Behavior of locking/unlocking of VISA

Similar Questions

• I get a message on my watch "Device locked" Unlock iPhone to start using Apple Watch "so I have the odd from my iPhone, now I can't pair it again.

  I get a message on my watch "Device locked" Unlock iPhone to start using Apple Watch "so I have the odd from my iPhone, now I can't pair it again.

  Hello

  Follow these steps to clear your locked watch and re-pair it with your iPhone:

  • Connect your watch to its charging cable - with power connected.
  • Hold down the side button until you see the cursor off the power.
  • Press firmly (IE more firmly than usual) on Power Off and then press erase content and settings.
  • Then re-pair your watch by using the app shows on your iPhone, choose restore backup when the possibility.

  More information:

  Set up your Apple Watch - Apple Support

  If you have forgotten the password for your Apple Watch - Apple Support

• iPad locking/unlocking function of Pro

  I have an iPad Pro when I go into settings > general, the Lock/Unlock function is not here, but I have this function in my iPad Air. Please help how I can get this problem resolved?

  See previous discussion: there is no option to lock/unlock in setting/General in my new iPad 9.7 pro. How to obtain?

• It has no lock/unlock option in setting/General in my new iPad 9.7 pro. How to get it?

  My new Ipad 9.7 pro has no "lock/unlock" option in Settings / General of the uptodate 9.3.1 iOS.

  How can I solve this problem?

  Petch

  You have coverage chip on your iPad?

• Windows 10 - FN button and touchpad lock/unlock button problem Satellite L675-11J

  Hello
  I have a Toshiba Satellite L675-11J and 10, lock/unlock FN key touchpad button do not work after upgrading to windows.
  Help, please!
  Best regards

  Fn keys require special Toshiba software that controls this feature for laptop.

  But Windows 10 drivers are not published for this series of Satellite L675 because is not win 10 supported.

  From my point of few, this means you can use Notepad as part of Win 10 but without the keys FN function.

• Locking/unlocking function of rotation does not

  After the last update of my a6000 of lenovo for the function of locking/unlocking lolipop 5.0.2 rotation does not. Even when I get a call phone screen does not turn on either. While many features like WiFi reception & battery draining improved. Rotation function auto fix kindly & call receive screen time on the service in the next update of emergency

  After a few resets, the problem is solved

• My touchpad lock / unlock does not work

  My touchpad lock / unlock does not work I am on windows 7 and I have hp 2000-2d04se, I tried to install different drivers, but I can't find the settings for locking and unlocking. I also tried to search the website and Q & A different but I coudnt solve the problem. Help, please.

  Hello

  I finally found the solution. I downloaded a different version of synaptics and it worked it is SP61030 I found it on the hp website. Its version is 16.3.9.0. Finally

  Thanks for trying to help

  Kind regards

• How to stop pop up "OSD MAIN CONTROLS LOCKED/UNLOCKED.

  How can I stop a pop up signal coming just in the middle of my screen and says "OSD MAIN CONTROLS LOCKED/UNLOCKED.

  Problems with OSD (menu appears and disappears at random or flashes "locked and unlocked" on and off - or other defects) are caused by the buttons themselves.
  These monitors (especially Philips) use poor quality buttons that after 2 or 3 years wear out and go semi short circuit. You can measure them with a meter.
  The permanent solution would be to replace the button (open the monitor, the solder then resolder) - A faster / less accurate fix would be to simply pull on the cable to the Panel of buttons inside and again without controls in total-, involving the opening of the monitor.
  You can still use the monitor without these buttons, automatic aid and outside.

• Fingerpad of HP G72 lock/unlock

  I tried everything, but I can't seem to find how lock/unlock the pad of the finger. I'm in College and when I type, the Palm of my hand touches the fingerpad and the cursor will move to another part of my book and it is too difficult to type on my laptop.

  You can try the following steps to disable or enable the touchpad and see if that solves the problem:
  1. on your keyboard, look for a function key that has an icon of a touchpad. The icon usually resembles a large rectangle with two small rectangles below.
  2. Once you find the key with an icon of touchpad on it, hold down the function key (usually located in the box at the bottom left of the keyboard and can display characters Fn on it) on your keyboard and simultaneously press the key that has touchpad on it icon. If the problem persists, again hold the function (Fn) key and press twice the key function (which shows the touchpad icon).

  If the problem persists, you can consult the following link for some options more troubleshooting:
  http://www.ehow.com/how_6787620_unlock-touchpad-laptops.html

  Hope this will help you.

• Options of locking/unlocking of blackBerry Smartphones

  Maiden Post. Be gentle with me!

  I'm here on behalf of a friend (he delivers my meds, so we can say that it saves my life), who inherited a BlackBerry Bold 9700 (I think) of his son. His son insisted on his setting a password (wise), but there now to unlock almost every time he uses it.

  Is it possible to be asked for the password to the market, but not after that?

  What are the choices are available? I skimmed the manual, but it doesn't seem to be much choice lock/unlock.

  I saw 'Do call during the locking' but yesterday he wanted to add a phone number to contacts, and this requires a password.

  We're both diminishes us in our 60s and on our stage, the need for security against ease of use...

  Hi Swiftie,

  Welcome to BlackBerry community support fourms.

