Beats Audio cannot find the boot file (HP Omni 220)

When I try to access the Beats Audio, I get an error message indicating that the boot file is not found.

Product name: HP Omni 220-1020 has

OS: Windows 7 64-bit

Hello

Try to use Recovery Manager to reinstall the driver IDT High Definition Audio (this also re - installs the Beats Audio interface) - details on the use of Recovery Manager to reinstall the software and drivers at the link below.

http://support.HP.com/us-en/document/c01868333

After the re-installation is complete, restart the computer.

Kind regards

DP - K

Tags: HP Desktops

Similar Questions

  • Beats Audio cannot find the boot file?

    So, today, out of the blue, Beats Audio has stopped working.

    I didn't make any changes whatsoever still Beats Audio suddenly stopped working.

    IE error message "cannot find the file .startup!.»

    Is there a solution that does not uninstall the sound drivers? I have bad experiences with uninstall drivers and I don't want to risk losing the audio from my laptop.

    Hello

    Interface audio beats is part of the package IDT audio software, so if there is missing a definition file, you will have to reinstall.

    Try to use Recovery Manager to reinstall your original software from IDT - the procedure to use the Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.

    Recovery Manager - Windows 8.

    Recovery Manager - Windows 7

    When this has completed, restart the laptop.

    If the above is not correct the problem, after return with the following details.

    1. the full model number and your cell phone Nr - see here for a guide to the location of such information.

    2 the full version of the operating system that you use (IE Windows 7 64-bit).

    Kind regards

    DP - K

  • Audio beats cannot find the .startup file

    Whenever I try to use the Panel Audio Beats on my Pavillion DV6-6102AX it comes up with the error "cannot find the .startup file! I use Windows 7 64 bit and I also tried to reinstall the audio driver IDT, but that did not solve my problem.

    Hello

    Try the following.

    Open Windows Control Panel, open programs and feature, do a right click the entry for IDT Audio and choose uninstall.  Once this process is complete, restart the laptop.

    When windows has completely recharged, download (unless you already have this file) and install the latest driver IDT at the link below.

    FTP://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52658.exe

    Yet once, once the installation is complete, reboot the laptop.

    Kind regards

    DP - K

  • Windows 7 backup (the system cannot find the specified file. (0 x 80070002))

    Windows 7 Professional 64 bit
    I'm NOT under a system dual boot, OR trying to save to an external drive.
     
    I get the following error message after you run backup.
    Backup has encountered a problem during backup of the file C:\Windows\System32\config\systemprofile\Audio Interviews Etc. error: (the system cannot find the specified file. (0 x 80070002))
    The Audio Interviews etc folder does NOT exist on my HD.  I know because I deleted it.
    It would seem that the backup uses a master list to determine which files should be saved and where are these files.
    I ran regedit looking for some Audio Interviews and did not get a hit.
    I also ran sfc/scannow and without errors, etc. were found.  "... Windows resource protection did not find any breach of integrity... »
    Where is this list and can remove Audio Interviews Etc. She?
    Create a folder called Audio Interviews etc in the folder systemprofile seems a kludgy way to deal with this issue.
    Suggestions/answers would be appreciated.
    TIA

    Hello

    I see that you have found an error after performing a backup. I'll help you with this problem.

    As you already mentioned that you deleted the file, I would like to display hidden files and folders and check once more to confirm that the file is not present in the computer.

    Make sure the show the hidden files and folders option is turned on. To do this, follow these steps:

    Windows 7:

    1. start Windows Explorer. To do this, click Start, type userinit.exe in the Search box and press ENTER.

    2. click on organize, and then click folder and Search Options.

    3. click on the view tab.

    4. click on the next option to DISPLAY FILES AND FOLDERS HIDDEN - click Apply - OK.

    We can also refer to this article and check if that helps.

    0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7: http://support.microsoft.com/kb/979281?wa=wsignin1.0

    I hope this helps.

  • Impossible to delete the "cannot find the specified file. Be sure to only specify the path and the correct name?

    For sum reason my computer just started to do the following when I try and delete a file or move a file from one place to the other.

    I am the administrator and the file is there.

    Failed to remove "" cannot find the specified file. Be sure to only specify the path name and filre coeerct.

    Help!

    Perry

    Hi KAD Rebar,.

    1. Did you the latest changes on the computer?
    2. When was the last time it was working fine?
    3. Are you having similar problem with all the files you are trying to move or remove it from the computer?
    4. You have security software installed on the computer?

    Method 1

    See the link below and run the Fixit tool available, check if it helps.

