Bench memory not installed - start question

I have a Pavilion a6242n running Vista Home Premium.  A few months ago, it got to where I had to try several times to get the computer to boot when I turned it on (come to lights and fans on so I decided is was not a power supply problem).  I had to try many times more until he finally wouldn't start at all.  After reading a suggestion in this forum, I decided to remove the RAM sticks one at a time to see if it was my problem.  He initialized right upward when I removed the first stick.  The motherboard has 4 slots for RAM & came with a 512 MB stick in each of the first 2 slots (black) and a stick of 1 GB each of the 2nd 2 slots (blue) for a total of 3 GB.  Realizing that I'd get all the benefits of 4 GB of memory running Vista 32-bit, I always bought 2 sticks of 1 GB (240 pin DDR2, unbuffered PC2 5300 memory) Crucial since it was only $ 5 more than 2-512 sticks. I installed the new clubs in the 1st 2 slots.  Since then, the computer has started occasionally (not every time), but never stays on for more than an hour without a future BSOD.  I tried reseating the memory sticks and move the original 1 GB sticks to the first 2 slots.  At any given time while I move the sticks & them relocation several times, I can smell a burning smell.  Through troubleshooting, I decided that maybe the hard drive was bad, so I replaced that as well.  Since the departure of memory and any sticks I have where the installer has not recognized the first Bank of memory.  He says always "not installed".  Banks of memory 2-4 always show properly 1 GB of memory in each.  I tried to reset the bios by removing and replacing the battery on the MB and reset jumpers.

My question is this: this machine is able to start properly without the first Bank of memory?  I came to the conclusion that it is bad because it is not recognized not matter what memory is there.  May dispense with the extra memory, I don't know if I should spend more time and money trying to save this machine.  The crack can be repaired or replaced if it is a necessity for appropriate start?  I decided that if the motherboard needs to be replaced, I will buy a new computer.

Sorry to be too wordy; just try to give as much information as possible, so I can get a precise answer.  Thank you in advance for your help!

Hello

In response to your questions, it sounds like the first Bank location memory is dead and it is probably not useful, both financially or in practice, for repair - you would probably find that a new motherboard is cheaper anyway.

If the computer starts ok without this slot being usable, it might well continue to work for a while yet - I had a PC with a dead memory slot that lasted another 2 years!  However, if it is continually starts giving a BSOD on a regular basis, you would be wise to consider a new PC.

I hope this helps.

Best wishes and good luck,

DP - K

Tags: HP Desktops

Similar Questions

  • Update for Windows XP (KB2509553) security will not install starts but will not end

    Update for Windows XP (KB2509553) security is not installed

    Hi RogerGreene,

    1. Did you the latest changes on the computer?
    2. You are able to install some other updates on the computer?
    3. You have security software installed on the computer?
    4. You receive an error message when you try to install the update?

    Method 1

    I suggest that you manually download and install the update, check if it installs properly.

    Update security for Windows XP (KB2509553)

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=16350

    Method 2

    If the previous step fails then I would suggest that reset you the Windows Update components by default and then try to install the update.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

  • Windows Live Mail could not be started. 0 x 80041161. question of server 2008 in Vista (similar OS) forum

    Can't solve this one.  8 user accounts on Server 2008 std 64 bit TS, using the Protocol of the DRC. Load Windows Live, composing Mail only for all users. Properly configured the e-mail accounts for all users except one.  On this account while trying to open the Live Mail, we get:

    "Windows Live Mail could not be started.  It cannot be installed correctly. Make sure that your disk is not full or that you're not out of memory. 0 x 80041161."

    All accounts connect via thin clients with user, no HD local licenses. How it is possible for a single user? How to remove all traces of this user's e-mail account and try again? 7 other user accounts were active mail.  A possible cause would be my use of a registry cleaner (perhaps not a good idea because it was not necessary for a specific reason).  Otherwise, nothing unusual, all other services Terminal Server and programs work.  Impossible to find a link to how to erase our all that is giving only this user account for Live Mail error message.  Tried to take Windows Live and not reinstalled, pass.  All users have standard access, raise that this user admin didn't change error.  Appreciate the ideas.

