behavior of the cursor sq - lite

Similar Questions

• Strange behavior of the cursor to the row in the table

  Hello.

  I use JD Studio Edition Version 11.1.1.5.0 on Weblogic 11.1.1.5

  I have page JSPX in taskflow bounded to view history records in the table.

  DB table is simply with a single primary key and number of columns.

  On the page, I show only little of them (Date, user, Rec.Number and State).

  When I open this dialog box with records that hold these documents

  ID	Date	user	RecNumber	State
  67	02.01.07	User1	1	1
  68	02.01.07	User1	2	2
  69	02.01.07	User1	3	1
  70	02.01.07	User1	4	2
  71	02.01.07	User1	5	1
  72	02.01.07	User1	6	2

  I see highlighted records with status = 1. Click on any record highlighting disappears and when I try to move the cursor down through the cursor of the keyboard (arrow keys) Stoops (pressing "down") until that record 3rd then skip (press 'down' key) 2nd record and repeat this. When I try to move the top slider to 5th/4th then folder and back loop.

  When I leave the body of the table and click outside the table then highlighting appears again.

  If I show only records State = 1 then all records are highlighted and the cursor jumps between 2nd and 5th record.

  ADF table is created simply by dragging and dropping of DataControl with RowSelection simple =, rowBandingInterval = 0, filterVisible = "true".

  I can find no reason for this kind of behavior.

  Please help me understand what can be the reason of this madness.

  Thanks in advance

  I check the original Version and compare it with the last good version.

  I found at the end

  This section is missing from the right version

  I add

  and everything is fine now.

  The same problem was in an another PK VO. missing base table.

• Customization of the cursor to chart data

  All the:

  When you use the chart axis and time line, I want to customize the behavior of the cursor to chart data.  The default behavior is to display: series: temporary space group: 0042:10 October 2015 value: 30%.  See attachment.

  I wish I could control 12.1.3 JDeveloper/ADF.  I would like to see, say, time stamp: 0042:10 October 2015 temporary space: 30% for time series, group seems rather strange.

  Is there a way to do this?

  With respect,

  Deputy Richard

  I discovered with experimentation and community support, we can use shortDesc for this.

• Change the Image of the cursor in the Absence of a & lt; a & gt; Tag

  QUESTION: How do you get the cursor to change the passage of the mouse in the following context?
  
  \BEHAVIOR: When the cursor passes over the image, the image lightens. I want to change to indicate to the user that should be clicking on the slider.
  
  CODE in the < head > TAG
  
  < style type = "text/css" >
  IMG {}
  opacity: 0.8;
  }
  < / style >
  
  < script type = "text/javascript" >
  function openWindow() {}
  Window.Open ("someURL");
  }
  < /script >
  
  CODE < body > TAG
  
  < img src = "imageFile" width = "xxx" height = "yyy" alt = "imageFileName."
  onmouseover = "This.style.Opacity = 1"
  onmouseout = 'This.style.Opacity = 0.8'
  onclick = "openWindow ()" / > "
  
  Roddy

  Quote:
  Ah, I missed something. The reason why: visited is not working do not, is that use you JavaScript to open the external link. With a normal "href" attribute the: visited State would have an effect.

  No, you missed two things: there is also the problem of the arrangement of the CSS rules. Here you can compare the two sets of CSS rules and HTML files below.

  In any case, I am sure that this discussion has emerged, as I am now able to perform the desired task: control the cursor and ensure the good opacity. There is a hazard with insurance "good opacity", however: I run the risk of becoming a second David powers. Argh!

  ORDER OF THE APPROPRIATE RULE
  a: link {img
  opacity: 0.6;
  Filter:alpha(opacity=60);
  }
  a: visited img {}
  opacity: 0.2;
  Filter:alpha(opacity=40);
  }
  a: hover {img
  opacity: 1;
  Filter:alpha(opacity=100);
  }

  http://homepage.Mac.com/moogoonghwa/practice/CSS/cursorControl3.html

  ORDER OF THE INCORRECT RULE
  a: link {img
  opacity: 0.6;
  Filter:alpha(opacity=60);
  }
  a: hover {img
  opacity: 1;
  Filter:alpha(opacity=100);
  }
  a: visited img {}
  opacity: 0.2;
  Filter:alpha(opacity=40);
  }

  http://homepage.Mac.com/moogoonghwa/practice/CSS/cursorControl4.html

  Roddy

• Why new tabs do not place the cursor in the url as before?

  yesterday, I click New tab and the tab page comes up with the emphasis placed in the URL bar Highlighter and all I have to do is enter the address I want to search or go to
  Today, the focus ends up with the cursor at the end of the address in the URL bar... NOT GOOD!

