Best practices for the .ini file, reading

Similar Questions

• Best practices for the compression of the image in dps

  Hello! I read up on best practices for the compression of the image in dps and I read the asset from the source of panoramas, sequences of images, Pan and zoom images and audio skins is resampled not downloading. You will need to resize them and compress them before deleting the in your article, because the dps do not do it for you. Hey can do!

  So Im also read as he active source of slideshows, scrolling images, and buttons ARE resampled as PNG images. Does this mean that DPS will compress for you when you build the article? Does this say I shouldn't worth going bother to resize these images at all? I can just pop in 300 DPI files 15 MB used in the print magazine and dps will compress their construction article - and this will have no effect on the size of the file?

  And this is also the case with static background images?

  
  

  Thanks for your help!

  All images are automatically resampled to based on the size of the folio you do. You can put in any image resolution you want, it's not serious.

  Neil

• vSpere 5 Networking of best practices for the use of 4 to 1 GB NIC?

  Hello

  I'm looking for a networking of best practices for the use of 4-1 GB NIC with vSphere 5. I know there are a lot of good practice using 10 GB, but our current config does support only 1 GB. I need to include the management, vMotion, Virtual Machine (VM) and iSCSi. If there are others you would recommend, please let me know.

  I found a diagram that resembles what I need, but it's for 10 GB. I think it works...

  (I had this pattern HERE - rights go to Paul Kelly)

  My next question is how much of a traffic load is each object take through the network, percentage wise?

  For example, 'Management' is very small and the only time where it is in use is during the installation of the agent. Then it uses 70%.

  I need the percentage of bandwidth, if possible.

  If anyone out there can help me, that would be so awesome.

  Thank you!

  -Erich

  Without knowing your environment, it would be impossible to give you an idea of the uses of bandwidth.

  That said if you had about 10-15 virtual machines per host with this configuration, you should be fine.

  Sent from my iPhone

• best practices for the storage of the vm and vhd

  no doubt this question has been answered not once... Sorry

  I would like to know the best practice for the storage of the vm and its virtual hard disk to a SAN.

  Any show advantage does make sense to keep them on separate LUNS?

  Thank you.

  It will really depend on the application of the virtual machine - but for most of the applications no problem by storing everything on the same data store

• What is the best practice for the enumeration for the ADF?

  Dear all,
  
  What is the best practice for the enumeration for the ADF?
  
  I need to add the enumeration to my request. ex: sex, marital status.
  
  How to deliver? Declarative custom components or is there another way?
  
  Thank you.
  Angelique

  Check out this topic - '5.3 fill view object Rows with static data' in Guide of Dev
  http://download.Oracle.com/docs/CD/E17904_01/Web.1111/b31974/bcquerying.htm#CEGCGFCA

• Best practices for the use of reserved words

  Hello
  What is the best practice for the use of the reserved words as column names.
  For example if I insisted on the use of the word to a column name comment as follows:
  
  CREATE TABLE...
  VARCHAR2 (4000) "COMMENT."
  ...
  
  What is the impact on the track I could expect and what problems should I be informed when doing something like that?
  
  Thank you
  Ben

  The best practice is NOT to use reserved words anywhere.
  Developers are human beings human. Humans have their moments to forget things.
  They will not forget to use the "", or you can force it to use the "' everywhere.
  The two methods are Oracle certified ways to end up in hell.

  ----------
  Sybrand Bakker
  Senior Oracle DBA

• Best practices for the application of sharpness in your workflow

  Recently I tried to get a better understanding of some of the best practices for sharpening in a workflow. I guess that I didn't know, but there are several places to sharpen. Who are the best? They are additive?

  My typical workflow involves capture an image with a professional DSLR in RAW or JPEG or import into Lightroom and export to a JPEG file for the screen or printing of two lab and local. 

  There are three places in this workflow to add sharpening. In the DSLR manually into Lightroom and when exporting a JPEG file or print directly from Lightroom

  It is my understanding that sharpening is added to RAW images even if you add sharpening in your DSLR. However sharpening will be added to the JPEG from the camera. 

  Back to my question, it is preferable to manually the sharpness in the SLR in Lightroom or wait until you export or output of your printer or final JPEG file. And additive effects? If I add sharpening to the three places I am probably more sharpening?

  You have to treat them differently both formats. Data BULLIES never have any sharpening applied by the camera, only JPEG files. Sharpening is often considered to be a workflow where there are three steps (see here for a seminal paper on this idea).

  I. a step sharpening of capture which compensates for the loss of sharp in detail due to the Bayer matrix and the filter anti-repliement and sometimes the lens or diffraction.

  II. A creative sharpening step where some details in the image are 'highlighted' sharpness (do you eyelashes on a model's face), and

  III. output sharpening, where you fix the loss of sharpness due to the scale/resampling for the properties of the average output (as blur because of an impression how process works or blurry because of the way that a screen LCD sets out its pixels).

