Similar Questions

• Beats by Dr. Dre Solo2 On-Ear Headphones

  Are the Beats by Dr. Dre Solo2 On-Ear Headphones (Deluxe Edition) wireless?

  There is no description that the Solo2 on the ears are wireless, so they seem to be wired.

• I can't connect my headphone wireless beats studio

  I have an iMac and I installed windows boot camp! I bought Beats of Dr.Dre studio wireless! the headset works on bluetooth very well with the phone nokia and OS X and the iPad! but it connects to windows, I tried to search a lot for the driveres it won't work and I searched here and they suggested something broadcom and it did not work as well :/

  Hello

  Thanks for posting your concern here in the Microsoft Community. I want to help you.

  First of all, thank you for the effort you have put in to solve the problem.

  The description of the question, I understand that Windows is unable to detect the drivers wireless for wireless headphones.

  I would like to know if this problem is limited only to the wireless headset or other device is affected too.

  Please perform the methods suggested below and see if it can help solve the problem.

  Method 1

  Try to use the corner hardware store and see if it helps to solve the problem.

  Link: https://support.microsoft.com/en-us/mats/hardware_device_problems

  (Note: applies to Windows 10)

  Method 2

  Try to download the drivers for the device wireless using the update of the Windows device driver.

  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  Otherwise, if the update is unable to register and download the required drivers for the device, you can also use the code provider to the Bluetooth device and search the Microsoft Update Catalog.

  FAQ: http://catalog.update.microsoft.com/v7/site/FaqGeneric.aspx

  Uninstalled and unknown devices appear under other. The device will have a yellow to this topic alert symbol. The properties of the device indicates that no driver was found.

  Under the properties of the device, select the Details tab and scroll down to the hardware ID. Each hardware ID includes very useful information. The VID value provides the ID of the seller , and the PID value provides the product ID of the device. Make a note of the value of PID . Enter the PID value in the search field of the Update Catalog. In case you have several types of devices listed, refine your search by adding also to the VID value.

  Once downloaded and extracted, you can point this driver Device Manager to install the hardware.

  In addition, you can also check out the link for more information below.

  Link: http://windows.microsoft.com/en-in/windows-8/why-isn ' t-windows-conclusion-device

  (Note: applies to Windows 10)

  Please keep us informed on the status of the issue. If it persists, we would be happy to help you.

  Thank you.

• Headphones Wireless Sony TMR-RF970R

  I bought these headphones to watch TV late at night early in the morning. The headphones cost me a little more than $100. These headphones are not worth $ 15, I looked online for more help, the product is not listed, got Sony Chat online and could not find this model online. The hiss and static is so bad, it gets a little harder can't hear the current television. Now I have to go looking for a way to get to this wrong righted. I'll post on all relevant websites on the shit that is put out there.

  Hello and welcome to the Discussion Forum for the users.

  Furnish your model of headphones wireless Sony MDR-RF970R not RF970R-TMR is however, the issue you experience with your wireless headset is known as radio frequency interference. Try these steps to improve it.

  1. move closer to the transmitter or move the transmitter.
  2. change of frequency radio with the selector switch CHANNEL switch on the transmitter, then set the same radio frequency with the selector SETTING (or TUNING button) on the headphones.
  3. If the transmitter is connected to the headphone jack, increase the volume of the connected audio/video device.

• Running w / HR monitor AND headphones wireless w / Apple Watch 2 series

  Since obtaining Apple Watch series 2, I've been out running with wireless headphones Powerbeats2 alongside the screen TickR HR, both related to the watch simultaneously via Bluetooth. While this works great, I wonder if I can do even better and lose the style HR chest strap monitor. Has anyone had success with wireless headphones that double as a monitor of human resources (e.g., Bose Soundsport Pulse), and specifies how was the heart rate?

  Hello

  Apple Watch includes a heart rate sensor built-in.

  If you have not already done so, you can try to use this instead of an external monitor. When you use the application of the workout, the heart rate is measured continuously during the training:

  • Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support
  • Work with your Apple Watch - Apple Support

• Headphones Wireless + Bluetooth adapter + TV

  Will be wireless headphones MDR-10RBT + 2-way Bluetooth adapter HWS-BTA2W compatible with the Bravia KDL-40HX800 TV?

