BEFSR41 V 4.3 disconnection problems

All THE firmware / drivers / etc are completely up to date.

I have the router connected to a modem DSL Motorola 2210-02 (1002 firmware) in bridged Ethernet mode. The router is connected to my computer running Windows XP Professional x 64 SP2 and computer from my wife who runs Windows Vista Ultimate (32 bit). We have no problem with internet browsing via Firefox (and IE) and using most of the other internet software dependent if necessary (the P2P clients, instant messaging, etc.).

Play us World of Warcraft and usually have no problems. Whenever we are in large groups (known as raids), we tend to have disconnect issues. The issue is not that we are disconnected from the servers of World of Warcraft, we are disconnected from the Internet completely. We use a Ventrilo for voice chat and it is disconnected at the same time. However, it is tyipcally only a "hiccup" that we are able to reconnect immediately.

This happens if only one of us plays. Blizzard has been unable to help me find the problem, so I've resorted to posting here.

I had this EXACT problem using the same router model (but the 4.0 V) two years ago and had found a solution in the configuration of routers. I don't remember what I did over the years, but because of this I know that the problem is somewhere in the configuration and not in the firmware / drivers / Server editions / incompatabilities / etc.

Any idea is appreciated.

Thank you

~ Darxide

I put it to Keep Alive 180 second renew instead of Connect on Demand and it seems to have cleared up.

Tags: Linksys Routers

Similar Questions

  • WRT54G disconnect problem

    I've been a loyal user of Linksys (CISCO) since the purchase of my 1 Access Point wireless router and 4-port Switch (BEFW1154 v2) in 08/2002. I upgraded to a Linksys Wireless - G Broadband Router (WRT54G v8.00.2) 11/2007. My home wireless network supports; IBM Thinkpad (Windows XP) and Lenovo Ideapad (Windows VISTA Home Premium). A month ago I started having disconnect problems with the WRT54G. The two laptops have been disconnect it. At first I disconnected the supply WRT54G for about 1 minute then plugged in. This has not solved the problem of disconnection. I then tried to unplug the cable modem and power WRT54G. Wait about 1 minute and then reconnect the cable modem, allowing it to reset and synchronization. Then I plugged the WRT54G. This temporarily solved the problem for a few minutes but the disconnection problem returned. I have reset the WRT54G Setup factory default and reconfigured it to my home network. The disconnection problem was not solved by taking this action. I contacted Cablevision that provides my broadband Internet access. They could not identify a root cause of the problem of disconnection. To determine whether the root cause was another thing that the WRT54G, I reinstalled the BEFW1154. I did have a problem of disconnection from taking this action leading me to believe that the WRT54G is bad. I would appreciate any suggestion that could solve the problem of disconnection with the exception of a suggestion to buy a new router. Thank you

    Good to hear that!

    Please click on 'Accept as Solution' to the post that solved the problem so whenever someone meets the same, they immediately know the answer. Thank you.

  • "you have been disconnected" disconnection problem

    today I tried to connect my Skype account, but I always get disconnected without reason, most of the time he's just after login, a few seconds later, I get disconnected. Sometimes it take a long time before being disconnected.

    Skype has problems right now?

    I changed my password, I have updated to the latest version (Jan.1st, 2016, 7.17.0.106) and no I don't have anything that might block the connection to the server!

    I never had any problems before, and now there's this problem.

    I use Windows 7 64-bit, latest patches and all.

    Open your Skype account setup page:

    https://secure.Skype.com/portal/account/settings

    If your Skype account is associated with the account of Microsoft, then try to separate them.

    https://support.Skype.com/en/FAQ/FA12211/how-do-i-unlink-my-Skype-and-Microsoft-or-Facebook-accounts

  • Wi - Fi satellite A355-S6925 disconnection problems

    Hello

    I've owned this phone for about 4 months now. It is running Vista and I encountered problems with the wireless network since then. I use a D-Link DIR-655 router. My problem is:
    When they surf the internet, web pages will load quickly a minute and struggle to load the other and ultimately fail with a network disconnected to appear in the lower right icon. Network will reconnect automatically. No matter what time of the day or loacation in the House. Happening right next to the router.

    Downloading files on the net, the network disconnects for 10 seconds and will reconnect automatically.

