BEFSX41 router does not

My internet worked for a while, but recently I press on and held the reset button and since then it has stopped working. Ive been trying to figure out what to do, but Im lost. I'd appreciate the help. Thank you.

If your Internet Service is DSL follow this link

Tags: Linksys Routers

Similar Questions

  • Router does not not after installing updates

    I installed the updates on my computer and the next morning my wireless does not work!   I can go on the internet when I plugged my ethernet cable.  Whenever I try to go on the internet without being plugger to the ethernet cable that wireless network connection not connected, he said.  Already contacted AT & T to know is that they were having DSL problems in the region, but they said no.  Apparently my router does not work after I made my Microsoft Updates.

    Hi Racer29,

    -Who were the updates (KB) that you have installed?

    Does restoring the system to a point when it wireless was working and install the updates one by one. Restart the computer after installing each update and check the update at the origin of the problem.

    See How to restore Windows XP to a previous state

    Gokul - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Brand new Dell 2808 router does not work.

    1. the 2808 is not connected to the internet.

    2. when it is received, the 2808 under tension with the disabled DHCP server and port active routing. It is the default setting. Not good to use normal, but worked as advertised. The DHCP server is usually needed in a small switch. I needed an active DHCP service.

    3. I've changed managed and connected fashion. A "saved to restore configuration screen" appeared. Horrible thing. Trashed the router. There is no saved configuration, the 2808 restarts. 2808 completely stopped working after that.

    4. after resetting 2808, the 2808 seemed no longer routing packets, so nothing works now with the exception of the web client, which does not seem to do anything for the networking.

    5 I did activate the DHCP client and configure the IP pool. However, no routed packets, nothing works. Port au port data routing does not work. The DHCP server is not required to allocate IP addresses.

    6. I paid 80 dollars to a so-called "Dell Customer Service" held to solve the problem. They have failed. It turns out that they did not know how to work the 2808.

    7 I have not understood how to contact customer service the Dell directly for the 2808. Not good. I bought a T7810 workstation in 2015 with 5 years of service from Dell, and I don't know how to contact Dell support technical support. I use the 2808 with the T7810. Both should be covered if the customer service could be found.

    8. bottom line, I bought the 2808 on July 27, 2016, and many hours later my effort and more hours of a consultant, I am frustrated trying to run home mode: a router 8-port 1000-baseTpacket with a DHCP Server enabled. I'm about to box 2808 router back to Amazon because it does not work and cannot be implemented.

    Any ideas?

    Thanks in advance to 1 million.

    Keith

    The simplest method to contact support is to enter the serial number on our support site.
    http://Dell.to/20VqlwQ The site will then list the various methods to contact support for this range of products.

    The 2808 PowerConnect doesn't have a console port, so recovery is somewhat limited. If the switch is on firmware version 1.0.0.38 or earlier, then a factory reset can be done by simply changing the transition from managed to not managed and then again. If the switch is on more recent firmware, however, this process does not reset the switch to factory default.

    Being a new switch, it should be under warranty. If the switch is not recoverable, support should be able to get a replacement sent to you.

  • My wireless router does not appear when I shoot to the top of my devices. It shows my fax, modem, scanner and a few others. But not my belkin wireless.

    My wireless router does not appear when I shoot to the top of my devices. It shows my fax, modem, scanner and a few others. But not my belkin wireless. And when I try to add it, the system can't find it. Please help

    Belkin support for your model, for installation instructions.

    Your router will not appear in the devices

  • So, updated for Win 7. Clean install. 1. no installed audio device? 2 Ethernet adapter not found. Yes router does not. Planet WNRT - 617G

    Clean install. 2 problems. 1. no installed audio device? 2 Ethernet adapter not found. Yes router does not. Planet WNRT - 617G

    Probably you run first win7 Upgrade Advisor, who did you would probably show your system as not supported under win7

  • HTTPS access to the router does not work with Firefox 33.0

    HTTPS access to the router Linksys wrt610n has worked so that Firefox 32.0.3 the dd - wrt software of this router is self-signed certificate with the public key RSA = 512 bits (Yes, it's too short today). From Firefox 33.0 and whose 34, 35, 36-access https does not work. It is desirable to restore https behavior as in Firefox 32.0.3 (with warning and ability to do security exception). Please see the attachment with a https query result in different versions of Firefox.
    Thank you.