    Diagnose and repair Windows files and folders problems automatically

    http://support.Microsoft.com/mats/windows_file_and_folder_diag/

     

    Method 2

    If the previous step fails, then I suggest that you start the computer in safe mode and check if the problem persists.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you put the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

  • Error 2: The system cannot find the specified file

    Failed to start the Windows Audio service on the local computer. Error 2: The system cannot find the specified file.

    Help, please
    Sam

    What version of Windows, including service pack (right click on my computer > properties)

    What past just before the problem arises?

    Click Start > run > services.msc > OK
    Scroll down to "Windows Audio"

    The Windows Audio service must be started and its "Startup type" should be "automatic".  If it is not started, double-click the entry and click on the Start button.  If it is unable to start the service or instead generates an error message, the file for the Audio Service may have become corrupt or deleted (although this file has to be protected by Windows File Protection).

    Search for your system (probably C :) drive
            
    audiosrv. DL (it's only one L)

    Make sure to look in the "system folders" "hidden files and folders," and "subfolders.

    You should find the audiosrv.dll (with two Ls) in C:\Windows\system32.

    If she is not there, it should be in C:\Windows\ServicePackFiles\i386

    If it's not there either, you have a file named audiosrv.dl_ in C:\i386?

  • "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file

    Hey all,.

    I have a user running windows Xp Professional with service pack 3. The user gets the following error message when it connects to the computer every morning. "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file. The only thing that seems to not work is calendar Office Print Wizard. I deleted this file and the problem persists. Also, I have not found anything in the case where the viewer that relates to this error. The only mistake I found was an issue with the .net framework. I removed all the facilities framework and their updates. Restarted the computer and ther error disappeared and was replaced by errors in programs that require this file to work. I reinstalled .net framework 2 and returns the error. I left all the machine off separation executives. I did a repair on the .net framework without change. I'm not quite sure that the .net framework is the problem though. I guess that if just. At this point I don't know where to go from here how to solve this problem. Anyone got ideas?

    Hi tripleb316,

    ·         Did you do changes on the computer before the show?

    Follow these methods.

    Method 1: Follow these steps:

    Step 1: Start the computer in safe mode and check if the problem persists.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

    Method 2: Scan the file system (CFS) auditor to repair corrupted files.

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    http://support.Microsoft.com/kb/310747

  • Receive error message: the system cannot find the specified file. C:\Windows\System32\ < LANG_NAME > \mstsc.exe.MUI when I try to use remote desktop.

    Remote Desktop error

    I use Vista Home Premium.  I used to be able to use the remote desktop connection application, but all of a sudden, it stopped working.  When I try to run it I get this message:
    _________________
    The system cannot find the specified file.

    C:\Windows\System32\\mstsc.exe.MUI
    _________________

    Does anyone have a solution to this problem?  I do not have this file into C:\Windows\System32\en-US\... but perhaps it was corrupted somehow?

    Please help me.  Thanks in advance.

    Hello

    It seems that there are a few system files that have trouble.  One of them being mstsc.exe, I wish you find spyware or infection by the virus first, before you try the next step.  Please see the sticky thread in the security forum.  MVP offers some good advice how to remove these problems.

    http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/fa30853d-719a-4265-9e7b-9287567d31e3

    If everything is clean, we will try a repair installation to replace the problem files and also to ensure that other system files are good.

    The 'repair' installation (upgrade on-site) will not affect your installed programs or data.  Just make sure that you are already connected to your computer when you start the installation.  Do not boot from the DVD.

    If the installation does not start automatically when you insert the DVD, run setup.exe from your DVD player.

    • When the Setup program starts and the install now screen, click install now.
    • Note When you receive the important Get updates for installation message, click go online.
    • Click upgrade when the which type of installation you want? appears

    Please let us know if this solves the problem for you.

    Brent
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • The MCSTRM service failed to start due to the following error: the system cannot find the specified file

    My computer starts rather suddenly gel with many applications.  Today it froze again once I finished a long email and was about to send.  I lost him of course.  My Event Viewer was the topic.  Event 7000, Service Control manager Eventlog.

    What can I do?  I have Vista SP2 64-bit.

    I'll add that the kernel_driver of Type 1 mcstrm following 1 State arrested Win32_exit_code 2 <0X2>Wait_hint Checkpoint 0 x 0 0 x 0

    Please... any help to fix... my computer keeps freezing. and I will need to get a new laptop or an Ipad, if the problem persists.

    Thank you

    Candy C:\Users\David> net helpmsg 2

    The system cannot find the specified file.

    Is that error on this post code, IE something deleted, probably your antivirus or you.

    For problems to explore, which has nothing to do with this post, try this (which covers almost any problem).

    Explorer

    Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

     

    To see if a fix is available

    In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.