  Hello NY_Lone_ranger. Yes, it is possible to use the HWS-BTA2W services on television. It can be connected using a stereo mini-jack cable rca for audio on the TV. Audio system and an audio output to set the value of the TV speakers. Once the MDR-10RBT is associated with the adapter, you can listen to the sound of the TV.

  If my post answered your question, please mark it as "accept as a Solution.

• Bat battery MBA for drain headphones wireless?

  My MBA battery drains a huge amount of energy when I connect my wireless headset using bluetooth connection.  I noticed that the MBA has lost 1% every seven minutes.  I haven't done anything else except play youtube while surfing sites.  Is this normal? If Yes, do you have an idea to improve the battery?

  700 minutes, is more than 11 hours.  Well inside normal specifications of the machine.  http://www.Apple.com/batteries/

• Where can I connect the headphones wireless at the back of the plasma LG tv? Need to Add ' l. wire?

  Helmet model # is MDR-RF985RK 900 mhz.

  Where to connect to the back of the plasma tv?

  Hi Carl84Rossi,

  Detailed instructions as well as the pictorial representation to connect the headphones to the TV are mentioned on the link below:

• Headphones Wireless Bose Soundlink 2 installation for windows 7

  Windows 7 64-bit OS

  laptop Fujitsu lifebook E736

  problem: in devices and printers, adding device. able to detect the bose soundlink 2 window bluetooh wireless earpiece.

  Add the device is finished, but when I right click > service > I can't select operation for listening to music or VoIP calls forward for hands-free

  Hello

  We are here to help.

  It seems that there is a problem connecting to your Bose SoundLink 2 Wireless Bluetooth Headset to your laptop Fujitsu Lifebook E736 via Bluetooth. According to our research, your Bluetooth headset is only compatible with mobile and tablet devices. Only Bose wireless speakers are compatible with laptops. Please check Product Support Bose to confirm if your Bluetooth headset is compatible with laptops.

  Kind regards.

• I am installing Bluetooth headphones (wireless).

  I could pair my headset wireless (Dell BH200).  The Unit presents in the section devices and printers from the control f.  But when I go to the sound section of the control panel of the device does not appear, and I don't know how to add it I can't make them work. I hear any sound through them.

  Srinivas THANK YOU very much for your reply & Widebear for your question,

  I'm looking for a solution to my problem Sharper Image pregnant wireless bluetooth dongle for over two weeks now since I just bought a new laptop with Windows 7.  And SHarper Image went bankrupt so their technical support is absolete.  I was going to install crazy crazy and reinstall bluetooth drivers and searching on the net for the update... right when I found this forum and low and this is all I had to do was the 4 simple steps listed in your post... it just open the sound box and connect them :-)   Thanks again, you don't know what life was like without speakers of good quality for my pleasure!

  Support Microsoft ROCKS!

• Bluetooth driver problem, soundwear sd10 headphone wireless.

  bought a soundwear sd10 bluetooth wireless headset that connects to my pc windows 7, but the error message "the drivers for this device are not installed. (Code 28) ». I tried to update the driver but still get the missing drivers.

  Searching the Web I found several 'update driver programs' tell me my bluetooth driver is out of date (2006) and an option to upgrade to a version of 2009, once I have paid for a subscription. I wouldn't be able to do it for free by microsoft, and why the auto updates I have the latest version?

  The headset works fine with my phone :(

  Dongle Bluetooth should have been delivered with a mini CD containing the necessary drivers.

  Also, the "best" dongles brand should also have the intelligence section of tech support on the web site of the manufacturer.  They would also include a driver download.

• How will I know if I can use wireless headphones on my HP Pavillion DV7 running on Windows 7?