    I have a Roku device connected to the network. Never, this device disconnects from the network. My only problem is that when the video steam in this block, I limited the ability surf on laptop. But no disconnects with Roku.

    Wii is connected to the network. No disconnects with this device.

    Wireless printer works very well.

    Just a problem with the laptop. I googled this problem without success for an answer. Help, please. To witsend!

    Connection signal strength: excellent all over the House, even next to 2.4gh Articles

    Thanks in advance for your help.

    Frank

    In your case I would first update the WiFi drivers. You can find it on the Toshiba site and Akuma already post the link.

    If you use Vista on your laptop, you must turn off the power save for the WLAN. This Toshiba document could be useful for you:
    http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

    Make sure the router and the laptop using the same standard WiFi, 802.11 g for example.

    Last but not least try to update the BIOS.

    I read often in the forum a driver and/or BIOS update is to fix the problem if it s worth a try. ;)

  • Connect disconnect problem (SL 500, windows7)

    Hello friends,

    I am facing a weird problem with my 500 SL with Windows 7 (I also lucid Linux installed on the system).

    (Note: my laptop came with Vista)

    As I begin my computer after it was closed (and NOT for a reboot) it keeps beeping sound from the start connect-disconnect power until I have completely load the operating system. (independent of windows or ubuntu) But after startup is complete he stops himself and he went after it. Anyone faced this problem? All thought it might be because?

    Some observations and comments on my machine.

    1. this product only when I start and the machine not on reboot.

    2. my vista has been currepted earlier. s I reinstalled using an another OEM my volume keys and the thinkvantage (blue) button does not work since then. (This beeper number is one or two weeks now)

    3. I noticed a little slow start for 7 but still all right.

    4. I have thinkvantage Manager of power installed. (It shows connected and disconnected when the ringing lights)

    5. my battery is old enough has around 30-40 min capacity.

    Could be it is bad, or the power port where it connects. Only way to check is by connecting another adapter compatible lenovo (good).

  • Wi - Fi disconnection problems

    Hello

    My desktop computer, running Windows XP Home Edition, has recently started disconnect frequently and without warning my wireless network.  Two days ago, he finally lost the connection permanently, and I was not able to recover.  I'm not tech-savvy, so I do not know what information will be useful to you, I'll give you everything I can.  I have AVG Internet Security and I also have System Mechanic.  I ran virus checks, cleaned my browser cache and defragged my hard drive.  I tried to remove and then re - enter my wireless network information, and I had my landlord also press the reset on the modem.  None of these things helped him.  I borrowed a laptop which has no problem connecting to the network without wire right next to my office, it seems unlikely that it is a problem of signal strength.

    Please let me know what I should be looking to try or what information would be useful for you.

    Thanks a ton,
    Steph

    Hi Steph8,

    You can read the following article and see if it helps.

    How to troubleshoot wireless network connections in Windows XP Service Pack 2

    See also:

    Windows wireless and wired network connection problems

  • Laptop HP 2000: HP laptop computer wifi disconnection problem

    Hello

    I run my laptop on 2 networks, one of the House and another in my Coaching and both have the same network provider company. The problem is my computer laptop wifi disconeects several times in the network of Coaching and to reconnect I restart my system. But it doesnot disconnects on my network at home...

    I want to clear that his only happens in my portable, not on any other laptop in coaching... Suggest me what should I do, I am not able to get rid of it after several method try...

    Hi @Pradeep_sfdc ,

    Welcome to the HP Forums! I see that you have problems to connect to a particular network. I'll be happy to help you. In General, when this happens there is a problem with the network itself because the laptop runs normally with the other network.

    When you are connected to the network trial Coaching run the built-in Windows troubleshooting tool to see if it detects a problem. This document from HP, wireless network and Internet troubleshooting will show you how to do this.

    I would say the power cycling your modem and router, I have included the following steps:

    Network power cycle:

    1. turn off your laptop.
    2. unplug the power to your router.
    3. disconnect the power to your modem.
    4. wait at least 45 seconds.
    5 reconnect the modem and wait for it to come back online.
    6 plug in the router and wait for it to come back online.
    7. turn on your laptop and test your connection.