  Hello, you can try to reproduce this behavior when you start firefox in safe mode, once? If not, perhaps an addon intrudes here...

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Erratic behavior of the keyboard of a Satellite R830

  I can't use my portatil to write because the keyboard has an erratic behavior. When you are writing it jumps to different positions on the line.

  No doubt, it can be solved install drivers again, but I'm not an expert, then someone can help with this.

  ARO

  Hello

  Disable Touchpad while writing and using the keyboard.
  I had the same problem in the past.
  Finally, I noticed that I touched the surface of touchpad accidentally while typing and this is the reason why the cursor jumped around.

• When opening new tab I'm headed to Google, but the cursor remains in the address bar. Anyway to automatically move the cursor to the google search bar?

  Thank you in advance. I upgraded to firefox 4, and since then, I had a problem. When you open a new tab, I chose to be directed on google.com. In the past my cursor automatically went to the search bar on this page when I open a new tab. After the upgrade, the cursor remains right in the address bar, but I would like it moves automatically into the bar of google search on the page. Does anyone know how to fix this? Thanks again.

  What extensions do you use?

  A new tab opens by default like a Virgin tab (topic: empty).
  
  If this isn't the case, then an extension has changed this behavior.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Since El CApitan, I have episodes when you sign in that the cursor becomes crazy and enters all kinds of letters.

  When connecting have had episodes where the password was caught by the repeated letters entered automatically, requires the computer to be closed and restarted. last night the computer began to make incredible noises as if a radio was playing. What is going on?

  There are several possible causes of this behavior. Please take each of the following steps that you have not already tried until it is resolved. Some may not apply in your case.

  1. follow the instructions provided in this support article, so this one, as appropriate. A damaged or defective power adapter could be the cause, even if it's the right kind.

  2 simultaneously press the four corners of the trackpad and release. If there is no effect, it is likely to be temporary, and in this case the device must be repaired or replaced.

  3. disconnect or turn off each Bluetooth or USB pointing device, one at a time, testing as you go. You may be able to identify one that is defective. By a pointing device "," I mean a device that moves the cursor, trackpad, mouse, trackball, or tablets. A regular keyboard isn't a pointing device. If you have a desktop without a built-in trackpad design, at least an external pointing device must be active at all times.

  4. If your model has an infrared receiver for use with an Apple Remote, turn off .

  5. start in safe mode and test, preferably without launching any third-party application. If you do not have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you cannot start in safe mode. If there is no difference in safe mode, continue to the next step.

  6 reset the system management controller.

  7. If you use a mouse or a trackpad, Bluetooth, investigate potential interference sources, including 3 USB devices.

  8. a swollen in a laptop battery can encroach on the trackpad underneath and cause erratic behavior. If you have trouble clicking the trackpad, it is probably the reason. The battery must be replaced without delay.

  9. a faulty device or a damaged cable can cause the built-in trackpad to a MacBook to behave erratically. If you use the wired devices, disconnect them one at the time and the test.

  10. There is also a report of movement erratic cursor caused by an external display that was plugged in but not turned on.

  11. If you use transfer, disable it in the general pane of system preferences.

  12. If the mirroring of airtime to a TV is turned on, turn it off.

  13. If none of the above apply, or if you have another reason to believe that your computer is remotely controlled, pull it out of the network by turning off Wi - Fi (or your Wi - Fi access point), disconnect a Bluetooth network connection, then unplug the Ethernet cable or a USB modem, whichever is applicable. If the movement of the cursor stops at the same time, you should suspect an intrusion.

  14. an appointment of 'Genius' in an Apple store to do the machine or the tested external trackpad.

• Behavior of the modified mice

  I have an Ideapad Y560 with a mouse Bluetooth Lenovo A - 300 M. Normally, when I click on a folder, the folder opens. When I place my cursor in Google, I am allowed to write. I can browse using my mouse.

  But today, everything 'glue' to my cursor.

  When I click on a folder, the folder stick (as I am dragging the file) to my cursor.

  If you go to Google and put my cursor in the search box, the url of the Web site 'glue' to my cursor and 'glue' in the search box.

  If I click on a white spot on my screen, the cursor created a blue indicated selection box that changes size when I move my cursor.

  I press 'ESC' to take off everything that is glued to my cursor. I have to click several times to close a window or make a selection on a Web page. For the most part, I can't use my mouse because it does not work properly.

  I have updated flash and run windows update. I restarted. I put new batteries in my mouse. I ran a virus check. I downloaded the latest driver of Lenovo mouse (from 2010!), but I get a message that my current driver is more current than to Lenovo. I deleted my mouse device and reinstalled. I changed browsers. I'm out of ideas.

  Help?

