BD Playstation Bluetooth remote control does not work with Toshiba BT stack

Similar Questions

• IR remote control does not work with the new imac

  IR remote control does not work with the new iMac. From 24 "2007 machine to last 27"

  Correct, because Apple no longer includes the IR sensor in newer models

• Remote control does not respond with Toshiba 24D3434DB

  I recently bought a smart TV 24D3434D.

  I was incapable of analysis for all channels when I bought because I didn't have an aerial socket in the room in which I used it, but I was able to use the tv feature smart until suddenly the TV displays a screen telling me that no channel was available and no longer responds to the remote control.

  I returned to the store and the tv started to react to the remote control again and they were able to search the channels it. When I House and rekindled it remote control not responding until I tried again the next day after I left it unplugged over night.

  In the morning, I found that the remote was working again until I plugged the tv in an adapter and not directly in the sector where the TV no longer responds to the remote control again.

  Anyone know why this is happening or what I can do to fix this?

  Thank you.

  > In the morning, I found that the remote was working again until I plugged the tv into an adapter and not directly in the sector where the TV no longer responds to the remote control again.

  What adapter do you mean exactly?

  The remote control works correctly if the TV is connected directly to the power grid?

  To be honest, it's the first time I encounter this problem.
  Perhaps some sort of light affect the functionality of the remote control, it is maybe s really a TV or remote hardware problem.

  I guess to see what s twist exactly you should test with a different remote or another TV and same remote control.

• Satellite A200 remote control does not work with Vista Ultimate

  Anyone know what I have to work for my TOSHIBA (Media Center) remote?

  I had Vista Ultimate installed on my Satellite A200 (PSAE6).

  Remote has worked on software pre-installed that carried out with (he was Deutsch).

  I almost tried everything, all the drivers are installed, I searched on the site of Toshiba drivers and nothing.

  Help, please.

  To my knowledge the Enbeded IR V0.0.0.6C was installed in the factory Toshiba Vista image. This looks like an application needed to run this command remotely.

  Unfortunately, the application looks like a part of the image of Toshiba and was published by download

  by the way; A200-xxx unit you have exactly?

• Satellite X 200 - after upgrading Vista remote control does not work

  Hello

  I have upgrated my Vista Home Premium to Vista Ultimate and the remote control does not work. Well upgraded... I bought Vista ultimate and it installed.

  Is there a driver for my remote?

  You may need to install the infrared driver.
  This driver is required to activate the infrared port on your laptop.

  You can find it here in the X 200 section
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Satellite P100 remote control does not work

  Hello

  Guys, I bought a toshiba satellite p100 and the remote with it does not work...

  no idea why? the battery must be fully charged... but when I press the buttons of the led on the remote control does not work or the other...

  Help, please...

  Thank you...

  Post edited by: qazam

  Hi Qazam

  How did you test the remote control?
  What do you mean who does not? Some functions does not work or a complete remote control cannot be used?

  I read the user manual and it seems that the remote will work under Windows mode with WinDVD or Express Media player, and Windows Media Player when the laptop was not started in the Windows operating system.

• My Vaio gesture control does not work with MO Pro 2013 Power Point and 14 Ultra CyberlinkPDVD

  My Vaio gesture control does not work with MO Pro 2013 Power Point and 14 Ultra CyberlinkPDVD

  Original title: control sign Vaio

  Hello

  According to my research, the actions must be enabled for individual applications. Check out the following link and activate the gesture for Power Point and Cyberlink PDVD.

  https://us.en.kb.sony.com/app/answers/detail/a_id/36487/~/how-to-configure-vaio-gesture-control-settings.

  For more help, you can contact Sony support.

  https://community.Sony.com/?XID=M:kb_header:eSupport

  Hope that the information provided is useful. Do not respond if you need more help.

