Belkin Wireless connections, lack of quick links

Hi all, my wireless connection has worked for centuries with no prob, now every time I have quit or restart my machine, I have to restart my wireless connection via removing the dongle in a usb port and wait ten seconds insert it again as vista windows claims it can find all networks. After reinserting the dongle in the usb port of the pc makes a sound sound recognition when I reinsert the dongle and the dongle Flash. What guy the answer here? Regards.Rick.

Try the steps in the below items

http://www.Belkin.com/support/article/?lid=en&PID=F5D7230-4&aid=2437&scid=221
http://en-us-support.Belkin.com/app/answers/detail/A_ID/80/~/troubleshooting-Internet-disconnects

Tags: Windows

Similar Questions

  • I am not able to print from my 2nd computer. I use Verizon Fios and I use a Belkin Wireless connection to connect to the router

    I can't print from my 2nd computer.  I use Verizon Fios to communicate with a wireless router (Belkin) (main? / main thru?).  I have 2 computers that access my internet connection.  The 1st computer that is in the same room as the router "verizon" and the printer is capable of printing.  The 2nd Bureau is not.  But there is good communication with the internet.

    Would it in my settings that could very well be the problem?

    Hello

    1. what operating system is installed on your second computer?
    2. has been the second computer can print very well without any problems in the past? If Yes, you did any hardware or software changes before the show?
    3. that you get an error message when you attempt to print from the second computer?
    4. What is the brand and model of the computer and the printer?

    Please provide us with more information about the issue so that we can help you better. Visit the link below and send your request.
    Suggestions for a question on the help forums:
    http://support.Microsoft.com/kb/555375

    In the meantime, you can refer to the links below.

    Troubleshoot network printer in Windows Vista and Windows 7:
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

    Resources for the resolution of the problems of printer in Windows XP:
    http://support.Microsoft.com/kb/308028

    Kapil Purohit - Microsoft

  • Resolved - problem of wireless connectivity "wlan0 link is down.

    Quick update:

    * If you encounter this message, make sure that you are trying to connect to a wireless "N".

    Yes, he is in small print on the box, right, sony will not ask you this when you are troubleshooting.

    * If you rely on Sony for smart assistance, forgetabout it.

    * After the receiver a comment card and to express my disappointment, the call center outsource sent a letter... and when I called to discuss, they were still clueless.

    Sorry, but the support structure is absolutely catastrophic.

    We now return you to your regular programming...

    ----------------------------------------------------------------

    OK, let's go, in detail:

    My Sony dashboard came again, out of the box today. It will connect to my network.

    FYI: My set of skills: I am an engineer of sales network, with an extensive network of Wi - Fi and running in my house.

    After connecting the dashboard and providing configuration information, the message I get is:
    __________________________________________________

    Network configuration
    Failed network connection...

    wlan0 link is down
    did not get an IP address
    Internet is inaccessible
    __________________________________________________

    Like others on this forum, it seems that my dashboard won't "handshake" with my wireless router.

    To try to solve problems, I did the following:

    (Slot 0): both my wireless router and my attempt to connect to the sony dashboard are in my home office, so the intensity of the signal should not be a problem.

    (1) check the connectivity wireless on a multitude of home devices: laptop, TV, iPhone, ipad... in short: Wireless works. Both with fixed IP and distributed DHCP address.

    (2) restart my Rosewill RNX - N4, wireless "N".

    (3) allow my SSID be visible (that I found which helped my LG TV to connect during its initial configuration)

    (4) checked my WLAN settings on my router:

    SSID: *.
    Security mode: WPA2 only: personal
    Type of encryption: AES
    Pre-shared Key: v * m

    (5) restarted the dashboard of Sony.

