behavior strange finder

Similar Questions

• Strange behavior of Finder

  Yesterday my Finder started to act up. Now, when I open a finder window, the window is showing a black color or showing the desktop rather than the usual files and folders.

  Here is a video screenshot: http://screencast.com/t/RxVetYwv21

  I tried all fix it suggested online with no luck:

  Restarted

  Apple.com.plist.Finder deleted

  Killall Finder into the Terminal

  Scan of Malware ran

  Using OSX 10.9.5

  No software update took place since August 3.

  I created a new admin USER and the problem doesn't seem to be the case within this account, although I would fix the question as all my files and preferences are set up. to use this new account because none of my accounts of e-mail and files are in this account.

  Has anyone ever seen this problem? Any thoughts on a fix?

  Thanks in advance

  You can try to download the latest update Combo Mavericks from here, Update OS X Mavericks 10.9.5

  This could just reset some settings for you, but will not damage your important data/files etc.

  Always make a backup of the first and check your disk by using disk utility.

• Tecra 8000: Behavior strange keyboard after reassembly

  Hello

  After reassembling the individual keys on my keyboard in Tecra 8000, the keys have a strange behavior. For example, if I press the 2 key the display shows '82' or 'q '. If I hold the button longer, the display shows "2222222222222...", the right to sign for the key. "
  You know, what can I do?
  I had to go back the key because my little niece takes off all the keys.

  Thanks for your reply,
  Butch

  Hello

  I agree with Daniel. There is a technical problem and the only thing you can do is to try to clean the contacts. If there is no success, you need to replace the keyboard. This unit is older and I am sure you can find a used keyboard at low prices.

  Good bye

• Seriously the behavior strange opening file HAVE CS5 Mac

  I don't really know how to find solutions to this problem, but today when I opened a file existing art Illustrator immediately took a part of the project and gave him a white fill with black outline... I thought that I had pushed a button and accidentally caused cela, but when I hit undo, nothing happened. When I looked in the Edit menu, the selection of the cancellation was not available. Close the document without saving changes, leave IT and I has reopened the case. Same thing happened. Then I restarted the computer. Same thing. Opening a different file does not do. Check out the screenshots for before (screenshot of an overview of the Finder) and after (once the file is opened in Illustrator). When the file is opened, for a brief moment, all right and then something happens, and the document is converted. If I try to close the document, I request if I want to save the file (which I did not). Anyone can shed light on this strange behavior and how to fix it?

  Thank you!!!

  -g-

  It's the beforemath:

  

  It is the sequel:

  

  It almost seems that a script runs. I'm retired.

• Query Sub behavior strange when using Expressions regular Oracle

  I met a strange "inconsistent" when you use an Expression regular Oracle with subqueries in SQL. Here are some details on how to reproduce what I have observed. We managed to find a solution to this "problem" using a database index; I'm writing this case hoping to better understand why Regular Expressions Oracle do not seem to work in the same way that the older, standard functions integrated as INSTR, SUBSTR, AS, etc..
  
  Environment settings:
  This test has been done using Oracle XE (GR 11, 2) on 32-bit Windows operating system. For my test, I used the HR schema (which is delivered pre-completed with the installation of this product) with some modifications of my own.
  
  Make the Test objects:
  

  create table hr.emp_test as
  select to_char(employee_id) as emp_id_char, employee_id as emp_id,
  first_name, last_name, hire_date
  from hr.employees;

  To illustrate my test, I inserted mixed alphanumeric values and a null value in the column of my emp_id_char for good measure:
  

  insert into hr.emp_test (emp_id_char, first_name, last_name, hire_date)
  values ('XKCD123','TEST','LASTNAME',sysdate);
  insert into hr.emp_test (emp_id_char, first_name, last_name, hire_date)
  values (null,'TEST1','LASTNAME2',sysdate);
  commit;

  * (1) this request fails once a nonnumeric value is inserted into the emp_test table.*
  

  with
     sub1 as ( select to_number(emp_id_char) as emp_id, first_name, last_name, hire_date 
        from hr.emp_test  )
  select * from sub1
  where emp_id between 100 and 110

  * (2) this query works OK.*
  

  with
     sub1 as ( select to_number(emp_id_char) as emp_id, first_name, last_name, hire_date 
        from hr.emp_test where emp_id_char not like 'X%'  )
  select * from sub1
  where emp_id between 100 and 110