  I have a HP Pavillion DV7 Windows 7 & would like to buy headphones wireless instead of the smaller earbuds that came with it.  How do I know if I can use it as most of the sites such as eBay requires your PC to be Bluetooth compatible so that their specific work wireless headphones.  How will I know if my phone is bluetooth compatible?  I searched what little paperwork came with it, but don't know where else to find this information & don't want to buy headphones which doesn't work on my laptop & end up having to return them.  I am not very savvy PC so I'm sure that somewhere in the software there are some information about it, but I don't know how or where to find it on my laptop.  I could really use the skills of a person to solve this dilemma bit I'll have too simple as it may seem to most of you, the experts there, but for a "newbie" like me, it's all Greek to me!

  Please, can someone help me understand what to do or where to find this information.  Is somewhere in the control panel?  I'm just at a loss about where to find this kind of information on my own laptop & feel like a true dummie here, people!  I just want to be able to listen to stereo to my Netflix movies & other programs I have on my laptop with a nice set of headphones but I need to be sure everything I buy is compatible with my laptop.

  Thanks to someone out there who can help me with what may seem like a trivial problem, but for me it's a mystery!  I need help badly!

  Sam51

  Hello Sam51

  According to the data sheet for your computer it has not built in the Bluetooth adapter. Fortunately, there is another option, there are devices called Bluetooth adapters that fit in one of your USB ports. Newegg sells them at a reasonable pace, but you can also buy them from most electronic stores may be in your area.

  Please answer as soon as possible.

  Thank you

• Lightning to headphone issues

  Hello

  I noticed a strange thing on my iPhone 7. Since I have not immediately Headphones Wireless I'v been using my headphones Beats Tour with the adapter provided with the iPhone. What I noticed is once I have connect my beats to the card and start playing music I can't skip/pause songs. Practically impossible to use the controllers at all on my headphones.  Strange thing is that I unplug the adapter and plug it back and it works! Once I stop the song it goes back to the State previous I mentioned, a mode not functional...

  I don't know if it's a software problem or hardware related or maybe just the dongle Act up but it's quite boring!

  Everyone has experienced the same or similar problem?

  Records,

  Arzensan

  Hi Arzensan

  Other users have reported problems with Apple and headphones from third parties.

  Apple reportedly working on a fix.

  In the meantime, I suggest to let Apple know that you also have problems:

  • https://www.Apple.com/feedback/iPhone.html

  More information (for example):

  Problem with iPhone 7Plus, lightning audio commands, connector and inline

• Bat continues to loss of bluetooth connection Studio headphones

  I just bought a pair of Beats Studio Headphones Wireless. I am very frustrated that the connection bluetooth keeps falling. I'm pairing with an iPhone 6. It seems to drop when I manually change the song on my iPhone - not every time, but often enough. After he drops I turn the headphone market to restore the connection.

  Is this normal? If so, it is totally unacceptable for a $400 product. If she is not normal, are there troubleshooting tips?

  I'm having this same exact problem with a Plus 6 iPhone and iPhone 5.  I'll be in music, and when I move a song to another, the Bluetooth drop connection.  I have to turn off the headset and the re-pair.  Also, I have an iMac and have not had this problem with her, so I think it's something in the phones.

• Apple music shuts down during the passage of the songs with Beats

  Well, then it is obviously a problem with iOS 9.2, because it has not fixed the beta 9.2, and it wasn't a problem with iOS 9.1. Last night, I upgraded my iPad and my iPhone iOS 9.2. I own a pair of Beats Studio Headphones Wireless. Every time I play a piece of music from Apple, and I want songs in the middle of a song, if I don't pause, the song plays for half a second, then shuts down and disconnects from my helmet. I also noticed this problem very rarely in the iOS 9.1, but it was only music app to another app with the sound, not just in changing songs. Please help me because it's very annoying to have to turn off my helmet and again between each song. Also, sometimes it glitches and getting a continuous noise on a song and I have to reboot my device. If there is a patch for that soon it would be much appreciated.

  I had the same problem. I plugged my Wireless Studio Beats and checked my firmware using Updater bat and found out there was a (2.1.8) update. After you have installed and (importantly) not matching and rematching the beats of my iPhone, Apple music was working normally again, and I was getting disconnected when changing tracks more. Hope this works for you also.