    Hello

    The problem you are having is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

    Please post your question in the Technet Forum.

    You can follow this link to ask your question:

    http://social.technet.Microsoft.com/search/en-us/Windows?query=server%202008&refinement=1002&beta=0&AC=5

    For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  • Not enough (RAM) memory free to start treatment for Outlook services

    When I run Outlook 2007 SP2 and after getting my new one e-mail a notice appears of the outlook on the outlook bar icon to say tasks cannot start treatment services because there is not enough free memory to run this program (and it I do not see my new email). I added 2 GB of RAM and now have 6 GB in my Dell XPS 420 desktop computer. It has no effect on the error message. I'm running the 32-bit version of Windows Vista Ultimate SP2. In the physical memory in task manager, I show about 3100 MB in total, 1500 cache and 0 free. Don't know why the total would not be about 6 GB which is what is installed. What can I do to manage the memory or any other suggestions for the prospects for a return to normal?

    It turns out that the problem was with Outlook and not related to the memery computer. It was solved by going to features, programs and Control Panel, and then repair Microsoft office system 2007.  Thank you for all your help.

    Hello

    32-bit Edition of Windows Vista has a limit of 4 GB memory. If you have installed more than 4 GB, Vista will not read the extra memory.

    The question you have posted is related to Outlook and would be better suited to the office community. Please visit the link below to find a community that will support what ask you

    http://answers.Microsoft.com/en-us/Office/Forum/Outlook

  • OfficeJet Pro 8600 Plus: Scanner will not install software stopped working/Easy Start

    Unable to scan to computer, but has worked in the past. Error message indicates that the software HP for the Scan of the computer could not be located.  Have been trying to install it, it seems to be downloading but then says that it cannot install because no internet connection.  The connection is fine, works for everything else, shows very well in the status reports.  Tried several times, restarted the computer, nothing seems to work.

    Hi @SD58and welcome to the Forums of HP!

    I'd be happy to help you to install the software for your more than 8600. Using Safari or another browser? It seems strange to me that you can download the software, but then can not install, the installation requires no software. However, the Easy Start probably reaches out using internet to locate appreciate software to install. That being said, I feel the question could be linked so browser that I wonder what browser you use and if you could try another.

    Please let me know the result of using another browser and we can go from there. If using another browser resolves the issue, please click on accept as Solution to identify your post as solved.

    Thank you.

  • Outlook Express could not be started because MSOE. DLL could not be initialized. Outlook Express is not installed properly.

    Original title: could not open error on my outlook express Message

    When I try to open outlook express, I get the following two messages.  Outlook express could not be started.  The application is not in the message store outlook express.  Your computer may be out of memory or your disk is full. I cleaned the disk and I still get this message.  I also have another message saying Outlook express could not be started because MSOE.dll Outlook is not installed properly.

    Pleae help

    Is MS Outlook or Office installed also?

    If so, see this.

    See the reference by PA Bear in this thread
    http://social.answers.Microsoft.com/forums/en-us/xpnetwork/thread/a8c8cf17-d792-481e-BCCA-13b03852a995

    If Outlook is not installed:

    When OE crashes or won't start
    http://www.insideoe.com/problems/errors.htm#crash

    Bruce Hagen
    MS - MVP October 1, 2004 ~ September 30, 2010
    Imperial Beach, CA

  • HP Probook 440 2 How to change the BIOS to work around the memory not supported the start-up message

    Hi everyone, first I would like to say that I find the list of operating system for the less "interesting".

    Now, I bought a G2 to replace my 4441S.

    The problem is that the momory I had gave me a message as "memory not supported."

    very well, I bought new memory, same problem with 2 brands, so I it's maybe because I bought 'normal' memory and not DDR3l?

    The thing is that I need this memory quickly and I can't find DDR3L, now I use corsair Vengeance and I need more on the lan function but this message that allow me to use the computer if I press on enter, have no countdown with option by default and no BIOS settings so I want to change that and either add a timeout that starts the laptop or just disable this message , because it works, I use it now.

    I need that until I can find the DDR3L.