    You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.

    If the problem affects Panel press the Windows key + R and type wercon (or type it at a command prompt).

     

    Close the browser and start a command prompt

    • Close Windows Explorer
    • Start - All Programs - Accessories - right on command prompt and choose run as administrator.
    • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
    • Press Ctrl + Alt + Delete then Task Manager.
    • Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.

    Then to restart the Explorer after trying all of the following

    • Press Ctrl + Alt + Delete and choose Task Manager
    • In the Task Manager, click the file menu and then click new task (run) and enter explorer
     

    If you cannot start the Explorer at all

    • Press Ctrl + Alt + Delete and choose Task Manager
    • Under the processes tab, click Show processes from all users to elevate to administrator
    • In the Task Manager, click the file menu and then click new task (run) and type cmd
    • Other things you can try typing

      Explorer
      Explorer c:\
      Explorer/e, c:\
      wercon
      control
      Iexplore
      Rstrui

    If you cannot start a folder window you can use the Browse button in the new task dialog. Don't forget that you must right click and choose Open rather than double-clicking.

     

    Reregister the shell registry entries

    It is important that each order is accepted. If the command fails it means the file is damaged and must be repaired.

    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

    regsvr32 /i shell32
    regsvr32 /i urlmon.dll
    regsvr32 RPCRT4.dll
    regsvr32 PROPSYS.dll
    regsvr32 MSCTF.dll
    regsvr32 cscui.dll
    regsvr32 rsaenh.dll
    regsvr32 timedate.cpl
    regsvr32 ATL DLL
    regsvr32 OLEACC.dll
    regsvr32 actxprxy.dll
    regsvr32 USERENV.dll
    regsvr32 msshsq.dll
    regsvr32 NaturalLanguage6.dll
    regsvr32 thumbcache.dll
    regsvr32 WINTRUST.dll
    regsvr32 MMDevAPI.DLL
    regsvr32 audioses.dll
    regsvr32 audioeng.dll
    regsvr32 ExplorerFrame.dll


    regsvr32 msi.dll
    regsvr32 FirewallAPI.dll
    regsvr32 netshell.dll
    regsvr32 pnidui.dll
    regsvr32 QUtil.dll
    regsvr32 c:\windows\system32\wpdshserviceobj.dll
    regsvr32 WINHTTP.dll
    regsvr32 C:\windows\system32\qagent.dll
    regsvr32 C:\windows\system32\portabledeviceapi.dll
    regsvr32 wbemprox.dll
    regsvr32 wbemsvc.dll
    regsvr32 fastprox.dll
    regsvr32 imapi2.dll
    regsvr32 wshext.dll
    regsvr32 gameux.dll
    regsvr32 msxml6.dll
    regsvr32 vbscript.dll
    regsvr32 jscript.dll
    regsvr32 wshext.dll
    regsvr32 wshom.ocx
    regsvr32 wshcon.dll
    regsvr32 scrrun.dll

     

    Delete the folder and the settings of the Menu

    This will remove the settings are saved for each file that you visit. Also the order of the start menu and pinned list settings.

    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

    Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f

    Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f

    Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f

    Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StartPage" /f

    Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder" /f

    Delete the thumbnail and icon Caches

    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

    attrib - r s h '% userprofile%\AppData\Local\*.db '.

    attrib - r s h '% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db '.

    del "% userprofile%\AppData\Local\*.db".

    del "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db".

    Disable thumbnails and previews

    Damaged documents and particularly corrupt pictures or videos, can cause Explorer crash all trying to generate a thumbnail or an overview. This miniature and previews active option off.

    If you can start the Explorer, previews is Union on the command - folder and Search Options - framework of tasks use classic Windows foldersbar.

    Thumbnails are organized on the command bar - folder and Search Options - view tab - and check under Advanced settings - always show icons, never thumbnails and uncheck Show icon file in the pictures.

    If you cannot start the Explorer close Explorer as above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000001 f

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000000 f

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000000 f

    Turn around after testing the Explorer.

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000000 f

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000001 f

    Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000001 f

     

    A boot is a way to explore

    It can be caused by a shell extension.

    Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

    The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.

    • Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
    • Close Windows Explorer
    • Start Autoruns by right-clicking and choose run as administrator
    • Click on the menu Options - Filter Options and check hide Microsoft entries and disable include empty locations
    • Go to the Explorer tab and uncheck everything to the left.
    • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
    • Press Ctrl + Alt + Delete and choose Task Manager.  Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
    • Click the file menu and then click new task (run) and enter explorer

    If this can help, reactivate ½ at a time to identify those who. If this does not help, restart AutoRuns and go to the all tab and uncheck everything that it and restart. If this can help, reactivate ½ at a time to identify those who.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see problems explore

    http://support.Microsoft.com/mats/windows_file_and_folder_diag/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    Recycle Bin
     
    If the problem is the trash bin remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.
     
