Behavior of the modified mice

I have an Ideapad Y560 with a mouse Bluetooth Lenovo A - 300 M. Normally, when I click on a folder, the folder opens. When I place my cursor in Google, I am allowed to write. I can browse using my mouse.

But today, everything 'glue' to my cursor.

When I click on a folder, the folder stick (as I am dragging the file) to my cursor.

If you go to Google and put my cursor in the search box, the url of the Web site 'glue' to my cursor and 'glue' in the search box.

If I click on a white spot on my screen, the cursor created a blue indicated selection box that changes size when I move my cursor.

I press 'ESC' to take off everything that is glued to my cursor. I have to click several times to close a window or make a selection on a Web page. For the most part, I can't use my mouse because it does not work properly.

I have updated flash and run windows update. I restarted. I put new batteries in my mouse. I ran a virus check. I downloaded the latest driver of Lenovo mouse (from 2010!), but I get a message that my current driver is more current than to Lenovo. I deleted my mouse device and reinstalled. I changed browsers. I'm out of ideas.

Help?

It seems that your mouse broke down. Recently, I threw on a mouse who showed similar behavior. The problem is that the switch within the mouse gets stuck.

Tags: Lenovo Notebooks

Similar Questions

  • Behavior of the open browser windows

    Using the behavior of the browser window open I the following problem:

    A parent-page with inch-images (of articles) I open a PHP window with a larger image over the text of the info:

    onclick = "MM_openBrWindow (' display.php article?)" Article_ID = KNO024 ',' default ',' width = 550, height is 570')"

    The window opens fine, no problem.

    However in the process of opening a second article:

    onclick = "MM_openBrWindow (' display.php article?)" Article_ID = KNO020 ',' default ',' width = 550, height is 570')"

    stays of window is now open behind the parent page. I use the same window name ("default"), because I want to avoid multiple browser windows open. So, Yes, there is an additional browser window open, but unfortunately it is now behind the parent page

    Y at - it an option to get this window always ahead?

    You could do this - in the page that opens with the larger image, modify the body of this - tag

    on this subject.

    This will cause this window subordinated closing anytime, he is sent behind another window to foreground.

  • Previews are always created for the modified pictures.

    All of a sudden, after the last update, iCloud, sharing photos and iCloud photo library Photos on my Mac do not work properly. I've added 264 pictures of Photos on my Mac six hours ago, and these photos appear not in the Photos on my iPhone 5 and iPad 2 Air. In addition, whenever I try to stop the Photos on my Mac, I get a message that says that "insights are always created for modified pictures.» f you are now leaving, some glimpses of the modified pictures will not download to iCloud photo library and changes won't be visible on other devices or in other applications that Photos can create previews." There is a circle at the top of the photo page which is no doubt for previews being created, but nothing happened there for more than six hours. It's an empty circle. HELP please.

    Do you have enough free storage on your Mac to store additional excerpts?

    . I've added 264 pictures of Photos on my Mac 6 hours ago

    What is the format of these photos? They are JPEG files or another format? You also add videos? Sometimes the videos can not be processed and block the download.

    I would try the following:

    • Export the latest library of Photos to a folder on the desktop.
    • Remove the photo library (and empty the recently deleted album).
    • Restart the Mac.
    • Then add photos to Photos, but open them in the preview to check, if they open correctly, before you import them back. And only a little at a time, if you can identify the photo issues.

    Photos can now be treated, or Photos still hang?

  • Go back to the previous behavior in the address bar

    Just upgraded to Firefox 31.2 and I find that the new behavior of the address bar is in conflict with how I work. I often copy / paste URL, I type directly into the address bar, I use a current to go to about.config tab and none of these work. I found a reference to the evolution of the gfx.xrender.enabled false, but this did not help. Clues on how to revert to the old behavior?

    It's about: config with a colon...

  • Behavior of the filter action "stop filter execution.

