bbmachine detection of linux instead of redhatES

I'll put up a new BBPE 4.5 server and found that some orders were not pointed to the correct location (specifically LYNX = / usr/local/bin/lynx). During investigations on the why, I found bbdef-.sh determines where to LYNX point based on what is on BBOSTYPE. So I looked up what BBOSTYPE was defined in bbdef.sh and found that it was generically 'linux '. Then I watched what determines this and stumbled upon the command "bbmachine" under the installation directory looking for a specific output in the file/etc/issue. My construction company of Redhat ES has a question custom/etc/master specifically removes anything, indicating what OS you connect to (security reasons), thus causing the entire sequence defaults to BBOSTYPE = 'linux '.

My question is, can I just change BBOSTYPE to redhatES or even simply redhat, or should I raise the top bbconfig and find a way to hack bbmachine responding with Redhat?

reinstall using bbconfig and choose 'redhatES' for the OS. I think that's the first question.

Tags: Dell Tech

Similar Questions

  • Tecra A7-117 T2300------hardware compatibility with Linux SuSE or RedHat?

    Hello world

    I'm a linux newbie and I tried installing SuSE Linux 10.0.
    But the graphics of the docking station and for the network adapter card is not recognized.

    The graphics card is ATI Mobility Radeon X 1400 HyperMemory and the ATI driver is available
    on the Web site. I guess that this ATI driver installation can be avoided...

    The network adapter is Gigabit-Ethernet type.

    Note = After browsing Internet, I read that a version of Xandros can work...

    If someone managed by installing just SuSE Linux or RedHat on a laptop Tecra A7-117?
    If successful, tell me what version?
    Do you not think that it will be useful to try the "SuSE Linux 10.1" Live-DVD?

    Thank you in advance.

    Hello

    I use a live Knoppix CD on my Satellite and it works properly.
    Sorry, but I don t know about the compatibility of Suse on the Tecra A7.
    Always is it that it is not very easy to install Linux distributions on laptops, because there is no drivers for Linux.
    Especially the original drivers of manufacturing are needed to use the operating system on laptop computers.
    To my knowledge, Toshiba doesn't supports Linux.

    But I found a few sites Web from Toshiba for Linux:
    Toshiba Europe site: http://newsletter.toshiba-tro.de/main/

    Toshiba US site: http://linux.toshiba-dme.co.jp/linux/index.htm

    Maybe you will find some tips on configuring

    Good luck

  • E8350 is not detect computers Linux or NAS

    I have a problem I want to block Internet my Linux and NAS computers on my network, but when I enter the access policy there only Windows computers. Why? Is there a problem with my config? Thank you very much for the help.

    Try dynamic method using static PCs. can cause the ruoter to detect when you use static IP addresses. Detection is based on the use of Dynmatic IPs.

  • Data loader detects the NUMBER instead of VARCHAR2

    Hello

    In my database, I have a table that stores information about components of vehicles. I created a new process identifier as unique keys, fields of manufacturer and reference data loading.

    (For example: manufacturer 'BOSCH', '0238845' reference)

    When the system is running the data map, it detects the column reference number, delete the first zero character '0238845' -> 238845

    How can I solve this problem?

    Kind regards

    transformation in the data loader to make a character?

    Thank you

    Tony Miller

    Software LuvMuffin

  • Installation of 11 GR 2 (linux.zseries64) on Redhat Linux RHEL5.3 error

    I downloaded 11.2.0.2 software oracle site records or both, data bases

    Linux.zseries64_11gR2_database_1of2.zip
    Linux.zseries64_11gR2_database_2of2.zip

    Now when you try to run the script .runInstaller get the following error. Please notify.

    *. / runInstaller: line 254: /tmp/11gDbSw/database/install/.oui: cannot execute binary file *.

    PLEASE NOTIFY. Below IS THE ADDITIONAL INFORMATION of the operating system,

    #uname - a
    Linux crdodb.qia.local 2.6.18 - 128.el5 #1 SMP Wed Dec 17 11:41:38 UTC 2008 x86_64 x86_64 x86_64 GNU/Linux

    perfect answer. Thank you.
    actually I wanted to 11.2.0.2 version for RHEL so found this wrong SW on zseries.
    Which means that we do not have 11.2.0.2 for RHEL. I found only 11.2.0.1 for RHEL from the following link,

    http://www.Oracle.com/technetwork/database/Enterprise-Edition/downloads/index.html

    Now, I now have to download the correct version for RHEL.