    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
     
    RD C:\$RECYCLE. BIN/s/q
     
    then repeat for each drive to change the drive letter, for example
     
    d:\$recycle Rd. BIN/s/q
     
    e:\$recycle Rd. BIN/s/q
     
     
    If the Office does not start
     
    This will create a new empty by user and common desktop computer. This will allow to test if a file on your desktop to start the Explorer.
     
    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
     
    MD "% userprofile%\DesktopTest".
     
    Add reg "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% USERPROFILE%\DesktopTest" /f
     
    MD "% public%\desktopTest".
     
    Tracking Add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" v "Common Desktop" REG_EXPAND_SZ /d "% Public%\DesktopTest" t f
     
    To restore default after having tested if begins to explore.
     
    Set ExpFix1 = % user
     
    Set ExpFix2 = % profile
     
    reg add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/f
     
    Set ExpFix1 = % Pub
     
    Set ExpFix2 = % lic

     
    reg add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v "Common Desktop" /t REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/f
     
    You will need to disconnect then.
     
     
    New entry missing folder
     
    If the above does not help.
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the NewFolder.reg.
      
  • When you connect on Vista, get message of the system cannot find the specified file

    the above is displayed. whenever I connect. I can do everything works, that's when I hit print, save appears and the file has been converted to a tiff file.  None of the office products will be printed.  I have the office 7 wiuth Vista 32 OS.  I went throgh HP, but there seems to be a problem in office

    * original title - MOM.implementation, Version = 2.0.3182.4658, Culture = neutral, publickeytoken = 90ba9c70f84672e' or one of its depenencies.  The system cannot find the specified file *.

    Hello

    1. Since when are you facing this problem?

    2. don't you make recent changes?

    I suggest you to follow these steps and check if that helps:

    Method 1:
    Start the computer in safe mode and check if the same problem occurs:
    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Method 2:
    Try to perform the clean boot and check if it helps:
    http://support.Microsoft.com/kb/929135

    NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

    It will be useful.

  • BCDedit - the system cannot find the specified file?

    Hello

    When I type the BCDedit command in the prompt with elevated privileges (Administrator), this error pops up: "the boot configuration data store could not be opened. The system cannot find the specified file. "However, if I restart, press F8 and go into recovery options and run the recovery options command line BCDedit command I get the appropriate list of BCDedit.
    How can I fix?

    I made an account just for this post, as I struggled to understand myself that I tried to re - enable Data Execution Prevention.

    Instead of simply type bcdedit, you tell the computer where to look.

    Run cmd.exe as administrator.

    Then type:

    /store c:\Boot\BCD bcdedit

    This will give you a list of options.

    For example, suppose you want to turn on DEP after having stopped it.

    You would type the following:

    bcdedit/store c:\Boot\BCD/set nx AlwaysOn

  • Setup error "the system cannot find the specified file" (hpzprl40.exe)

    Trying to install HP Photosmart c5180 all-in-one using the latest version of the software download at HP and have Windows 7 Asus desktop computer. Receive error install "the system cannot find the specified file" (hpzprl40.exe), and the wizard stops.  Help, please.

    Hi loveisus,

    Try using the brush included in the CD or download. Let me know what you find?

    Of the Original installation CD:

    1. Insert the CD in the drive and then cancel Setup

    2. open my computer and click right then on the CD from the drive and select open

    3 open the Util folder

    4 open the CCC folder

    5. run the uninstall_L4 (exe or Bat)

    6. once the uninstall is complete, restart the computer

    7 run the Accessories\ System Tools Disk Cleanup

    8. download and install the latest version of Adobe flash player

    http://www.Adobe.com/support/flashplayer/downloads.html

    9 download drivers and full software features

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

    10. run the download to reinstall the printer

    If the software has been downloaded and extracted to your system:

    1. type % temp % in the field of race

    2. Locate and open the folder starting with 7z (example: 7zS2356)

    3 open the Util folder

    4 open the CCC folder

    5. run the uninstall_L4 (exe or Bat)

    6. once the uninstall is complete, restart the computer

    7 run the Accessories\ System Tools Disk Cleanup

    8. download and install the latest version of Adobe flash player

    http://www.Adobe.com/support/flashplayer/downloads.html

    9 download drivers and full software features

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

    10. run the download to reinstall the printer

  • Can't backup windows because Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002))

    can not backup windows because: Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002))
    Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002)).

