Behavior of cooling after only the BIOS Flash - Satellite Pro A300

Similar Questions

• Problems after updating the BIOS on Satellite Pro P200

  I recently buy a Satellite Pro P200 running Windows Vista Business. Yesterday, I updated the BIOS to the version 1.50 supplied with the machine to 1.80 available on the Toshiba site. I double checked that I was using BIOS correct update for the Pro P200 Satellitel running Vista.

  After updating the BIOS, I have now two problems:

  1. whenever I start and join the office, I get an error message "record of Vista has stopped working". This problem has been identified as toshibavistaregistration.exe here: [link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99805]

  2 Control Panel > system now shows the processor and the memory (RAM) as "not available". Execution of the diagnostic PC Toshoba tool and looking at basic information show also no information on the memory (RAM) Although the processor information here. There may be pieces others missing too under the eyes of list shorter than before the update of the BIOS.

  Basically, I want to get everything working again as it should, but cannot find any information on these issues.

  After further review, it appears that the update of the BIOS is not the cause of the problems.

  Immediately after updating the BIOS, I had a major system crash. It turns out that this is what has caused problems.

  After a system restore to a point before the update of the BIOS and the major system crash, now everything is working again with BIOS version 1.8 in place.

• Re: How to disable the BIOS on Satellite Pro A300 - 1 2 pass?

  I have a Toshiba Satellite Pro A300 - 1 2, some how the BIOS got locked and a startup password has been enabled, I tried to get in the BIOS to disable the startup password but without any job.

  What I need to send or take it back to Toshiba to take them off for me?

  Thank you for your time.

  If the BIOS password does not work for you, you need professional help. Contact the nearest Toshiba service and they can remove it for you.

• Re: Unable to download the BIOS for Satellite Pro A300

  BIOS - 20090430112041.zip

  Why can't I download the update of the bios?

  does anyone else have this problem?

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=43184

  Looks like a server problem I think it should be solved in next time

• The update of the BIOS on Satellite Pro U400?

  I have a Toshiba Satellite Pro U400 (PSU41E) running Windows 7 x 64 and I try to update the BIOS to version 4.70 to 4.00.

  Whenever I try to do it from Windows using WinPhlash which comes with the download on the Toshiba site it seems to freeze when you try to Flash the new BIOS.
  I connected as the local administrator, tried to use other programs flash and even tried to do from a USB flash drive with no luck.

  Can someone please help me and explain how do I update the BIOS?

  Hello

  > tried to use other flash programs
  Never use other flash programs! In the worst case, you could damage the ROM module and then it must be replaced. Use only the program flash Toshiba that is tested and designed for laptop and the version of the BIOS.

  The update of the BIOS program is also designed for Windows, it s a Windows Update program.

  Satellite Pro U400 wasn t comes with Windows 7 so I guess you did your own installation. Value added package is required for the update of the BIOS program and can be downloaded on the European driver of Toshiba download page where is your laptop model:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Need version of the default BIOS for Satellite Pro A300

  Hello!

  Anyone know what is a default version of the BIOS in my Satellite pro A300 PSAGDE 1NT? I bought it in 2008. I found that an updated version of it on technical support, what is insyde 2.20 WIN.
  If anyone has the same previous type of BIOS, will it be possible to make a file of recovery for me? This me is already damaged and there is nothing I can do.

  Thank you!

  What do you mean with corrupt?
  What is the problem here?

• Cooling fan does not work on Satellite Pro A300

  Hello world

  I was asked by a friend to repair their Satellite Pro A300, because their CPU cooling fan had stopped working even during the start of the POST and the laptop could overheat and shutdown. So I thought it might one of three things:
  # Fan is obstructed by dust or dirt
  # Rolling fan failed
  # Fan power cable was loose

  So I disassembled the laptop and cleaned the fan/radiator with compressed air and check the connection of the supply, which was solid, but this does not solve the problem, so I replaced the fan and the heatsink with another that I knew worked from the same model laptop that had a motherboard fault due to the bug of password to start random bios (out of warranty) but still no joy.

  I'm starting to believe that the fan was perfectly fine rather motherboards temperature of the processor or the sensors that control the activation of the fan has failed.
  Am I correct in thinking that it is essentially, irreparable without specialized tools and my friend will be content themselves to turn the system off each hourish or is there something else I forget?

  Thanks for any help.

  Hello

  I m not a technician, but for me, looks like the fan connector is working properly if you already replaced the fan and therefore, it would be necessary to replace the motherboard

  That s all I can say about it having a look for second mainboard or laptop where you can get a motherboard cheap. Maybe it works. :)

• USB no longer works after that the BIOS flash to ABCN74WW on the new Z70-80

  Hello

  I started with the installation of Windows 7 on my brand new Z70-80 which worked well, worked USB 2.0 ports.