  • Requests deployment architecture Oracle Timesten Geo-redundent

    Hello

    We have 6 sites and each site to connect with the line of lease.

    There are 5 different physical Remote Site, we want to deploy the database to the active / standby timesten on 5 sites
    We want to create READ ONLY CACHE LOCAL GROUP for each 5 Sites which is unique site automatic updating (2 node RAC) Central database
    Data changes always happen on the Central Site.

    Oracle timesten active / standby is LAN on each site, but each site is connected via WAN to the Local Central site where the Oracle RAC database
    and configure the Cache to connect each site for Auto refresh read only Cache and a Local Group on each site.


    OVERVIEW OF THE ARCHITECTURE

    Remote Site location-1 == > (read cache only Local Group) Oracle TT c/o < < = auto-refresh <-|
    ||
    Location of Site remote-2 == > (read cache only Local Group) Oracle TT c/o < < = auto-refresh <-| (CENTRAL LOCATION)
    ||
    Remote Site location-3 == > (read cache only Local Group) Oracle TT c/o < < = auto-refresh <-| (Database RAC 2 knots)
    ||
    Remote Site location-4 == > (read cache only Local Group) Oracle TT c/o < < = auto-refresh <-|
    ||
    Remote Site location-5 == > (read cache only Local Group) Oracle TT c/o < < = auto-refresh <-|

    We pass below Oracle technical document.
    http://www.Oracle.com/technetwork/database/performance/WP-IMDB-cache-130299.PDF
    Please check the Figure 7 == > differentials Autorefresh of Read - Only Cache of local groups

    Please suggest your advice and your suggestion for above deployment architecture

    Concerning
    Hitgon

    Published by: hitgon on 10 July 2012 18:44

    Published by: hitgon on 10 July 2012 18:46

    There are many things that you must understand and keep in mind when implementing a complex system, and it is oexception n. You should start by studying documentation TimesTen. In particular you should familiarize yourself with the information in the Cache User Guide and the Guide of the replication. These contain a lot of very important information regarding the installation/deployment and operation c/o pairs and groups of cache, configuration cache link for CARS etc. You should also read through the troubleshooting guide to familiarize yourself with what things to look if things do not seem to work as expected.

    If you are not already familiar with TimesTen, I would also highly recommend that you take the time to read the rest of the documentation. TimesTen is not Oracle Db and it is very compatible with Oracle in many areas, there are also many significant differences you need to consider when developing applications, management of the etc system, if you are able to take a training course OR on Timesten then I would recommend but if not then read the documentation is a good second best.

    It is "not recommended" operating systems specifically, but 64-bit Linux is definitely a good choice. You might consider Oracle Enterprise Linux instead of Redhat; It has some advantages.

    In each site, the two nodes in the pair of active / standby TimesTen should be on the same local network. I would recommend GigaBit ethernet as a minimum.

    Although it is possible to write your own scripts much easier (and much more robust) handful of deployment, monitoring, failover and recovery of pairs a/s there a lot, if you deploy Oracle Clusterware on each site for automated management of the pairs a/s. It is our strong recommendation and is also recommended.

    From a point of view TimesTen, system clock synchronization is necessary within each site (i.e., the clocks on both nodes in a system have? Pair of S must be closely aligned). However, it may be desirable to have all nodes in all sites have their clocks in line for other reasons.

    You must ensure that the bandwidth and latency of the WAN connections is sufficient for the amount of traffic to refresh you. There is no simple way to estimate/calculate this. you will need to determine empirically.

    These are probably the most important things. As you progress, you can of course ask questions in this forum and use Oracle.

    Chris

  • PS6100 with firmware version 7.0.5 + Oracle Linux 5.10 + multipathd question

    I try to use the multipath regular linux (device-map-multipath) with my PS6100 and it doesn't quite work. It gives me "readsector0 Auditor reports path is down," "pdu (op 0 x 50000370 itt 0x1) rejected.» Code 0 x 4 reason"errors and my iSCSI connections are reset every few seconds. My OS is Oracle Linux 5.10 (fully updated) and my PS6100 is running with the latest firmware version 7.0.5.

    The latest kit from Dell STRUCK for Linux, 1.3.0-2, works fine on this machine, but the reason why I'm putting multipathd is to compare the performance between the two solution. If we look at the other system we have that run the ordinary multipathd, paths of Dell could give us performance. We doubt it, but we want to do the tests and a comparison of its performance stats.