    Hello, make suggestions to the https://support.mozilla.org/en-US/questions/1038487 help in your case?

  • BEFSX41 router will not let me delete the DNS entries

    I'm trying to set up a BEFSX41 router that lies behind a cable modem Motorola SB 5120.
    Somehow it now shows the DNS entries in the basic configuration page. Comcast advises me to zero all these entries. When I make the attempt, a message appears saying the entry is not valid, and when I close the entrance warning comes back. The router is configured to obtain its IP address automatically of the SB 5120. This could be the cause of this behavior?

    I suggest that reset you your router and reconfigure all your router settings from scratch, reset your router should solve your problem.

    Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  • Virtual router does not work-«the group or resource is not in the appropriate State to make the request in question»

    I installed virtual router manager v1.0 but his does not work. When I leave router virtual by connection to the local network from my laptop, its shows an error. It is «the group or resource is not in the appropriate State to make the request in question» Please give me the solution of this problem. I want to start the virtual router and use the internet connection with other devices.

    I installed virtual router manager v1.0 but his does not work. When I leave router virtual by connection to the local network from my laptop, its shows an error. It is «the group or resource is not in the appropriate State to make the request in question» Please give me the solution of this problem. I want to start the virtual router and use the internet connection with other devices.

    Thank you so much for viewers. Virtual router works properly. I use internet for my laptop for my other devices.

  • F380 printer with a USB modem / router does not work as a scanner

    Hello, I have a Hp F380 printer I've always used on my PC, in Windows 7, via the USB port.

    Given the need to print and scan from another PC on the same router modem, I tried to use the USB port master who is mounted on my modem router (Alice Gate VoIP 2 Plus Wi Fi), to which I have connected the F380 to share with the new PC.

    I followed the steps in the manual installation of the modem and everything was fine except for the use of the scanner.
    The scanner, you can not use because the HP Solution Center does not see the device if it is connected to a USB port on the local PC (I normally, I used this for my scans)

    Even try to use scanning directly from the "devices and printers", click the right button of the mouse over the device icon in the menu window F380 does not appear the scanning features that appear in the place when the F380 is connected to a USB port on the local pC.
    I also tried to analyse using paint, Windows live photo gallery and scanner and fax in Windows, but the problem is always the same: the scanner is not detected.

    Do you have a solution for this?

    Thank you very much

    Hello

    The scanner cannot be access via a shared printer. The printer must be connected directly to the device, or you must connect using a standard network connection.

  • ESXi-> Cisco 3850-> router upstream routing does not

    Please see the attached diagram.

    I currently have the installation of "router on the stick" and I move to lass on Cisco 3850 battery. Initially, I moved VLAN100.  I can ping to each of the directly connected devices (i.e. the router 3850 and 2911). I can't do a ping to a virtual machine on vlan 100 router and vice versa. Here's what works what doesn't work.

    Work in both sense

    VM (172.16.100.51) <->GW on IVR (172.16.100.254)

    VM (172.16.100.51) <->an another IVR (172.16.230.254)

    VM (172.16.100.51) <->Int L3 on 3850 (10.2.2.2)

    L3 on 3850 (10.2.2.2) int <->int L3 on 2911 (10.2.2.1)

    SVI on 3850 (172.16.100.254) <->int L3 on 2911 (10.2.2.1)

    Does not not in both directions:

    VM (172.16.100.51) <->L3 interface on 2911 (10.2.2.1)

    VM (172.16.100.51) <->else NOT routed on 3850

    I have following routes on 2911 and 3850.

