Being not recognized in dimension 8400 DVD drive

Similar Questions

• Dimension 8400 will not start up cd or dvd drive

  Hello

  I have a Dimension 8400 that refuses to boot from the CD or dvd drive. In the bios, tried to move 'Onboard or USB CD-ROM Drive' to the first position in the boot sequence. Also, I tried pressing "f12" during startup to access the start menu. I tried to select the "integrated or usb cd-rom" option from there with a cd bootable in both drives and still have had no success.

  Any help will be greatly appreciated, thank you.

  I also have the same problem.  Do not understand why Dell does not address this issue.  Trying to recharge a system using the Dell restore CD and have two CD drives in the system provided with the system and will not start to :(

• Equium A60: DVD - RAM, being not recognized correctly

  Hiya!

  I have an EA60 and my carpet * a DVD-RAM UJ-820 s is currently not recognized by the laptop properly. When I go to device drivers, he said the driver has been loaded but returns the error code 41. I reloaded the Driver and the device, and it makes no difference.

  I also bought a new Pioneer DVD-RAM and it comes up with the same error code.

  Can someone help me please?

  [email protected]

  Kind regards

  Gary

  To start the registry editor
  Click Start, run, type regedit, and then click OK. Start the registry editor.

  Then follows the steps described above.

• Can not detect a CD or DVD drive

  I got my dell dimension 3000, a few years ago. My roommate about it and started to download a lot of who knows what. Thus, he got a virus. I cleaned up and then one day my DVD player no longer works. My CD drive still worked at this point in time. So last year, I bought a new DVD player to install in it. I then open it and pull my old one. And do what you know. Now it cannot detect my CD player either. And my new DVD is just as useless. So I put in the old DVD player, thinking that my CD player would work once again out of luck. But now I get an error message everytime I turn on my computer, saying: he can't start the CD player, because it is not installed. I got tired to see this message, so I asked the Bios not to try to read the disc whenever it turns on. Is there someone who can show me in the right direction to get this working? I just used a second computer and make a network connection to a Cd drive to formal and reinstall windows Xp. My CD and DVD drives are still not being displayed. I couldn't drive resource of work either because I couldn't remember how to make this connection network player again. So I put the CD on my external hard drive and tried to use it this way, but it did not really work. Some of the things just turned into shortcuts.

  
  

• Not able to burn a DVD: drive not detected

  DVD writer

  I'm trying to burn a CD from my vacation. I downloaded my content vidiocamera and made a film with Muvee Auto producer 6.1. I tried burner DVD + R, when I click on the burner, I get a message that it cannot read the disc, as well as my d drive not acknowledge that a disc is in the drive. I checked the drives and they say that they do not work properly. Help!

  I'm trying to burn a CD from my vacation. I downloaded my content vidiocamera and made a film with Muvee Auto producer 6.1. I tried burner DVD + R, when I click on the burner, I get a message that it cannot read the disc, as well as my d drive not acknowledge that a disc is in the drive. I checked the drives and they say that they do not work properly. Help!

  =======================================
  The following links may be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• CD/DVD drivers are missing and my system is not able to detect the dvd drive.

  Hi, after installing some updates my dvd/cd drive is not detected by the system and the option is not in my computer menu, so I checked in the Device Manager. and my cd/dvd drivers are completely absent and not present in the Device Manager. I m using vista Home premium, help someone
  Thank you

  Hello

  1st reboot and watch again in Device Manager:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Periodically not seen by windows CD/DVD drive

  When you use iTunes, I started to notice that the program was telling me the burner or software disk was not found and iTunes would freeze. Then I checked to see if the disc has been recognized on the computer devices... it wasn't. I tried several updates and removal of the CD driver and restart... without change the computer does not see my CD/DVD drive. Any help would be greatly appreciated.

  http://support.Microsoft.com/kb/314060

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Read the part about iTunes:

  If you cannot play or access a CD or a DVD, you may have to reinstall programs. Some programs are may not be able to use your CD or DVD drive until you reinstall these programs. If the problem persists when you install or uninstall these programs, contact the manufacturer of the program to see if an update is available that solves the problem. Some examples of programs that might be affected are:

  • Apple's iTunes software
  • Software Nero Nero Inc.
  • Roxio Creator of Sonic Solutions software
  • Microsoft Zune software

  See you soon.

