BEFW11S4 update to?

Similar Questions

• BEFW11S4 v.4 and Vista - firmware upgrade failure

  Hello

  I've had this router for about 5 years, it runs with XP without any problem. Since I got a new laptop with Vista, the wireless connects for an hour or two, and then falls back and I have to unplug the router for five seconds, then reconnect to reconnect (my other laptop with XP has not this problem).

  I understand that there is compatibility between the BEFW11S4 v. 4 and Vista problems so I tried to update the firmware of dartybox.com and kept getting a message that failed. I hard rebooted the router but button of restart 30 seconds and the upgrade has always failed. I so re-set to factory settings through the online admin to the router, re-uploaded the implementation level and still got the emssage failed (I am sure that the model number & version is correct and I download the appropriate firmware upgrade).

  Is there anything else I can do another one) buy a new router; (b) living with school drop-outs; (c) remove Vista and go back to XP?

  Thank you

  Bigdank

  Genius! I have changed the name of code.bin, went to the admin > tab upgrade firmware and the upgrade file. I had a wireless without interruption ever since, even after the awakening of the laptop to sleep.

  Thanks for your help

• WRT160NL cannot connect to the web interface after firmware update

  I've updated the firmware to unofficial http://mirwifi.org/download/fw/WRT160NL/wrt160nl-0.1.3-pre5.bin and since then I can not connect to the router through the web interface. What can I do? Is it possible to update the firmware to the official without web interface? Thanks in advance for any help.

  The router's default IP address is 192.168.1.1. Try to ping the IP address of the router and check if you get answers from the router.

  Open the Internet browser and in the address bar type http://192.168.1.1. See if you can open the router configuration page.

  If this does not work then you can try to update the official firmware on the router using the TFTP.exe file.

  Disable the firewall on your computer. Connect the computer to the router with the Ethernet cable.

  (1) download the official firmware file from the site Web of Linksys router. Save it to your computer.

  (2) download the tftp site Web of Linksys. Follow this link to search for the file tftp. You'll find downloads for router BEFW11S4. Select the version 3.2 hardware and download the installation wizard. Save it to your computer.

  (3) run the installation wizard. In the server box, type the IP address of your router. In the password box, type the password of the router. Default password for the router is admin. Find the file of the official firmware you have already downloaded and click on upgrade.

  See if it works.

  After upgrading the Firmware on the router, it is recommended that you must reset the router and reconfigure.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 10 seconds. Power cycle the router and reconfigure.

• Problem after upgrading my version of firmware Linksys router BEFW11S4 t0 1.44.2z

  I have a using a Linksys BEFW11S4 router and have recently updated the firmware
  the version 1.44.2z but have experience the following problem.

  -When I want to make changes to the installation, the password and the DHCP tab, the
  router ask me the password. Pls refer
  to peak 1 for screenshot.
  -By entering the password "admin", the router keep prompting me to
  Re-enter the password. So I was unable to
  all of the changes.

  Could someone advise me the solution for this problem? Thank you.

  My router information are as follows,
  Model: BEFW11S4
  Serial number: G2711005225

  Hi, I managed to fix it by reinstalling IE. Thanks to the previous reviews.

• BEFW11S4 v4: cannot download from LinkSys Web site tftp.exe

  Hi all!

  I am a new user on this forum.  I've seen a lot of useful information here, so I KNOW that someone has the answer to my problem.

  The power light on my trusty BEFW11S4 v4 flashes and nothing I tried to solve the problem has worked.  I downloaded the latest firmware (1.52.03) but I can't go to the router configuration page.  So says the site Web of LinkSys, you can go in the back door by using their routine tftp.exe.  It is, whenever I try to download I get an error message "Unable to connect" Windows.

  Anyone know where I can download the correct tftp.exe file for my unit so I can try to update the firmware?

  Thanks in advance for any help you can give me.