    (6) wireless seems to work on the sony dash, as the configuration screen of the network about dashboard States:
    ______________________________________________

    Network configuration
    Choose a wireless connection

    ..:| (my ssid is displayed)

    MAC address: (my MAC address of my wireless router is displayed)
    ______________________________________________

    (7) I select my SSID (FYI: nobody else displayed) and click (next)

    (8) place comes the next screen:
    ______________________________________________
    Network configuration
    Choose the key to coding (WPA2-PSK)

    HEX)
    (o) ASCII
    ______________________________________________

    I select ASCII then (Next)

    (9) he asked my key, I carefully enter (.. .slightly annoyed that the screen will not edge to allow me to see all the characters that I'm going home)..., then click on (Next)

    (10) I choose Auto IP, as during the initial setup I keep it as simple as possible... and then hit (Next)

    (11) to the top displays the following screen:
    ______________________________________________
    Network configuration
    Confirm settings

    name: (my SSID) (My MAC Address)
    AUTH: WPA2PSK encryption: AES
    key: (poster in my correct key, read and validated twice)
    automatic IP allocation (DHCP)
    _____________________________________________

    Completely satisfied with it, I select (Next)

    (12) the sony dashboard begins its Network Configuration / connection looking for the network and then...

    (13) the following:
    __________________________________________________

    Network configuration
    Failed network connection...

    wlan0 link is down
    did not get an IP address
    Internet is inaccessible
    __________________________________________________

    (14) in an attempt to solve the problems, I also tried to set up with a static IP address:

    static IP address:
    IP: 192.168.15.20
    Subnet mask: 255.255.255.0
    Gateway: 192.168.15.1
    DNS1: 192.168.15.1
    DNS2: 8.8.8.8

    ... and the results were the same: "wlan0 link is down.

    (15) as a final step, I reset my wireless router to have no. SECURITY at ALL. Guess what? "wlan0 link is down.

    At this point, I'm at a loss for what I could do "evil".

    I welcome comments from other users, either to continue to solve the problem or sharing what you did to resolve your issue with connectivity.

    Thank you.

    c.

    Well, here I am, a moth and a half later.

    After speaking to Sony technical support...

    After sending the camera back to Sony...

    After having been informed by Sony that this point had problems, they need to replace parts, AND they were going to send me a new device to save time...

    I get a new, and it has exactly the same features / problem.

    So I try another router, same problem.

    Guess why?

    Because I have my network running "N" and it's a Sony wireless B/G device.

    Anyone who has mentioned in technical support... The point on the replacement due to damaged items was total BS.

    If you have a network of "N", it will recognize your SSID and even to recognize the security there.

    But it does not connect.

    Once I changed to a mixed G/N wireless environment, it connects.

    For example, you might say my own question... should have known.

    However, Sony sells a device "B/G" when almost everything comes standard "N"...

    Not cool, Sony... Not cool.

  • two computers using the same router belkin wireless gave rise to the loss or crippling a slow internet connection, why?

    Two laptops in my house share a belkin wireless router. Every 10 minutes, when the two laptops are connected to the internet, one or the other seems to push the other off the connection. Then speed either decreases or the connection is completely lost. This occurs when one of the laptops is using Skype or download, but also just when both are normally surf as well. I've never known a wireless router not being able to manage two laptops before. Any ideas, anyone please? The two laptops running Windows 7 if it helps?

    Hello

    Did you change to the computer?

    Method 1:

    I suggest you to see link and check.

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Method 2:

    I also suggest you to see link and check.

    Why is my Internet connection so slow?

    http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

    WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    See also:

    You experience slow performance in Internet Explorer 9

    http://support.Microsoft.com/kb/2398082

  • Installed wireless Belkin, unable to see network, get error windows cannot configure this wireless connection and starting the WZC abuse

    Hello

    I have a belkin wireless router that worked on my primary computer and a portable computer for years.

    Recently, I moved my main computer and now it dosnt seem to work. Belkin is installed but when I ask to see available networks, it says that windows cannot configure this wireless connection and starting the WZC abuse. Belkin still works fine on my laptop so I know no there is not a problem here. Can someone help me please? I tried to type in %SystemRoot%\system32\services.mcs\s as with a question of people, but all I get is windows can't find this.

    Any ideas please?

    Thank you

    * original title - Help... problem with belkin wireless *.

    Let's see if I can cut through it.

    You wrote:

    Click the Wireless Networks (see this picture) - I did

    Is the box 'Use Windows to configure my wireless network' checked or unchecked? There is no such box.

    I connect using - he says belkin. another box saying this connection uses the following items. then underneath there are 3 tabs - install, uninstall and properties. If I press on properties it says name provider and in this box, it says windows index.

