Bcc not found in the email of Lenovo P-70-A
Please tell us if there is a "BCC" field to enter the e-mail address when sending e-mail to Lenovo P-70-A.
Thank you very much!
Yes. Click on the arrow down on the box 'to '. A drop down menu will appear where you can enter Cc and Bcc.
Tags: Lenovo Phones
I have an OFFICEJET 7500 a printer.
This is related to my network without any problem on the printer wireless network page.
Can I use e-print by sending an email to the printer and it prints ok.
However, I can't print on my netwrk House to her. The mistake of the printer is unable to connect to the printer. Also when typing the IP address in a browser, it is not found. The hp network diagnostic tool also can not find.
I tried resetting it, it works, reconnect to the network switch but nothing seems to work.
When I installed first, everything was ok, it was two days ago. Now the only way to print is to send an email - please help.
Follow the steps in the document at the link below. Let me know what you find?
The information contained in this document pertains to HP products that have already been set up and configured for wireless and work wireless for quite awhile. This document contains information on the possible causes of an interruption of the wireless connection, tips to avoid the problem and the General troubleshooting steps to help you re-establish the connection Wireless on your HP product.
I tried to update my iTunes this weekend. Now, I can't open it I get this error: AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library is on a Windows 7 computer. I tried to re - install outside of iTunes and repair. But no luck. Should I uninstall iTune and then re-install? Help.
These errors can usually be fixed by removing the offending dll, then fix the component it is programs and features Control Panel. AVFoundationCF.dll belongs to Apple Application Support and are normally in
- C:\Program Files\Fichiers Files\Apple\Apple Application Support or
- C:\Program Files (x 86) \Common Files\Apple\Apple Application Support
where the name of the Program Files folder may vary depending on the region.
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.
More information area has direct links with the current and recent if you have problems to download, must revert to a previous version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.
You just bought a 13HD Cintiq (no touching) and installed the drivers Wacom on my Macbook Air w / OS X 10.11.4. It works as a second screen, but I can't get the pen to do anything and when I look in the preferences system under the Wacom component I see nothing except a message stating "a supported tablet was not found on the system." I have installed the latest driver and two former previous drivers and restarted several times now. Any help?
That's what I see in the system Pref Pane:
Have you checked the forum Wacom for possible solutions?
fully patched W2000 SP4 - try to install or update flash adobe gives "the procedure point SetDllDirectoryW entry is not found in the dynamic library KERNEL32.dll." said ths for both FF and IE versions of the flash Installer... it just started recently... at least since the beginning of 2012... mcafee or norton stuff has never been near this box... This is (vascular) limited to install or update flash...
NOTE: had to choose ' Other/unknown' for windows option version in these forums, because some spark deletion of the option "Windows 2000":? :(
I'll just post a link to workarounds to the case where someone else wants:
Because Windows 2000 is out of support and has had no updates Microsoft security since July 2010, I'm puzzled why people are so concerned about having a Flash Player update. The exploits are likely to be totally confused.
I get the runtime error after when I try to use the function AutoCorrelate in Labwindws 2012.
Function AutoCorrelate: (return value is-5094 [0xffffec1a]). Function not found in the scan DLL library.
I have included advanlys.h at the top of my function and added the LFP to advanced for my custom libraries of CVI analysis. I am tring to use the sample code I copied and pasted from the online help documentation. I can't locate the corresponding advanlys.dll the advanlys.h wants to make reference.
Example code below:
Double x , rxx ;
int n; n = 256;
Uniform (n, x, 17);
AutoCorrelate (x, n, ALGORITHM_CORCOR_NO_NORMALIZATION, rxx);
Same here, but I noticed that my sharing folder is the same as my old CFS files developed with CVI 8.5.1.
CVI shared Dir = "/ C/Program Files (x 86) /National Instruments/Shared/CVI.
I looked more closely in this folder structure and concluded that:
C:\Program Files (x 86) \National Instruments\Shared\Analysis
published the nianlys.dll of CVI 8.5.1. My new installation of 2012 has made this squash a copy later.
Maybe it's the first of many cases where older versions with new conflict. I regret trying to keep the old version of the CVI on this machine to support the previous facility.
Thank you for leading me in the right direction!
I got the error message 'the expected version of the product was not found on the system' when I was installing Microsoft Office Professional 2003 Enterprise Edition (Microsoft Office Outlook 2003 with updated business contact to update Manager) Service Pack 1. I wonder that someone has a solution to resolve this error message. Your help is greatly appreciated.
If which are not related to the situation, suggest it ask you for help by the experts of the Officeinstallation, modernization, and activating Microsoft Office products Forum.
MowGreen Services update - consumer safety
I have the Compatibility Pack installed so that I can open .docx files of type 2007 etc. Apparently the updates of Windows 'think' I have Office 2007 if updates following KB982331, KB981715 and KB982312 are queued to be installed, but they are unable to install it because I have not Office 2007 is installed.
When I try to install the tool in stand-alone via the following links
http://support.Microsoft.com/kb/981715 and select download package now.
I get an error correctly indicating that "the expected version of the product is not found on the system. So they will never install successfully but Windows Update won't jump that updates are not necessary.