  These three are implemented in Lightroom. I. and II. are essential, and basically must always be performed. II. until your creative minds. I. is the sharpening that see you in the Panel to develop. You need zoom at 1:1 and optimize the settings. The default settings are OK but quite conservative. Usually you can increase the value of the mask a little so that you're not sharpen noise and play with the other three sliders. Jeff Schewe gives an overview of a strategy simple to find the optimal settings here. It is for the cab, but the principle remains the same. Most of the photos will benefit from optimization a bit. Don't go overboard, but just OK for smoothness to 1:1.

  Stage II as I have said, is not essential, but it can be done using the local adjustment brush, or you can go to Photoshop for this. Stage III, however, is very essential. This is done in the export, the print panel Panel or the web. You can't really get a glimpse of these things (especially the sharpening printing-oriented) and it will take a little experimentation to see what you like.

  For jpeg, sharpening is done already in the camera. You could add a small extra capture sharpening in some cases, or simply lowering the sharpening in camera and then have more control in the post, but generally, it is best to leave it alone. Stage II and III, however, are still necessary.

• Best practices for the integration of the Master Data Management (MDM)

  I work on the integration of MDM with Eloqua and are looking for the best approach to sync data lead/Contact changes of Eloqua in our internal MDM Hub (output only). Ideally, we would like that integration practically in real time but my findings to date suggest that there is no option. Any integration will result in a kind of calendar.

  Here are the options that we had:

  1. "Exotic" CRM integration: using internal events to capture and queue in the queue changes internal (QIP) and allows access to the queue from outside Eloqua SOAP/REST API
  2. Data export: set up a Data Export that is "expected" to run on request and exteernally annex survey via the API SOAP/REST/in bulk
  3. API in bulk: changes in voting that has happened since the previous survey through the API in bulk from Eloqua outside (not sure how this is different from the previous option)

  Two other options which may not work at all and who are potentially antimodel:

  • Cloud connector: create a campaign questioning changes to schedule and configure a connector of cloud (if possible at all) to notify MDM endpoint to query contact/lead "record" of Eloqua.
  • "Native" integration CRM (crazy): fake of a native CRM endpoint (for example, Salesforce) and use internal events and external calls to Eloqua push data into our MDM

  Issues related to the:

  1. What is the best practice for this integration?
  2. Give us an option that would give us the close integration in real-time (technically asynchronous but always / event-based reminder)? (something like the outgoing in Salesforce e-mail)
  3. What limits should consider these options? (for example API daily call, size response SOAP/REST)

  If you can, I would try to talk to Informatica...

  To imitate the integrations of native type, you use the QIP and control what activities it validated by internal events as you would with a native integration.

  You will also use the cloud api connector to allow you to set up an integration CRM (or MDM) program.

  You have fields of identification is added objects contact and account in Eloqua for their respective IDs in the MDM system and keep track of the last update of MDM with a date field.

  A task scheduled outside of Eloqua would go to a certain interval and extract the QAP changes send to MDM and pull the contacts waiting to be sent in place of the cloud connector.

  It isn't really much of anything as outgoing unfortunately use Messaging.  You can send form data shall immediately submit data to Server (it would be a bit like from collections of rule of integration running of the steps in processing of forms).

  See you soon,.

  Ben

• Measurement on the side time server? Best practices for the turn-based game

  Hello

  What would be the best practice for measuring time in a turn based game?

  I was looking at the timeout of the room, but to use that it would mean that, for each round, I put users in a new room?

  Is there a way where I can measure time serverside and keep users in the same room?

  If so, I could use php, otherwise, we would need java that allows to measure a time race.

  See you soon,.

  G

  Hello

  You can definitely use PHP or Java - we provide integration of server

  libraries for either. I don't know exactly what is the use case, so I can't

  comment on what makes the most sense, but if it is not information which must be

  totally secure, grading on the client can be a viable approach also.

  Nigel

• Best practices for the reader to 'Data' between VM?

  Hello

  So on my box ESXI, I have a 250 GB drive. I was wondering what the best practice is to have a 'data' drive shared between VM? I'm pretty new to virtualization so would like to view

  I would basically following drive configuration...

  Win 2008 R2 - 60 gb

  Win 2008 R2 - 60 gb

  Ubuntu 10.10 - 20 GB

  (Shared between the two areas of 2008) DATA - 100 GB

  Thank you.

  The only way to do this is to assign the drive to a virtual machine and create a network share. Unless you use a file system that supports concurrent access to files, an attempt to present the disk to several systems would probably end by the corruption of data.

  André

• Best practices for the parameter of ARCH_LAG_TARGET and DBWR CHECKPOINT database

  Hello
  
  Concerning best practices - I need to know - what is recommended or guidelines for these 2 settings of databases.
  
  I found for ARCH_LAG_TARGET, Oracle recommends he set to 1800 seconds (30 minutes)
  
  Maybe someone can guide me with these 2 settings...
  
  See you soon

  Dear unsolaris,

  First of all if you want to follow the full and incremental control points, make the LOG_CHECKPOINT_TO_ALERT TRUE parameter. You will see the checkpoint YVERT and deadlines.