  I thank very you much for the link to the download.  I'm on the road right now, but I will try this fix as soon as I get back.  I'll let everyone know how it comes out.  Thanks again!

• BEFW11S4 version?

  Hi good morning and people, if it's the morning where you are. I have a BEFW11S4, as stated in the subject line. I want to update the firmware but do not know the version of the router. I guess it's version 1, because it did not indicate anywhere on the body of router. What do you say? It seems to me he would be there was something that came out after version 1. Makes me think it is version 1. I hope that a well-functioning electronic mail preferences so that when someone answers that I get a notification. Thanks to all those who can help you. (I know that the unit is old, but it works. ha.)

  Ron K.

  Thank you. That's what I thought. Large.

• BEFW11S4 use as Repeater smoothly in a 3-storey house

  I have a BEFW11S4 I try to use a Repeater seemless connected to another router wireless on the 3rd level of the House.   I have both value Static IP, DSL modem is 192.168.0.1, the Router 1 value # value 192.168.0.2 and 192.168.0.3 to the BEFW11S4.  Two routers have enabled with the same SSID, wireless router #1 on channel #1, BEFW11S4 on the #2 channel.  Router # 1A active DHCP, with encryption of 128 bit WEP and MAC address filtering.  BEFW11S4 has same SSID, WEP 128 encryption even / filtering by MAC, but the disabled DHCP address.  They are connected on a CAT 5 cable that connects the basement plugged into one of the connections four port Cat 5, running to one of the connections on the Router 1 # four 25 foot CAT5 port.   Router 1 # is a wireless 54 Mbps, while BEFW11S4 is 10 Mbps.  Network works fine, but the BEFW11S4 is constantly need to be recycled and it falls into a mode where it can no longer be detected.   Can you help me understand how to set the BEFW11S4, so it doesn't cut.  A simple power cycle corrected the problem.

  Thank you

  OK, I tried using the tftp.exe ftp://ftp.linksys.com/pub/network/ program and renamed befw11s4_v4_v1.52.02 in a short name, bef.bin. and I have had the exact same failures.  I was able to download the tool BEFW11S4_v15014_tftp.exe and befw11s4_v4_v1.50.14_code and update to the 1.50.14 level of the firmware.  I thought that maybe the level of intermediate code could be required.  Then tried the steps you suggest again, it does not always work with an INVALID FILE NAME.  While the tool is looking for something specific, other than this level of code.  Can you please place a version of the FLASH TOOL, which will work with the 1.52.02 firmware.  Thank you...

• Trying to update firmware

  Have linksys BEFW11S4 v-2

  Reference Dell 1525, Vista, w / wireless 1395 adapter

  I'm trying to update my firmware in the hope that I'll be able to get online wireless.   On the linksys configuration page, I type you want in the HELP TAB, then update the firmware box.  Problem is the firmware box does not exsist.  Can anyone advise as to why it does not show and how to make it happen?

  My main problem is that new Dell 1525 get online wireless and don't ever even if the computer says I am connected to the Linksys.  The work of 1525 very well wired and wireless to other places.

  My old computer, Windows 2000 w / D Link card works fine.

  Thanks for any help.

  Dennis

  Beaver, thanks for the reply.  I have not yet tried your advice but I got my wireless works that's why I tried to update the firmware.

  Through this forum and others, I learned a lot.  Turns out all I had to do was the transition from channel 6 to channel 11.

  Thanks again

  Dennis

• Network of abandonment (intermittent and consistent) - Dell Inspiron 7347, Win 8.1, Linksys BEFW11S4, adapter Intel dual band wireless AC 7265

  History: I just bought a laptop / Tablet Dell Inspiron 7347 (exchanged for another unit, see below).   Problems to maintain a strong connection and when connected, it is very slow.   When it is connected to the wireless router, it maintains a (slow) connection for 3-5 minutes and then craps out (restrict the connection with the yellow "!" on the WiFi in the taskbar).  He then returned to the top of 1 3 minutes later.  It's a coherent continuous cycle.  I tried to reset the default router with no luck.

