Because getting an email that recurs every 5 minutes, we were not able to get the new email, even from block the bad email.
An email was sent to our account from an iPhone; the e-mail contained two photos. For the next two days, that E-mail reproduces itself in our Inbox (with the same time/date) more than two hundred times... like every 8 minutes. I have blocked using the object, and those still in the Inbox disappeared. (We were constantly moving them to the trash). A computer guru suggested I unlock now, and he has not returned. However, because the e-mail arrived Wednesday morning we have not been able to get new emails. They appear on in Yahoo email, but nothing will come by Thunderbird. (Get new emails seems to be "stuck"). Our Norton account has done many tests, and that did not help. Can someone help us get our email back to normal? Moreover, the same email/photos were sent to two other people of the same phone I, and they had no problem at all with him.
Menu help > troubleshooting information.
Please copy to the Clipboard and paste the information into a message here so your settings can be checked.
Connect to your e-mail account using a browser (webmail ;) and delete the e-mail following undownloaded (in case it is corrupted))
Tags: Thunderbird
Similar Questions
-
I'm not able to use the export to ftp in Muse. When I enter my host, the name and the password, I get a long interlude of the Rainbow wheel, and finally, the message that my host ftp can not be found. I checked the name and it is port 21. I can export to HTML and use another ftp client to download (on the same server), but it's tedious and minor changes is painful. Have you come across this and found a solution?
Yes I have - thanks for thinking.
Starting to think that it is a computer / connection problem. I had to move the machines to connect to the Adobe forum. Plu MacBook thin. New macbook dead ends. These seem too coincidental independent.
Susan
-
I have an iphone 6. Whenever someone calls, I'm not able to take the call and cannot see the identification of the appellant as well. However, he gets noticed in the missed calls. Help, please.
It is a problem of carrier - I would like to talk with my carrier
Your signal may be weak or you can be in a dead zone - or there may be interference - those that can cause the call to go directly to voicemail
-
Not able to see the semi colon and comma when sending email
Hello
I am not able to see the semi colon and comma everything by typing the e-mail address to "TO" However in the body of the email, I'm able to see.
Thank you
Rakesh K *.
***********
The comma and semicolon are on the digital keyboard.
Click on the '123' button at the bottom left, and then you will see them.
UPDATE: the above is true then in the text box. Sorry I misread your question and thought that was what you were asking about. The semi-colon and comma are without function in the recipient area.
-
I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd rom
The Vista installation disc is a DVD. Apparently, you don't have a DVD player. You would need to purchase/install a DVD-ROM or DVD - RW to install Vista. Are you sure that your hardware supports Vista before doing this?
http://www.Microsoft.com/Windows/Windows-Vista/get/system-requirements.aspx
Even if a minimum of 1 GB, the requirements in the real world Vista requires a minimum of 2 GB of RAM to run without problem. You will also need Vista drivers for all your hardware.http://www.Microsoft.com/Windows/Windows-Vista/get/Upgrade-Advisor.aspx MS - MVP - Elephant Boy computers - don't panic!
-
MBR is corrupted, not able to repair the MBR and get error code 0 x 490
Original title: MBR is corrupted
MBR is corrupt repair action: repair disk metadata - result: failed - error code = 0 x 490
Hello
According to the description, I understand that you are not able to repair the Master Boot Record (MBR) and getting the error is 0 x 490.
I suggest that you want to run auto repair with installation media and see if it helps you repair system files or not. For the execution of the task, I suggest you to try the steps below and see if it helps.
Method 1: Execution of restarting the Windows recovery environment (WinRE)
To run the repair to start the Windows recovery environment (WinRE), follow these steps:
Insert the Windows installation disc in the disc drive, and then start the computer.
When the message press any key to start from the CD or DVD is displayed, press a key.
If your PC does not automatically detect the media
When the computer reboots, read on screen for instructions that explain how to interrupt normal startup and access the basic input/output system (BIOS) configuration utility. Most PCs use the F2, F10, ESC or del key to start the configuration of the BIOS.
Looking for a tab in the BIOS configuration utility that is labeled boot order, The Options of Bootor Boot. By following the instructions on the screen, use the arrow keys to go to the boot order, and then press ENTER.
