BBM Bbm surveys on the iPhone display of the image is not displayed

Similar Questions

• I get emails with pictures and when I send them to others. they open them but the images are not displayed. The photos are there when I send them. Thank you

  I get emails with pictures and when I send them to others. they open
  their place but the images are not displayed. The photos are there when I send a
  them. Thank you

  Make sure that your security software (antivirus) is not blocking attachments.

• I have a hp m175nw printer. email prints from my iphone, but the image does not work

  M175nw printer. email prints from my iphone, but the image does not work

  If the DPI (dots per inch) is less than 100, the printer will not print the photo because it would be too low in quality. Draw the image on the computer, then right-click on it and click Properties, check the horizontal and vertical dpi and see if these figures are less than 100. Have you tried to connect the iPhone to the same network as the printer and try to AirPrint peak? AirPrint road doesn't have the same requirements on IPR as the ePrint.

• When I open Photoshop CS6, the image does not appear in Photoshop. The image IS open, i.e. the name of the file is displayed on a tab and the image layers appear in the layer panel. What is going on?

  Photoshop and Bridge is open as usual. But when I open an image, the image does not show in the area of the image. The image filename is show in a tab and the spectacle of layers in the Panel layer. What is happening and how to fix this.

  I solved the problem. It was somehow connected to my using Microsoft

  photos of theme. I put Windows to use the basic theme and the problem

  went. Thanks for the suggestions.

  HA!

• Change the size of the resolution and the image does not change the result on the screen?

  
  I use Photoshop CS3. I'm changing the resolution of several images that will be printed in a newspaper. So the current images are 72 dpi and really huge - for example 36 x 27 inches (size of the document), and when I change it to 300 dpi, the size of the image to reduce to about 8 x 6 inches, as I hope. But the image I see on the screen does not change. Thus, for example, when I open the image originally, it's 33% and the entire image is visible. After I change the resolution and the size of the image has changed accordingly, the image appears to be always the same and it remains at 33%. The image should not shrink on the screen because its size has been reduced? Or if she stays the same on the screen, the percentage should not change? I mean if the size of the document is now 8 x 6, it should be able to display at 100% and not to fill my whole screen... I'm so confused. Thank you...

  Gradded,

  The "Size of the Document" of the dialog box size of the Image is just to specify the size (in inches) that your document will be printed. The ppi adjustment has nothing to do with what is displayed on your monitor. Your monitor does not care something about PPI. The monitor contains a number of pixels and after you change this setting, ppp, the monitor will always be the same number of pixels.

  As long as you leave the box "Resampling" disabled, will not change the size of your image (pixel Dimensions). You won't see any change on your monitor. If you check "Resample", then the size (in pixels) of your image will change.

  I hope this helps.

• I added an image as a signature that works very well if a new message an email, however, the signature of the image is not added when I reply to an e-mail message?

  I added an image as a signature when a set my e-mail account. This image is added successfully when I compose a new email. When I reply to an e-mail message, the image is not added, and I have to manually copy it from a newly formed email. I assumed that there should be a way around this?

  Account settings of GOTO and look under the section Composition & addressing. There are two check boxes to include signatures in the responses and transfers.

• IMAQ Vision: The image is not big enough for the operation (Imaq WriteToPNG.vi)

  Hi all

  I was stuck for a few days trying to get my work VI and get this error. It is as simple as to save a graph of intensity as an IMG, he works with JPEG formats but my graph is U16 grayscale and it is not supported by the jpeg format so I didn't get the expected results. Then I went to the PNG format and the error "the image is not big enough for that operation" appeared. I tried to resize as aid error NOR suggest, and got the same error, anyone has an idea on what could be the problem?

  Hello Bob,

  Thanks for the tips, I'll post my code in future issues (since I already solved this one). As you say, there was something wrong with my code, the code in the image actually worked well, but doesn't have the part where I wrote to the variable (the variable was not being written if its value is an array of 0x0, not big enough actually). Thank you!