    It seems that you don't have not clicked the "Wireless networks" tab, after you open the properties of your wireless adapter.  From your description, you look at the 'Général' tab: click HERE to see the "Général" tab Click HERE to see the 'Wireless Networks' tab.

    There are 5 columns: name, description, status, startup type and log as.  The values for the last 3 columns should be started, automatic and Local System - on my screen there are 4 tabs at the top - general, connect you, recovery and dependency.

    You skipped a step... 5 columns are in the 'Services' window initial... you arrive at "4 tabs at the top", AFTER you double-click the Wireless Auto Configuration.

    Status of the service which includes 4 boxes. stop suspend and resume. the button highlighted in the start menu

    Just to the right of the expression "Service status", you should see a Word.  On your system, this word probably is "stopped."  The 4 buttons (boxes) are how to control the service.  Because you said that the highlighted button is 'start' which means that the service is currently stopped, and you will need to click on this button "start" to start.

    I strongly suspect that you had used the Belkin utility to control your adapter - and now, you also started WZC.  As I wrote above, you can have both running at the same time.

    When you click the icon of your "Belkin", do you have a screen that looks like this: http://www.wi-fiplanet.com/img/2006/belkinn1/08.jpg

    If so, you should return to the utility Services and 'Stop' the automatic configuration service.  If you want to use WZC instead of the Belkin utility, see http://en-us-support.belkin.com/app/answers/detail/a_id/40/related/1

    I'm not familiar with the Belkin Wireless networking utility, but many wifi manufacturer utilities can be used to turn your wifi on and off, then maybe your was off (the adapter on your computer - not the router).  If you identify the model of the card you have in your main computer, I'll see if I can find the manual on the Belkin website and maybe give you a little more information.

  • Remote Access connects with shared connection, but when I connect the Ethernet to the box Belkin Wireless cable, there is no network connection

    I have dial-up internet. I have to computers. A PC running XP and a laptop that is running Windows 7.
    I have the connection shared, if I plug the Ethernet cable to the laptop, it will connect to the internet. I just bought a Belkin G wireless router.
    I want to know how to configure it, then the router Belkin Wireless put the switched signal shared wireless. I know it's possible, I'm not sure what I'm doing wrong. It is constantly with him saying on the phone "the DNS server does not respond.

    Connect the Ethernet cable from your PC to the WAN (Internet) port on the wireless router.  Do not connect to one of the router's LAN ports. Boulder computer Maven
    Most Microsoft Valuable Professional

  • Satellite L455-S5045 laptop Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access.

    PC laptop Toshiba Satellite L455-S5045, Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access. go to google.com and States page cannot be displayed, I ran diagnostics and reports, everything is configured properly. the wireless signal that d-Link has is 802.11n with a WiFi Code and running XP, I have WIN 7. Do I need to driver 802.11n, if I do, why I can not download it

    Hello

    To help you better, please answer these questions.

    1. don't you say no Internet access in the notification bar?

    2. what diagnosis you have to run?

    3 did you do changes on the computer before the show?

    To solve your problem, try the provided items.

    Why can't I connect to the Internet?

    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

    Wireless and wired network problems

    http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    You can check the link:

    Troubleshooting Wizard

    Reference (my computer can not connect to Internet)

    http://support.Toshiba.com/support/troubleshootSelfService?PRDTYPE=computers

    If you need help with the Windows operating system, just tell me and we will be happy to help you.

  • Lack of wireless connection continues

    I just bought a new laptop.

    The problem I have is keeps him without cutting wire. I think its something to do with the free Config software that has been installed on it. I can connect using the config of fancy free stuff, but the connection will go just every 10 minutes or more. Thanks to the tools of wireless connection of normal windows that lists your wireless settings it says I am not connected to my wireless, but if I try to click on it it says that I'm disconecting from him. I think what is happening is normal windows wireless attempts to connect every time that a whilse and it disconnects me free of config. Bottom right the ICO wireless normmal says not connected and free config says that it is connected. When the dialog box appears and says "can not conntect to your favorite network" he cut my connection.

    Help! It's driving me crazy, if I thought that I could just remove free config and use normal windows stuff then I would but disabling, it left me no internet at all and I'm afraid to remove drivers, or something important.