Locate the flash USB, DVD or CD player (this could be called removable device) in the startup list. By following the instructions on the screen, use the arrow keys to move the drive to the top so that it appears first in the startup list. Press ENTER. The startup command sequence is now changed to boot from the flash drive, CD, DVD, or USB.
Press F10 to save your changes and exit the BIOS Setup utility. Select Yes in the confirmation window. The PC will restart.
Select a language, a time and a currency, a keyboard or input method, and then click Next.
Click on repair your computer.
In the System Recovery Options dialog box, select the drive of your Windows installation, and then click Next.
In the System Recovery Options dialog box, click on repair your computer.
Click the operating system you want to repair, and then click Next.
In the System Recovery Options dialog box, click Startup Repair.
For more information about System Recovery Options, see What are the system recovery options in Windows?
For more information about the Startup Repair, see Startup Repair: frequently asked questions.
If you are using Windows 7 then the link provided below might help you to download and create installation media.
Download Windows 7 Disk Images (ISO files): https://www.Microsoft.com/en-us/software-download/Windows7?WA=wsignin1.0
Method 2
If the problem persists, try to rebuild the BCD by using the Bootrec.exe tool. To run the Bootrec.exe tool, you must start the recovery Windows (WINRE) environment . To do this, follow these steps:
Place the Windows 7 installation disc in the disc drive, and then start the computer.
Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
Click repair your computer.
Click the operating system you want to repair, and then click Next.
In the System Recovery Options dialog box, click command prompt.
-
Can someone help me please? I bought Photoshop elements 13 and were not able to install it on my computer. I made attempts at veveral to install it and I lose connection every time. Since I was on a package of data plan with at & t, I have buy the data each month. I consume ALL my data. To be a better way. Can someone help me please? I bought Photoshop elements 13 and were not able to install it on my computer. I made attempts at veveral to install it and I lose connection every time. Since I was on a package of data plan with at & t, I have buy the data each month. I consume ALL my data. To be a better way.
I am well aware I could you bought the disc version. I bought the software Officemax in Vicksburg, MS I thought that the disc was included in the box.
-
How can I change the duration of an MP3 file I downloaded? For example, I have a song that 1.5 last minute, but I want to only keep the 21 seconds. How can I culture there?
Your best bet would be looking for writers to mp3/wave. There are a few very good freeware/shareware sound there. I suggest this so that you can choose what format you want to save your file cropped as.
-
Original title: I have Vista with Service Pack 2, but were unable to come down and configure updates since 07/12/11. Need help, thank you.
Do not get the error codes. Just when I reboot, I get the message "updates were not able to configure correctly, returning from the changes".
Hello
You are able to start in safe mode, then you can perform the clean boot in safe mode and then try to boot into normal mode.Put your boot system helps determine if third-party applications or startup items are causing the problem.See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.If you are able to boot to the desktop after you perform a clean boot Windows check updates history of inforamtion on the updates failed.Reference: -
My OS has been updated from Windows 7 to Windows 10 without disabling the Adobe Acrobat 9 installed on the machine. Now I'm not able to activate the reinstalled Adobe Acrobat. When I try to record the serial number, it is not accepted and is considered as invalid. Is it others to activate the serial No. ?
Hello
Please see error: "serial number is not valid for this product". Adobe Creative Suite and serial number incorrect error
Alternatively, you can contact customer service
Hope that helps!
Kind regards
Sheena
-
Am not able to resize the fonts, images, or anything that is related to the use of numbers. How can this be corrected?
Hello
Is this a problem of input in any number?
All applications (such as Notepad) do have the same problem?
Is your Num Lock?
Brian
-
Not able to add the email account
Hello
To configure my hotmail account from POP to IMAP on my MacBook Pro, it was told by the community of Microsoft that I had to remove/delete the account, and then add it again. I did and the innbox disappeared, but when I tried to add the account again, I get the message that the account already exists. I get this message, even if the account is not on the list of available accounts. I hope you can help me to sort this out for me. (FYI: the microsoft community told me I could try to put @outlook.mac at the end of the address instead of @hotmail.com and this has me a bit more, but he said the account already exists in the next step.)