    Thank you.

    You don't seem to understand how it works with primary and secondary memory voltage settings schedule and bus. the laptop BIOS ROM file includes settings in its encoding of the memory modules that meet the compatibility requirements. If you install memory that has not been tested for compatibility, so it will not work or even it seems to work, it will be unstable.

    A BIOS of the laptop is quite unlike a BIOS that is present in a motherboard level amateur games. There are no timings adjustable and tensions to the timings of the memory or bus in a laptop BIOS BIOS standard voltages. It actually is to protect the owners from themselves.  You "do not 1.5 and 1.35. You can't change the setting of the voltage on the bus to do anything other than what is defined in the BIOS. If you install the module memory does not accept the voltage set by the BIOS code, then you are simply out of luck.

    Check out the BIOS Modding forums if you want to see what options may be made available.

  • SOS... Can not install CS5, Exit Code 7, required memory has not met, etc.

    I am looking for the installation of newly purchased CS5 Design Premium.  My system will not support InDesign so I unchecked that before trying to install. I ran to install under normal conditions and start, and the following messages occur in each...

    Exit code: 7 .... 0 fatal Error (s), 65 (s), 124 warning (s)

    WARNING: DW036: payload cannot be installed due to the failure of the operation depending on, and so on...

    and the first mistakes...

    ERROR: failed to update driver data. The driver entry has not been added. ARP estimated size 3726KB

    ERROR: DW050: the following payload errors were found during the installation:

    ERROR: DW050:-Adobe WinSoft Linguistics Plugin CS5: installation failed

    ERROR: DW050:-Adobe CS5 Infrastructure CSXS: installation failed

    ERROR: DW050:-SiteCatalyst NetAverages: installation failed.

    and so on, indicating all facilities had failed.

    My file system is journaled HFS +, (is this breaks?) with 30 GB free. I use a 32-bit with OS x 10.6.8 MacBook that I've been on with tech support where I bought the CS5 design premium. I have 1 GB of RAM, I was told by them that I need 2GB, the system requirements of the status box it needs 1 GB and this file says I need 500 MB.

    Is this something that would prevent my install and cause these install errors under the exit code 7?  The warning related to the failure of the operation dependent seems too generic with all.  I tried to get this program and running for a week and my work piling up, Please help or advise.  My head is spinning!

    Note: Please keep in mind that I'm new to Mac OS. I've always stuck with a Windows PC until recently. This is why some things are difficult for me to grasp at this point.

    THANKS FOR ANY HELP! SOS... Can not install CS5, Exit Code 7, required memory has not met, etc.

    I replied to not to install CS5 Design Premium - please help a novice!.  I'll lock this discussion to avoid two discussions on the same subject.

  • EU restore the computer today and now can't send email - message maybe not installed correctly, not enough memory - a lot of memory and this number

    , can not send email - message says may be installed incorrectly and

    EU restore the computer today and now can't send email - message maybe not installed correctly, not enough memory - a lot of memory and this number

    ox80070002.   What to do

    See www.oehelp.com/OETips.aspx#7 if you use OE and www.oehelp.com/WMUtil/ if you are using Windows Mail in Vista and you use Windows Live Mail, and then ask here: www.windowslivehelp.com

    Steve

  • Four updates (KB 2492386; 2515325; 2522422 982018) seem to settle down and complete the process at shutdown; However, at the start that they are not installed - Win7 64 + SP1

    Four updates (KB 2492386; 2515325; 2522422 982018) seem to settle down and complete the process at shutdown; However, at the start that they are not installed - Win7 64 + SP1.  Tried again several times since last week.

    BillBlackstone,

    KB982018 should be installed last, separately from other

    Install the 3 other updates manually

    Restart

    Back to updates of Windows and install KB982018

    Restart

    05/02 / 1108:16: 57 pm

  • Updates do not install, Sections of Vista does not and cannot start the Audio Service

    I try to install the updates on windows update but important as the service package 2 do not work, they start then stop and say failed code "WindowsUpdate_80070643"

    boxes keep popping up saying some files are damaged or not installed properly and that I should reinstall as a file call... system32\AVRT.dll. Windows Media is not no longer works.