    If nothing else works, then I suggest that you contact your internet service provider because the router or the modem would need a firmware update or a later version.

  • VCS DISCONNECTION PROBLEM

    I have assistance who need the situation on VCS running X7.2 version.

    I can't kill a call that was for days... When I try to disconnect there. When I look at details is States 'cancellation', but does not die.

    Any ideas... The call comes from a neighbor, I put in place with other VCS.

    I haven't restarted the system in more than 196 days.   I have a few other calls via the old 20hours and they specify also (cancellation).

    I also called the site hosting the other VCS and without registration it has do with the information I have on my VCS.

    Ideas also if I SSH in the area what is the command line syntax to perhaps force disconnection it?

    We saw the problem similar and same weird outdated records. A reboot of the VCS solved the question - of course, this is not ideal, but it only a computer!

  • Module Event - connection/disconnection problem

    Hi all

    I created a subdomain http://trade.primealarms.UK at the present time users log into this fine.  When they go to sign up for a primealarms.worldsecuresystems.com event disconnects users so that they have to each connection or fill in their details.

    Has anyone previously met or had problems with subdomains and can point me in the right direction?

    Any help would be greatly received.

    Thank you

    Tom Kelly

    Robert not quite right.

    If you have configured the form of connection with sponsor on this connection correctly BC will ensure that you stay connected when you access both secure pages.

    If you actually insert a login in British Colombia now form the form action would be something like this:

    https://YOURSITE.worldsecuresystems.com/ZoneProcess.aspx?ZoneID=5784&Referrer={module_siteUrl, true, true}

    This will ensure that you are connected to both ends of the site areas.

    Tom, your login account ZoneProcess.aspx?

  • Satellite A-L50-19N WiFi disconnection problem

    Yesterday I bought this computer with Windows 8.1 installed. After each start, is to have the connection for a few minutes, then it always disconnects. It shows that the internet connection is active, but are not open pages in a browser. I tried updates drivers and nothing helped.

    Thanks for the tips.

    > It shows again that the internet connection is active, but are not open pages in a browser.

    (1) have you tested the internet connection using different internet browsers?
    I recommend doing this.

    (2) did you notice that this internet issues using the laptop with battery only or also running to the power outlet?

    (3) the laptop was equipped with an Atheros WB335 wireless network card. Try to update the driver WLan too.

  • Disconnection problem

    Hello

    When I logout of my index Page and Login Page, then open but when I click back button in browser then open Index Page. I desire once disconnection then not open another clik on back button of browser like facebook page...

    I add my tracking code:

    Application.CFC

    < cfproperty >

    < cfset this.datasource = "TestingDataSource" >

    < cffunction name = "onRequest" >

    < name cfargument = "templatename" / >

    < cflogin >

    < isdefined ("form.submit") cfif >

    < cfif form.username is "admin" and form.password is "admin" >

    "< cfloginuser name =" "#form.username #" password = "#form.password #" roles = "admin" >

    < cfelse >

    < cfset request.errorMessage = "Login Incorrect, Please try again..." >

    < cfinclude template "login.cfm" = >

    < cfreturn >

    < / cfif >

    < cfelse >

    < cfinclude template "login.cfm" = >

    < cfreturn >

    < / cfif >

    < / cflogin >

    < cfinclude template = "" #arguments.templatename # ">"

    < / cffunction >

    < / cfproperty >


    index.cfm

    <! DOCTYPE html >

    < html >

    < head >

    < meta http-equiv = "Content-Type" content = "text/html"; charset = "utf-8" / >

    < title >

    Untitled document

    < /title >

    < / head >

    < body >

    Home page < h1 > < / h1 >

    < h3 >

    Welcome to Photo Gallary...