    Maybe it's because I disabled the camera to prevent other people using the computer?

    [Moved from comments]

    Hi Marrcel,

    Thank you for keeping us posted.

    The issue can be due to turning the camera off. I suggest you to activate the camera and try.

    Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

  • Remote Desktop error: the system cannot find the specified file. C:\WINDOWS\system32\ &#60; LANG_NAME &#62; \mstsc.exe.MUI

    Came across an interesting problem this morning. After starting my PC from various applications (OutLook 2002, Management Studio of SQL Server 2008, etc.). I was able to connect to a server by using Remote Desktop (RDP, alias). On trying to connect to a second system, I started getting the following error message:

    The system cannot find the specified file. C:\WINDOWS\system32\\mstsc.exe.MUI

    Will always be connected to the server, I tried to launch a second instance using RDP, but received the same error message.

    I googled the error and found different solutions (the best solution to examine ishttp://social.technet.microsoft.com/Forums/en-US/itproxpsp/thread/164d1e0b-51e6-4201-9dc2-3f4a0ccb14e5), however, none of the solutions seemed to work.

    I tried checking the virus/malware, etc, but nothing was found. I tried to re - load the dll and the exe (s), but still not received the error message.

    The next solution was to try to see what can be changed on my system (new programs, etc.). I noticed there is an update downloaded to my system (C:\Windows\WindowsUpdate.log): AutomaticUpdates content success install successful and Restart required for the following update: update for Windows XP (KB969084)... the update is related to remote desktop.

    I rebooted the system, still not received the RDP error messages. Is I did a complete "install updates and shut down ', and then restarted my system that started working again.

    For the record, here is some information on my system:

    XP Professional: Version 5.1 (Build 2600.xpsp_sp3_gdr.091208 - 2036: Service Pack 3)

    c:\windows\system32\mstsc.exe: 6.1.7600.16385

    I wanted to just post this in case someone else runs into a similar problem...

    Thank you!

    Argue for your limitations and of course they will belong. -Richard Bach, Illusions

    I have a machine with the same problem

    XP Professional: Version 5.1 (Build 2600

    I installed the update for Windows XP (KB969084).

    It does not, but a reboot is required because the system is running on the old dll

    MSTSC.exe works now

    Thanks for the info!

  • Error 2: The system cannot find the specified file. Even after restarting the Printer Spooler service

    I tried all of the suggestions posted and have had no success in restarting my print spooler. Help, please.

    Original title: I tried to restart the print spooler as directed, and he returned the error 2: the system cannot find the specified file. He does that and is it fixable?

    @Winston Microsoft M committed Support Engineer 'expert '.

    I can see your response that you did take the time to reproduce the problem and then try your own ideas to check if the problem persists.

    Here is what I suggest to you, so you can learn how XP actually works:

    Start in the XP Recovery Console or Safe Mode, so Windows File Protection does not run.

    Rename your file c:\windows\system32\spoolsv.exe you can remember (such as spoolsv.bak).  Now, the file is "absent".

    Restart normally.

    Then try to start the Print Spooler Service and you will see the error.

    So why don't you follow your own advice and run SFC and troubleshooting automated (as you suggested) and check if the problem persists.

    Please report your results.

    When you see that it does help and that SFC does not replace the missing or damaged file (in the system32 folder) and that the automated troubleshooter does not help, will sing it a different song (we hope).

    Don't forget to rename your spoolsv.bak to spoolsv.exe when you're done messing around autour.

Maybe you are looking for

  • Reduce consumption of battery motion and automatic brightness

    Hi, I would like to know some things. First: activation reduce motion put on iPhone save the battery life since perspective wallpapers are being turned off when the low power Mode is on? Second: Automatic Rotation of the brightness to the wide and ho

  • I want to be - not in the folder unsorted bookmarks?

    When I click on the bookmarks I'd rather see a list (that I'm used to with firefox)With the new computer they all in the unsorted folder.Would rather that they do not go in any folderTHX

  • HP Pavilion dv5: find software

    After replacing the failed HARD drive, Device Manager indicates a problem with the search and installation of 'Controller of Bus SM driver software' and 'Data Acquisition and Signal Processing controller PCI'. You guys can help me solve these problem

  • Laserjet1020: Driver download for stand-alone desktop PC

    How can I download the driver for this printer Laserjet 1020 (Lost the original disk) I want to connect the printer to a computer Dell windows 10 Download on memory stick?

  • Sony Vaio SVS15127PXB software pre-installed

    I bought a Sony Vaio SVS15127PXB last Saturday, and she didn't have some software such as ACID, its fog, Movie Platinum... If this model come with these software, how can I get these?