  All the other devices on this router (office, phone, IPad) all hold the connection without problem at the same time, this device is not.

  Notable: Before I bought this tablet/laptop I bought an Acer Aspire tablet / laptop which had exactly the same problem on my network.  I returned the unit for other reasons (quality of construction etc.), but he had the same OS (Win 8.1).  I don't know if she had the same network adapter.

  What I tried: cycling the router - cycling the modem - router the default factory reset of small animals - U-APSD deactivation on the network card - slapping me hard - offering to the gods...

  What I tried to try: tried to update the drivers for the Intel card using the Intel drivers update (adapter drivers for Win 8.1 and Intel PROset wireless), but he kept time during download because... THE NETWORK IS NOT STABLE! (ugh!)

  The installation program:

  Dell Inspiron 7347
  OS 8.1 win that perform all updates

  Network adapter: Intel dual band wireless AC 7265

  Router: Linksys BEFW11S4 Wireless-B to wide band
  Parameters:

  Host name:	(Required by some ISPs)
  Domain name:	(Required by some ISPs)
  Firmware version:	1.45.7, October 8, 2003
  LAN IP address:	(Address: 00-0C-41-C6-49-B1)
  	.  .  .  (IP address)
  	255.255.255.0 255.255.255.128 255.255.255.192 255.255.255.224 255.255.255.240 255.255.255.248 255.255.255.252 (subnet mask)
  Wireless:	(Address: 00-0C-41-C6-49-B1)
  	EnableDisable
  	SSID:
  	SSID broadcast: EnableDisable
  	Channel: 1 2 3 4 5 6 7 8 9 10 11 (field: us.)
  	WEP: MandatoryDisable
  Type of Internet connection:	(Address: 00-0C-41-C6-49-B2)
  	Obtain an IP automatically Static IP PPPoE (for users of SingTel) RAS PPTP Heart Beat Signal select the type of Internet connection that you want to use

  Router password:	(Enter the new password)
  	(Re-entry to confirm)
  UPnP services:	EnableDisable
  Restoration

  
  Default settings:YESNO

  Host name:
  Firmware version:	1.45.7, October 8, 2003
  Login:	Disable
  LAN:	(Address: 00-0C-41-C6-49-B1)
  	IP address: 192.168.1.1 Subnet mask: 255.255.255.0 DHCP server: Activated
  Internet:	(Address: 00-0C-41-C6-49-B2)
  	IP address: 67.249.54.246 Subnet mask: 255.255.224.0 Default gateway: 67.249.32.1 DNS: 209.18.47.61 209.18.47.62 0.0.0.0 Time remaining of the DHCP: 22:33:53

  DHCP server:	Turn off
  From the IP address:	192.168.1.
  Number of DHCP users:
  Client lease time:	minutes (0 means a day)
  DNS 1:

  
  .  .  . 2: .  .  . 3: .  .  . VICTORIES: .  .  .

  I'm puzzled.   Makes me CRAZY!

  FIXED!   Check it out guys.   I'm bothering with deactivation of all the resources of the card network, add-ins etc in the hope of this narrowing... including Bluetooth.   I have a Microsoft Bluetooth mouse for the comfort sculpt ([View:www.microsoft.com/.../sculpt-comfort-mouse:550:0])

  I turned off and BOOM... everything was fine.   Also, I noticed when it was powered up, the speedtest would plunge drastically when I actually moved the mouse during the test.   See below for the result of the test with the mouse.   I can't post a with the mouse on because the test wouldn't even with it on.

  

  Hmmmm... so it turns out that it could be a problem with a product from Ms... go figure.

• Since update 10.0.2 at 6s "trash all ' in the Inbox.

  Since I did the update (10.0.2) I can no longer just "trash all ' mail inbox (Verizon).  Because I get emails 300 + a day, I need to be able to empty my Inbox easily without deleting all of them individually.  It is very irritating and time consuming.