    What is the intended behavior of the filter action "stop filter execution"? I can't find any recent documentation on this issue. When part of the filters manually execution, "Stop filter execution" is intended to stop all other filters for all messages if the filter that contains both matches? This seems to be the behavior for me. When included in the first several filters filter, only the first filter matches and the log only shows instances of correspondence of the first filter, although several other subsequent filters must correspond to several messages that don't match not the first filter.

    I appreciate the functionality of Thunderbird filters, but I try to find a solution to implement more complex logical Boolean to move messages from my Inbox with the help of manually run filters. I have several filters put in place to classify the messages, but I want to implement filters such that they are not applied to tracked messages. Currently I have the logic in most filters do not match a favorite message using the option 'Match all the following', however this prevents the use of the logic of the GOLD in the filter and led to an increase in the number of filters. I want to set up the filters as a first filter messages from games played and prevents other filters running only for messages that match the filter first.

    Maybe the behavior I see is a bug specific to my system, but I would like to get a confirmation on the expected behavior and see if others have encountered this problem. I work under the assumption that the behavior of "Stop filter execution" must stop subsequent treatment only for messages on which a filter containing is as indicated in the old post to https://groups.google.com/forum/#! topic/mozilla.feedback.thunderbird.prerelease/rUXaQ0NdZvM, but this assumption may be wrong.

    Any help or suggestions are appreciated.

    OK, it seems that this is a bug documented, for example to https://bugzilla.mozilla.org/show_bug.cgi?id=552936. I should have searched for bug reports before posting here. I follow things with bug reports. Thank you.

  • I get a strange behavior of the bar tabs and the address bar in Firefox 29,0 for Mac.

    I just installed Firefox 29,0 for Mac.
    I have a strange behavior of the bar tabs and the address bar with this new version.
    Instead of the address bar, I get two rows of symbols. And it is impossible to write anything in the address bar.
    (I add a screenshot, but I can't find a way to do it).

    Firefox has an RSS icon in the palette of the toolbar that you can drag a toolbar (but not on the location bar container).

    • Firefox menu button > Options/Preferences > toolbars
    • View > toolbars > customize
  • Can I use automator to change the modified time of a file as its content?

    I use automator to rename a series of images.

    The problem is whenever I change a change of time of amending records file.

    Can I use automator to change the modified time of a file as its content?

    I know that I can use the Terminal to change a date but I have no idea how to do to automate this process

    As you say you know the command to use in the Terminal, and then with Automator, use the Action run the Shell Script after the name change.  The new file name will be passed to the Action run a Shell Script, and from there, you can use touch - r to set the time of the file at the time the name of the new file

  • FF13 different behavior on the two machines home page

    FF gives different results than "Home Page" on both machines.

    On the desktop, I get my set (the former google/firefox one) homepage.

    On laptop, I have two tabs, the first of about: at home, the second is my fixed home page (the same old google/firefox one).

    On the desktop when I press home, page becomes whole-home page.

    On laptop when I press home, new tab is launched to give me my whole-home page.

    The behavior on the desktop is what I expect and what I want. Which continues with Notepad and how do I do the same thing as the Office?

    Check your settings on the laptop home page, you have inadvertently defined two pages as your home page...

    See - How to set the home page

  • change in behavior of the button home and end

    Hello
    I have a problem with the behavior of the home, end, PG. PREC, PG. next and arrow keys. After that I have upgraded to version 6, they do not work as expected.
    I disabled each extension and the behavior is always the same...

    They work as intended in IE8.

    I hope someone has a solution.

    Make sure that NUMLOCK is not engaged, as the keys Home, End, PgUp and PgDn are often superimposed on the numeric keypad. There should be fire of keyboard for Numlock.

    Press F7 to activate the navigation with the keyboard on or off, you want it out. Test after changing.

    To reduce the problems of caret navigation, see

    http://dmcritchie.MVPs.org/Firefox/Firefox-problems.htm#caret
  • Portege R500-11Z: how to use the external mic and hear the internal speakers

    We have a Portege R500-11Z running XP and want to use Skype with an external table microphone and the internal speakers.