    My Audio service is not running, I'm not sure that there is a problem in microsoft windows but the button to switch on the audio does not, and a box pops up saying it does not yet have another pop up says that everything works.

    any help? Please

    Hello
     
    a. updates have you tried to install?
    (b) button to switch on the audio of your computer are you using?
    c. what exactly happens when you try to run any audio/video file?

    You can try the steps outlined in the article below and check if this help.
    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

    For audio problem you are trying to run the troubleshooter which may help. It search common problems with your volume settings, your sound card or driver and your speakers or a headset.

    1. open the troubleshooting of Audio playback by clicking the Start button, then Control Panel.
    2. in the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on the audio playback problems. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

    You can also try to update check you and sound card driver if it works. The article below will help you do.

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Also, check if the following services are set to automatic.
    a. Windows Audio
    b. Windows Audio Endpoint Builder

    Here's how:
    1. click the Start button, type services.msc and press ENTER.
    2. go to any services mentioned above at the same time, right-click on it and select Properties
    3. click on the tab general, select automatic for startup type. Also click the Start button, if it is not started.
    4. click the Dependencies tab and make sure that all addictions services are set to automatic. Then click on the OK button.

    After return to that exact error messages we can help you better.

    Let us know if it works.

    Kind regards
    Umesh P - Microsoft Support

  • Error: 80070426-Windows Update may not install as Cryptographic Services does not start.

    Hello!

    As you can guess Windows Update is not installed for a few months. Cryptographic services does not start . CPP is the beginning.

    Error: 80070426

    Already tried a few suggestions MSKB.

    Method 2: Set Cryptographic Services to automatic, network logon. Result: Error (unsigned) 1083
    Method 3: Rename the Catroot2 folder
    Reregister DLL files that are associated with Cryptographic Services.
    However, suite couldn ' t be installed.

    regsvr32 initpki.dll
    regsvr32 gpkcsp.dll

    regsvr32 sccbase.dll
    regsvr32 slbcsp.dll

    DCOM service - access denied when running.

    sfc/scannow couldn't fix some corrupted files.

    Computer HP laptop came with Vista pre-installed, so I do not have the repair disk.

    No doubt the system restore won't help, as I remember recently that c-Cleaner wiped the old restore points.

    NOD32 Antivirus + Spyware Doctor still running. Already run MSRT and Super Spyware, but nothing much.

    Kindly help!

    Kind regards

    Satyajit

    Diagnostic report (1.9.0011.0):
    -----------------------------------------
    Given WGA-->
    Validation status: genuine
    Validation code: 0

    Code of Validation caching: 0x0
    Windows product key: *-* - GD2PK - BD3R2-44MV3
    The Windows Product Key hash: f7FPE6g/CLFmnJ4E6GbEU9Xn1sA =
    Windows product ID: 89572-OEM-7332166-00021
    Windows product ID type: 2
    Windows license Type: OEM SLP
    The Windows OS version: 6.0.6000.2.00010300.0.0.002
    ID: {5FC29B42-80DC-4BE3-B5EA-37281853FA7D} (3)
    Admin: Yes
    TestCab: 0x0
    WGA version: registered, 1.9.9.1
    Signed by: Microsoft
    Product name: Windows Vista (TM) Home Basic
    Architecture: 0x00000000
    Build lab: 6000.vista_gdr.080917 - 1612
    TTS Error: M:20091104073513946-
    Validation of diagnosis:
    Resolution state: n/a

    WgaER data-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: 6.0.6002.16398

    WGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 103 blocked VLK
    Microsoft Office Enterprise 2007 - 103 blocked VLK
    Microsoft Office Home and Student 2007-100 authentic
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_B4D0AA8B-920-80070057