    3850:
    IP route 0.0.0.0 0.0.0.0 10.2.2.1

    2911:

    IP route 172.16.100.0 255.255.255.0 10.2.2.2

    IP route 172.16.230.0 255.255.255.0 10.2.2.2

    If in theory everything that comes from 172.16.100.51 no 3850 premises must be sent to 10.2.2.1 since it is the default route on 3850.

    I suspect that this is a problem with the license. I have IP Base feature set stack license 3850. I have checked using the license to show and display the version controls.

    According to this FAQ Cisco, http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3850-..., routing should work because I do not have more than 16 static routes and I'm only using base L3 routing features.

    I am at a loss here. What is going on? Can someone please confirm?

    I bought WS-C3850-24 t-S,

    http://www.Cisco.com/c/en/us/TD/docs/switches/LAN/catalyst3850/software/...

    thinking that I would be able to use Lass and keep all traffic to get into the routers as switches upstream of our most ancient were only L2.

    It looks like an upgrade for all IP Services features is possible.

    https://cisco3850.wordpress.com/2015/04/22/licensing-for-cisco-catalyst-....

    That I have to upgrade the image so or can I just pass the license using the built-in commands described here.

    http://www.Cisco.com/c/en/us/TD/docs/switches/LAN/catalyst3850/software/...

    I hope that I don't have to reboot switches because this configuration is currently using this stack as the core and distribution.

    Any help is appreciated.

    Thank you

    Turning and the "IP routing" did?

  • WUMC710 - access Web base Setup Page &amp; router does not see WUMC710

    Just got the WUM710 plugged into my PC and Setup with my router with WEP key, which was straight forward.

    I want to update the firmware on the WUMC710. Then I downloaded the firmware and have it on my desk. My problem is that I can't access the web-based configuration page. I tried the default 10.100.1.1 and I get an error page. So after reading the instructions on how to connect, I checked my router to see if it has been assigned a different IP address from the DHCP server. My router doesn't even display the WUMC710 anywhere, but I'm connected to it and using the internet with it.

    Then I disconnected the WUMC710 from my PC and connected directly to the router itself. Again, the WiFi works fine but the router is not display or display the WUMC710 anywhere.

    My router is the Asus RT-AC66U.

    Any help will be greatly appreciated.

    OK, I managed to fix it.

    As I bought the WUMC710 someone on eBay, obviously it has been installed and configured for their connection. DOH!

    So I just had to press the small reset under the WUMC710 button while it was plugged into my router.

    Its now appear in my routers setting.