    We have another server which has almost the same configuration (same OS connected to an another PS6100) and multipathd works well on this one. And one of the difference between this system and no work is that the PS6100 is running on firmware 5.2.5 instead of 7.0.5. I'd be willing to downgrade firmware (this unit is not yet in production, and I don't mind losing the data on it) but I'm not find anything on the internet that show how other that of the "call from Dell and it'll do it for you. If the only thing you need to do is a special command in the CLI then why there is no documentation on this subject?

    So I wonder if anyone here runs a firmware equallogic 7.0.5 with the multipathd of linux and a RedHat 5 of operating system (Oracle Linux, Redhat, CentOS, etc.)?

    Hello

    It is documented in the release notes for the firmware 7.0.x.  There is a bug in Multipathd, which is exposed with 7.0.x. firmware.   Replace readsector0 TUR or ARM and restart multipathd.  Protocol errors will stop and Linux MPIO works perfectly.

    Kind regards

  • where can I download old versions of Firefox for linux?

    I'm looking to download Firefox 4, 5 and 6 for linux (various flavors - RedHat, Suse, Ubuntu). I thought that there was a site of archive maintained by Firefox, but it cannot locate more.

    FTP://FTP.Mozilla.org/pub/Firefox/releases/

  • Satellite Z830 - update of the BIOS under Linux?

    Hello

    I recently bought a Satellite z830, which I am very happy.

    Given that requires it my work, I wiped the hard drive and installed Ubuntu linux instead of the default Windows installation.
    Now I want to update the BIOS with the latest version, but unfortunately it is only available as a windows .exe

    Is it possible to upgrade the version of BIOS using only Ubuntu?

    Thank you

    -Chris

    Since the European driver page Toshiba simply provides a Win-based BIOS update version, you'll need an OS running in the window to update the BIOS-based victory. :(

  • Set adapter LabVIEW auto detect programmatically

    Hello

    I can programmatically set the adapter of LabVIEW 2011 RTE inTestStand using this expression:

    RunState.Engine.GetAdapterByKeyName ("G VI Flexible adapter"). AsLabVIEWAdapter.SetServerInfo (LabVIEWServer_RTEServer, "C:\\Program Files (x 86) \\National Run-Time\\2011\\lvrt.dll" ")

    I want to set the adapter to 'Auto Detect VI version' instead. Someone know a solution to this

    Thank you

    BR

    Mogens

    Try this:

    RunState.Engine.GetAdapterByKeyName ("G VI Flexible adapter"). AsLabVIEWAdapter.SetServerInfo (LabVIEWServer_RTEServer, "AutoDetect")

    I used the GetServerInfo method with mine the autodetect value and that's what he returned.

    Hope that helps,

  • Win7 doesn't detect the HARD drive Bay upgrade

    When I took the DVD player (which works fine) and put it HDD, Windows 7 does not detect this disc HARD (it does not appear in 'My Computer' or computer management-> storage) but it is detected in linux (parted magic), in the box to the USB and when I open Intel Rapid Storage it's show here.

    Do you have any idea what past?

    My laptop:

    8470w

    Upgrade Bay is enabled in the bios

    I replaced: 1x4Go-> 2x8GB RAM, 640 GB-> 1 TB HARD drive

    added mSata SSD

    I'm trying to replace the DVD drive for the third HARD drive

    I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/ .

    I hope this helps.

  • Aspire One netbook and Linux

    I have an Aspire One netbook for Christmas and after Windows 7 browsing around, I found that a lot of people prefer Linux over Windows, and it has tempted me to try Linux instead.  I've always been a Windows user, so I would like to try something new for a change.

    I want to know is Linux is compatible with my computer?  The model I have is the D270-1466.  Does anyone have this specific netbook who has installed Linux on it?  My netbook will be mainly used for the internet, music and as a word processor.

    Where this information is needed, my netbook has the N2600 (1.6 GHz, 1 MB L2 cache) Atom with 1 GB of DDR3 memory and a 320 HARD drive.

    Thank you.

    You can install linux on this system, but be forewarned, linux is more complicated to use than windows. If you nevertheless try, the version that I recommend is linux mint 14. This is the latest version of linux mint, it's ubuntu based and more user-friendly. I use it on my acer, I set it up to start the double and windows 7. I do not recommend you dualboot your computer is a little small for that. other questions do not hesitate to pm me.

  • Acer Aspire S7-391-6810 works under Linux (Ubuntu, say)?

    Also, if I install Linux instead of Win8, my warranty will be void?

    Thank you!

    Nice day

    Linux (Ubuntu, Fedora, etc.) will run on S7-391-6810, HOWEVER, the only problem you will encounter is the drivers and applications on your computer that drivers are only available for the Windows platform.