    When connect us the microphone to the Jack MIC the Portege, built-in speakers cut out!

    How to use an external mic and still hear the internal speakers?

    Hello

    > When connect us the microphone on the Portege, built-in speaker MIC Jack cut!
    Are you sure you used the microphone port and no headphone port?

    Have you checked your settings Audio from Skype?
    There is an option called ring through the speaker too or something like that.

    Please also check the Realtek HD audio Manager in Control Panel.
    There is a tab called Audio i/o.

    Usually, you can change the connector settings, by clicking on the small key-tool icon.
    Disable the option called Mute rear output when plugged headphones before

    As you can see is called headset and not so I m confused a little bit why the speakers are turned off when you connect an external microphone.

    By the way; There is also a tab called micro.
    Check if the two options that reduce the echo and noise are OFF

  • Re: Portege M800: driver WebCam does not support the internal mic on the 64 bit OS

    Hi all!

    I have the problem that the internal mic in the webcam (Chicony) does not work in 64-bit (Vista or Windows7).
    Does anyone have a solution for this?

    Best regards
    Sven

    Hello

    How did you test it?
    Have you checked the settings in the software assistant webcam?

  • Unexpected behavior with the Option "record in the result.

    Hello

    I have unexpected behavior with the Option "record in the result.

    I have a few steps in the subsequence 'X', this subsequence passes a Boolean parameter. According to the value of the parameter I change the "Recorgind results" Option to report it or not. The thing is that if 'result Recorgind' set at race time I modofy by changing the value of Step.ResultRecordingOption to "Enable" and "Disable", the step is not reported until the same sous-suite 'X' is called for the second time (without changing the parameter passed).

    For example: (Preconditon: result Recorgind Option of all value sous-suite x are defined as Disable)

    1 CallSubsequenceX(Parameter: Enable)

    2 CallSubsequenceX(Parameter: Enable)

    3 CallSubsequenceX(Parameter: Disable)

    4 CallSubsequenceX(Parameter: Disable)

    Expected result:

    1. measures have been reported.

    2. measures have been reported.

    3. measures have not been reported.

    4. measures have not been reported.

    Result:

    1. measures would not same value Step.ResultRecordingOption has been changed to 'enable '. (Not Ok)

    2. measures have been reported. (Ok)

    3. measures reported same value Step.ResultRecordingOption has been changed to 'disable '. (Not Ok)

    4. measures have not been reported. (Ok)

    I use TestStand 2013 (5.1.0.226)

    Thanks in advance.

    -Josymar.

    Hi josymar_guzman,

    I just review the sequence and indeed we´re experience unexpected behavior with the Step.ResultRecordingOption callback. By a reason when you run the callback in the expression before each step section, the statement runs only until the next sequence is called, which is not what we want.

    To avoid this, you can place a statement before each step of the sequence, so you can change the State of the Option "record result" for the sequence running (and it is only the following). You can try something like this

    where the expression of the statement will be the recall "RunState.NextStep.ResultRecordingOption is YourCondition". With this, we guarantee that the results of the next step will be saved or not. I also remove the expression in the expression prior to each step section, because the condition is now on the statement before each step.

    I tried and it works fine. I´ll set the sequence that you share with me, with the changes. I hope this will help you and solve your problem.

  • Strange behavior of the WHILE loop

    Dear experts LabVIEW

    I would ask you to give me an explanation of the behavior of the very simple VI as an attachment. This VI contains a WHILE loop with three parameters, input and STEP. The table of RESULTS shows the calculated values. Considering the input parameters OF = 0 TO = 1 LEVEL = 0.1, then the RESULTS table contains the values 0, 0.1, 0.2,..., 0.9, 1. Considering the input settings ON = 1, TO = 2, STEP = 0.1, then RESULT table contains values 1, 1.1, 1.2,..., 1.8, 1.9. The question is, why the number 2 is missing?  (I also tried to use different types of data, but without success). Thanks for your thoughts.