• Down on the Image, but not on the mouse scroll bar event?

  Hi all

  I use an event "Mouse Down" on an image to save the coordinates X and Y of the click and increment a counter.  My problem is that I'm looking at an image with a scroll bar that I want to use to set what part of the image is visible.  When I click on the scroll bar, I set off the mouse event down and increments the counter, which I won't do.

  Is there a way to implement a mouse event to the bottom so that it will ignore clicks on the image scroll bars?  If not, can you think of another way to accomplish what I'm doing?

  Thank you!

  Some quick ideas:

  The scroll bars will be a fixed height or width of the right or at the bottom of the indicator. In the mouse to the bottom of the event handler, if the click happens to a set of coordinates that are in a region of scroll bar, you know, do not increment the counter.

  OR

  Maybe you can overlay a transparent image control such that it covers the image but not the scroll bars, and find clicks on this second control.

  Mike...

• When sending an Email containing pictures, I get the Message "one or more of the images could not be sent" in Windows Live Mail.

  When sending an Email containing pictures, I get the Message "one or more of the images could not be transmitted. When I send this message to my address, I see the little red X in place of the image. How can I fix it?

  original title: Live Mail

  Hi donabell,.

  Thanks for posting your question in the Microsoft answers Site Feedback forum. Your question it will be better answered by the experts in the Windows Live Solution Center. Please repost your question here.

• I try to print full photo of the body, but need to fit the image horizontally, not vertically. I turn picture or turn paper into the printer?

  Newbie needs help!

  I try to print the photo of full body, but need to fit the image horizontally, not vertically.  I turn picture or turn paper into the printer?

  What version of Windows are you using?

  You can try to open the picture in paint and adjust the print settings and change the orientation from there.

• In the program Panel, when I click the SPACEBAR (that is, 'Play'), the image does not advance.

  In the program Panel, when I click the SPACEBAR (that is, 'Play'), the image does not advance. When I click on 'Play' again once (that is, 'Stop'), the fixed image confirms that we went. Please, what should I do so that when I click the SPACEBAR (that is, 'Play'), the image does indeed move forward? Thank you!

  You send messages in the forum Business Catalyst, you should put this in the forums Adobe Premiere http://forums.adobe.com/community/premiere

• Fluidity in the mode of the image is not visible in the magnification of 100% and above.

  Fluidity in the mode of the image is not visible in the magnification of 100% and above.
  It is perfect between 25% and 66%. If I disable hardware acceleration, it works but slow. Does not work with the PSD, jpeg, 8 or 16-bit. I have reset the PS. He had worked in the morning and stopped work hours despite nothing happened: I have no install or remove any software. My PS is clean, I do not use any add-on or 3rd party filter.

  
  All tips are appreciated.

  Thank you
  Gabor

  2009 end iMac i7 16 GB of ram, ATI Radeon HD 4850, OSX 10.8.3

  https://www.dropbox.com/sh/zy5gqaj0nrpr2yz/ZxgT4DBKQx

  A Mac video card with 512 MB of vram is marginal. A 256 MB card enable GPU mode to liquefy to work at all, even on the small images. The smaller image work about only works in CPU mode, make a smaller selection just the part of the image you want to distort and then start fluidity in CPU mode using the down option. It will be slow but should work. Get a stronger video card (more vram) would be the best solution.

• Why is code to get the center of the image does not?

  Hey there. I'm trying to set up the center of the imags that load so that I can put them in the center of the stage. I do this each image is a different size.

  Here is the code that I learned to work before, but its doesn't now and I've been searching for what I've done wrong with no luck. : (

  Would watch you over and maybe you'll see what I'm doing wrong?

  public function placePicture(e:Event = null):void {
       rawImage = imageData.image[imgNum].imageURL;
       lastImageIndex = imageData.*.length() - 1;
                      
       imageLoader = new Loader;
       imageHolder = new Sprite;
       imageLoader.load(new URLRequest(rawImage));
                                
       imageLoader.x -= imageLoader.width/2; //this should set the image to the center no?
       imageLoader.y -= imageLoader.height/2;
       imageHolder.x = 640; //this is the center of the stage
       imageHolder.y = 100;
       imageHolder.addChild(imageLoader);
       masterHolder.addChild(imageHolder);     
  }
  

  The result when I publish is the image comes on stage, but the upper left corner goes to 640 instead of the center of the image to 640.