    Regarding the warranty, Acer does not care what you load on the machine, as they cover the software warranty. They cover only the pure component on hardware failure... which means that only produce material defect is covered.

  • How to delete windows and install linux?

    I couldn't use my Windows 7 system more because spyware / adware kept interrupting me, and I couldn't remove it without having to pay $100 to upgrade the antivirus and spyware, so I decided to install Linux instead. How can I delete my system Windows and install Linux Debian?

    Download DBAN (http://www.dban.org/) and won't burn it to a blank CD/DVD using ImgBurn (http://www.imgburn.com/) (in XP/Vista), no additional software required for Windows 7 or well make a USB bootable with Universal USB Installer (http://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/)

    Insert this device and enter the BIOs setup in the setup of the BIOs (F2 on the screen of the Bios Dell, a different key to the non-vallons), disable the card readers THAT DBAN otherwise does not quite. Starting the device (hold F12 for a Dell one for a non-Dell BIOs screen and then select boot from CD/DVD or USB respectively). Follow the instructions on the screen to eliminate completely all the data on your hard drive. Do this before installing Windows. Once it is a complete restart as a guest and then power down. When switching on maintain F2 to enter the BIOs setup, and then select the card reader.

    This will have wiped your hard drives correctly.

    Then install UBUNTU or similar do this by downloading their recent .iso and make a bootable USB drive or DVD and boot from it (F12 on the screen of the BIOs Dell or similar for another Dell) - follow the instructions on the screen and see if you like. http://www.Ubuntu.com/

    You can also reinstall Windows 7 with latest Service Packs, more recent definitions of Microsoft Security Essentials & Microsoft Security Essentials, a decent free firewall like Sphinx Windows 7 Firewall Control and also Malwarebytes' Antimalware. A guide based on Dell, including links to download may be found here: http://en.community.dell.com/support-forums/software-os/w/microsoft_os/1434.aspx

  • VMware tools for Linux

    Hello

    Y at - it a general Vmware tools for all Linux: I mean Redhat suse and Ubuntu are the same?

    Where can I download it

    Thank you

    You can install it via the tools provided with your ESXi installation. Right-click the virtual machine in the inventory and select comments-> installation / upgrade VMware Tools.

    This will mount a CD player in the guest operating system, providing VMware tools. The steps to install on CentOS (i.e. RHEL base):

    root@srv20 [/ TMP] # cd/tmp

    root@srv20 [/ TMP] # mkdir/mnt/cdrom

    root@srv20 [/ TMP] # mount/dev/cdrom/mnt/cdrom

    Mount: block device/dev/sr0 is protected write, read-only installation

    root@srv20 [/ TMP] # cp /mnt/cdrom/VMwareTools-*.tar.gz/tmp

    root@srv20 [/ TMP] # umount-l/mnt/cdrom

    root@srv20 [/ TMP] # tar xfz VMwareTools-version 9.0.0 - 782409.tar.gz

    root@srv20 [/ TMP] # cd vmware-tools-distrib.

    root@srv20 [/ tmp/vmware-tools-distrib] # perl./vmware-install.pl--defaut

    Debian may differ a little in the names, but you get the idea.

Maybe you are looking for

  • iPhone 7 pre-order credit cards not already changed

    IV ' e pre-ordered iPhone 7 more black on September 9, the date of delivery of the iPhone that it is supposed to be seven 20-22 seven but seven today 18, my credit card is still not Chargerd for order, it's strange, because the delivery time is 6-8 d

  • HP DV7 3110TX

    Hello Since this is my first post please let me know if I'm doing something wrong. I'm looking for advice and want to make sure that I don't do anything without wanting to offend. My current HP DV7 is running Windows 7 Home Premium 32-bit with 2 x 2

  • Indicator chart 3D does not

    First off I would like to say that the code works on the other two (dev) PCs; but by operating on my clients PC - when the lance the façade program seems to load correctly except where the 3D graphical indicator is the area still shows everything on

  • 8020002E error code

    Five updates fail to download and install it and displays 8020002E error Code. I am running Vista Home Premium.  Fixer tool does not help. Very recently had the go-over system to improve performance and 13 other recent updates installed without probl

  • Want to download 10 W but not able to do that, during installation, a problem arises and the previous operating system is restored.

    My laptop is preinstalled with Windows 7 Home Basic.  At the free launch Windows 10 I downloaded the same and after 2 months, the hard drive crashed.  The repair shop trying to fix formatting, but could not revive.  This is why I bought a new hard dr