    Maybe someone could provide a solution because of you, but I doubt that this would be not possible without knowing the right laptop model and the preinstalled operating system

    In addition, I put t understand why you use Configfree to connect WiFi, you can use this tool for diagnosis offers, but if you want to establish the WiFi connection then I recommend using WLan parameters of Windows or the Intel ProSet utility (if card Intel WLan) or Atheros Wlan Utility (if Atheros WLan card.)

    PS: update driver WLan if possible...

  • Equium A60-181: how to connect to the router belkin wireless encrypted?

    The title says everything, how can I connect this laptop to my network with 128-bit encrypted signal. The router that I m trying to connect to is a belkin and connected without any problem before encryption. So please help me because I want to use my laptop again with the guarantee of the encrypted signal thank you.

    Hello Dean

    If your laptop can see your WLAN, it must be a problem with the network settings. In my view, you must configure the router to the factory settings and try to establish the connection without any network key.

    If it works well, you can then configure the network to be sure.

  • Wireless network lack of connections, network and Device Manager

    Good day, all the

    Recently I had to install a new hard drive and Windows 7 in my laptop VAIO from Sony, model VPC-F1290X, after my previous a corrupt laptop taking a fall. The installation went well, except that my WLAN capabilities are missing. The switch is in on it, of course, but the only option that appears is the Bluetooth. I checked to see if the icon for the network was present in network connections, so I could right click and activate, but it is absent. I also went into Device Manager to see if he would appear if I clicked on 'Show hidden devices', and I also tried to search for the hardware changes. All my drivers are up to date, and since then, I have installed all Windows updates. It has been a little over a month since the installation and I put the problem side and just continued to use the laptop with an ethernet cable. Now that the need emerged for a wireless connection, I can't seem to find a solution, and I found someone who is fully experiencing or has experienced a similar situation. All tracks to the installation of an adapter wireless from the Sony Web site seem to be oriented with a desktop computer.
    Any help or advice to an answer would be greatly appreciated.
    Kind regards
    Ryan

    You have installed the driver from the manufacturer of your laptop wireless?

    http://eSupport.Sony.com/us/p/model-home.pl?MDL=VPCF1290X&loc=3#/downloadTab

  • I lost my wireless connection, says no wireless connection available... but they are!

    Hello

    I use a laptop dell inspiron with windows 7 - I set up a wireless connection with talk talk about 6 weeks - and things has of worked - this weekend the small icon at the bottom of the laptop had a red throug crodd there - when I clicked on "Open the network and sharing Center" he registered the wireless connection, I use and had a maximum strength indicator , but a red cross through the connection.

    I checked the wireless router with my computer pc laptop and work - blaze they work correctly. So I have concluded, the dell laptop itself (which is about 6 weeks old).

    I plugged the yellow wire - and makes hard wired - and the internet works on the laptop.

    Keeping in mind I don't know anything about computers or how correct - can someone tell me if I've lost a program and where/how to find it or not it sounds like a defect on the laptop

    I'll be very grateful for any help

    Thanks domi

    If the Dell is still under warranty, by all means, file a claim and see if a new card does the trick.  It is a Forum of Vista, this is why everything is on Vista - you should have posted in the Forums of Windows7 if it is the OS you use - then the tips and links correspond to your system.  I suggested to contact Dell in a previous post - not specifically for this, but it would have developed in the conversation.

    Even if it is not under warranty, there is a good chance that the card is the problem if the system can connect wirelessly with another device (which means that the configuration is correct and connections work and Vista has no problem with the wireless operation).  If you can, try to make sure you can return it for a full refund if you attach and encounter the same problem.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • How to display PC on TV via a wireless connection

    Discover my computer on my tv

    How can I see my computer on my TV? I use a wireless connection and I have a WII connected to the tv and the network?

    Hi Reddogoh,

    There are two main options that I see in the connection of your television to the computer. One is a hardware solution by getting a TV tuner card, the second would be a software solution by using your internet connection (this should be a high speed / broad effective solution of the band) to stream TV on your PC. Each of these types has its own unique advantages.