  • My router does not correctly ping

    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
    C:\Users\I LOVE U DI DARLING > ping 192.168.2.1
    Ping 192.168.2.1 with 32 bytes of data:
    Reply from 192.168.2.1: bytes = 32 time = 2ms TTL = 64
    Reply from 192.168.2.1: bytes = 32 time = 2ms TTL = 64
    Reply from 192.168.2.1: bytes = 32 time = 2ms TTL = 64
    Reply from 192.168.2.1: bytes = 32 time = 2ms TTL = 64
    Ping statistics for 192.168.2.1:
    Packets: Sent = 4, received = 4, lost = 0 (0% loss),
    Time approximate round trip in milli-seconds:
    Minimum = 2ms, Maximum = 2ms, average = 2ms
    C:\Users\I LOVE U DI DARLING > ping 192.168.2.1
    Ping 192.168.2.1 with 32 bytes of data:
    Reply from 192.168.2.1: bytes = 32 time = 2ms TTL = 64
    Reply from 192.168.2.1: bytes = 32 time = 2ms TTL = 64
    Reply from 192.168.2.1: bytes = 32 time = 2ms TTL = 64
    Reply from 192.168.2.1: bytes = 32 time = 4 ms TTL = 64
    Ping statistics for 192.168.2.1:
    Packets: Sent = 4, received = 4, lost = 0 (0% loss),
    Time approximate round trip in milli-seconds:
    Minimum = 2ms, Maximum = 4ms, average = 2ms
    C:\Users\I LOVE U DI DARLING > ping 192.168.2.200
    192.168.2.200 ping with 32 bytes of data:
    Reply from 192.168.2.200: bytes = 32 time = 3ms TTL = 64
    Request timed out.
    Reply from 192.168.2.200: bytes = 32 time = 3ms TTL = 64
    Reply from 192.168.2.200: bytes = 32 time = 2ms TTL = 64
    Ping statistics for 192.168.2.200:
    Packets: Sent = 4, received = 3, Lost = 1 (25% loss),
    Time approximate round trip in milli-seconds:
    Minimum = 2ms, Maximum = 3ms, average = 2ms
    C:\Users\I LOVE U DI DARLING > ping 192.168.2.200
    192.168.2.200 ping with 32 bytes of data:
    Reply from 192.168.2.200: bytes = 32 time = 10ms TTL = 64
    Reply from 192.168.2.200: bytes = 32 time = 3ms TTL = 64
    Reply from 192.168.2.200: bytes = 32 time = 1ms TTL = 64
    Reply from 192.168.2.200: bytes = 32 time = 2ms TTL = 64
    Ping statistics for 192.168.2.200:
    Packets: Sent = 4, received = 4, lost = 0 (0% loss),
    Time approximate round trip in milli-seconds:
    Minimum = 1ms, Maximum = 10ms, average = 4ms
    C:\Users\I LOVE U DI DARLING > ping 192.168.2.200
    192.168.2.200 ping with 32 bytes of data:
    Reply from 192.168.2.200: bytes = 32 time = 5ms TTL = 64
    Reply from 192.168.2.200: bytes = 32 time = 3ms TTL = 64
    Reply from 192.168.2.200: bytes = 32 time = 3ms TTL = 64
    Reply from 192.168.2.200: bytes = 32 time = 2ms TTL = 64
    Ping statistics for 192.168.2.200:
    Packets: Sent = 4, received = 4, lost = 0 (0% loss),
    Time approximate round trip in milli-seconds:
    Minimum = 2ms, Maximum = 5ms, average = 3ms
    C:\Users\I LOVE U DI DARLING > ping 192.168.2.200
    192.168.2.200 ping with 32 bytes of data:
    Reply from 192.168.2.200: bytes = 32 time = 907ms TTL = 64
    Reply from 192.168.2.200: bytes = 32 time = 6ms TTL = 64
    Reply from 192.168.2.200: bytes = 32 time = 3ms TTL = 64
    Reply from 192.168.2.200: bytes = 32 time = 2ms TTL = 64
    Ping statistics for 192.168.2.200:
    Packets: Sent = 4, received = 4, lost = 0 (0% loss),
    Time approximate round trip in milli-seconds:
    C:\Users\I LOVE U DI DARLING > ipconfig/all
    Windows IP configuration
    Name of the host...: ILOVEUDIDARLING
    Primary Dns suffix...:
    Node... type: hybrid
    Active... IP routing: No.
    Active... proxy WINS: No.
    Bluetooth network connection Ethernet card:
    State of the media...: Media disconnected
    The connection-specific DNS suffix
    . :
    ... Description: Device Bluetooth (personal area network)
    Physical address...
    . : 00-26-5E-DF-BF-F1
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Wireless network connection Wireless LAN adapter:
    The connection-specific DNS suffix. :
    ... Description: Dell Wireless 1397 WLAN Mini Card
    Physical address.... : 0C-60-76-0B-BB-8E
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Address IPv6 local link...: fe80::fca2:dd8:de36:24dc % 11 (Preferred)
    IPv4 address: 192.168.2.100 (Preferred)
    ... Subnet mask: 255.255.255.0.
    Lease obtained...: Monday 3 December 2012 13:03:46
    End of the lease...: Tuesday 4 December 2012 13:03:48
    ... Default gateway. : 10.10.10.1.
    192.168.2.1
    DHCP server...: 192.168.2.1.
    DHCPv6 IOOKING...: 202137718
    DHCPv6 DUID customer...: 00-01-00-01-18-3D-9D-2F-00-25-64-4E-62-4B
    DNS servers...: 192.168.2.1.
    NetBIOS over TCP/IP...: enabled
    Ethernet connection to the Local network card:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Marvell Yukon 88E8040 PCI-E Fast Ethernet
    Controller of
    Physical address.... : 00-25-64-4E-62-4B
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Network adapter Ethernet VirtualBox:
    The connection-specific DNS suffix. :
    ... Description: VirtualBox Host-Only Ethernet adapt
    Physical address.... : 08-00-27-00-00-2E
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Address IPv6 local link...: fe80::2d38:a401:a662:ae85% 18 (Preferred)
    Autoconfiguration IPv4 address. . : 169.254.174.133 (Preferred)
    ... Subnet mask: 255.255.0.0.
    ... Default gateway. :
    DHCPv6 IOOKING...: 554172455
    DHCPv6 DUID customer...: 00-01-00-01-18-3D-9D-2F-00-25-64-4E-62-4B
    DNS servers: fec0:0:0:ffff:1 1%
    FEC0:0:0:FFFF:2 1%
    FEC0:0:0:FFFF:3 1%
    NetBIOS over TCP/IP...: enabled
    Tunnel adapter isatap. {39FBB145-05ED-43E9-A687-CB0C92FE087F}:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft ISATAP adapter
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    Tunnel adapter isatap. {56C60401-8681-45C1-8943-0A936C7FF74F}:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Adapter Microsoft ISATAP #2
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    Card tunnel Teredo Tunneling Pseudo-Interface:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    Description...
    . : Teredo Tunneling Pseudo-Interface
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    Tunnel adapter isatap. {FB6ACE66-A350-4D7B-BE23-261F2818F22D}:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Adapter Microsoft ISATAP #3
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    Tunnel adapter isatap. {B7455C4C-CCFB-438B-8D40-8A0DF55FDBD3}:
    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Adapter Microsoft ISATAP #4
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    C:\Users\I LOVE U DARLING DI >