  * (3) this query works OK.*
  

  with
     sub1 as ( select to_number(emp_id_char) as emp_id, first_name, last_name, hire_date 
        from hr.emp_test where instr(emp_id_char,'X',1) = 0 )
  select * from sub1
  where emp_id between 100 and 110

  * (4) this query Fails.*
  

  with
     sub1 as ( select emp_id_char, first_name, last_name, hire_date
                 from hr.emp_test
                where regexp_instr(emp_id_char, '[^[:digit:]]') = 0 ),
     sub2 as ( select to_number(emp_id_char) as emp_id, first_name, last_name, hire_date
                from sub1 )
  select *
  from sub2
  where emp_id between 100 and 110
  
  ERROR:
  ORA-01722: invalid number

  * (5) even down the results of the rational expression of 3rd under the query in sequential processing order also FAILS *.
  

  with
     sub1 as ( select emp_id_char, first_name, last_name, hire_date
                 from hr.emp_test
                where regexp_instr(emp_id_char, '[^[:digit:]]') = 0 ),
     sub2 as ( select to_number(emp_id_char) as emp_id, first_name, last_name, hire_date
                from sub1 ),
     sub3 as ( select emp_id, first_name, last_name, hire_date from sub2 )
  select *
  from sub3
  where emp_id between 100 and 110
  
  ERROR:
  ORA-01722: invalid number

  * (6) that it does not like previous query as well *.
  

  with
     sub1 as ( select to_number(emp_id_char) as emp_id, first_name, last_name, hire_date,
         regexp_instr(emp_id_char, '[^[:digit:]]') as reg_x 
         from hr.emp_test 
         where reg_x = 0),
     sub2 as ( select emp_id, first_name, last_name, hire_date, reg_x
        from sub1 where reg_x = 0 )
  select * from sub2
  where emp_id between 100 and 110
  
  ERROR:
  ORA-00904: "REG_X": invalid identifier

  Our Solution...
  Add a hint to the query of sup that 'hiding' the result of sub1 in memory. That did the trick. This suspicion resembles only viable workaround for this behavior. Other old built-in functions (INSTR, AS, etc.) an they were automatically following the execution plan (results of cache memory) that he had to use a 'hint' to force with the function of the regular expression.
  
  The conclusion, which is what I would like to help to understand or explain is that:
  If you create a series of queries/sup queries or inline views, values depend on "regular expression" type built-in sql functions do not seem to stick or maintain when implemented in complex query logic.
  
  Any idea is appreciated!
  Thank you!
  
  Published by: 870810 on July 6, 2011 15:47

  870810 wrote:
  I met a strange "inconsistent" when you use an Expression regular Oracle with subqueries in SQL.

  This is the expected behavior and has nothing to do with regular expressions - much less directly (I'll explain later). Main rule: there is no WHERE clause predicate order. Even if you use views, views online, subquery factoring, optimizer etc. can extend your display, display online, a subquery factoring. And it's Optimizer who decides the order of execution predicate unless you use the ORDERED_PREDICATES key. Now, I can explain. Regular expressions are powerful enough but also everywhere in life to pay for it with the higher cost of execution. That's why optimizer decides to apply emp_id between 100 and 110 first and regexp_instr (emp_id_char, "[^ [: digit:]]'") = 0 later.

  explain plan for
  with
  sub1 as ( select emp_id_char, first_name, last_name, hire_date
  from emp_test
  where regexp_instr(emp_id_char, '[^[:digit:]]') = 0 ),
  sub2 as ( select to_number(emp_id_char) as emp_id, first_name, last_name, hire_date
  from sub1 )
  select *
  from sub2
  where emp_id between 100 and 110;
  
  SQL> @?\rdbms\admin\utlxpls
  
  PLAN_TABLE_OUTPUT
  -------------------------------------------------------------------------------------
  Plan hash value: 3124080142
  
  ------------------------------------------------------------------------------
  | Id  | Operation         | Name     | Rows  | Bytes | Cost (%CPU)| Time     |
  ------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT  |          |     1 |    57 |     3   (0)| 00:00:01 |
  |*  1 |  TABLE ACCESS FULL| EMP_TEST |     1 |    57 |     3   (0)| 00:00:01 |
  ------------------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
  PLAN_TABLE_OUTPUT
  -------------------------------------------------------------------------------------
  
     1 - filter(TO_NUMBER("EMP_ID_CHAR")>=100 AND
                TO_NUMBER("EMP_ID_CHAR")<=110 AND  REGEXP_INSTR
                ("EMP_ID_CHAR",'[^[:digit:]]')=0)
  
  15 rows selected.
  