  By default there is no option to set the password to powered only device. However, you can consider using 3rd party device app lock/unlock for this purpose.

  Alternatively, you can try activation request PIN SIM that will require you on powered only.

• Error: "the drive where windows is installed is locked, unlock the drive and try again" while trying to regenerate the system

  My daughters Toshiba S955-S5373 went all green, she says while she helped the battery out. I didn't know she was in trouble. We tried to solve; However, Bad_system_config_info appears before diagnosing and resolving problems. After 4 hours, nothing has been resolved.

  I found the DVD we created initially and attempted to load that. We shut down the laptop with the power and reverse holding F12 button. I tried to boot from the DVD, but it does not read the DVD and just crossed the initially to start and diagnose and solve problems. I have waited 2 hours, but without success.

  I turned off again and I just tried to refresh the PC. He said "the drive where windows is installed is locked, unlock the drive and try again".

  I then tried auto repair but could repair. Log file C:\Windows\System32\Logfiles\Srt\SrtTrao;/txt appeared.

  I even tried to reset the PC as a last resort. But the message failed to reset the PC required A disk partition is missing.

  Don't know what I can do. Can you help us?

  Original title: Toshiba S955-S5373 will not start

  Hi Annaed,

  Thanks for posting your query in Microsoft Community.

  I can understand your concerns to your system and will certainly guide you in the right direction to solve the problem.

  Control bug BAD_SYSTEM_CONFIG_INFO occurs if the SYSTEM registry hive is damaged. However, this corruption is generally unlikely, because the bootloader, known as NT Loader (NTLDR) in versions of Windows prior to Vista, checks a hive for corruption when loading the hive.

  This bug check can also occur if some values and critical registry keys are missing. You keys and values may be absent, if a user manually change the registry.

  As per the error message "the drive where windows is installed is locked, unlock the drive and try again", I would refer to the suggestions posted by phanlon7 replied on 12 October 2013 in the next thread and check if they are useful.

  Windows crash hard drive - discount - locked, unlock the hard drive

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• After effects layer properties Auto expands when I click Hide, Unhide, Lock, Unlock

  The title pretty much says all of this, I tried to search if this has been discussed before but no could not find anything.

  I'm on the latest version after effects CC, 13.8.1.38.

  This ONLY happens when the composition I work has enough layers to display the vertical scroll bar (which means that the number of layers exceed the size of the size of screen/composition). If I click Hide/Show or lock/unlock on any layer, it automatically increases its content makes life very irritating because I have to close it manually each time. If I increase the size of the composition window Panel so that all layers are visible (i.e. no vertical scroll bar) so it no longer occurs. So the key to triggering it is to ensure there are more layers than your screen has space to show in this Panel.

  I've looked everywhere in the settings and couldn't find something to turn it off. I know that the fastest solution is to keep the composition and store the number of layer, but it is not always possible for me that I must continue to work with items broken down in the same composition. My workflow would be more complicated if I continued to switch between the tabs before publication.

  All solutions would be highly appreciated I just can't work with this 'feature' useless. Thanks in advance!

  This is certainly NOT a feature is not that it is useless, it allows to work with layers of worse.

  Let's see if we are talking about the same thing. Here is a composition with multiple layers:

  

  I press the lock or hide and everything seems the same:

  

  so if we are talking about the same thing, there is something wrong with your software.

  try to reset the preferences Ctrl + Alt + press on the launch of the app you except that you please provide screenshots of before and after, and perhaps a video capture if you can and we will consider here.

• How to view locking/unlocking of the locations

  Hello
  I know how to lock/unlock the places, but I just want to know if there is a report where you can get to see that locked the locations at which time and things like that

  Hello

  Unfortunately there no report also canned. All reports that are available from Oracle are probably already in your application. If they are not; I would like to get from your application administrator to import XML that was distributed with the product reports.

  Since there is no such reports that will do what you want; a new may be made using one of the current reports of security as an outline.

  Thank you

• How to lock the drive of bit-locker unlocked instantly

  I am using Windows 7 ultimate and I do four partition which is bit locker impossible, my system sheared with my other friend and we using a single account login for quick start, because of which I could bit locker to keep stuff private and protected.

  My problem is that once I have unlock the bit locker drive to get the thing full use of them, so it is there no option to lock it again instantly to lock this i have save my work and restart the system again after it oneself.
  so please help me and give me the solution to lock my unlocked instantly drive.
  thanking you
  Akash deep gupta

  First thanks for answer

  but I found a solution which present on Microsoft support
  by using this command
  manage-bde-lock f:
  where "f" is active bit locker drive use this in cmd to copy into Notepad and change the extension from .txt to .bat format or keep on office or any where we want to and double click on then it run cmd and lock the drive
  I do this and it work for me instantly

• BlackBerry Smartphones BB Bold 9790 lock/unlock

  Hello

  I have a problem with my 9790 "BOLD" from BB. It's new sw v.7.1 2039

  I have lock the camera and after a few seconds, it will unlock by itself.

  Can someone help me? Is this a bug in the software or a bad configuration?

  Waiting for a response.

  Best regards

  Claudio

  Now it's work!

  There is an application that creates the problem.

  Thank you to