    There's at least one thing wrong... but it's not ping your router:

    Wireless network connection Wireless LAN adapter:
    The connection-specific DNS suffix. :
    ... Description: Dell Wireless 1397 WLAN Mini Card
    Physical address.... : 0C-60-76-0B-BB-8E
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Address IPv6 local link...: fe80::fca2:dd8:de36:24dc % 11 (Preferred)
    IPv4 address: 192.168.2.100 (Preferred)
    ... Subnet mask: 255.255.255.0.
    Lease obtained...: Monday 3 December 2012 13:03:46
    End of the lease...: Tuesday 4 December 2012 13:03:48
    ... Default gateway. : 10.10.10.1.
    192.168.2.1
    DHCP server...: 192.168.2.1.
    DHCPv6 IOOKING...: 202137718
    DHCPv6 DUID customer...: 00-01-00-01-18-3D-9D-2F-00-25-64-4E-62-4B
    DNS servers...: 192.168.2.1.
    NetBIOS over TCP/IP...: enabled

    Most home networks should not have two "default gateways', and in particular a single NETWORK card should not have two of them.  Did you do that deliberately?  The second default gateway is connected to your virtual machine?
    Multiple default gateways can cause connectivity problems
    Configuring multiple gateways on a network

  • New wireless router does not have the printer works

    I am trying to help a friend who got a new O2 router provided and now it is installed its Deskjet F4500 no longer works, she has Vista Edition Home Premium, he did before another came, we tried the following support Web page without success please can anyone advise I guess there to with the new code being different routers , but I'm not technical, so don't know how to fix in this

    Replacement of your wireless router try now.

    http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  • accidentally turned off system now in router does not connect to internet

    accidentally turned off computer power switch, now everything is on the router required for wireless transmission down seems unable to connect to the internet. I'm sure that the answer is simple, but I'm not having any luck

    Try to turn off the router for a few minutes, restart and then after waiting a few minutes, restart your computer and see if it connects.

    I hope this helps.

  • Router does not display Machine Vmware

    Hello people,

    Please forgive my naïve questions. I am very new to vmware and worldwide IT I tried searching on this topic and failed to find one.

