BBM PIN changed after, connect to another device, former could be restored?

Similar Questions

• Smartphones blackBerry BBM PIN change?

  Hello

  I am writing today to ask you about a problem I've been for the last few days to my BBM pin code. About 02:00 on Tuesday 2 October I started having a lot of people add me BBM. I thought that someone their posted on facebook and made a typo, then I ignored for a few hours and just blocked everyone add me. He continued, however, and started to become really exsessive (more than 100 people and climbing) at this time I have added one of them to ask the person if they could say their friends to stop to add me and get the person who published it to count the number of correct PIN. He told me that my PIN was a chain email called the copy and the BBM train and stuck in our conversation, it was an e-mail written in Turkish with hundreds of pins BBM on them. I never posted my BBM pin anywhere online before so this was a pretty big shock to see this. My provider is Rogers so I contacted them just maybe get my changed pin code because it is a very dangerous and very frustrating situation. They said that each pin is individual for the device and so I should get a new phone, but they also gave me an email address that did not work to see if you can do something for me. Is it at all possible to get my changed pin code?

  Thank you for your attention

  Erin

  The PIN is unique to each device and is not editable by the user. The unit must be sent for renovation in order to change the pin code.

  This forum, however, is not including the personal support FLANGE. It is a peer-to-peer support community sponsored by RIM users as help us each other.

  For any assistance of RIM, you go through your carrier.

• change essbase connection to another instance of SSP on a different server

  Hello world

  I'm working on 11.1.2.2 EPM platform and I need to change the connection essbase to Shared Services. I want to connect to another instance on another server. So, I think to start the Configurator on the new server to connect the essbase to the new instance. However, what about the existing configuration? I have to cancel the configuration it? Is there a procedure that I could follow?

  I hope that I was clear... Thank you in advance for each considerations that you might have about my problem.

  Kind regards

  Maurizio

  Uninstall Essbase and must remove it shared services registry.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Zone blackBerry Smartphones changed after connects to pc with the bb Desktop Manager

  Hello. Everyone. My bb torch is still change zone eniwitok-12 in area of Beijing while that connects with the pc using the bb Desktop Manager. How it can be fixed? Anyone know this questions.

  Yes, in the BlackBerry Desktop Software, there is an option to ' day of the date and time of the device ' on connection.

  Disable that.

• I have an asus laptop with built-in bluetooth, but I can't perform simple tasks like connecting with another device like a helmet, for example.

  I have an asus laptop with built-in bluetooth. I hit the bluetooth button at the top near the power button, nothing happens and when I go to bluetooth menu manually, click bluetooth settings NOTHING product! All I want to do is sync my headset with my laptop! I did all the bases to find out the headphones, but my computer can't locate!

  Hello

  Hardware devices not detected or does not work - a Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices
  http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

  How to set up a Bluetooth connection
  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not work as expected
  When you click the item
  http://support.Microsoft.com/kb/960531/en-us

  If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

  BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
  devices around you. For each detected Bluetooth device, it displays the following information:
  The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
  Last detection time and more. BluetoothView can also warn when a new Bluetooth device
  is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREE http://www.nirsoft.net/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
  the standard output. For each Bluetooth device, the following information is displayed: MAC
  Address, name, Major Device Type, minor device Type and possibly the name of the company of
  the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Smartphones blackBerry background image changes after connection to the blackberry Manager

  I am a new owner of blackberry curve 8330, and I'm still trying to get all the options work correctly.  A small problem I have is that my background image changes to the original image, the phone came with once I plug it to the blackberry manager to synchronize.  I guess that there is a setting I'm missing.  Can anyone help?

  I think I solved it... Is your Photo in the background in your "Device" memory or your press card?  If in the support card, once you sync, he returned to the screen of origin for your theme.

  I went in the media, opened the photos, parades in my current photo card and while in the photo, I hit the menu, and he has a line of "move". Click on it and you will see Media Card and below will be the memory of the device. Click on the memory of the device and it will be moved here. Now, click on the photo and set it as the background of your screen.