    Hardware solutions (TV Tuner):

    First, there is the direct connection method. Examination of the main material here is the tuner TV for your PC card. An example of a vendor for this would be here:http://www.hauppauge.com/. The study in this case is to make sure that you have the right connection from your TV on your PC. There are several types of connections that could potentially work from your TV for PC: coaxial, RCA, S-video and VGA are some of the most common. One of the most interesting types of connection on the site mentioned would be a device which can converts a signal from coaxial cable from the TV to a USB device, which can then be plugged into your computer. One of the benefits of a hardware connection TV is the ability to record live TV, and the software for this feature is often included with the TV tuner. You can use wireless? We can as a type of adapter, but mainly the links are direct.

    Solutions software (Streaming and porn TV on broadband):

    Software solutions can be very economical because it piggy back on your existing broadband connection. Another advantage would be that the shows can be listened to on request.

    Prices can be as low as free, one example beinghttp://www.Hulu.com/ where you can listen to the full episodes of television through a license agreement between the content providers and Hulu.

    An example of a subscription model would be http://www.yourfreetelevision.com/ , which is about $30 every month.

    So, there are a few options and this should certainly point you in the right direction.

    (If this post was helpful ("vote as helpful") orAnswered ("mark as answer") to your question, please click on the corresponding button to help others find the answer more quickly.) Besides, if you feel that someone else has been useful, mark them too. Also, if you have any othercomments please let us know.)

    Hope this helps,

    Steve <> Microsoft Partner

  • Windows 7 wireless connection problem

    I just bought a brand new Alienware m17x and all drivers are up to date... .IM with broadcom wireless network adapter. The strange thing is that last night I was on the internet for several hours without any problem using the wireless, but this morning iwas unable to use my wireless internet access. This has happened several times now. Sometimes it says "not connected - no available connections" and sometimes he says "not connected connections are available" when she says, links, I try to connect to the network, but it says "unable to connect to the network. The only time wherever I was able to connect to wireless internet, was when my computer is automatically connected to my wireless network without me having to select the network and attempt to connect. I read things about windows 7, with a mode of "sleeper" for wireless connections or something, and that can be the cause of it and that it is better to turn off or downgrade to xp. I am really frustrated because I am not able to connect wirelessly and I hope you guys can help me find a solution.

     

    Guide to correctly troubleshoot wireless M17x
    with Dell Wireless 1510/Broadcom card
    by Glzmo

    Since many new Alienware M17x all powerful users, especially those who use Windows 7 as operating system there are various problems with their Wi - Fi connection and post threads asking how their difficulty over and over again, I decided to write this guide to show them how to solve these issues properly Commons. The solutions in this guide were created and designed for 64-bit Windows 7, but they may also work in Windows Vista, although these problems were experienced by users of Windows 7 mainly in the past. It could very well be that the problems start occurring in Vista as well with the new drivers and Windows updates.

    I. may not connect to the wireless network and or see the wireless adapter when the Ethernet cable is disconnected
    If you sometimes or always unable to connect to the wireless network, cannot connect to the wireless network when the Ethernet cable is disconnected, unable to connect to a wireless network unless you restart once to get this work and other weird problems to be unable to connect to a wireless network continue with section II. Otherwise, continue with section II..

    Sleep of a.i. Disable on disconnect device
    Some new Nvidia Ethernet drivers have a function called sleep device to disconnect. This is the culprit. Normally, it should only put the card Ethernet to sleep when the cable is disconnected, but it is buggy and thus kill the wireless connection as well.
    Follow these steps to disable this feature on your Ethernet Nvidia card:

    1. open the Device Manager of Windows by pressing Win + break, and then click on Device Manager on the left side.
    2 double-click network adapters.
    3 double click on NVIDIA nForce Networking Controller (Yes, that's indeed wired Ethernet adapter).
    4 click on the Advanced tab.
    5 select sleep on disconnect device.
    6 set the value to disabled.
    7 click OK and wireless should work again (may require a reboot later, but probably not).