Does anyone know how to remove these updates to install?
Support of Microsoft's solution was to uninstall the Office 2007 Compatibility Pack. I chose to ignore the updates and keep the ability to view Office 2007 extensions.
In addition, contact the support does not count as a solution, especially when the problem is not resolved by the project "fix."
whenever I try to print a document on my coreldraw is will just put "file of valid workspace not found in the specified path.
Thanks for posting your question in the Microsoft community forum!
I understand that you encounter printing problems in CorelDraw. I will try to help you with this.
(1) is the issue limited to only Corel Draw?
I suggest you to restore the default values by pressing the F8 key while the program starts.
Reference: File not found valid environment...
If the problem persists, I suggest you contact the link mentioned below for the best support.
Please post back if you have any questions about Windows. I will be happy to provide you with the additional options that you can use to get the problem resolved.
Original title: Plustek OpticBook 3600 is not installed
Found new hardware wizard runs, but after scanning stops the disc from the manufacturer with the message ' year error occurred during the installation of the device.» The required section was not found in the INF"
PC system is homebuild which, in theory, exceed the minimum requirements of the system of manufacturers. Operating system is Windows XP Pro with Service Pack 3. The scanner is connected to the USB 2.0 card that is not separately powered, but installed in the PCI slot. I suspect that the problem lies in the PC rather than the scanner. but do not know what the problem is. Any help would be appreciated!
You can try the troubleshooting provided in the link below steps to fix the problem.
You receive a "unable to install this hardware" or "an error has occurred during installation" error message when you try to install a PCI device
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
Error message: cannot install hardware. An error occurred during the Installation of the device
I have Windows XP, the border is my home page, when I click on a story, Yahoo page appears, 404 not found, sorry, the page you requested
not found. If I go to Google Chrome, it works perfectly! I do not use Chrome because their title stories are not up-to-date.
Border is powered by Yahoo, try the thread above, see if it will solve your problem.
How can I fix it?
application has failed to start because msa32dl was not found, reinstaling the application may fix the problem
First make sure that your system is clean in:
Download, install, update and scan with these full free malware detection programs:
Malwarebytes (MMFA): http://malwarebytes.org/
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner
http://www.eset.com/us/online-scanner/ eset online scanner
Then answer the following questions:
brand and model of the pc
Operating system and service pack
What application fails to start?
During the installation of Microsoft Service Pack 3, I get the message "The expected Version of the product is not found on the system."
Steps to take before you install Windows XP Service Pack 3
How to troubleshoot an installation fails on Windows XP Service Pack 3
How to obtain the latest Windows XP service pack
Downloads of SP3: -.
Windows XP Service Pack 3 - file to Image CD ISO-9660:
Windows XP Service Pack 3 for developers network installation Package and the professionals (unique facilities for the PC can use the same file)
How do you know if you are running a 32 bit / X 86 or 64-bit computer
Do right click my computer and then click Properties.
If you don't see "x 64 Edition" in the list, then you are running 32-bit Windows XP.
If "x 64 Edition" is listed under system, you are running the 64 bit version of Windows XP.
Original title: ntdll.dll error at boot fruity loops.
get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error when I try to start fruity loops after installing Kies from samsung for the new phone. How can I fix this error? Help, please. Thanks in advance! :)
I suggest you contact support FL. I couldn't find all of the resources for this program.
What is apsGetReady? Do I need? If yes how can I do? If this is not the case, how can I remove the window error message.
Wzcsldr2.exe found entry point
the apsGetReady entry point not found in the library of links dynamic wlanapi.dll
1. When you receive this error message?
2. you did it before the issue of any material changes or software?
3. what service pack and antivirus are installed on your system?
4. What is the brand and model of the router you are using to connect to the Internet/network
5 are you facing problems to connect to the Internet or to the network?
6. are you using any third-party wireless / network in the System Manager software?
Step 1: Boot your system in 'Safe Mode with networking' and check if you get the same error message. Then review the article mentioned below to do so:
A description of the start in Windows XP Mode options:
Step 2: If you receive any error in safe mode, please boot your system to the boot and see if the problem still occurs in this mode. Try now to the KB article to perform the clean boot:
Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.
Method 2: Please see Using D-Link, if you use D link router.
Maybe you are looking for
The status of the battery in the menu bar indicates "no charge". Apple says that it is because the power is strong enough to power the computer but not the battery help. However, I am using OEM rated power 65W 24.5V out, have you checked the voltag
Hello world! Lately, after MS updates, I had a lot of problems with my laptop. It seems that the updates instead of improving my system, they actually make it unstable. Someone has the same problem and do you know why this is happening? After saying
I said that I already have an idea of different construction of Windows live.
Before the installation of Nero 11 my Leadtek Winfast capture card had no problem running under 64 bit Windows... Nero has held a number of Microsoft updates installed with Nero 11. Nero 11 has been removed from the computer. Problems still existed!
Hey guys! I was wondering if I can get a feedback about upgrading my computer. I recently bought a 6823w for a good price and wish to update. Fortunately, I did my homework before this post and would be grateful if someone can check links (all Newegg