• Qosmio G30 - Media center remote control does not work in windows

  Dear all,

  I have a Qosmio G30-194,
  first I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  I tried a full system recovery DVD restore, but nothing has changed, even, I installed Windows Vista with all its pilots.
  Nothing has changed too, I borrowed a USB IR received for another remote that it worked perfectly with my remote on windows.

  Please advise me what to do, should I send it to the service center, or there is an easier solution.

  Mazen h
  NB:,: my laptop info are:

  PQG32E-01P018AR model number

  Thanks in advance

  Hello

  > first of all, I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  If you had a problem with the VGA chip then the whole motherboard has been replaced.
  Maybe it has something to do with your problem.

  Anyway, as far as I know you don t need any special drivers if you want to use the MCE Remote control. For the use of the remote control with Qosmio player you need to connect a USB infrared.

• remote control will not work with satellite receiver

  DIRECTV running through computer media center but the remote does not work cause of media center remote and tv picture only appears in a small box and doesn't let me go beyond installation. I know that there is a way to remove the media center remote satellite remote to work and give me a larger image. HOW?

  Hi JohnBrewster

   

  1. What is the brand and model of the computer and satellite box material?
  2 are the satellite decoder and a remote compatible with Windows Vista?
  
  You can review the Windows Vista Compatibility Center and check if the hardware satellite you are using is compatible with Windows Vista-

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/

  
  You can also check the support link and check if the information provided allows - below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-sound/Windows-Media-Center/c5405812-f8a9-41e1-A551-046fefe78914

   

  I hope this helps.

• Remote control does not work, and the load does not appear on Apple TV

  Hello

  I just returned from vacation and my remote seems has stopped working.   Naturally, my first assumption was that the charge was simply exhausted.

  Apparently that was the case.   He seems to have just died.

  I did pay for more than two hours and it still does not appear under devices Apple TV.

  My Apple TV 4 works very well because I use the remote control of my phone to navigate through it.

  If I understand correctly what I look at you, it seems that the remote control is same not synchronized or recognized by Apple TV more.

  Any suggestions on how to fix this?

  A reset is complete? Restart... no change.

  Thank you

  Bob

  1. Have you tried pressing the menu and the button for a few seconds while it now an inch or two away from the Apple TV, if successful, you should see a message on the screen saying the remote was paired.
  2. If you have an older remote from a previous model MacBook or Apple TV, you can use to restore the Apple TV, which, in many cases, has been sufficient to reactivate the remote Siri. You must complete all upward to undertake a restoration.
  3. If you have a USB cable - C you can try to restore by connecting it to iTunes on a computer.
  4. If you have tried all of these steps, don't have a distance sooner or a USB - C cable or their use is too inconvenient, return it to the store where purchased for a replacement, or to couple for you.

• Satellite A500 - 14 H - remote control does not work

  I have a Satellite A500 - 14 H with the big remote control, but it doesn't work.
  Can someone help me?
  I installed the remote control manager, but no change. He still does not!

  I assume that you got your laptop with preinstalled operating system.
  Have you tested the feature with the parameters of this plant?

  Is remote controller completely dead or some functions do not work?

• Receiving IR of HP and MC remote control does not work after upgrading Vista to Windows 7.

  I upgraded a laptop HP dv9249us for Win 7 Ultimate (64 bit) and Home Premium (32 bit) respectively of Vista and an HP HDX 18 and found that the small remote controls supplied with the PC HP no longer work the IR receiver to control WMC.  For the moment I tried to find a solution for the dv9249us, as the HDX has also a greater remote specialized for the tv tuner, which is still working, but I found that HP did not provide software Win 7 upgrade for this model.  I tried a thought fix it was to be a known side effect of the upgrade process because he appeared in two different rooms and found a HP IR driver referenced to correct this problem for another model called ENE CIR Receiver Driver (sp41645.exe) and install this on the dv9249us without result.  When you check the Device Manager on the dv9249us I have not found reference to an IR unit either in the areas of Human Interface or Universal Serial Bus controller.  I found a reference IR in the section of the Human Interface of the HD-18 referencing an ENE CIR Receiver.  Ideas that you could provide for a non-professional would be appreciated.