  Mick Murphy - Microsoft partner

• multi dvd recorder Windows 7 Home premium for Acer x 3910-U4022 is not recognizing any cd or dvd inserted.

  in fact, nothing happens.

  a guru out there get help please inform

  Thank you very much

  gogibalbir

  Hello

  1. you get any error message?

  2 have you tried using different disks?

  3. were there any changes made to the computer before the show?

  Please follow the steps in the link.

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

• Satellite M30x + Win7: DVD not detected by the CD/DVD drive

  Hello

  I use a M30x since 2004 with its CD/DVD drive * a S mat. DVD-RAM UJ-831
  When I was with Windows XP, I have never had problems to read or write on CD, CD - R, DVD, DVD - R or DVD - RW. But recently I installed windows seven, and since that day the drive won't recognize the DVD. I can still read and burn CDs and CD - R. I'm burning the same Virgin DVD-+ R/RW as before, but the drive won't detect them. Those I have already burn are not detected or the other.
  My computer says that the CD/DVD drive work properly and drivers are up to date.
  I tried to clean the lens, but nothing has changed. And I tried to reinstall the drivers, but I could not found for windows seven.

  Thanks for the help.

  Hello

  Have you tried to delete the upper and lower registry Filters >
  Pleas check it!
  http://support.Microsoft.com/kb/270008/en-us

  You will find the registry key where filters must be removed.

• Satellite A100 does not recognize the new CD/DVD drive

  I bought a new CD/DVD drive for my A-100 of Toshiba Satellite age of four year old went crazy and wouldn't work.

  Unfortunately, I bought a DVD of Toshiba Portege A100 / reader Combo CD - RW that is not exactly what I had before the jump that it will still work.

  Unfortunately, I'm surprised because it does not recognize the CD/DVD drive at all: /...
  It seems to work, and the light blinks I think that it is not broken.

  I just plugged it because that's the way I was told to do.
  I need to download the drivers to operate?
  It will work on my laptop, or is it a "most recent" CD player that will not work with my laptop?

  I'd appreciate any help. THX

  The BIOS does not recognize this new CURIOUS because the player seems not to be fully compatible.
  I think there bad master/slave/c-salt settings

  As you know these settings can be changed on the external CD/DVD drive for desktop switching jumper. But it is not possible for computers portable CD/DVD players.

  You can solve it only purchase a new compatible disc.

  Usually the ASP in your country could help you buy this disc of these guys here
  However, you can consult the user manual if there are a few details on the compatible sides.
  My user manual provides this information.

• Yoga Pro 2 - display not recognized in windows (hardware or driver problem?)

  Out of warranty by a month!

  Yoga Pro 2-256 gb, installed a new wireless card a month ago. Windows 8.1

  The touchscreen still work while the screen is black.

  System restarted after the mode 'sleep', in my opinion.

  The Lenovo logo is displayed, seems to load Windows, but when windows loads (I don't see it so it is a hypothesis of load) drafts of the screen and the black light is on.

  Can I connect an external monintor that connects after the return from sleep mode (odd). Who then off the backlight.

  When the external monitor, the internal screen is not yet recognized by windows.

  When I boot in safe mode, the internal display works fine with of course limited capabilities.

  I rebooted on the support site display drivers.

  Right now my internal monitor is not recognized by windows and is dark, and I can use an external monitor.

  Someone at - he of the clues as to what my happen? Hardware, driver etc?

  Can what information I provide?

  It is a pretty weird problem with contradictory observations.

  (1) screen working in Mode safe but not regular boot. (So not the hardware problem)

  (2) display on an external monitor in normal mode. (So, no drivers issue)

  Have you installed the wireless card yourself? You unplug the cable from the screen during the installation of the card?