    < / h3 >

    < a href = "logout.cfm" > sign out < /a >

    < / body >

    < / html >

    Login.cfm

    <! DOCTYPE html >

    < html >

    < head >

    < meta

    http-equiv = "Content-Type" content = "text/html"; charset = "utf-8" / >

    < title >

    Untitled document

    < /title >

    < / head >

    < body >

    < cfform >

    < table width = '500' border = '0' >

    < b >

    < td >

    User name:

    < table >

    < td >

    < name cfinput = "username" type = "text" required = "Yes" message = "Please enter a username" / >

    < table >

    < /tr >

    < b >

    < td >

    Password:

    < table >

    < td >

    < name cfinput = "password" type = "password" required = "Yes" message = "Please enter a password" / >

    < table >

    < /tr >

    < b >

    < td >

    < cfinput type = "submit" name = "submit" value = "submit" >

    < table >

    < /tr >

    < /table >

    < / cfform >

    < isdefined ("request.errorMessage") cfif >

    < style p = "color: red" >

    #request.errorMessage # < cfoutput > < / cfoutput >

    < /p >

    < / cfif >

    < / body >

    < / html >

    Logout.cfm

    < cflogout >

    < cflocation url = "login.cfm" > "



    I tested the latest code I gave you on Internet Explorer 11, 29 Firefox and Chrome. This works. When I press the back button, it does not take me back to index.cfm.

    To test, use the latest version of Application.cfc (posted may 6, 2014 16:53). Use the following set of new meta tags in index.cfm to prevent caching.

  • Cisco VPN disconnection problem vpn client

    Hello

    We have a 8.2 (3) Cisco ASA and several vpn client ipsec that connect to it (5.0.07.0290 - k9 and 5.0.07.0410 - k9).

    ExExactly after that 4 hours of these clients vpn connections are deleted even if the client is still sending traffic. I can't find any parameter configuration in order to avoid this connection drop. Someone has an idea how solve it?

    I have

    I have

    AF

    Hello

    Please paste the output of "sh cry run." We can check the values of life.

    also, you can activate him debugs following like half an hour before that the Client waits for the time to unplug.

    Deb cry isa 127

    Deb cry ips 127.

    We can check the reason for the debugging by using the ip address of the client.

    I hope this helps.

    Kind regards

    Anisha

    P.S.:Please assign this thread answered if you feel that your query is resolved. Note the useful messages.

  • Disconnection problems random e1000

    Hello

    For some reason recently for no rhyme or reason that some of my virtual machines will cut their nic E1000 to where in the settings of the virtual machine, it shows its not connected.  You can select the connected check box and select OK, but when you return settings it is unchecked again.  I get the VMXnet3 to work on these machines virtual annoying but now it happened on a linux machine and I can't get the E1000 to reconnect!  Can anyone give me ideas or where to start fixing this?

    Hello

    What version of vSphere do you use?

    There is a known bug in 5.1 U2 that matches your symptoms: http://kb.vmware.com/kb/2072694

    Concerning

    Tim

  • XPS 15 (9530, end 2013)-problems of childcare facilities, USB device is disconnected

    Hello

    I got the XPS 15 (9530, end 2013) a few days earlier with widnows 8.1 installed on it and since day 1 I'm running into a weird problem. All my USB devices keeps disconnecting. If its my phone (HTC a M8) or my portable hard drives. I tried several cables and the result is the same.

    I tried to connect all the devices on the different laptops and they work very well except for my laptop. One thing that I know you guys is that if I have my phone connected with the laptop, it charges great however, I am unable to navigate any file on my phone because it keeps disconnecting.

    Any help?

    I could solve my 9530 Dell USB connection/disconnection problem with this combo.

    BIOS A05
    Use a real lightning cable Apple Original
  • Magic Mouse Lag and disconnection

    10.11.5 MacPro 5.1 mid-2010

    The offset of the mouse and the disconnection is so bad that I had to go back to a mouse that is causing a problem in my production. I'm a graphic designer and the need that the mouse. I tried all of the solutions I've read here and on the web without success. I'm going to buy a bluetooth adapter to see if that helps at all. Any suggestions on this dongle/adapter or if someone found a solution to this problem of bluetooth. I have new usb 3.0 devices and cables to come this week and as I read disconnection worsens with usb 3.0.

    Anyone, please help before I have no hair left!

    If your using a first generation Magic Mouse, the disconnection problem is sometimes caused by faulty battery contacts. Here's a solution:

    How to fix the magic mouse disconnect problems

    Tracking errors can be fixed by simply cleaning the lens: Year Easy Fix for a Magic Mouse Tracking problem

    And some bluetooth connection problems are caused by a corrupted preferences file: How to fix the OS X Bluetooth Wireless problems

    Tom

Maybe you are looking for