before and after the shows difference in white balance even if the photo is not published

My present Lightroom (white balance) differences between before and after images of the same file, even when the image was published not (the front of the image seems greener). I already checked my import settings and there is no editing during import. The two images, before and after should look exactly the same, but they don t. I have amd using a PC and my files is Nikon Raw or jpeg, it is not serious, the same product no matter the file type.

antesedepois.png

This is probably due to a faulty monitor profile.

Windows 10 is known to install the manufacturer profiles, which are often of poor quality.

Troubleshooting, as well as a temporary fix, try to set the monitor to sRGB profile.

I have this solves the problem, ideally you should calibrate your monitor with a standard material.

Press the Windows key + R, type colorcpland press ENTER.

Add the sRGB profile, and then set as default profile. See screenshot (from Windows 7) below.

Tags: Photoshop Lightroom

Similar Questions

  • By comparing the photos before and after the adjustments

    Hi all

    I'm about to go through the Canon DPP to Camera RAW software.

    In DPP, it is possible to divide opinion in order to compare the same RAW image with different adjustments. This possibility is very valuable to me.

    Is it possible to split view in Camera RAW?

    If this is not the case, how can you compare the original image with that you get after doing the settings?

    Thank you for your replies,

    Cédric

    Each adjustment Panel in ACR has of a preview box you can check or uncheck to display the settings in this Panel.

    Alternatively, you can simply switch the 'p' button to see the difference in your image before and after the adjustments. But in both cases, this before/after comparison is limired for adjustments that are made only in the Panel in which you are currently working.

    However, if you switch to the Panel settings predefined and toggle the 'p' button, this will show you the difference between the image that it was initially opened in ACR and after all adjustments in all panels.

  • Before and after the Question

    Why do the front and after the opinion does not seem to take into account the cropping?  The only way I can see my version of before harvest is to reset the input image.  I would like the picture to the file of origin before and the after version after all edits including crops.  Any suggestions on how to do it?

    I am happy that before / after does not remove the culture so that I can zoom/drag on the same area and have the same point of view.  I proposed that there is a switch on the crop tool similar to the rest of the panels and tools that allows you to turn in culture on and outside.  It seems to be the only one who did not.  This is particularly useful when you perform tasks when the spot source out of the cropped area and you want to adjust.  Its probably a design decision because I think many of the cursor are fit and are biased to the data in the cropped part of the picture.

  • I'd like to produce consistent spacing before and after the section headings in the table of contents

    Hello

    I am trying to create a style for the entries of table of contents for the titles of the books section. I would have a little more vertical space between these securities and two other section titles or sub-section titles, like so:

    Section 1

    Paragraph 1 a

    Paragraph 1(b)

    Section 2

    Section 3

    and so on. To do this, I can easily add a space before and after the space for the section title style. The problem comes when there are two titles with no intermediaries paragraphs, such as 2 and 3 in the example above. Then, the space between these titles is double. If I set is a nonzero value space before or after the space, but not both, then the titles won't be correctly spaced in areas where it has paragraphs either below or above a section title. Does anyone know how to get a uniform spacing?

    Thanks in advance for any advice!

    Make a third style for the case where there are two titles of section together.

  • Can we call a method before and after the operations of export in ADF 11 g

    Hello
    My problem is that I have to run a method before and after the export operation. Is this posible in ADF 11 g

    Kind regards
    Felix

    Hello

    in response to a post of similatr of yours, I said

    1 drop af:exportCollectionActionListener on a command button
    2. set the control knob to display = false
    3. in your Java code, call

    ActionEvent ae = new ActionEvent (button);
    AE.queue ();

    Everything you put in front

    ActionEvent ae = new ActionEvent (button);
    AE.queue ();

    will be like a before trigger fires, everything that follows as a trigger of post

    Frank

  • How to prune a white space before and after the bookmarks?

    Hello

    I hope that someone can help me with some JavaScript to remove the spaces before and after my favorites. I know I have to use regular expressions which I think would be ^ [\t]+| [\t]+$ and I also found a code on the internet but it is related to not favorite channels.] How would change this code work for bookmarks? Thank you.

    // Trim
    function trim(stringToTrim){
    return stringToTrim.replace(/^\s+|\s+$/g,””);
    }
    

    First of all, for this code to work, you must use standard double quotes, not the ones you currently have it.

    For use on a bookmark, you can do something like this:

    var bkm = this.bookmarkRoot.children[0];
    bkm.name = trim(bkm.name);
    
  • Before and after the problem - Module Development - Windows 7, 64-bit - Lightroom CC v. 2015.5 - camera raw 9.5

    I use Windows 7 64-bit, Lightroom CC 2015.5 Camera Raw 9.5 and the module development on a feature photo ' before and after ' does not work.