  After flash BIOS to ABCN74WW USB ports do not work any longer. I already tried soft reset BIOS by unplugging the power supply and the battery by pressing the power button for 20 seconds. USB ports are still inaccessible after that, a USB flashes for a moment, mouse LED is lit but no laser and no operation at all. Even when I start any new installation of windows.

  Is it of any known issues with this version of BIOS? Can I cancel the flash BIOS?

  Kind regards

  I do not remember on an option to backup the bios and certainly did not do. In any case, the upgrade from windows to 8.1 solved my problem...

• Error after upgrading the BIOS on Satellite A200 (PSAE0)

  My Notebook: Satellite A200 (PSAE0) with Windows Vista.

  When I try to update with the utility setup.exe (BIOS version 1.80 - WIN, compatible for portable computers with Windows
  Vista!), it goes all the way to new BIOS then the machine is blocked, collapsed.

  I have to remove the battery to turn off the power of the machine to restart. But the does'n system start and does' screen n

  turn it on...

  Can anyone help please?

  > Did you know BIOS is fixed on the motherboard?
  Not the BIOS is fixed on the motherboard, but the ROM module is fixed on the Board!

  Please don t try to correct yourself because you can really damage the jury!
  And as you've probably experienced the motherboard is one on the most expensive laptop parts.
  Notepad allows you to checked by a technician with experience of the computer laptop and don't try any dangerous experiences it s not worth!

• How can I "downgrade" the BIOS on Satellite Pro P100 - 160 (PSPAE)

  I have just flashed the BIOS on my Satellite Pro P100 4.8.

  The CPU runs at 100%. (90% + for windows explore)

  Only a single core is recognized by my Vista gadget.

  85 CPU temperature

  How can I "downgrade" the BIOS? Where are the older versions?

  When the new BIOS version is available to download older versions are not available more.
  What Satellite Pro P100 you exactly (model name, model number)?

• Re: How to access the BIOS on Satellite Pro A120

  Can someone tell me how to access the BIOS on my SAT Pro A120?

  Hello

  You must press ESC and then F1 key immediately after the laptop has been powered!

  The laptop seems to be to use the Toshiba BIOS and ESC key should be the right one!

  Good bye

• Serial number rubbed off after only 4 days on Satellite Pro L

  I would like to express my shock that important information on the back of my laptop almost completely rubbed off after only four days of use, Inc. serial number, model number, voltage/ampage, etc.. I bought a toshiba laptop on the premise that their laptops were reliable compared to the rest. It bodes not well when something as simple as a series rubs number turned off after such a short time.

  At a point, this information is important for situations of warranty/returns? I hope not. However, even if not, is there anywhere else on the laptop where this information is displayed?

  Thanks for any help.

  Hello

  First of all the series (series of windows key) which is placed at the bottom of the unit is an OEM key. You cannot use it in relation to other OS.
  The OS from Toshiba is already enabled and therefore the serial key is not necessary for you.

  The serial number of the laptop is also placed at the bottom of the unit.
  And as suggested by Feliks portable low s side doesn't touch the table at all. So it cannot be rubbed. What can happen if you carry the laptop in the laptop bag or where the bottom of portable computers would be rubbing against the surface of the bag.
  Perhaps you could ensure the label using a tape or similar

  See you soon

• How to access the BIOS on Satellite Pro 4600 settings?

  Guys,

  I received a Satellite Pro 4600, unfortunately this laptop has 2 and a half proceeding on this issue. The first is MS2000, then XP then an incomplete installation of XP. When I start the laptop, it asks which OS I want to use. I have a legal copy of XP that I bought and I want to reformat the computer laptop and put on a new install of XP, the problem is how to enter the BIOS to change the settings to boot to a CD?

  Any help is greatly appreciated.

  Steve

  Hello

  First of all you n t need to access the BIOS to boot from the CD.
  You can simply press the F12 key immediately after the laptop has been powered.
  It would show the available boot options.

  Alternatively, you can press the C button that would automatically allow the CD/DVD drive as the boot source.

• How to access the BIOS on Satellite Pro A120

  Sorry for my English.
  But I need help:

  How to access the BIOS on my Satellite Pro A120

  Hello

  If I m not wrong not the Satellite ProA120 is supported by the Toshiba BIOS and so you should be able to access the BIOS pressing the * ESC * key immediately after starting the laptop

• How to access the BIOS on Satellite Pro 440CDT

  I want to see the system BIOS on my laptop, but touch that is it for?

  I'm trying with keys: Del, F1, F10, F2 ', ' but nothing happened!

  Sorry with my English.

  I put t know what BIOS was preinstalled on this very old unit but usually you have to press ESC then F1 immediately after starting the laptop. This will not work if the device uses the Toshiba BIOS.

  But if Phoenix BIOS has been installed you have to press F2 to enter the system BIOS