  Now, when you synchronize, it will NOT be moved.  It worked for me, I would like to know if this is the solution for you.

  Godd luck!

• System hangs after connecting a USB device in Satellite A110

  Hello
  I have a Satellite A110 (psab6c). Whenever I plug an ino device USB my computer it crashes and I have to put it off and then on again and remove the USB device. I looked for the drivers, but I can't find.
  I use Windows XP. Can someone help me? Thank you

  Riledogg

  I'm sure that there is a driver problem. See the manuals. It must be described how to properly use this external device.

• Name alias has been changed after connecting to a disabled mailbox

  Hi all, good day.

  I have a question. A mailbox has been disabled by mistake, so I need to plug. Now problem appearred: the right format of our e-mail address is * address email is removed from the privacy *, but once connected, the e-mail address became * address email is removed from the privacy * .

  How can I connect the box Mailbox disabled with the correct/alias address? Thank you.

  Hello

  Question related to logging in client OneDrive question you provided. As you can connect and is with desktop application. As I recommended earlier we ask that post you your request in the Microsoft Office Forums community for assistance.

  http://community.office365.com/en-us/f/default.aspx

  Thank you and best regards,

• Display object changed after Connect-VIServer format

  I found the custom effects Connect-VIserver the output format of the my objects. For example

  Without to connect-VIServer

  $output=@()
  
  $hosts = @("host1","host2")
  $VMs = @("VM1","VM2")
  
  $obj1 = New-Object psobject
  $obj1 | Add-Member NoteProperty -Name "Host" $hosts[0]
  $obj1 | Add-Member NoteProperty -Name "VM" $VMs[0]
  $obj2 = New-Object psobject
  $obj2 | Add-Member NoteProperty -Name "Host" $hosts[1]
  $obj2 | Add-Member NoteProperty -Name "VM" $VMs[1]
       
  $output = $output + ($obj1, $obj2)
  
  $output
  
  
  
  

  Gives this output:

  

  With Connect-VIServer

  
  

  Connect-VIServer localhost -user $VCuser -password $VCpass
  
  $output=@()
  
  $hosts = @("host1","host2")
  $VMs = @("VM1","VM2")
  
  $obj1 = New-Object psobject
  $obj1 | Add-Member NoteProperty -Name "Host" $hosts[0]
  $obj1 | Add-Member NoteProperty -Name "VM" $VMs[0]
  $obj2 = New-Object psobject
  $obj2 | Add-Member NoteProperty -Name "Host" $hosts[1]
  $obj2 | Add-Member NoteProperty -Name "VM" $VMs[1]
       
  $output = $output + ($obj1, $obj2)
  
  $output
  
  

  Output looks like

  

  I can not find a way to fix this and was hoping someone might have a solution?

  Thank you

  Luke

  The explanantion of what you see to understand how PowerShell handles objects in the output stream.

  We'll find a very good explanation in how PowerShell formatting and output REALLY works.

  In short:

  • Connect-VIServer returns a VMware.VimAutomation.ViCore.Impl.V1.VIServerImpl object
  • There is no registered view (.ps1xml files) for this type of object
  • so out-default leans on the number of properties on the object in the stream 1
  • Connect-VIServer more than 5 properties, so off-Format applies to the Format-List
  • and all the following objects in the output stream will be displayed with Format-List

• Commit said non-changements after saving SQL update in forms

  Hi all
  
  The forms I using oracle 10g R2. In one of my form, I have a control unit on which there are certain elements of text when the user enter data in these elements, then press a button next to these items, which update a table of query update sql database
  
  on the next line after the update query I called commit. procedure, then in the last
  
  If form_success then
  message ("the record being updated');
  on the other
  message ("update failed '");
  end if;
  
  the problem I am facing is first message appears FRM-4040 no change to save and then my message updated record, now my question is how can I avoid message non-changements because it creates confusion. Your response is much appreciated

  974222 wrote:
  Hi all

  The forms I using oracle 10g R2. In one of my form, I have a control unit on which there are certain elements of text when the user enter data in these elements, then press a button next to these items, which update a table of query update sql database

  on the next line after the update query I called commit. procedure, then in the last

  If form_success then
  message ("the record being updated');
  on the other
  message ("update failed '");
  end if;

  the problem I am facing is first message appears FRM-4040 no change to save and then my message updated record, now my question is how can I avoid message non-changements because it creates confusion. Your response is much appreciated

  Then remove the trigger of the PREFORM.