  Full checkpoint is triggered when a log switch occurs and the position of the point of control in the controlfile is written in the data file headers. For just a really little amount of time, the database could be consistent even if it is open and in read/write mode.

  ARCH_LAG_TARGET setting is disabled and the value 0 by default. Here is the definition for this parameter;

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14237/initparams009.htm

  If you want to set this parameter to the top of the Oracle recommends that it be 1800 as you said. This may subject to change database database and it is better for you to check it out for who suffer.

  Kind regards.

  Ogan

• to access the QML attached objects in C++ and best practices for the handling of the user interface in classes

  Hello

  I have in fact 2 queries

  (1) how can we access attachedobjects defined in QML in C++?

  (2) I'm loving development on Blackberry 10 C++ is one of my favorites. But I'm a bit lost when it comes to managing the user interface in classes. For example when we create the project through momentics we have a class called ApplicationUI. It manages all the (default) user interface commands, we in C++. as for example creating the document qml and setting as root user interface, etc. I am now working on an app that have NavigationPane as root, and then I continue to push pages (like the screens). But now the code for all pages is inside my ApplicationUI. What is the best practice to keep the UI for each page logic in a separte C++ class?

  I also develop for Android that a separate class for each activity, this code does not mingle for each activity. Please guide me how can I keep logic of user interface of each Page into a separate class of C++?

  regarding your second question:
  I think this is the simplest approach to keep all things in the UI in QML. You can easily put things into separate files.

  If you want to use c ++ to the user interface: can be done, too. just put it in separate classes and include those in your application class.

• Best practices for the webinar Landing Pages

  We are developing a landing page that hosts several seminars online and want to get an idea of how others have done it.  Here's our scenario:

  PLAN:

  We push an email highlighting a webinar.  Clients fill out the form for this specific webinar and for sending the email with the link, the landing page is redirected to a list of other webinars to choose (previously registered or not).

  QUESTIONS RELATING TO THE:

  Did anyone done this before? How to follow Webinars a person clicks - through? There must be a better way than to have a person to submit a form to watch/attend each webinar.

  Also, can you do activity driven or landing page upside DOWN so that it lists only webinars which it has not already chosen or read?

  Can't wait to hear your best practices! Thanks for sharing.

  Hi Julia,

  You have at least two options for the capture of submission of form to your visitors without them knowingly send a form:

  1. If your confirmation page is hosted in Eloqua, you can use the links send blind form to these other Webinars. There is an article on Topliners here on how to install this feature to write links, but it's actually the same with regard to links to landing pages: trigger actions multiple with a click-through email (via 'send blind form').

  2. use "gated forms. You can apply this technique on all the forms on your site - the visitor will have to submit the form to get the first active, but each subsequent active form is hidden (a concept similar to sending blind form, they just see a link). Generally speaking, customers chose to have a consultant Eloqua build the frame (you can easily maintain over time when you add new assets), or you can build it yourself by following the related step by step guide to this post Eloqua Artisan.

  With the help of a form submission to capture these clicks gives you the opportunity to enjoy all of these smart actions of processing steps and get a tracking more than just using a regular.

  For your second question regarding conditionalizing links so that only those that have not been visited show - I recommend you really against that. What happens if your visitor wants to go back to the link, how can they access it? Leave it to the browser and use different colors for non visited compared to visited links.

  Gaia

• Best practices for the Vm disk partitioning

  I want to create a server of Windows 2012 by c:\ and d:\ partitions what the best practice it is btw SQL database server. Should I create a hd c: and then add another hd d:\ all on the same data store. I read that the use of applications and partitioning tools is more metal applications for real and to create a virtual machine two separate readers would be too easy and better recovery or future expansion on the drive.

  Thank you

  Mike

  Note: Discussion moved successfully to vSphere SDK comments on Virtual Machine & Guest OS
  Yes, create a separate virtual disk (VMDK) for each partition or volume under Windows. If the workload is light - to begin with, you can leave all VMDK in working area of the virtual machine and then if you need to divide the discs in different data stores you can do it later.
  What can talk you about your workload and virtual infrastructure you have - you what version of vSphere are registered for the?

• Best practices for the services-config ADEP

  I need to develop a services - config.xml to connect to my project of the ADEP LCD screens.  Are there best practices I should be informed regarding the ADEP / interaction of LCDs in that regard?

  Thanks in advance!

  Hi Mike. You can use the CRXDE Lite Editor to modify the services - config.xml for a Data Services application that is deployed on the server of the experience.

  When you're in CRXDE Lite, go to:

  / etc/ASP/config/dataservices/services-config. XML

  Open the services - config.xml, make your changes and click Save all.

  After that, when you create a new 'Flex for ADEP experience Services' project in Flash Builder, the channelset-config information is copied in the services - config.xml in a config.xml file file - channelset is added to the directory of your Flex dataservices project and is also added to your project mxmlc compiler options.