  I can not find a model of dv9249 specifically on the hp site. I found the dv9200
  series. you have a link to your specific model?
   
  in all cases, try to remove the Device Manager devices and if requested if you want
  to remove drivers, select Yes. then make a stop at cold and then turn it on.
  Finally, see
  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/Ene-CIR-receiver-conflict-in-Windows-7/TD-p/161289
   
  link of a person found an alternative driver that solves the problem) on the page
  (See above).
   
  It seems that several HP models affected related issues.
   
  If this does not resolve the problem, suggest that also posting in the forums of HP.
   
   
   
  On Saturday, January 15, 2011 19:12:50 + 0000, shanewc wrote:
   
  > I upgraded a HP HDX 18 and a laptop HP dv9249us for Win 7 Ultimate (64 bit) and Vista Home Premium (32 bit) respectively and have found that the small remote controls supplied with the PC HP do work more the receiver IR to control WMC.  For the moment I tried to find a solution for the dv9249us, as the HDX has also a greater remote specialized for the tv tuner, which is still working, but I found that HP did not provide software Win 7 upgrade for this model.  I tried a thought fix it was to be a known side effect of the upgrade process because he appeared in two different rooms and found a HP IR driver referenced to correct this problem for another model called ENE CIR Receiver Driver (sp41645.exe) and install this on the dv9249us without result.  When you check the Device Manager on the dv9249us I have not found reference to an IR unit either in the areas of Human Interface or Universal Serial Bus controller.  I found a reference IR in humans
  Interface
  > HD-18 section referencing an ENE CIR Receiver.  Ideas that you could provide for a non-professional would be appreciated.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Satellite A200 - 25 X - remote control does not work on Windows 7

  Hello

  I have a Satellite A200 - 25 X (originally performed with Vista) and just installed Windows 7.

  Problem is that now my remote (model No. G83C0008A110) no longer works. So far, I have not found all the drivers for the remote control.

  I hope someone here can help me.

  Thank you

  Hey,.

  Have you ever seen the Toshiba driver download page? You have an older model laptop, so pilots are moved to the archives, but it is possible to download all the drivers:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  * Archive * > Satellite > Satellite a series > Satellite A200

  Check this box!

• HP Envy tilt 23 MCE Remote Control does not work

  Hello

  I just bought a m202eg want to tilt 23 which included a USB DVB - T Tuner (AVerMedia A867) and a model of HP brand remote MCE Rothko (P/N 684258 - L31).

  The works of tuner as expected, but the remote has no effect at all, just blinks twice on each press and nothing else.

  I have to mention that the pilot of transmitter/receiver infrared eHome in installed correctly, Windows HID service is running and I also tried the remote on a NECK from Intel with IR integrated without success.

  In addition, as recommended on the back of the remote control, I tried to sync it with the receiver by keeping 'i' and ' # ' pressed for 5 seconds, 6 cm for the receiver, but instead of getting 2 flashes OK, the distance LED stays on for a few minutes and then blinks 4 times.

  I don't really have any other ideas, and I've already lost 2 days trying to get it to work...

  I thought about it, this remote is NOT IR media center remote RC6, even if she looks identical.

  It also works without the tunner AVerMedia DVB - T USB plugged my inclination, because he is using the USB 2.4 GHz key for mouse and keyboard - this is why he needs synchronization.

  So, this can be marked as resolved, it will be useful someone someday.

• How to check the system configuration of the SX20 if the touch screen and the remote control does not work

  Hello friends, would like to know how can we access/check the system configuration of the SX20 if we not touch and remote control or they are not in working condition.

  I think that we can check this Switch interface, but unfortunately, I don't have access to the local switch right now.

  Hello

  option is to have access to the local switch and run "show cdp neighbors detail."

  or

  Connect the mobile to PC/computer LAN, run tftpd32 with affected DHCP pool. Then you can login to get the config.

  regds,

  Aman