

  Any advice on what to do?

  Most of the time a simple battery pull will correct this problem.

  Try to do a battery pull... Remove the battery with device 'ON' wait 20-30 seconds and replace the battery, wait for the device to restart (reboot may take up to 2 minuets)

  Mine will also do what you explain and a battery pull will clear up right ir.

• X 2 elite 1012 G1: HP Elite Thunderbolt 3 65W USB - C docking station does not not on Elite X 2 1012 G1

  Hello

  I just got the USB docking station - C HP Elite Thunderbolt 3 65W.

  I plugged in and my Elite X 2 1012 G1 fresh, but that's all. No ports do not work. The monitor is not recognized or the other.

  If I plug in my phone via USB, it loads, but not recognize it as a storage device.

  I have looked everywhere and can not find drivers that will solve this problem.

  I have:

  -Shot lightning software installed and running, but still without success.

  -Installed and running "Intel Thunderbolt Firmware Update Utility", but get an error that there is no controller driver.

  Help, please.

  PS. The machine was reimagee with an SOE enterprise. So I don't know if I am missing drivers.

  OK problem is finally resolved.

  Rebuilt everything. Everything is OK now.

  Workstation.

  Lightning blow job.

  Happy customer!

• Audio port Ultra Dock docking station does not

  I have a laptop ThinkPad X 240 with Windows Enterprise 8.1 x 64 installed. His plays very well from the speakers of the laptop, and when I plug in external speakers on the computer portable 3.5 mm audio port, they work very well also.

  But... when the phone is rooted in my Ultra Dock 90W docking station and external speaker cable is plugged into the dock's audio port, there is no sound. If I play music through the laptop speakers, as soon as I plug a cable into the audio port dock, no sound is produced. I can still use the laptop's audio port to connect external speakers, but that defeats the purpose of having an audio port on the Dock Ultra.

  Dock Ultra has (I think) the latest firmware installed (version 2.22.000) and I have the latest audio drivers installed: in Device Manager > sound, video and game controllers > Realtek High Definition Audio > driver version is 6.0.1.7188 which is the last available Lenovo support downloads.

  What should I do to get the Ultra audio port Dock works?

  Kind regards

  / Neil

  PS. apologies - I have wrong posted this message on the map "of tablet computers laptop ThinkPad X series. A moderator can you please remove the post of this Council?

  Hi Nwgarside,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with Audio only works not the Ultra docking with your ThinkPad X 240.

  Did you check different system with docking station / Ultra?

  Check with the ThinkVantage System Update tool, running so that it will update all the required drivers and application of your system.

  I hope this helps.

  Best regards

  Agnes Kumar

• The boot on my iMac drive is full for the docking station does not,.

  My boot drive is full, so will not show the dock, I can't see the files to delete and make more space. Safari works well, and the files on the drop down menu Apple I have opened recently, always open, so I don't think that the iMac is broken - full. How can I get files to delete and make more room?

  Start safe mode and delete or move files and applications is no longer, you need or use ff of the drive up you jave enough space. DO NOT delete system files or you could end up with a very unstable system. You can move large libraries like your music, pictures and videos on an external drive.

  Try safe mode if your Mac does not end commissioning - Apple Support

• Windows Defender does not allow me to run full spyware analysis and dell docking station does not open

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I have problems with 2 programs

  1 Iam trying to run a full scan to see if I have any spyware on my computer and I can't because Windows defender does not open or does not

  2 Dell Dock doesn't open because the language file was not able to load and I can't find any information on the dell dock

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  RE: Dell dock
  Try uninstalling dell dock > and then reinstall.
  Link to DellDock: http://www.delldock.com/

  Or contact Dell technical support. Link to it: http://support.dell.com/

  t-4-2

• Smartphones blackBerry Desktop Device password does not work

  When I connect my Storm to my PC via a cable ubs, a pop-up box to request my password for the device, but it does not accept my correct password.  I guess that's the same password I use on my device each time that I unlock it. I tried turning power switch digital lock but still does not work.

  I have 'Safe' switch off my camera and then disable the password on the device before plugging it back it.

  What hassle.  Any solution?

  Thank you.

  Do you have a digital password?  What I mean is, you keep the storm in portrait mode when you enter your password on the device and it is a series of numbers?  If so, this translates into the storm than the alpha characters, which you can use on your pc.  For example, if your password is 369, and that's what you enter on the storm when you hold the device using the appeal on its merits, then your password if you notice the characters entered so alpha characters are 369 is actually dmw.

• Smartphones blackBerry BB 9700 - peripheral does not work beyond a minute

  Hello

  I've updated the software of my BB Bold 9700 ver 5.0 to 6.0 Bundle 2475 worm. Now when I restart my machine, it works well for around a minute but then it gets hung and I can't use it any more. I tried to connect with BB Desktop Software but the problem persists. Please provide a solution for this. One of the reasons for this could be inadequate phone memory. So is there a way I can get back to ver 5.0 now?

  Hi nikitshah1790

  Its a choice the user is he wants to stay on OS6 on the bold 9700, but 15 MB is not leaving a good memory to run your BlackBerry smartphone, you can't open multiple tab on your browser at any time or can not run more then two applications to an instance or your device will freeze or crash.

  You can try to remove language packs from your device, it will give some media of memory.enable support on the card device, also make a regular backup of all of your messages or emails and delete all old messages at regular intervals, otherwise they will be removed from the unit due to low memory. Please go through this Knowledge Base on how to increase free memory:

  KB14320  How to maximize the battery life and available memory on the BlackBerry smartphone.

   

  Once you have install OS 6 on your device previous OS 5 is no longer on your device has been deleted automatically. After any OS update, we should try those below mentioned step which I think he's going to solve all your problems related to connectivity of devices to your network.

  1 - Save your pocket computer.

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • You expect a registration messages in your Inbox messages.

  2 send your Service book

  • KB02830 Send the directories for the BlackBerry Internet Service

  3. and then do a restart of battery like that pull while the device is powered on remove your battery wait for a min. then reinsert back

  Try it and tell us. And you can always return to the previous operating system when you feel its necessary.

  Prince

  ______________________________________________________________________________

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• Smartphones blackBerry "BOLD" Volume controls does not work

  Good day to all,

  I've had my "BOLD" for about a month now. When I got there, I was able to adjust the handset volume during calls or when you listen to the music by pressing the buttons of the volume control on the right side of the phone. However, the buttons just stopped one day and I can't adjust the volume in all applications. At the present time, my hands-free game is stuck at half volume, my phone calls are at full volume and music is at 75% volume. Is there a setting that uses by default the volume for each application or my buttons volume likely to be spoiled.

  Thank you for your time in reading this and hope someone can enlighten me on that.

  Hi jzachlee,

  Welcome to BlackBerry Support Community.

  If the press does reflect no change in the volume then it must be a hardware problem. As you mentioned that your unit is a month and you're still able to claim the guarantee. You would be better due to the device to change.