    I.b. install different drivers (older) who do not have the device sleeping on disconnect feature.
    The above does not work or if you are not comfortable with these drivers, follow these steps (if step A.i. was successful, you will not need to follow these steps). Take care to create a system restore point before proceeding:
    1. click the Windows Start button in the taskbar.
    2 click on Control Panel.
    3 click on uninstall a program.
    4 in the list, double-click Nvidia drivers.
    5. Mark Remove only the following.
    6 in the box below, only check the Nvidia Network driver.
    7 click Remove and follow the uninstall instructions.
    8 restart the system, if you are prompted to.
    9 download another (older) driver from Nvidia.
    10 install the old driver.
    11 when asked what drivers you want to install, select only the network driver.
    12 follow the installation instructions and restart your system if prompted.

    II. Low or fluctuating wireless connection speeds
    If you have problems with WiFi low connection speeds (such as rates decline over time, the speeds are much lower than they should be, network lag/stutter in online games, loss of light packets, loss of internet connection as LAN works and other weird things) or speeds of fluctuating wildly without apparent reason wireless connection install the version of the Dell Wireless 5.60.18.8 drivers instead of the standard Broadcom drivers. All older drivers will usually cause the speed of connection under normal. Note, however, that you may need to install the driver manually via Device Manager as the pilot was not released for another laptop and is not officially available to the M17x yet - that's why the installer won't work. Take care to create a system restore point before proceeding.
    Here is a step by step how manually install the driver:

    1. download the drivers Dell Wireless 5.60.18.8.
    2 check out the R29128.exe file using an extraction utility like WinRAR or just run it and quit the installation program.
    3. open the Device Manager of Windows by pressing Win + break, and then click on Device Manager on the left side.
    4 double-click network adapters.
    5 double-click the Broadcom 802.11n network adapter entry.
    6 click on the driver tab.
    7 click the button Update driver .
    8 click Browse my computer for driver software.
    9 click on Let me take form a list of drivers for devices on my computer.
    10 click the disk provided .
    11 click Browse.
    12. select the folder that you extracted the drivers you just downloaded in step 1. in.
    13 select the subfolder DRIVER_US (if you are in the United States), DRIVER_JP (if you are in the Japan) or DRIVER_ROW (if you are in the rest of the world), according to the region you are in.
    14 click on the Open button.
    15 click OK.
    16 select the driver that says Dell Wireless 1510 Wireless-N WLAN Mini-Card of the list (you may have to scroll down to see - it presents itself as second to the last in the list for me).
    17 click on the Next button.
    18 you will get a warning that the driver that you are about to install is not compatible with your hardware. Ignore the warning and proceed with the driver installation.
    19 restart your system if prompted to do so.
    20 your new driver should now be properly installed and the speed of your wireless connection in the order.

    III. If all else fails (or you've just had enough of boredom arising from the Dell Wireless 1510/Broadcom card)
    Replace the Dell Wireless 1510 problem with a card half-mini Intel Ultimate N WiFi Link 5300 A/G/N (use the bluetooth as the third antenna antenna or buy you an additional antenna for this). It works very well with the M17x, has better connection speeds to strips of the 2.4 GHz and 5 GHz (this last has speeds really bad on the Broadcom/1510), it has not required to jump through the hoops to make it work properly and much more, it works with standard drivers and Intel maintains their drivers up to date. It is also much more reliable and faster as well, especially on the 5 GHz band, but also on the 2.4 GHz band.

    For more information on the subject of tweaking the settings of your Dell Wireless card, check out the official setting advanced properties: Dell Wireless WLAN Card User Guide.

    I hope that this guide will help you solve your Wi - Fi connection and allow you to enjoy speeds of complete wireless connection on your laptop Alienware M17x.

    Addendum: Quick links in this Guide

    Driver wireless Dell 5.60.18.8 version
    Download the driver for the Mini PCI Dell Wireless 1510 card used in this guide.

    Broadcom 943xx Wireless Driver version 5.60.18.41
    Download the latest Broadcom driver as an alternative to the Dell a little older driver who may or may not solve the problems more. Some have seen more success than with the 5.60.18.8 drivers with it (you need to use the 802.11n network adapter driver rather than at the entrance to Dell Wireless 1510 Wireless-N WLAN Mini Card in step II.15. the guide when you use this driver).

    Setting advanced properties: Dell Wireless WLAN card User Guide
    Reference Dell official Manual/Guide on the various properties Advanced Dell Wireless cards.