    He shows me the image changed, but not the original (I don't know exactly what another image "edited", it shows me).

    In the screen shot, you can see the pictures "before and after" and the one original overxposed.

    I hope I am clear enough.

    Any suggestion?

    before after.jpgoriginal.jpg

    Thank you :-)

    Click with the RIGHT button ON the import step in HISTORY (do click NOT just what this will change your photo AFTER) and select "copy history step settings to before.

    "

  • Before and after the split-screen view

    Its possible for itself before and after without split-screen? Just pass before and after.

    Not to be confused with the key slash?

  • GREP: How is it possible to place a (for example) "*" before and after the text in bold with GREP?

    Hello.

    I have a string of text as such:

    I want to use GREP to insert a "*" (asterisk) before and after each "BOLD" part. I can do it with GREP?

    (if the asterisk is a problem, I can use a different character)

    Any help would be appreciated.

    Hi Schmaltzkopf,

    Try this:

    Have fun

  • OIM11g: Event Notification, before and after the data elements

    Hello

    I have several notification events currently working properly. I would, however, create a new event notification containing the front and after the a modified attribute value.

    For example: If the user's e-mail address changes, the notification should be similar to:

    It is a notification that your email address has been updated correctly in the system. Old value: [email protected] new value: [email protected].

    Notifications appear to not be pulled as handlers process events, process tasks and scheduled tasks, is it possible to have both the front and after the data sets available for notification of each of these tasks?

    Thank you.

    If it's on a field of the user object, you can check if the attribute you are looking at is contained in the orchestration.getParameters (). If it is found, you can remove the old value out of the following:

    HashMap eventDataHashMap = orchestration.getInterEventData ();
    Identity currentUserState = eventDataHashMap.get ("CURRENT_USER") (identity);

    Then you can generate the notification by email/but you want to.

    -Kevin

  • El Capitan sign of a sudden in the last days (before and after the upgrade to 10.11.4 too)

    Hello

    El Capitan signed all of a sudden and then requires the password, it occurs usually once a day. This problem started last weekend before spent 10.11.4 and remained after the upgrade).

    I noticed that this happens usually when I play videos with VLC's .flv and the system is unable to show that the video itself only plays the sound, and after a few minutes that she signed all of a sudden. (I have a MacBook Pro (15-inch, mid-2015, retina, 2.5 GHz Intel Core i7))

    You have noticed the same problem?

    I'm looking forward to your kind help, thanks in advance!

    These must be run as administrator. If you have only one user account, you are the administrator.

    Please launch the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    Step 1

    For this step, the title of the Console window should be all Messages. If it isn't, select

    SYSTEM LOG QUERIES ▹ all Messages

    in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu at the top of the screen bar.

    In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process (WindowServer or loginwindow).

    Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

    The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

    Please don't dump blindly thousands of lines in the journal in this discussion.

    Please do not post screenshots of log messages - text poster.

    Some private information, such as your name, may appear in the log. Anonymize before posting.

    Step 2

    In the Console window, clear the search box, and then select

    DIAGNOSIS AND diagnostic USE information reports ▹ System

    (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

    I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

    If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

    In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

    Please do not post other types of diagnostic report - they are very long and rarely useful.

    When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • Save the data before and after the occurrence of a Trigger Condition.

    Hello

    I am worrking on an application that acquires data from 64 channels and performs many analyses.

    Necessary to implement something is recording the data in the event of alarm condition.

    I've implemented datalogging in many previous applications, but this one is difficult.

    I need to save data for a few seconds before and a few seconds after the alarm has occurred in a single file.

    I thought constantly write data to a file PDM and at the same time deleting the old data, until the alarm trigger occurs.

    but I was not able to do, since I have no blocks to remove data from a PDM file.

    I'm looking for the ideal approach to this recording.

    Any help will be appreciated.

    What I have to do this in the past, use of a queue with loss as a circular buffer.  When you get the relaxation, dump you the data in the queue to your file and then save however many data you want after the outbreak.

    For the purposes of the memory allocation, do not use the queue to rinse.  Use rather a Dequeue element inside a conditional FOR loop with a 0 timeout (reading the queue stops when you have a timeout or you read X samples).

  • Temporary black screen before and after the connection

    I have a Dell Studio XPS running on Windows 7 Home Premium. Recently, I rebooted it after he was infected by malicious software, but now I'm having problems with a black screen that appears. After the windows logo appears, there is a black screen that shows about 20 to 40 seconds. My cursor is visible, I can move it around the screen, and at times, the waiting/loading wheel blue appears. I can connect then wait 40 seconds and my computer seems fine other than that. (Although it seems to take a little longer than expected to load my desktop however). As I mentioned, it started again just so there is no main programs installed that may take a while to load. I used the mode without failure to start my computer and the black screen seems to appear there as well.