    I installed VMWARE server 2.0.2 and up to now his works not all good. I use it for my study about the 70 640 of microsoft exam. I can't find answer to the following:

    The ip address of my router (non-virtual physics) is 192.168.1.254/24. It serves also addresses providing any dhcp servers to customers in the range of 192.168.1.64 - 253. I installed a Windows 2 k 8 Server on a vmware machine prompt. On this vmware machine, the ip address is 192.168.5.2/24 and its default gateway is 192.168.5.1. I have another vmware customer have the ip address in the range on the beach of 192.168.5.x. Windows 2 k 8 can ping all the customers that they are in network 192.168.5.x.  Please note that all vmware machines are configured as Bridged mode.

    Now, if I look in my router (physical) I don't see any machine vmware as an active pc connected to the router. I don't understand how is it then all vmware customers are able to ping each other because I can't see them not connected to the router/Switch.

    One last question, if I change my ip address of win2k8 vmware machine to get it automatically, then I can see the machine vmware as a pc connected to my router. But if I assign the same IP manually (DHCP ip address automatically gives him) then I don't see the vmware as a connected pc on the router pc more.

    Thanks for your precious time people.

    Thread moved to the forum of VMware Server 2.

    Welcome to the forums!

    If all your guests have a network bridge connection and one or several guests have an IP address 192.168.5.0/24 while your phyiscal router has an IP address of 192.168.1.0/24 you run two IP subnets on the same physical network address. In general, it is possible, but each subnet systems cannot see each other.

    You need a router (which may be a virtual machine or a physical device) connected to each IP subnet so that they can see each other. You better separate the two IP subnets. Run the 192.168.5.0/24 on a virtual private network on the VMware host (you can use the virtual network VMnet2 - VMnet7) and change the type of vNIC go to bridged customized by using this network in particular. A guest needs two vNIC, one connected to the virtual network and a bridge. This comment is in need of a routing engine (either use a Windows OS Server a RRAS dinstall on it or on a Linux machine with routing enabled). That it is plugged into the two IP subnets (a phyiscal, a virtual) that acts as a router.

    AWo

    VCP 3 & 4

    \[:o]===\[o:]

    = You want to have this ad as a ringtone on your mobile phone? =

    = Send 'Assignment' to 911 for only $999999,99! =

Maybe you are looking for

  • Mac Mail will constantly be disconnected with Time Capsule

    It has been ongoing for more than a year: I the time Capsule AC version (bought fall 2014) and uses a Macbook (version slim retina released in March 2015.) 12 "I am constantly the mailbox in offline mode in the Mail from Mac application.  The status

  • Sat Pro L10: Disable the wake on lid sensor

    I have a Satellite Pro L10 and disable all power on/set off the power of the actions that occur when the lid is closed - that's very well under windows, and I have disabled things sur-cloture in the power supply of the control panel section. BUT in P

  • FFMPEG ERROR

    I RECENTLY HAD A MISTAKE WHO INFORMED ME THAT FFMPEG DOES NOT WORK PROPERLY, NOW I CAN'T USE MY VIDEO EDITING PROGRAM, I NEED A SIMPLE SOLUTION AS IM NOT VERY TECHNICAL, I SEARCHED THE INTERNET BUT HIS CONFUSION, MY VIDEO EDITING SOFTWARE ALLOWS ME T

  • HP Pavilion P6-2170 - support for virtualization?

    I bought a HP Pavilion P6-2170 today and wanted to turn to virtualization Hyper-V (I run Windows 8 Enterprise). The CPU would support it (Core i7), but I'm not sure about the motherboard (it's a 2AC2 of PEGATRON CORPORATION 2.00).  There is no option

  • Photosmart c5580 all-in-one doesn't have the option scan to Word

    I'm trying to scan a document to edit in Word. I don't have the option to do so. I think it's maybe because I reinstalled from the Web site because I can't find my CD. Is it possible to add this option of detection as text instead of an image? Thank