  SQL> 
  

  As you can see, optimizer uses a FULL SCAN to read data from the table and apply emp_id between 100 and 110 which translates TO_NUMBER ("EMP_ID_CHAR") > = 100 AND TO_NUMBER ("EMP_ID_CHAR")<=110. and="" obviously="" it="" fails="" trying="" to="" convert="" xkcd123="" to="" number.="" now="" cost="" of="" instr(emp_id_char,'x',1)="0" is="" lower="" and="" optimizer="" decides="" to="" apply="" instr="" first.="" therefore="" xkcd123="" is="" filtered="" out="" before="" to_number="" is="">

  SQL> explain plan for
    2  with
    3  sub1 as ( select emp_id_char, first_name, last_name, hire_date
    4  from emp_test
    5  where instr(emp_id_char, 'X') = 0 ),
    6  sub2 as ( select to_number(emp_id_char) as emp_id, first_name, last_name, hire_date
    7  from sub1 )
    8  select *
    9  from sub2
   10  where emp_id between 100 and 110;
  
  Explained.
  
  SQL> @?\rdbms\admin\utlxpls
  
  PLAN_TABLE_OUTPUT
  -----------------------------------------------------------------------------------------------
  Plan hash value: 3124080142
  
  ------------------------------------------------------------------------------
  | Id  | Operation         | Name     | Rows  | Bytes | Cost (%CPU)| Time     |
  ------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT  |          |     1 |    57 |     3   (0)| 00:00:01 |
  |*  1 |  TABLE ACCESS FULL| EMP_TEST |     1 |    57 |     3   (0)| 00:00:01 |
  ------------------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
  PLAN_TABLE_OUTPUT
  -----------------------------------------------------------------------------------------------
  
     1 - filter(INSTR("EMP_ID_CHAR",'X')=0 AND
                TO_NUMBER("EMP_ID_CHAR")>=100 AND TO_NUMBER("EMP_ID_CHAR")<=110)
  
  14 rows selected.
  
  SQL> 
  

  The bottom LINE: With the help of strings to store non-chaine (numeric in your case) is never a good idea and shows design problems.

  SY.

• Behavior strange screen/video Satellite Pro P100-109

  I have a strange problem with my Satellite Pro (P100-109 model pspa3e 00n009du). I edge video card printing is letting me down, so if anyone has a solution so please help!

  Yesterday, while working properly since I bought the machine, I had a strange video behavior. Black icon arround windows not updated correctly etc.
  After a restart of the system, these problems seemed resolved, but it lasted just a view minutes.
  After awhile, I got a blue screen (BCCode: ea BCP1...) BCP4:00000001 SP: 2.0) learned Internet research that his had to do with the video driver.

  Symptoms of the display:
  -Vertical dotted lines shown on the screen of the bios toshiba (variety of colors)
  -Loading of Windows show a few vertical lines as well
  -After loading the clickable elements appear black (not titles of window - no buttons shown/rendering)
  -L' screen goes black every 4 seconds
  -System responds very slowly, but sometimes it seems that it works normally
  -mouse disappears
  -After awhile that I get a black screen, system does not answer more.
  -In windows safe mode (so do not using the nvidia drivers), the display seems to work normally

  DID the next trying to solve my problem in vain:

  -J' I uninstalled/removed the nvidia drivers and installed the last on the toshiba site.
  -Deletion of original and installed drivers drivers Guru3D site (also used the Driverutility from the same site).
  -J' I uninstalled/removed the nvidia drivers and installed the original
  -Upgrade to SP3

  Uninstalling the driver (in safe mode) and so to use a generic driver only seem to work.

  Anyone know how this can be resolved or are these signs that the nVidia GeForce Go 7900 has been roasted.

  Hello

  Long story. short answer...

  It is really possible that your GPU chip malfunctions.

  I came to this conclusion because the laptop don t symptoms occur if the graphics driver is not installed.
  If the graphics card driver is installed the graphics card would go with the best performance and possibly graph questions would appear once again.