    Any help would be greatly appreciated, thank you.

    Hello

    I suggest you to disconnect all external devices and check if that helps.

    Step 1:

    I will suggest you to do material clean boot and check to see if you encounter the same problem.

    a. right-click on computer-> Manage

    b. Hardware tab Device Manager->

    c. right click the sound card, video card and NIC, one by one, and then click on turn off

    d. restart the computer.  If the problem is resolved, you can then enable the devices one by one to find the exact mechanism causing the problem

    Step 2:

    After you find the device that is causing the problem you can solve by installing the latest driver or replacement of the unit.

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    I hope this helps.

  • Error and warning before and after the POST - Satellite M40X 129

    Hello

    I use a Satellite M40X-129, bought in 2005.
    After you have reinstalled Windows and all the necessary drivers (after more than 3 years, which was the longest time I used a windows ;-)) installation this afternoon, I meet the following situation when starting):

    (... check and all the stuff of ram...)
    Updated System Configuration data
    ERROR
    0271: check date and time
    WARNING
    0251: System CMOS checksum bad - default configuration used
    Press to resume, installation

    When I press F1 to resume, windows starts very well as I'm used to it.
    I can also access the configuration and need to update the time setting.

    Two scenarios:
    (a) the startup, shutdown, reboot: error message happen
    (b) setting the time, out of the bios with save the configuration, boot, very well until the stop/restart is required

    I tried to download the update of the bios to v1.60, but the configuration tool told me that this version is already in use and it will not progress.

    What I wondered: why is it happening? I don't think that the battery power is low, which was suggested to others in other threads, because it happened just after I installed the chipset/utils and other drivers from the toshiba download page.

    What can I do?

    -Bios update? -> Where can I find a new version? A tool (which I downloaded from a site linked to Phoenix Technologies) told me, there is an update for my Bios, but he wants me to join a subscription $29.99 / year

    -Swap CMOS battery? -> how remove m40x-129, tutorials? Don't want no f * ck it upwards...

    any other advice?

    Thanks for your help.
    Best regards

    Hello

    I think that the CMOS battery may be empty and therefore both a given in the BIOS is always changing the default value.

    Usually, you should be able to recharge this battery CMOS very easily.
    The user manual describes how to load this. Take a look at your manual

    As I m not wrong not the laptop must be ON and running and must be connected to the mains for more than 20hours.
    Then, the notebooks BIOS battery needs to be recharged again.

    Check it out!

    Good bye

  • Allocation of partition before and after the failover and recovery

    Hello

    I could probably write a test for my question but I thought it would be quicker to ask here first :-)

    Say I have a cluster with 126 storage nodes and the scores of 1891 - so each node has about 65 partitions

    If I lose a partition storage node backup 65 distributed on other members will become primary partitions and some new backups will be created on other nodes. At this point there will also be others dragging walls between the remaining nodes in addition to the creation of backup?

    If I now restore the lost node, it will be allocated a few partitions. These will be the same scores he had originally or is it a random set of partitions, so we get a new round of brewing of the partition? I suspect the answer is that it not necessarily answer scores, he had originally.

    The reason that I ask is that we have a system which, due to certain triggers with some fireworks and association key card support we have two caches on the same node that contain a reference to the same binary value (mapped to other keys). This means that the cache actually takes less space that the size of the units of the two caches beause they both the same reference value. On the other hand, backup partitions will have two copies of the value, and will decide on the amount expected memory.

    -Failover backups become primary and create us backups more if suddenly the primary now uses more memory than the original primary (i.e. it will use the size of the units said it does) so for us a loss of node can result in a larger than normal jump in the use of memory on the remaining nodes, because we have now four copies of the value instead of three.

    If we now have to recover the failed node, there will be some shuffling more partitions. Now, if the node recovered back his original were leaving they would take space ore that they have done it before and the rest of the cluster would be tantamount to the use of memory it had before. If the recovered node gets allocated to the different partitions and then the recovered node will use more memory and other members who now have primary partitions from the failed node will use more space.

    Hopefull everyone can follow that. Basically, I think that, if we lose a node, we will see a bigger jump in memory would be a normal cluster and on the recovery of the node we will always use more memory than we were before because the recovered node did not return the partitions available.

    See you soon,.
    JK

    Jonathan,

    Yes, all your assumptions are fundamentally good (I'm not surprised that you did...). There is no guarantee that partitions move back to the original node if a node comes back again.

    The only thing I could suggest is to "remake" the "artifice of support card' that the partition is transferred or promoted. In the earphone of backingmap you will be able to determine that a new entry is inserted because of the movement of the partition and use it as the signal to make converge the support the cards on a single binary value. You may still temporarily more memory you want, but you would correct as partition movement happens.

    / Christer

Maybe you are looking for