  I tried several variations of this all with the same result:

  imageLoader.x = - 1 * imageLoader.width / 2;

  I tried to use setRegistrationPoint with the following tutorial: http://flashscript.ca/set-registration-as3.php

  and I tried to do all this by inserting the charger in a sprite and then in applying the code to the sprite and then adding only another sprite sprite and put to 640 and inserting is not in another sprite and trying to right set up the existing 640 sprite (I hope that all the senses). And I tried to put width/3 and nothing else happens.

  If you have other ideas or you can see what I am doing wrong I would be really gratefull for some tips! : )

  Thanks for any help!

  Oh, and I'm getting no errors on it.

  width and height of the image are not available until the loading is complete.  That is to say, use a Headphone/Earphone full function.

• The images are not display with html content in browserfield

  Hi friends, I am display local html content in the browserfield. It is are display fine but pictures are not display is also local resources stored in the project. I use jde 5.0. Whats to display pictures.

  After so much, I solved it and the images are displayed correctly. I had the habit now of base64 class and image data are passed to the base64 format.

• Impossible to change the wallpaper, the location of the image does not display images.

  Original title: photo location not display images

  I'm trying to access my pictures folder and select a background for my office. But when I search for the location of the image and select the folder of the screen does not display images, even if the pictures are present in the folder. The screen shows only 'solid colors.
  I moved to the location of my pictures, sounds and video to another folder. Then, the default folders are different.
  In Explorer when I just click on the photos forlder ther is a location tab saying my it's the default folder.
  One last thing.
  If I go to explore and navigate to the folder my pictures, right click on a picture and select 'Set as wallpaper', then it displays the content and the folder.

  Any ideas?
  James

  I got it working again.
  And that's a good reason to not mess with the registry.
  I have used a tweak registry to hide the libraries in the Explorer navigation pane. Once I've restored it Windows seems to have found the files for my photos. I then re - hid libraries and everything seems to work ok.

  James

• My width of the Image is not displayed

  Why I am not able to know the width of the image?

  Error

  "TypeError: Error #1009: cannot access a property or method of a null object reference."
  to Show / displayImage)
  "to Show$ iinit ().

  public void displayImage (imgPath:String, imgWidth:Number, imgHeigt:Number, imgXPos:Number, imgYPos:Number)
  {
  var request: URLRequest = new URLRequest (imgPath);
  var loader: Loader = new Loader();
  Loader.Load (request);
  Loader.x = imgXPos;
  Loader.y = imgYPos;
  
  addChild (loader);
  trace (Loader.Content.Width);
  
  }

  so...

  ReferenceError: Error #1069: property not found on flash.display.LoaderInfo width and there is no default value.
  to MethodInfo - 2)

  function onLoad(eve:Event) {}
  trace (Eve.Target.Width);
  }

  Eve.Target refers to the contentLoaderInfo... you should draw something like, trace (eve.target.loader.width)... and NOT with capital w

  --------------

  TypeError: Error #1009: cannot access a property or method of a null object reference.
  to ShowImg / displayImage)
  to ShowImg$ iinit)

  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, onLoad);
                 
  function onLoad(eve:Event) {}
  trace (Eve.Target.Width);
  }
                 
  addChild (loader);
  trace (Loader.Content.Width);

  ... loader.content - contains an object that was loaded by the load method and probably is still set to null at this point, so you cannot call the width on the subject property...

  -------------

  reorganize everything a little lines, and it should work

  function onLoad(eve:Event) {}
  trace (Eve.Target.Loader.Width);

  addChild (eve.target.loader);
  }