  It seems that your mouse broke down. Recently, I threw on a mouse who showed similar behavior. The problem is that the switch within the mouse gets stuck.

• is there a way to limit the cursor at the end of a line in the source code editor?

  In the source editor, the cursor will always follow where to click. But I want to restrict it at the end of a line, just like the other text editors don't. Y at - it an option or sth? I can't put up with it any longer.

  Hello morph!

  The source in the LabWindows/CVI environment Editor is built according to the concept of the virtual space.

  For the moment, in the current version of LabWindows/CVI, this is the default behavior, which cannot be changed in the Preferences Editor dialog boxes.

  Best regards

  -Johannes

• Execution of 'bringing to the Center' on a free cursor in a graph XY of the newspaper brings the cursor to the top edge of the graphic (instead of Center)

  Dear support,

  Dear users of LV,

  by selecting "make to the Center" for a free cursor in a XY graph has no
  Place the cursor in the center of the chart, but rather the order brings to the
  average/average value. This isn't a problem for a linear
  axis [due to the fact that the center of the axis is equal to]
  medium/medium value of the points on the axis end]. But when
  mapping of the axis is logarithmic, the cursor is found on top of the
  the screen. This is because the average value of the end tip
  ((min (y_axis) + max (y_axis)) / 2) does not match the center of the axle.

  What's the desired behavior, please?

  Example: For a y_axis = [1.100], to the highly anticipated pivot post would be
  10 and no to 50.5. The central position for the logarithmic mapping
  must be calculated as (log (min (y_axis)) + log (max (y_axis))) / 2, IMHO.

  Kind regards

  Lynn,

  It is certainly no bug. You can make a feature request.

  I can't climb this case. LabVIEW wants this behavior.

  It may be possible to program a work around with a property node.

  Richard

• TDMS write to the auto folder causes the flicker of the cursor

  I joined a project (8.6 LV) showing this problem.  When writing to a TDMS file in a folder of automatic settlement, the cursor briefly becomes a hourglass.  This behavior is not seen when a folder is not monitored by LabVIEW project through AutoFill.

  Run the VI.

  Toggle "Auto" true and wait 10 seconds to see flicker.

  Toggle the 'automatic' to False and flicker settlement stops.

  -Jason

  Hi Kyle,.

  In the forum you referenced, issue of mvickerman on the flicker of the cursor centered around closing and rinsing of a file.  The real cause is that the file operations are conducted on a file that resides in the LabVIEW project folder was auto.  I started a new thread to document the question more directly where others see a similar problem (writing to a file and see a flicker of the cursor).

  If the flicker that bothers someone, during development, they can stop automatic settlement on the record with the data file or manually include the data at the root of the project file.  Despite what says the solution on this forum, the problem doesn't seem to be the data file being simply in the project, but in a case of automatic settlement.

  As I said there:

  «For the record, I always choose to use automatic settlement files.»  I built the demonstration project to prove to myself that automatic settlement of records caused the problem.  Like most, we build applications (exe) for the customers, and data files are not in the hierarchy of development.  Besides, the customer have usually the LabVIEW project open if they have LabVIEW at all.

  Thus, the problem with deployment. »

  Take care

  Jason

• Distinguish between the cursors in a Structure of the event

  I have a XY Chart on the front of my Panal with 2 active cursors. I've also enabled Anotation. Anyway is to distinguish between the imprecateurs in a single structure. Currently, when all the sliders are moved structures even fires.

  Thank you

  Unless you have been bitten by this behavior, do not realize that the TWO sliders and annotations will movement of cursor events fire.  CursIdx will return the index cursor or annotation.  A workaround, it is that the cursor type? event fires only to win the real cursor, so I add a shift register and a real constant on the cursor Grab the wire? event.  In which case the cursor to move, I can use the Boolean value to determine whether it is #CursIdx or #CursIdx that is moved cursor annotation.

  

• Weird behavior of the computer

  Windows XP SP 3
  I wake my computer from sleep mode.
  Wallpaper is slowly deteriorating with a solid color.
  I opened all the windows display little data that it was supposed to-text, input, buttons.  The caused cursor sometimes given to this place to display the cursor was hovering.
  Whenever I open a drop-down menu, the computer sounded like an old phone.
  Make an entry to a window sometimes caused the program to lock up.
  The foregoing was also true for the Windows Task Manager.
  I was unable to restart, then I shut it off and turn it back on.  Same behavior.  Finally I was able to reboot and everything was back to normal.  But then it happened again.  Restart - back to normal.
  This seems to be the odd behavior of Nastyware, but I did some scans (MalwareBytes and Avast) which are things, but I don't know what to do with them other than quarantine.