Sincerely,
Benedikte
1. Please make sure that you don't have two accounts with the same email address. What happens if one of them is an iCloud account.
2. If you use iCloud Keychain, open the iCloud pane in system preferences and uncheck the keychain. You will be prompted to delete the keychain local iCloud. Confirm - the data will remain on the servers. Then re-check the box. Follow one of the procedures described in this article to support to implement the iCloud Keychain on an additional device. Test.
If you can't disable iCloud Keychain because the box itself check again, disable it on all your other devices first, and then try again. Before you do, make sure that you can use at least one of the methods given in the related support above, article under the heading "how to configure iCloud Keychain on a new device without another device to approve of?
3. in the menu bar of Mail, you select
▹ Connection Doctor window
In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.
Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.
-
Not able to open the email to Self care
Original title: ssesurf electronic mail does not open
I have account email with ssesurf that my Inbox does not open
Hello(1) what exactly happens when you try to open the e-mail?(2) you get an error message, if so what is the exact\complete error message you get?(3) remember you to make changes to the computer before the question?(4) have been able to open the e-mail of course you care before the question?You can contact Self care for assistance by following the linkHope this information is useful. -
Hello:
I have Mac Acrobat 11.0.6.
Like others who have posted, I'm not able to open a PDF file in Acrobat that I created with Mac Acrobat, as attachments sent and used to be able to open.
Is there a utility to fix or repair?
I get the message "Acrobat cannot open '___.pdf' because it is not a supported file type or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded)."
Thank you!
PS Look back, I asked once before, but without the information that I had created them as PDF files. The problem was not resolved.
The text editor suggests that what you have is completely corrupt. Usually if these PDF files sent by e-mail without binary coding, you have lost the PDF document on the end of the RRs and will not be able to recover. You should still be able to use the original file that you created, unless you deleted it. In this case, you will need to return to the original of the document and create a new PDF. It remains unclear how the PDF you are using has been managed since the creation, but it seems that the incorrect coding has been used or another error in a process of e-mail and the file was lost.
-
I can't update /download new itunes on my computer as it is said that an old version is corrupted. I can't uninstall the old version, because it is corrupt. I'm now stuck and looking for a solution. Can anyone help?
See excellent iTunes from turingtest2 for Windows troubleshooting guide at:
Troubleshooting problems with iTunes for Windows updates
in particular the section on the removal and reinstallation of iTunes and other software components
It explains how to remove each component individually and what to do if a component will not uninstall.
Type Bootrec.exe, and then press ENTER.
See the following link for more information:
How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows
http://support.Microsoft.com/kb/927392
Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.
Maybe you are looking for
-
Why iOs doesn't support Persian language with over 100 million speakers?
It has been years that Apple has completely ignored a language which is the official in 3 countries and spoken by over 100 million people. We all know that political sanctions posed by United estates on the Iran had disappeared and in 2015, there is
-
OfficeJet 4630: Install new printer - ink cartridge problem
I'll put up a new HP Officejet 4630. I installed two cartridges of HP61 that came with the new printer. The menu of the poster printer "ink cartridge problem, the following ink cartridge needs to be replaced" followed by a black circle. How a new car
-
HP 2540: HP 2540 - no communication scan / Scanner busy
Worked fine for centuries, but suddenly... exclamation yellow flashes... after that click on "Scan a document or Photo" in the Print Wizard HP a PopUp says "Scanner communication cannot be established... '. »uninstalled and reinstalled the printer ch
-
Can switch 10, I do refresh of system or factory reset after the update of win10?
I have the Switch 10 with Win8.1 and think to update to Win10, but no can not find information about refresh/factory reset system after the update. I'll be able to factory reset the tablet to Win8.1 or once updated, all refresh/reset options have dis
-
Install Windows 7 on SSD and programs on the HARD drive?
Original title: conner bottomley. Hello I was wondering if you could help me! I recently built my own PC, it has 2 drives (1 SSD and 1 HDD) and I want to have windows 7 (64 bit) installed on the smaller SSD and all other files and programs on the lar