  Add the following code before your VALIDATION; code. smple

  .....
  :SYSTEM.MESSAGE_LEVEL := 5;
  
  commit;
  
  if form_success then
  message ('record updated');
  else
  message ('updated failed');
  end if;
  :SYSTEM.MESSAGE_LEVEL := 0;
  

  I hope this works...

  Correct/good brand to help others to get the right answers.

  Published by: HamidHelal on March 19, 2013 15:44

• Can I change the password for my phone on another device?

  at the touch of one side of my phone does not work, and the part of my access code is on this side, so that I can not go on my phone. Is it possible to change my password on another device if I use my phone during the short period of time before it is resolved?

  No, there is not. (nor should there be, it would be a huge security risk).

• Volume down 5% after you connect the removable device

  Hello
  A few months ago, I noticed something very strange: whenever I connect a removable device as USB flash or external HARD disk drive or even my smartphone, the volume goes down to 5%, but only to the browser & media player. Can I change the sound volume by using the volume mixer but it's annoying to do whenever I have something to connect to my PC.
  I reinstalled the drivers for my sound card & for each device, I usually connect & also I reinstalled the browser (Opera browser) & Winamp without success.
  Also, I had some problems in the past which could be linked to it. After you install SP1, whenever I am connected to windows I was warned that the Audio Service does not work although it was running. (solved this one).
  Another problem was related to the removable USB devices. Apparently, Windows could not assign letters to all my removable devices, even if I manually assigned a letter to a device of some. I does not solve it, but I use USB remove to assign letters and it seams to work fine so far. ( Windows 7 assigns letters of readers to external hard drives & Windows 7 assigns letters of readers to external hard drives )
  Any ideas?

  Nevermind, I think I got it.

  Control Panel-> sounds-> communication tab-> when Windows detects communications activity-> reduce the volume of other sounds of 80% has been verified

  I went to do nothing and so far it sews and work.

  Do not know exactly why hard drives have been detected as of communication devices, but my guess is that this has something to do with the Winamp/WMP library, because I'm always asked by these 2 apps to add the new device to the library, even if there is no file audio/video/photo on it.

• I have a lpatop which this office is routed to. The laptop has an internet connection, but I've blocked upward after taking in another room. I need to know my prefrred on the cell network.

  I have a laptop to this computer.  I lost the internet connection after taking in another room & change a connection network, or something else, accidetally.  I: need to know the name of my prefrred network.

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Data clear BBM BBM Android will change BBM PIN code?

  Dear Experts,

  Currently my BBM on my Lennovo S920 was very slow and I am planning on getting some clear data via the parameter > Apps > BBM > clear data to free up space used (now, it has already reached > 200 MB).

  My question is, by doing this, when I connect using the same ID of BBM once again, the PIN will be changed?

  Thank you

  because I know from Googling, erase BBM Android apps will delete all cats and ask again and reconnect the BBM ID.

  The last time I did this (re-login), my PIN is changed (it is because of the software update).

  So I hesitate to erase data because I am afraid that it will change my new BBM PIN (because of BBM ID necessary reconnection).

  To put it in other words, does BBM ID reconnection will always change the PIN code?

• I'm trying to connect on Apple TV.  It keeps generating a 6-digit verification code, sent to another device.  I need a 4 digit or need to know how to make a space on the verification code entry screen

  I'm trying to connect on Apple TV.  It keeps generating a 6-digit verification code, sent to another device.  I need a 4 digit or need to know how to make a space on the verification code entry screen

  Read this noting the last two paragraphs:

  For Apple ID - Apple Support two-factor authentication

  You can try to add on your suggested such password or disable the service and then connect.