  I can go back to a System Restore Point, but I would like to know what is happening.
  If the technicians have thoughts please let me know.

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        What are infections you found on the system?

  I suggest that you can run an online virus and malware scan and check the infected files if they are part of a program or toolbars installed on the system etc if it is related to a program, so I suggest you to uninstall the program from the system and check if the problem persists.

  http://OneCare.live.com/site/en-us/default.htm

  As you mentioned in the question, you can also do a system restore to the previous point, when the system worked very well and see if the problem is resolved. I suggest you follow the steps mentioned in the article given below to do a system restore.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Apart from that, I suggest you to download and install Microsoft Security Essentials on the system in order to maintain your system against viruses and other threats. It is easy to install and is free of cost. Click on the link mentioned below for more details.

  http://www.Microsoft.com/securityessentials

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you move the cursor, rather than move, the police often changes a size big or too small to see.

  Original title: "when I try to move the cursor, instead of move, the font size often changes to a huge size or one size too small to see. In addition, it can jump to the top or the bottom of the page. »

  More I use Vista, more I hate it!

  It came pre-loaded on my Fujitsu Lifebook. I had heard talk were many complaints about Vista and I wanted to stay with XP or Windows 7.  Each manufacturer of the laptop has been unfortunately Vista preinstallation.

  • When I use the word processor Works Windows, sometimes without warning he automatically becomes italic police without any input from me.
  • If on Windows works WP or on any page of e-mail online, when I starts to move the cursor, a little 'target' - as the icon appears when the cursor was and, either changes in font size of microscopic or 500% or more.
  • On the Internet page of wole can shrink or get huge.
  • At other times, with one touch of the mouse or touchpad, rather than the font change, the cursor may disobey my entry and the end to the top at the bottom of a page where I won't be, or somewhere else. When I get back to the expected location, it can repeat the same action three or four consecutive times before to behave normally again.  This makes typing manuscripts or very frustrating messages sometimes, not to mention a lot of lost time.
  • When you try to type copy from a printed script, if I don't keep control of the screen I can finish with margins stange, italic where they belong or phrases that are moved where they belong.
  • Sometimes when I'm trying the high - lite a word or phrase so I can drag it to another location, it will refuse to high light, making necessary use rear brace to delete the words I want to drag and retype the words to the new desired location.
  • Another problem is that the will of cursor down stubornly and turn several times since the location of the Center to the extreme side so that the rest of the page is covered.  Vista seems to have a mind of your own.

  This set of problems seems to migrate from MS Word to MS Works, Web pages, and e-mail message composition.  I thought it was the new computer initially. I even returned it to Fry's electronics for maintenance two times.  I mean, they just excanged for another new Fujitsu Notebook.  When I got home, the replacement computer have behaved in the same way, which indicates that it's the software, not the hardware.

  Funny thing - now that I complain on this topic in this forum and have written this much, it doesn't have behaved badly again!  The ghost of Vista must have been scared and went into hiding.  ;-)

  Yet once more I use Vista, more I hate it!  -especially since I was in the middle of writing a book for publication.  In light of the frustration and the loss of my precious time because of these persistent bugs in recent months, I wish MS would trade my copy of Vista for Windows 7.  MS seems to be getting a reputation for releasing Beta quality software and call it a finished product.  You would think that MS wakes up to the fact that consumers expect to have for their money.  Everyone has the same problems?

  Are there realistic solutions out there?    Hmm, no spell no checker on this page.  Sorry for the typos. :-)

  You can get in trouble with your mouse device drivers, firmware and/or software.  This may be due to a Microsoft Update or any number of things (and could have happened to these two machines, if you did the same thing in both cases).  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should get for your mouse at the very least and I consider the keyboard as well and make sure they are compatible with your device, and your version of Vista) and all you have time to do - they can help way beyond simply solve this problem) leave the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  Also, your mouse may have the functionaality to change the font sizes and jump from one end of the screen to another by doing some things.  Read the user manual and/or research through start / Control Panel / mouse to see if this is the case and if so, it may be able to be disabled.  The problem with some of these "features are that if you don't know about them they can cause difficulties when they activate for apparently no cause when you actually not what caused the feature must be enabled." It took me a while to realize the CTRL-0 would change my IE screen at 100% size and I first thought there was something wrong until I discovered the problem by chance.  I say that, because the odds of two computers with the same exact defect are astronomical - it looks more like a problem as described above or a certain type of function you are unaware of (perhaps in combination with a keyboard input that is why I suggested that you update those as well).

  I hope this helps.  If not, I am sorry to say that your best option would be to go back again to see if they can reproduce the problem (you use your way computer in case it is something you do) and either repair or replace again (or change to another computer entirely).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.