    Juraj

    Because you compare floating point numbers.

    For example, 0.1 cannot be represented in exactly in binary, cela repetitive additions probably will not end in an exact integer later.

    Since the three entries, you can calculate the number of values exactly and use a loop FOR. Do not use the convoluted code...

    Why not just use ramp model?

  • PCI-6221 behavior off the power

    Hello

    A card PCI-6221, tension of the PC is out of snap-ins:

    When I inject a voltage (5V) input ana on the map, this tension is copied on the other analogue channels.

    Room I turn on the PC, and 6s after, injected tension is more copied on the other tracks of ana.

    What is the normal behavior of the map?

    Thank you pour your answers

    Hello Cedric,

    The behavior of the card when it is turned off is not defined. What is it you have a problem in your application?

    When you area PC, this one seems to provide power to the bus PCI 6 seconds after it starts, which explains why the map then adopts its operation.

    The best advice I can give you is to respect the configuration/connection of analog input (manual page 58 Chapter 4-14 M-series cards). About the card, if it works properly when the PC is turned on, and that the connection am well the guide, there is every reason to be reassured.

    I wish you a good day,

    Marc-Junior

  • Strange behavior of the browser blocks SQLDEV DM

    Hello

    I feel some strange behaviors in the browser of Datamodeler.

    After the opening of my model

    I have doubleclick in the window of the browser to fetch a few properties of the index:

    Drawings and models > MyModel > relational models > my RelModel > models > Oracle Database 10g > Tables

    So far, everything that happens.

    -I can select the tables and

    -doubleclicking shows the properties of the table.

    -I can scroll vertically

    -Select other tables

    -open and close the subtree of this physical tables

    Now, as soon as I click on any 'more' in the physical tables (for example, the index node or node of the plate) the browser "tri-de gel".

    The tree is distorted, scrolling seems erratic and it is impossible to select. Most of the time the main menu is also distorted.

    If I make the browser window, most of the time I'm able to hit the "file > save" from the menu. The model seems to be registered properly.

    No damage seems to have been done to the template on the reopening

    I'm on Windows 8 pro with the 64-bit version of datamodeler version 4.1.2.895 (from datamodeler - x 64 - 4.1.2 - 895.zip)

    Any ideas anyone?

    any response greatly appreciated.

    concerning

    Wouter

    Hi Wouter,

    I'm sorry, this is a bug and we are preparing a new version with this bug fixed.

    If I make the browser window, most of the time I'm able to hit the "file > save.

    Close the Data Modeler (X - close button in the upper right corner) and it will ask to save the drawing it is changed.

    Philippe

Maybe you are looking for

  • Do not load, stop, "update needed"

    Hello My MBP early 2011 has been acting for the past two days. He started does not load, the LED does not illuminate, and the computer would not recognize to be plugged. Then he started closing in the medium used. He did twice in the last hour. When

  • IE8

    is there a way not to install or hide ie8, because when I try to use my online banking I can't enter my account and I'm not sure if I will have problems with other sites that I pay bills online

  • Maximum thickness of CPL on II USM 16-35

    Hello I'm about to buy a 16-35mm USM II lens for 6 d body and I wanted to know what is the CPL filter thickness recommended maximum to avoid vignetting .7mm can be thick? Thank you

  • Cannot remove the virus XP Total Security 2011 in XP

    Hey when I goto in the internet newspaper, I get an Internet Explorer alert. When I goto continue surfing without any security measure, it doesn't let me go to any page

  • HP ENVY m6-1205dx: System disabled after the wrong password Admin

    Hello I write for the first time, so don't really know if its in line. My system has been disabled. HP ENVY m6-1205dx, Windows 8. A frozen after 3 unsuccessful attempts to enter the administrator password! Display types: System off [92025607] Please