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Win32)
    Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->
    [File mismatch: C:\Windows\system32\Slsvc.exe[6.0.6000.16509]
    [File mismatch: C:\Windows\system32\drivers\Spsys.sys[6.0.5840.16389]
    [File mismatch: C:\Windows\system32\Slcext.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\advapi32.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\kernel32.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\rpcrt4.dll[6.0.6000.16525]
    [File mismatch: C:\Windows\system32\authz.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\msvcrt.dll[7.0.6000.16386]
    [File mismatch: C:\Windows\system32\samlib.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\ntdsapi.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\dnsapi.dll[6.0.6000.16615]
    [File mismatch: C:\Windows\system32\ws2_32.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\nsi.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\user32.dll[6.0.6000.16438]
    [File mismatch: C:\Windows\system32\gdi32.dll[6.0.6000.16766]
    [File mismatch: C:\Windows\system32\msimg32.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\powrprof.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\setupapi.dll[6.0.6000.16609]
    [File mismatch: C:\Windows\system32\oleaut32.dll[6.0.6000.16609]
    [File mismatch: C:\Windows\system32\ole32.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\shell32.dll[6.0.6000.16774]
    [File mismatch: C:\Windows\system32\shlwapi.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\version.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\winmm.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\oleacc.dll[4.2.5406.0]
    [File mismatch: C:\Windows\system32\mmdevapi.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\wtsapi32.dll[6.0.6000.16553]
    [File mismatch: C:\Windows\system32\regapi.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\crypt32.dll[6.0.6000.16425]
    [File mismatch: C:\Windows\system32\msasn1.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\userenv.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\secur32.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\netapi32.dll[6.0.6000.16764]
    [File mismatch: C:\Windows\system32\psapi.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\netrap.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\wldap32.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\winbrand.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\iphlpapi.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\dhcpcsvc.dll[6.0.6000.16512]
    [File mismatch: C:\Windows\system32\winnsi.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\dhcpcsvc6.dll[6.0.6000.16512]
    [File mismatch: C:\Windows\system32\gpapi.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\slc.dll[6.0.6000.16509]
    [File mismatch: C:\Windows\system32\gpsvc.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\sysntfy.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\winsta.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\nlaapi.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\ncrypt.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\bcrypt.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\mpr.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\credui.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\cryptui.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\wintrust.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\imagehlp.dll[6.0.6000.16470]
    [File mismatch: C:\Windows\system32\dbghelp.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\mssign32.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\wininet.dll[7.0.6000.16809]
    [File mismatch: C:\Windows\system32\normaliz.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\iertutil.dll[7.0.6000.16809]
    [File mismatch: C:\Windows\system32\tapi32.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\rtutils.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\rasapi32.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\rasman.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\rasdlg.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\mprapi.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\activeds.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\adsldpc.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\atl.dll[3.5.2284.0]
    [File mismatch: C:\Windows\system32\certcli.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\winscard.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\netplwiz.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\urlmon.dll[7.0.6000.16809]
    [File mismatch: C:\Windows\system32\propsys.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\xmllite.dll[1.1.1002.0]
    [File mismatch: C:\Windows\system32\mlang.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\advpack.dll[7.0.6000.16809]
    [File mismatch: C:\Windows\system32\apphelp.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\msiltcfg.dll[4.0.6000.16386]
    [File mismatch: C:\Windows\system32\shunimpl.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\devmgr.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\newdev.dll[6.0.5054.0]
    [File mismatch: C:\Windows\system32\dwmapi.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\winspool.drv[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\cscapi.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\uxtheme.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\windowscodecs.dll[6.0.6000.16740]
    [File mismatch: C:\Windows\system32\ntshrui.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\feclient.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\shdocvw.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\browseui.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\imm32.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\msctf.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\duser.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\winsxs\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.6000.16386_none_9ea0ac9ec96e7127\gdiplus.dll[5.2.6000.16386]
    [File mismatch: C:\Windows\winsxs\amd64_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.6000.16550_none_56f0fd51b4f462f8\gdiplus.dll[hr = 0 x 80070002]
    [File mismatch: C:\Windows\system32\msrating.dll[7.0.6000.16386]
    [File mismatch: C:\Windows\system32\ieframe.dll[7.0.6000.16809]
    [File mismatch: C:\Windows\system32\msi.dll[4.0.6000.16386]
    [File mismatch: C:\Windows\system32\mshtml.dll[7.0.6000.16809]
    [File mismatch: C:\Windows\system32\msls31.dll[3.10.349.0]
    [File mismatch: C:\Windows\winsxs\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.6000.16386_none_87e0cb09378714f1\comctl32.dll[5.82.6000.16386]
    [File mismatch: C:\Windows\winsxs\amd64_microsoft.windows.common-controls_6595b64144ccf1df_5.82.6000.16386_none_40339432230aebeb\comctl32.dll[hr = 0 x 80070002]
    [File mismatch: C:\Windows\system32\comdlg32.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\printui.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\cfgmgr32.dll[6.0.6000.16609]
    [File mismatch: C:\Windows\system32\puiapi.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\hlink.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\imgutil.dll[7.0.6000.16386]
    [File mismatch: C:\Windows\system32\usp10.dll[1.626.6000.16386]
    [File mismatch: C:\Windows\system32\inetcomm.dll[6.0.6000.16669]
    [File mismatch: C:\Windows\system32\msoert2.dll[6.0.6000.16480]
    [File mismatch: C:\Windows\system32\ieui.dll[7.0.6000.16809]
    [File mismatch: C:\Windows\system32\efsadu.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\mfc42u.dll[6.6.8063.0]
    [File mismatch: C:\Windows\system32\odbc32.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\oledlg.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\linkinfo.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\query.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\clbcatq.dll[2001.12.6930.16386]
    [File mismatch: C:\Windows\system32\cabinet.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\scecli.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\w32topl.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\rpchttp.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\winhttp.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\fwpuclnt.dll[6.0.6000.16386]
    [File mismatch: C:\Windows\system32\ktmw32.dll[6.0.6000.16386]