    Card Intel Ultimate N WiFi Link 5300 A/G/N Half-Mini
    Link to buy the demi-mini card Intel Ultimate N WiFi Link 5300 A/G/N of dell.com upgrade the crappy Wireless Dell 1510/Broadcom card that comes with the M17x.

    This Guide is a work in progress. I will update as I hear it.

    Feel free to link it in different threads to disseminate information.

  • 7520 HP loses the wireless connection. What can I do?

    I've seen lots of talk about HP products, loss of wireless connection.  I have the same problem with my 7520.  Initial Setup is perfect, but he began to lose the connection when it went into standby mode.  Someone at - it a solution?

    THERE IS A FAST SOLUTION!
    On April 18, 2014 (page 11 of this thread), I posted a quick solution. My HP7520 printer has worked on Netgear router WIFI 7550 flawless since then. I suggest you read this post.
    From long experience with HP, I found they have great hardware, but their software has always been dismal. The ultimate "fix" would be for HP address their failure of a software that allows to my difficulty in working.
    A single "tweak" in the router security settings wifi will do. The rest of settings changes other people have suggested are short lived (about an hour in most cases), while they don't be reconnected unless they restart everything. It makes sense because of what is happening.
    The single "twist" parameter should logically point HP programmers to where in the firmware, there is the problem. They listen to? And, really, it doesn't matter on all other settings printer and router. All mine are back to the default settings and it all still works very well.
    Go to a BBQ and stop wasting your time on this issue.
    Ken

  • Very limited wireless connection

    I have a HP Pavilion dv7 - 3153ca with a 64-bit windows system 7 and I'm only able to get a wireless connection when the laptop is very close to the modem. Once the laptop is moved, for example, to another floor of the House, the connection is lost and cannot be re established until I have the back next to the modem. He has no problem with the wired connection. This has happened while he was trying to pass my McAfee security provider, although I don't think this is the problem that my other laptop (a Dell) converted without this problem. The other laptop continues to maintain its connection Wireless throughout the House, so the router and the modem is not the issue. I downloaded and re-installed the adapter without modification. I have scanned the laptop and nothing is reported in the mess. Are there any ideas as to why the wireless connection works only when the laptop remains close to the modem? Thank you.

    It seems I may not have been very clear in my previous post.  I wanted to suggest was to reverse the connection of the antenna.  As mentioned in the thread I linked, the connections might have been reversed from what they should be from the factory.  If this is the case, then connect the antennas in a factory setting would not solve the problem.

    Have you tried to reverse the antennas?  If they are in the deformities, then this would fix it.  If they are in the right position, then the worst you would have (only in the deformities) would drop signal strength.

Maybe you are looking for

  • Video scam

    Pls help me to remove my video on yesterday 12 some time I was getting scam by here 300rm if not it will be shared at my member family and post on YouTube

  • HP Pavilion 17 - f005sr: enter administratonr password or power on password

    ЗДРАВСТВУЙТЕ! У МЕНЯ ПРОБЛЕМА Я УРОНИЛ СВОЙ НОУТБУК. Сейчас при запуске выскакивает вот эта надпись "enter administratonr or power on password password"! ПРОЛИСТАЛ ВЕСЬ ИНТЕРНЕТ!ПРЕДЛОГАЛИ OUT ВВЕСТИ КОДЫ, НО ОНИ НЕ ПОМОГАЛИ! НОУТБУК НА ГАРАНТИИ ПО Э

  • A small white page is dispalyed over my desktop shortcuts icons.

    Original title: Shortcut pages I have several icons on my desktop. A few days after I restarted my computer it is a small white page on all of my desktop shortcuts. The right image for the shortcut is always behind it, but this page of small white is

  • I have 99.3 MB 3.00 KB free on my disk (f) for hp_tools, how can I increase the space?

    I have 99.3 MB with 3.00 KB free on my (f drive for hp_tools, how can I increase the space? just in case it is needed for updating more than tools.)

  • A number of pixels inside another object by defining an object?

    Hello everyone, starting here.  I feel like this is a question with a simple answer, but I can't seem to find what I'm looking for, so I'll try to explain here.I want to know how to set an object a number of pixels (horizontally and vertically) insid