  Could you re - open and check that all connections are good?

  The Wi - Fi card works well?

  I also recommend a complete reset of the laptop to eliminate the possibility that it is a corrupt driver. You can use the NOVO button to reset your laptop. Make sure you make a backup on an external drive for your personal files.

• map of mSATA being not recognized on X 220-help

  Lenovo x 220

  Winodws 7 64-bit, up to this day

  MyDigitalSSD Super Cache2 50mm SATA III (6 G) mSATA SSD

  I installed my mSATA card by following the instructions and the party went well. As a couple of other people the player is not recognized by Windows 7. I checked storage management in windows 7 and the drive is not there in any form. I disabled all the caches as suggest some positions in the policies for the drive in windows 7. Once again no drive recognized.

  Any help you could provide would be really appreciated.

  Thank you

  Hi camjohnston,

  There are a few discussions about this on this map and a knowledge base article for you to check.

  Let us know what you find!

• Why not print my Lightscribe cd/dvd drive on my 'lightscribe' cd/dvd?

  I tried to print (on the right side, of course) a "Lightscribe" cd that I put in my cd/dvd drive, but it does not print. Why?

  You are welcome.  Thank you for the additional information.

  This is Lightscribe System Software Update for the computer.  Install to see if that solves your problem.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• Any update yet to USB sticks being not recognized?

  I searched for help and found similar problems have yet to see any real solution.  Seems that many face the same problem with key USB cannot be recognized on Windows 7

  Is there any solution yet?  I'm not computer whizzkid so if there is a REAL difficulty (not something dubious Regedit that sounded like he screwed up computers everybodys!) please let me know how to do - it is so frustrating!

  See you soon

  Hello

  Have you checked the player on other computers running Windows 7, Vista or XP?

  Be sure to check forums and with Support of the manufacturer of the Drive, their documentation online.

  It is SanDisk however, these methods can help with other brands of USB keys.

  Cruzer not recognized by the PC
  http://KB.SanDisk.com/app/answers/detail/A_ID/10/kW/Cruzer/r_id/101834

  ===========================================================

  Check with manufacturer's support the system, their drivers and documentation online and ask for their
  Forums (if any) for known issues. Search for updates of BIOS, chipset of low-level drivers and others
  USB drivers on the site of the manufacturer of the system (motherboard for systems custom built manufacturer).

  If a PC remove ALL power and reinstallation of the cards, memory and cables (at both ends where possible)
  -in fact, remove and replace - do not just tight. Remove the dust bunnies and make sure that the ventilation openings
  are clear. For a laptop on everything that can be done is to reinstall the memory and clear the vents.

  If nothing works and it's a PC, you can disable the onboard USB and use a USB add-in card
  is not expensive. Of course for a PC or laptop using a real computer store (one who does in)
  Home service) or system manufacturer support can be requested.

  ============================================================

  Other troubleshooting methods:

  1 reboot to be sure nothing blocks the ports.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - Device Manager - click in the box of white/white - VIEW - show hidden devices

  Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
  plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
  for all instances

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick the three 1st choice
  to see if one is there. Try to remove all instances and restart then plug the drive.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Audio CD not detected in the cd/dvd drive...

  error reports seem to indicate application suspended... the matushita unit will now recognise a DVD and is now signed as windows XP SP3 DVD player... but has the ability to read and burn both media...

  It has always been skittish about the shift in the media...

  Hello

  1. is this problem limited to this particular Audio CD or Audio CD?
  2 have you installed any third-party CD/DVD burning software?

  Method 1.
  To diagnose and repair problems with your CD or DVD drive when trying to read or burn media automatically.
  Reference:
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Method 2.
  The article below describes how to troubleshoot common problems that may occur when a Windows XP-based computer cannot read a CD or a DVD in a CD or DVD drive. This article contains several methods that you can use to try to solve these problems, and it also includes some advanced troubleshooting steps.
  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
  http://support.Microsoft.com/kb/321641/

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.