    Other data-->
    Office details: {5FC29B42-80DC-4BE3-B5EA-37281853FA7D}1.9.0011.06.0.6000.2.00010300.0.0.002x 32*-*-*-*-44MV389572-OEM-7332166-000212S-1-5-21-3747016915-1105364745-1034703816Hewlett-Packardlaptop Presario V6500 Hewlett-PackardF.2A 20080222000000.000000 + 000A4313507018400EE40090409India Standard Time(GMT+05:30)03HPQOEMSLIC-MPC10310312C0A25836FDBE5ACFmDbcrRY1pTOcrz4ZUZRHhpUuc0 = Microsoft Office Enterprise 2007 89388 726-2958074-6564314100Microsoft Office home and Student 20071219

    Spsys.log Content: U1BMRwEAAAAAAQAABAAAAC58AgAAAAAAYWECADAgAADCBCA/81zKARhDs/4hWdo7Xkl9D+HKpni6Sfv7jmoHEBVqqW/xcrQYytms9RtRtLWsIPXcLJpmwOfDvX0zCybmDilyQLttVIyTRhimAiUiBLOYhz3eEQj3sEGnmR0ReJ9KlWCJouxq6PAIwHwHVMfvNauSbFvmaTCDPKtQZQFIQcDXIAwFGl6D9S/GUDYecePFRKM/leS97bxOVVm9fICZUkfHdDNbo72qUqYYmAlRJO05+WV1r70w2O6Pl99gqTnSYR4j0FashTOQ1ifb1stzrqx+w3WNaAwzkNYn29bLc66sfsN1jWgMM5DWJ9vWy3OurH7DdY1oDDOQ1ifb1stzrqx+w3WNaAw=

    License data-->
    The software licensing service version: 6.0.6000.16509
    Name: Windows Vista HomeBasic edition
    Description: operating system Windows - Vista, channel OEM_SLP
    Activation ID: 199086aa-6cb8-4e5b-b698-f2be56f1e8ee
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 89572-00146-321-600021-02-16393-6000.0000-0492008
    Installation ID: 234075993312598255872244522405847072649516093605215141
    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkId=57201
    The machine certificate URL: http://go.microsoft.com/fwlink/?LinkId=57203
    Use license URL: http://go.microsoft.com/fwlink/?LinkId=57205
    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkId=57204
    Partial product key: 44MV3
    License status: licensed