  Anyway around this?  Thank you...

  sharikay wrote:

  Anyway around this?  Thank you...

  Not at the moment. Tell Apple you want to come back.

  http://www.Apple.com/feedback/iPhone.html

• Uninstall software update Apple says error in seller contact package package unstaller

  Try to get itunes working to make a backup of my faulty iphone before repair.

  First-itunes does not start says error. I'm trying to fix it, who said success but same error when you try to start it.

  Then uninstall completely worked. Then reinstall that seemed to be over except for a message "an older version of Apple software update already exists" then he went down and install itunes apparently had not been completed.

  Then I try to remove the update from the apple software and executed by an error in the installation program - it says there is an error in the installation and contact the supplier of the installation package. Same error if I run the uninstall command line program.

  Try to repair the Apple Software Update of programs & features Control Panel and then try to update iTunes again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Since the update for Sierra, contacts do not appear in Messages - just phone numbers.

  Since the update for Sierra, Messages no longer displays Contact names - only phone numbers.  No instructions on how to remedy this.  Ideas?

  Hello

  Go into the Contacts application and ensure that it uses the same account synchronization like the iPhone and other devices you may be using.

  Also check the part of the accounts of the Contacts application preferences and make sure that it's only using one account.

  

  21:34 on Friday. 7 October 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• Problem after update 10.0.2 iOS iPhone touchscreen

  After I have updated to iOS 10.0.2, I noticed a problem with the touch screen. Using the position of the image on the right side, near the corner, the toushscreen does not work.
  For example: when you use the keyboard, I can't type the letter 'P', have trouble typing BACKSPACE. Using the Contacts app, I can't scroll through using the alphabet bar.

  Do what idea of the problem?

  Kind regards!

  Hi fabriciorela,

  Thanks for the upgrade to iOS 10! I understand that the right of your screen is unresponsive to the touch. You can try the steps in this link to fix the problem. If the screen of your iPhone, iPad or iPod touch does not respond to touch

  If it does not help the problem, try to restore the device to factory settings. I would like to backup your important data first.

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Please use the Apple Support communities to post your question. Let us know how it turns out. Have a great day.

• USB disabled after the update of the Sierra (a short circuit and a work)

  Hi, when I bought my mbp 13 inches mid2012 (used, not new) I noticed that a USB port did not work. In the Yosemite sometimes I noticed that a USB port consumed too much energy and have been disabled. (I think because the usb port has been short-circuited. Year when it was time to update the mbp to El Capitan I had a few panic the kernel and the newspaper was shown as the last driver loaded the USB driver, so I kept the mbp with Yosemite. A few days ago, I updated for Sierra but only usb which used to work stopped working. It has enabled and turned on but Finder and disk utility does not see the drive. In an Apple dealer they said that could be established relationships with some oxide and next week will take it and see what the problem is.

  If there is someone with the same problems, please tell me what to do! I don't want to put in the trash my mac just for a flash drive... but I need!

  Hi Supermene,

  Thank you for using communities of Apple Support. Based on what you said, it appears as a USB device is not recognized in one of the USB ports. There are a few things that can cause this. I recommend you read these articles, which may be able to help solve the problem.
  

  macOS Sierra: If a USB device does not work

  Reset the management system (SCM) controller on your Mac.

  See you soon.

• I can't go to my bookmarks after update for Sierra

  I have a MacBook Pro. I just updated this week to Sierra with no problems, but now when I click on multiple points in the upper left corner to reveal my favorites and my playlist only, it displays the top sites page and does not open my favorites and reading list, as it used to.

  Can someone tell me how to access my bookmarks and playlist in the Sierra? I'm sure it's something in the settings or something escapes me. My Bookmark Bar is the top of the page, yet. I can't find my bookmarks and reading list.

  Thank you

  I thought about it, I had to go to Favorites on top and tell Safari to display in the Sidebar again.