  I think that you can't do anything to what might solve this problem outside to contact the ASP in your country and ask for help.

  Good luck

• Clean install 10.11.3 and strange Finder problems

  Hello.

  I had the Apple store wipe and install the last El Capitan on my Mac (because of unsolved problems of metadata/finder). Icloud, I have successfully downloaded a new photo library - it works and has all the things perfectly. Yay!

  I have restored my files from my Time Machine drive and they have been copied to the 'fees' - installation for most multimedia files and documents. Not many stuffl

  What does Finder:

  1 from the start it says my photo library has been opened and modified at boot time. (And never updates these same moments so I open it and change it.) However, it works as it should, update iCloud photo library as elements are added and added photo albums - it was what he did on 10.10.5 nuclear front.)

  2. other files nnever reflect the dates open if files are open but not modified. Some do it so modified. PDFs just don't update like never opened. If I change a file - as a random .jpg on my desktop or in Finder by turning - it updates such as amended. If I just open it, it will not refresh as 'last opening. Records will change if I open a file in the folder.

  It was the similar behavior on 10.10.5 we tent to set. Rather than simply update, I started cleaning.

  Any wisdom? It wasn't an easy thing for a new user to spend to have the same problem. Does anyone else know this?

  He is a researcher? It's the OS? My hardware meets the tests of Apple.

  Thank you

  H

  MacBook Pro, OS X El Capitan (10.11.3)

  Looks like a normal behavior. If you simply open a file and then close it, no date of update should change. If you change the file, and then save it, the date of update changes.

  Open last date also changes if you save without changing anything, as if you make changes and then save. Simply open and close a file while doing nothing do not cause the last open to change.

  These are the default. There is no change without changing the OS X itself. If you wish, you can post your request to Apple's Feedback. Most likely, however, it will not be changed or will not be a very high priority item.

• XControl - behavior strange element parameters

  Hello

  I develop an XControl and I came across a strange problem. If I create a property and go in properties XControl-> settings for and select property, I am able to set the Unique identifier, description, etc. But when I close the project and open it again and go into settings of the element of the property is not marked as property more (it appears as a normal folder), so I'm not able to set Unique identifier, description, etc. more. I have attached two images below that shows the behavior. Judge several times and it's always the same, as when I create new XControl. I have LV 2012.

  Normal behavior

  

  Once the project has been closed and reopened

  

  Thank you

  Andrej

  Dear Andrej!

  Thanks for the detailed description. I checked, and it's a known issue with LabVIEW currently.

  To work around this problem, you can open the XControl directly with LabVIEW (so just open it as it is and not as part of a project).  This allows you to see and specify all the parameters of the element correctly.

  Kind regards:

  Andrew Valko

  National Instruments AE

• Behavior strange Portal NMP

  SNTC portal has a strange behavior:

  -Admin white dash

  -Summary of the inventory information about devices but everything is empty

  -Able to download a current ratio and loans received by e-mail however my reports is empty

  Any suggestions for investigation?

  Thank you all

  Hi Christophe,

  What browser do you use? I would recommend Chrome or Firefox. If you are already using one of those, I would recommend to empty your cache and restart the browser. Finally, try to open the portal in an ingognito tab. If the problem persists after trying these fixes, please update this post with a screenshot or two examples you provided.

  Thank you

  Nathalie

• Behavior strange cfinclude CF11 and Yosemite

  Hello

  I have a strange problem with my includes, if I save my file with the changes, CF can not find more.

  Example:

  < cfinclude model ="views/file.cfm">

  Works fine, when I change something and save file.cfm, I have the following error 'could not find the included template views/file.cfm."which is strange, because the file name and location has not changed.

  Change the the cfinclude and the name of the file in "file1.cfm" works. Which made me think, but he had something to do with caching, clear the cache and restart the CF did not work.

  Someone has an idea?

  Thank you

  G.

  Running

  OS X 10.10

  CF 11 Upd 2. Dev

  It took me almost half a day...

  The clear cache buttons did not work, but when I unchecked 'Save class files ' and restarted CF the problem has been resolved.

• Behavior strange question slides as well as a countdown timer!