    --> HWID data
    Current Hash HWID: QAAAAAEABwABAAIAAgABAAAAAwABAAEAnJ9ERYTHdhu84yC + gASIzAaYmGC6ZEQsznDy9J4v6lrYfiqsrFZ4qg is

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes
    Windows marker version: 0 x 20000
    OEMID and OEMTableID consistent: Yes
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    APIC APIC PTLTD
    FACP NVIDIA MCP67-M
    SRAT AMD HAMMER
    HPET PTLTD HPETTBL
    START PTLTD $SBFTBL$
    MCFG MCFG PTLTD
    TCPA Phoenix x
    SSDT PTLTD POWERNOW
    SLIC SLIC-MPC HPQOEM

    Thank God!

    Finally, I worked it out myself. But it's painful to watch than virtually any other that Uday has responded to my problem. Something I've been waiting for so eagerly.

    I applied my common sense and defragmented the dirives then sfc/scannow, and it worked. Cryptographic Services said when I began to log in as network account. So my problem is solved. Now, windows update works fine.

    Interestingly, Microsoft Fix it, says it cannot start the Cryptographic Services. Are God, while the _____ you supposed to difficulty? It made Internet Explorer icon on my desktop and other places.

  • I use XP and when I try to open Outlook Express I get this message. "Outlook Express could not be started because MSOE." DLL could not be initialized. Outlook Express is not installed properly

    Last night, everything seemed normal. When I try to open Outlook Express, I get this message. "Outlook express could not be started.  The application could not open message store outlook express.  Your computer may be out of memory or your disk is full.  Contact Microsoft Support for assistance. (0x800700C1, 193) "after this message, the message above was posted. I bought and ran a program called FixCleaner with the same results. I also cleaned my disk and more 66 G remains to use and have a lot of available memory.

    Thank you all for your help, but I gave up and took it to my computer guru and fixed it. He said there where a few old accounts in the computer and registry was messed up and it solved the problem and now it works.

    THANKS again!

  • Outlook Express could not be started. The application was unable to initialize the store directory. Your computer may be out of memory or your disk is full. Error code: 0 x 80007114

    Operating system Windows XP, at startup, I get the message: "Outlook Express could not be started. The application was unable to initialize the store directory. Your computer may be out of memory or your disk is full"and displays the error code: 0 x 80007114.  (I have a new drive hard with enough space) Outlook Express always open well and functioning normally.  The message mentions and how to fix the problem?  Thank you, Rick

    Jump here (nothing Bruce suggested is false), I did a search and found this old article (http://support.microsoft.com/kb/245419), which indicates that there is a bad entry under the identity key in the registry (see www.oehelp.com/backup.aspx for background).  So if it's a big problem, you can do the steps suggested in this article and that will fix it.  Or if you have just one account, then backup your settings and the identity key and then delete the identity key and then start OE and it will establish a new, and you can then set up your account again, and then import the messages from the older directory.  But it does not indicate the major corruption, so you can just ignore it.

    Steve

  • Help start the old computer system32/hal.dll error not installed bugs not working-

    I want to transfer files from your old computer to new computer with Vista Easy Transfer.  In an attempt to start former computer, received the system32\hal.dll error.  I followed the instructions to fix proglem reboot, press / hold down f8, etc., but that has not worked.  I could reinstall the operating system Microsoft Windows XP Professional, including Service Pack 1. But if I do then I lose all files, documents, photos, everything from the old computer... at least, I think it's going to happen.  Can you tell me what are my options to ensure that I don't lose any of my data.

    This behavior can occur if one or some of the following conditions are true:

    By default in the [Boot Loader] section of the Boot.ini file is missing or invalid.

    Windows XP is not installed in the location specified in the Boot.ini file.

    The Ntoskrnl.exe file is missing or damaged.

    The path of partition in the Boot.ini file is not set correctly.

    General failure.

    The article below should help you solve this problem.

    Error message: "Windows did not start because of a configuration of the disk of the computer problem.

    http://support.Microsoft.com/kb/314477

    You must have a Windows XP installation disk to perform the steps listed in the article above.

    Hope this helps

    Post back if necessary

    ___________________________________________________________

    If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for