  Hello Captivators,

  I am facing a strange behavior on the slides in question with a countdown. Whenever I have put a countdown on a question slide, one of the options and answers disappear. What's not here? Am I missing anything in the settings?

  I am using Captivate 8 (Trial Version).

  
  

  

  
  

  

  Thanks in advance for your support.

  Greetings

  Please, do not post the same question twice... Will check this point, but had to read your question twice. Not very friendly to post in several forums.

• Strange Finder search Action

  -J' made a small text file (rtf) called view zip files.rtf

  If I search with spotlight for display, display zip, view files zip, reviews, Spotlight etc. detects the files correctly.

  If I search with Finder, view zip files.rtf, or any partial name it will not find the file.

  If I join any combination of file name in quotes, including the complete file name, it will search for the file.

  Is this the way that Finder is supposed to work?  I figured putting in quotation marks was not necessary for a complete file name.

  Thank you

  When your file name includes spaces, without the quotes the entrance will be interpreted as individual words.

• Behavior strange iMac

  My iMac is only around the age of five months. (iMac 5K, 27 inches, end of 2014) In the first month, he began acting strangely.

  Happening every other day, then every day, now, maybe two or three times a day.

  If I leave on for some time, it was impossible to all suddenly typing in the search bar of safari (or amazon, etc.). Each letter would take a few seconds to appear, and the popup of alternative character would start to appear on the letters. Then, when I choose to restart, in the "are you sure...". ' popup instead of an icon of power in one button circle, it would be an arrow in the circle. Reboot would be back to normal, but now more and more short periods.

  I was hoping it would be after the OS updates, but it's just got worse.

  Everyone this experience or has an idea of what might happen?

  This keyboard exact problem happened to me 3 or 4 times over the last two months, with the extra trouble losing volume control (it will either mute or maximum). Restart usually solved it but not this last time (yesterday and today). He seems to have stopped in itself allows me to type this. You wonder if it's a question of bluetooth.

  I got this imac for well over a year, the problem does not appear until I "upgraded" to El Capitan. Hmmm.

  I understand these things myself, but I can call it Apple support next time.

  iMac (27 inch, end 2013) El Capitan 10.11.3 Version

• Behavior strange keyboard Lenovo Y-50

  Hey. My Lenovo Y-50 is a little older than a year, and all of a sudden the keyboard started acting strangely. On the windows login screen, everything is normal, but then the keyboard does not work. When I turn on the keyboard on the screen it starts to work immediately. Any ideas what the problem may be?

  Hey, I tried everything and nothing seemed to work. But then I turned off FilterKeys, allowed him once again and tweaked the settings a little bit and now everything worked for a few days. I don't know what it was, but the problem seems to have been in the settings for FilterKeys.

  Thanks for the quick response.

• Behavior strange battery on the iPhone 5 with iOS 9.2

  After installing iOS on iPhone 9.2 5 phone consumes my battery unusually quickly and in a very strange way.

  Specifically, after be recharged to 100%, it can go up to almost 60 to 50% within 1-2 hours of waiting use or with some very basic internet as e-mail, facebook, whats app etc. (not youtube or other battery consuming requests, no call phone and not a lot of applications running on the bottom). If I do 2-3 a few phone calls, the battery can easily go to 0. Another strange issue is that sometimes when the battery indication is around 60-65% the phone is suddenly switched off indicating low battery. I can't turn back on until I plug in power. Then my battery will immediately 0% back to 60-65% and charing. If I disconnect the cable again and wait a few minutes, it climbs from 60 percent to 15 percent. If I connect the cable again, as it did at 60%. A few more times, he spends 40 to 45% to 10% in both directions.

  My wife has an iPhone 5 with iOS installed 9.2 and has similar problems with the battery. On previous versions of the software that we have never had such problems, the battery is sufficient for use throughout the day with plenty of internet and other applications and a few phone calls. My phone is now almost useless, the only way to take the battery throughout the day is to have it on the stand mode with all applications closed and no phone call, and once again the battery remains close to 100% for a long time.

  Is a known, issue y at - it solution or something I can do like downgrade the SW, or should I wait for the next version of the software be released?

  Make an appointment at the genius bar and have checked phones.

  Some units of the iPhone 5 have been manufactured with a defective battery. Apple has a program in place to replace them for free. You can check here serial numbers if your phone is part of the program. https://www.Apple.com/support/iPhone5-battery/